diff options
| author |   Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> | 2022-08-31 11:26:52 +0300 |
|---|---|---|
| committer |   Robert Foss <robert.foss@linaro.org> | 2022-09-02 18:17:59 +0200 |
| commit | e43d5864f36ab32f831b1af7bc2171031e58e2ac (patch) | |
| tree | c07a3df7f11d4451b2bda606063f5f498dbe9973 /drivers/gpu/drm/bridge | |
| parent | drm/bridge: ti-sn65dsi86: Reject modes with too large blanking (diff) | |
| download | linux-dev-e43d5864f36ab32f831b1af7bc2171031e58e2ac.tar.xz linux-dev-e43d5864f36ab32f831b1af7bc2171031e58e2ac.zip | |
drm/bridge: ti-sn65dsi86: Support DisplayPort (non-eDP) mode
Despite the SN65DSI86 being an eDP bridge, on some systems its output is
routed to a DisplayPort connector. Enable DisplayPort mode when the next
component in the display pipeline is detected as a DisplayPort
connector, and disable eDP features in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reworked to set bridge type based on the next bridge/connector.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
--
Changes since v1/RFC:
- Rebased on top of "drm/bridge: ti-sn65dsi86: switch to
devm_drm_of_get_bridge"
- eDP/DP mode determined from the next bridge connector type.
Changes since v2:
- Remove setting of Standard DP Scrambler Seed. (It's read-only).
- Prevent setting DP_EDP_CONFIGURATION_SET in
ti_sn_bridge_atomic_enable()
- Use Doug's suggested text for disabling ASSR on DP mode.
Changes since v3:
- Remove ASSR_CONTROL definition
Changes since v4:
- Refactor code to configure the DP/eDP scrambler in one place.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220831082653.20449-3-tomi.valkeinen@ideasonboard.com
Diffstat (limited to 'drivers/gpu/drm/bridge')
| -rw-r--r-- | drivers/gpu/drm/bridge/ti-sn65dsi86.c | 21 |
1 files changed, 18 insertions, 3 deletions
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index 09d3c65fa2ba..6e053e2af229 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -92,6 +92,8 @@ #define SN_DATARATE_CONFIG_REG 0x94 #define DP_DATARATE_MASK GENMASK(7, 5) #define DP_DATARATE(x) ((x) << 5) +#define SN_TRAINING_SETTING_REG 0x95 +#define SCRAMBLE_DISABLE BIT(4) #define SN_ML_TX_MODE_REG 0x96 #define ML_TX_MAIN_LINK_OFF 0 #define ML_TX_NORMAL_MODE BIT(0) @@ -1070,12 +1072,23 @@ static void ti_sn_bridge_atomic_enable(struct drm_bridge *bridge, /* * The SN65DSI86 only supports ASSR Display Authentication method and - * this method is enabled by default. An eDP panel must support this + * this method is enabled for eDP panels. An eDP panel must support this * authentication method. We need to enable this method in the eDP panel * at DisplayPort address 0x0010A prior to link training. + * + * As only ASSR is supported by SN65DSI86, for full DisplayPort displays + * we need to disable the scrambler. */ - drm_dp_dpcd_writeb(&pdata->aux, DP_EDP_CONFIGURATION_SET, - DP_ALTERNATE_SCRAMBLER_RESET_ENABLE); + if (pdata->bridge.type == DRM_MODE_CONNECTOR_eDP) { + drm_dp_dpcd_writeb(&pdata->aux, DP_EDP_CONFIGURATION_SET, + DP_ALTERNATE_SCRAMBLER_RESET_ENABLE); + + regmap_update_bits(pdata->regmap, SN_TRAINING_SETTING_REG, + SCRAMBLE_DISABLE, 0); + } else { + regmap_update_bits(pdata->regmap, SN_TRAINING_SETTING_REG, + SCRAMBLE_DISABLE, SCRAMBLE_DISABLE); + } bpp = ti_sn_bridge_get_bpp(connector); /* Set the DP output format (18 bpp or 24 bpp) */ @@ -1241,6 +1254,8 @@ static int ti_sn_bridge_probe(struct auxiliary_device *adev, pdata->bridge.funcs = &ti_sn_bridge_funcs; pdata->bridge.of_node = np; + pdata->bridge.type = pdata->next_bridge->type == DRM_MODE_CONNECTOR_DisplayPort + ? DRM_MODE_CONNECTOR_DisplayPort : DRM_MODE_CONNECTOR_eDP; drm_bridge_add(&pdata->bridge); |