drm/i915/display: Eliminate most usage of INTEL_GEN()

Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN()
in the display code to use DISPLAY_VER() comparisons instead.  The
following semantic patch was used:

        @@ expression dev_priv, E; @@
        - INTEL_GEN(dev_priv) == E
        + IS_DISPLAY_VER(dev_priv, E)

        @@ expression dev_priv; @@
        - INTEL_GEN(dev_priv)
        + DISPLAY_VER(dev_priv)

        @@ expression dev_priv; expression E; @@
        - IS_GEN(dev_priv, E)
        + IS_DISPLAY_VER(dev_priv, E)

        @@
        expression dev_priv;
        expression from, until;
        @@
        - IS_GEN_RANGE(dev_priv, from, until)
        + IS_DISPLAY_RANGE(dev_priv, from, until)

There are still some display-related uses of INTEL_GEN() in intel_pm.c
(watermark code) and i915_irq.c.  Those will be updated separately.

v2:
 - Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers.  (Jani)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com

1 files changed, 6 insertions, 6 deletions

diff --git a/drivers/gpu/drm/i915/display/intel_overlay.c b/drivers/gpu/drm/i915/display/intel_overlay.c
index ef8f44f5e751..9211f6c97b26 100644
--- a/drivers/gpu/drm/i915/display/intel_overlay.c
+++ b/drivers/gpu/drm/i915/display/intel_overlay.c
@@ -550,7 +550,7 @@ static u32 calc_swidthsw(struct drm_i915_private *dev_priv, u32 offset, u32 widt
 {
 	u32 sw;
 
-	if (IS_GEN(dev_priv, 2))
+	if (IS_DISPLAY_VER(dev_priv, 2))
 		sw = ALIGN((offset & 31) + width, 32);
 	else
 		sw = ALIGN((offset & 63) + width, 64);
@@ -794,7 +794,7 @@ static int intel_overlay_do_put_image(struct intel_overlay *overlay,
 			oconfig |= OCONF_CC_OUT_8BIT;
 		if (crtc_state->gamma_enable)
 			oconfig |= OCONF_GAMMA2_ENABLE;
-		if (IS_GEN(dev_priv, 4))
+		if (IS_DISPLAY_VER(dev_priv, 4))
 			oconfig |= OCONF_CSC_MODE_BT709;
 		oconfig |= pipe == 0 ?
 			OCONF_PIPE_A : OCONF_PIPE_B;
@@ -913,7 +913,7 @@ static void update_pfit_vscale_ratio(struct intel_overlay *overlay)
 	/* XXX: This is not the same logic as in the xorg driver, but more in
 	 * line with the intel documentation for the i965
 	 */
-	if (INTEL_GEN(dev_priv) >= 4) {
+	if (DISPLAY_VER(dev_priv) >= 4) {
 		/* on i965 use the PGM reg to read out the autoscaler values */
 		ratio = intel_de_read(dev_priv, PFIT_PGM_RATIOS) >> PFIT_VERT_SCALE_SHIFT_965;
 	} else {
@@ -1028,7 +1028,7 @@ static int check_overlay_src(struct drm_i915_private *dev_priv,
 
 	if (rec->stride_Y & stride_mask || rec->stride_UV & stride_mask)
 		return -EINVAL;
-	if (IS_GEN(dev_priv, 4) && rec->stride_Y < 512)
+	if (IS_DISPLAY_VER(dev_priv, 4) && rec->stride_Y < 512)
 		return -EINVAL;
 
 	tmp = (rec->flags & I915_OVERLAY_TYPE_MASK) == I915_OVERLAY_YUV_PLANAR ?
@@ -1255,7 +1255,7 @@ int intel_overlay_attrs_ioctl(struct drm_device *dev, void *data,
 		attrs->contrast   = overlay->contrast;
 		attrs->saturation = overlay->saturation;
 
-		if (!IS_GEN(dev_priv, 2)) {
+		if (!IS_DISPLAY_VER(dev_priv, 2)) {
 			attrs->gamma0 = intel_de_read(dev_priv, OGAMC0);
 			attrs->gamma1 = intel_de_read(dev_priv, OGAMC1);
 			attrs->gamma2 = intel_de_read(dev_priv, OGAMC2);
@@ -1279,7 +1279,7 @@ int intel_overlay_attrs_ioctl(struct drm_device *dev, void *data,
 		update_reg_attrs(overlay, overlay->regs);
 
 		if (attrs->flags & I915_OVERLAY_UPDATE_GAMMA) {
-			if (IS_GEN(dev_priv, 2))
+			if (IS_DISPLAY_VER(dev_priv, 2))
 				goto out_unlock;
 
 			if (overlay->active) {