drm/i915/lvds: Fixup commentary

Remove the kerneldoc markup applied to non-kerneldoc comments and
convert the multiline comments to the canonical style.

drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'encoder' not described in 'intel_enable_lvds'
drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'pipe_config' not described in 'intel_enable_lvds'
drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'conn_state' not described in 'intel_enable_lvds'
drivers/gpu/drm/i915/intel_lvds.c:453: warning: Function parameter or member 'connector' not described in 'intel_lvds_detect'
drivers/gpu/drm/i915/intel_lvds.c:453: warning: Function parameter or member 'force' not described in 'intel_lvds_detect'
drivers/gpu/drm/i915/intel_lvds.c:471: warning: Function parameter or member 'connector' not described in 'intel_lvds_get_modes'
drivers/gpu/drm/i915/intel_lvds.c:932: warning: Function parameter or member 'dev_priv' not described in 'intel_lvds_init'
drivers/gpu/drm/i915/intel_lvds.c:932: warning: Excess function parameter 'dev' description in 'intel_lvds_init'

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214092909.27040-4-chris@chris-wilson.co.uk

1 files changed, 27 insertions, 15 deletions

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 4677ac0b10d7..d35d2d50f595 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -268,7 +268,9 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder,
 	/* set the corresponsding LVDS_BORDER bit */
 	temp &= ~LVDS_BORDER_ENABLE;
 	temp |= pipe_config->gmch_pfit.lvds_border_bits;
-	/* Set the B0-B3 data pairs corresponding to whether we're going to
+
+	/*
+	 * Set the B0-B3 data pairs corresponding to whether we're going to
 	 * set the DPLLs for dual-channel mode or not.
 	 */
 	if (lvds_encoder->is_dual_link)
@@ -276,7 +278,8 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder,
 	else
 		temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
 
-	/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+	/*
+	 * It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
 	 * appropriately here, but we need to look more thoroughly into how
 	 * panels behave in the two modes. For now, let's just maintain the
 	 * value we got from the BIOS.
@@ -284,12 +287,16 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder,
 	temp &= ~LVDS_A3_POWER_MASK;
 	temp |= lvds_encoder->a3_power;
 
-	/* Set the dithering flag on LVDS as needed, note that there is no
+	/*
+	 * Set the dithering flag on LVDS as needed, note that there is no
 	 * special lvds dither control bit on pch-split platforms, dithering is
-	 * only controlled through the PIPECONF reg. */
+	 * only controlled through the PIPECONF reg.
+	 */
 	if (IS_GEN4(dev_priv)) {
-		/* Bspec wording suggests that LVDS port dithering only exists
-		 * for 18bpp panels. */
+		/*
+		 * Bspec wording suggests that LVDS port dithering only exists
+		 * for 18bpp panels.
+		 */
 		if (pipe_config->dither && pipe_config->pipe_bpp == 18)
 			temp |= LVDS_ENABLE_DITHER;
 		else
@@ -304,7 +311,7 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder,
 	I915_WRITE(lvds_encoder->reg, temp);
 }
 
-/**
+/*
  * Sets the power state for the panel.
  */
 static void intel_enable_lvds(struct intel_encoder *encoder,
@@ -441,7 +448,7 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
 	return true;
 }
 
-/**
+/*
  * Detect the LVDS connection.
  *
  * Since LVDS doesn't have hotlug, we use the lid as a proxy.  Open means
@@ -464,7 +471,7 @@ intel_lvds_detect(struct drm_connector *connector, bool force)
 	return connector_status_connected;
 }
 
-/**
+/*
  * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
  */
 static int intel_lvds_get_modes(struct drm_connector *connector)
@@ -893,7 +900,8 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
 	if (dmi_check_system(intel_dual_link_lvds))
 		return true;
 
-	/* BIOS should set the proper LVDS register value at boot, but
+	/*
+	 * BIOS should set the proper LVDS register value at boot, but
 	 * in reality, it doesn't set the value when the lid is closed;
 	 * we need to check "the value to be set" in VBT when LVDS
 	 * register is uninitialized.
@@ -907,13 +915,17 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
 
 static bool intel_lvds_supported(struct drm_i915_private *dev_priv)
 {
-	/* With the introduction of the PCH we gained a dedicated
-	 * LVDS presence pin, use it. */
+	/*
+	 * With the introduction of the PCH we gained a dedicated
+	 * LVDS presence pin, use it.
+	 */
 	if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv))
 		return true;
 
-	/* Otherwise LVDS was only attached to mobile products,
-	 * except for the inglorious 830gm */
+	/*
+	 * Otherwise LVDS was only attached to mobile products,
+	 * except for the inglorious 830gm
+	 */
 	if (INTEL_GEN(dev_priv) <= 4 &&
 	    IS_MOBILE(dev_priv) && !IS_I830(dev_priv))
 		return true;
@@ -923,7 +935,7 @@ static bool intel_lvds_supported(struct drm_i915_private *dev_priv)
 
 /**
  * intel_lvds_init - setup LVDS connectors on this device
- * @dev: drm device
+ * @dev_priv: i915 device
  *
  * Create the connector, register the LVDS DDC bus, and try to figure out what
  * modes we can display on the LVDS panel (if present).