drm/i915/backlight: split out backlight registers to a separate file

Declutter i915_reg.h by splitting backlight registers to a separate
file. Also include the utility pin definitions, even though they are
used for non-backlight things too.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220815094838.3511723-1-jani.nikula@intel.com

1 files changed, 0 insertions, 112 deletions

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index ad2c441aceca..50d7bfd541ad 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2925,118 +2925,6 @@
 
 #define PFIT_AUTO_RATIOS _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61238)
 
-#define _VLV_BLC_PWM_CTL2_A (DISPLAY_MMIO_BASE(dev_priv) + 0x61250)
-#define _VLV_BLC_PWM_CTL2_B (DISPLAY_MMIO_BASE(dev_priv) + 0x61350)
-#define VLV_BLC_PWM_CTL2(pipe) _MMIO_PIPE(pipe, _VLV_BLC_PWM_CTL2_A, \
-					 _VLV_BLC_PWM_CTL2_B)
-
-#define _VLV_BLC_PWM_CTL_A (DISPLAY_MMIO_BASE(dev_priv) + 0x61254)
-#define _VLV_BLC_PWM_CTL_B (DISPLAY_MMIO_BASE(dev_priv) + 0x61354)
-#define VLV_BLC_PWM_CTL(pipe) _MMIO_PIPE(pipe, _VLV_BLC_PWM_CTL_A, \
-					_VLV_BLC_PWM_CTL_B)
-
-#define _VLV_BLC_HIST_CTL_A (DISPLAY_MMIO_BASE(dev_priv) + 0x61260)
-#define _VLV_BLC_HIST_CTL_B (DISPLAY_MMIO_BASE(dev_priv) + 0x61360)
-#define VLV_BLC_HIST_CTL(pipe) _MMIO_PIPE(pipe, _VLV_BLC_HIST_CTL_A, \
-					 _VLV_BLC_HIST_CTL_B)
-
-/* Backlight control */
-#define BLC_PWM_CTL2	_MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61250) /* 965+ only */
-#define   BLM_PWM_ENABLE		(1 << 31)
-#define   BLM_COMBINATION_MODE		(1 << 30) /* gen4 only */
-#define   BLM_PIPE_SELECT		(1 << 29)
-#define   BLM_PIPE_SELECT_IVB		(3 << 29)
-#define   BLM_PIPE_A			(0 << 29)
-#define   BLM_PIPE_B			(1 << 29)
-#define   BLM_PIPE_C			(2 << 29) /* ivb + */
-#define   BLM_TRANSCODER_A		BLM_PIPE_A /* hsw */
-#define   BLM_TRANSCODER_B		BLM_PIPE_B
-#define   BLM_TRANSCODER_C		BLM_PIPE_C
-#define   BLM_TRANSCODER_EDP		(3 << 29)
-#define   BLM_PIPE(pipe)		((pipe) << 29)
-#define   BLM_POLARITY_I965		(1 << 28) /* gen4 only */
-#define   BLM_PHASE_IN_INTERUPT_STATUS	(1 << 26)
-#define   BLM_PHASE_IN_ENABLE		(1 << 25)
-#define   BLM_PHASE_IN_INTERUPT_ENABL	(1 << 24)
-#define   BLM_PHASE_IN_TIME_BASE_SHIFT	(16)
-#define   BLM_PHASE_IN_TIME_BASE_MASK	(0xff << 16)
-#define   BLM_PHASE_IN_COUNT_SHIFT	(8)
-#define   BLM_PHASE_IN_COUNT_MASK	(0xff << 8)
-#define   BLM_PHASE_IN_INCR_SHIFT	(0)
-#define   BLM_PHASE_IN_INCR_MASK	(0xff << 0)
-#define BLC_PWM_CTL	_MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61254)
-/*
- * This is the most significant 15 bits of the number of backlight cycles in a
- * complete cycle of the modulated backlight control.
- *
- * The actual value is this field multiplied by two.
- */
-#define   BACKLIGHT_MODULATION_FREQ_SHIFT	(17)
-#define   BACKLIGHT_MODULATION_FREQ_MASK	(0x7fff << 17)
-#define   BLM_LEGACY_MODE			(1 << 16) /* gen2 only */
-/*
- * This is the number of cycles out of the backlight modulation cycle for which
- * the backlight is on.
- *
- * This field must be no greater than the number of cycles in the complete
- * backlight modulation cycle.
- */
-#define   BACKLIGHT_DUTY_CYCLE_SHIFT		(0)
-#define   BACKLIGHT_DUTY_CYCLE_MASK		(0xffff)
-#define   BACKLIGHT_DUTY_CYCLE_MASK_PNV		(0xfffe)
-#define   BLM_POLARITY_PNV			(1 << 0) /* pnv only */
-
-#define BLC_HIST_CTL	_MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61260)
-#define  BLM_HISTOGRAM_ENABLE			(1 << 31)
-
-/* New registers for PCH-split platforms. Safe where new bits show up, the
- * register layout machtes with gen4 BLC_PWM_CTL[12]. */
-#define BLC_PWM_CPU_CTL2	_MMIO(0x48250)
-#define BLC_PWM_CPU_CTL		_MMIO(0x48254)
-
-#define HSW_BLC_PWM2_CTL	_MMIO(0x48350)
-
-/* PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is
- * like the normal CTL from gen4 and earlier. Hooray for confusing naming. */
-#define BLC_PWM_PCH_CTL1	_MMIO(0xc8250)
-#define   BLM_PCH_PWM_ENABLE			(1 << 31)
-#define   BLM_PCH_OVERRIDE_ENABLE		(1 << 30)
-#define   BLM_PCH_POLARITY			(1 << 29)
-#define BLC_PWM_PCH_CTL2	_MMIO(0xc8254)
-
-#define UTIL_PIN_CTL			_MMIO(0x48400)
-#define   UTIL_PIN_ENABLE		(1 << 31)
-#define   UTIL_PIN_PIPE_MASK		(3 << 29)
-#define   UTIL_PIN_PIPE(x)		((x) << 29)
-#define   UTIL_PIN_MODE_MASK		(0xf << 24)
-#define   UTIL_PIN_MODE_DATA		(0 << 24)
-#define   UTIL_PIN_MODE_PWM		(1 << 24)
-#define   UTIL_PIN_MODE_VBLANK		(4 << 24)
-#define   UTIL_PIN_MODE_VSYNC		(5 << 24)
-#define   UTIL_PIN_MODE_EYE_LEVEL	(8 << 24)
-#define   UTIL_PIN_OUTPUT_DATA		(1 << 23)
-#define   UTIL_PIN_POLARITY		(1 << 22)
-#define   UTIL_PIN_DIRECTION_INPUT	(1 << 19)
-#define   UTIL_PIN_INPUT_DATA		(1 << 16)
-
-/* BXT backlight register definition. */
-#define _BXT_BLC_PWM_CTL1			0xC8250
-#define   BXT_BLC_PWM_ENABLE			(1 << 31)
-#define   BXT_BLC_PWM_POLARITY			(1 << 29)
-#define _BXT_BLC_PWM_FREQ1			0xC8254
-#define _BXT_BLC_PWM_DUTY1			0xC8258
-
-#define _BXT_BLC_PWM_CTL2			0xC8350
-#define _BXT_BLC_PWM_FREQ2			0xC8354
-#define _BXT_BLC_PWM_DUTY2			0xC8358
-
-#define BXT_BLC_PWM_CTL(controller)    _MMIO_PIPE(controller,		\
-					_BXT_BLC_PWM_CTL1, _BXT_BLC_PWM_CTL2)
-#define BXT_BLC_PWM_FREQ(controller)   _MMIO_PIPE(controller, \
-					_BXT_BLC_PWM_FREQ1, _BXT_BLC_PWM_FREQ2)
-#define BXT_BLC_PWM_DUTY(controller)   _MMIO_PIPE(controller, \
-					_BXT_BLC_PWM_DUTY1, _BXT_BLC_PWM_DUTY2)
-
 #define PCH_GTC_CTL		_MMIO(0xe7000)
 #define   PCH_GTC_ENABLE	(1 << 31)