Merge tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Highlights:

   - New driver for logicvc - which is a display IP core.

   - EDID parser rework to add new extensions

   - fbcon scrolling improvements

   - i915 has some more DG2 work but not enabled by default, but should
     have enough features for userspace to work now.

  Otherwise it's lots of work all over the place. Detailed summary:

  New driver:
   - logicvc

  vfio:
   - use aperture API

  core:
   - of: Add data-lane helpers and convert drivers
   - connector: Remove deprecated ida_simple_get()

  media:
   - Add various RGB666 and RGB888 format constants

  panel:
   - Add HannStar HSD101PWW
   - Add ETML0700Y5DHA

  dma-buf:
   - add sync-file API
   - set dma mask for udmabuf devices

  fbcon:
   - Improve scrolling performance
   - Sanitize input

  fbdev:
   - device unregistering fixes
   - vesa: Support COMPILE_TEST
   - Disable firmware-device registration when first native driver loads

  aperture:
   - fix segfault during hot-unplug
   - export for use with other subsystems

  client:
   - use driver validated modes

  dp:
   - aux: make probing more reliable
   - mst: Read extended DPCD capabilities during system resume
   - Support waiting for HDP signal
   - Port-validation fixes

  edid:
   - CEA data-block iterators
   - struct drm_edid introduction
   - implement HF-EEODB extension

  gem:
   - don't use fb format non-existing planes

  probe-helper:
   - use 640x480 as displayport fallback

  scheduler:
   - don't kill jobs in interrupt context

  bridge:
   - Add support for i.MX8qxp and i.MX8qm
   - lots of fixes/cleanups
   - Add TI-DLPC3433
   - fy07024di26a30d: Optional GPIO reset
   - ldb: Add reg and reg-name properties to bindings, Kconfig fixes
   - lt9611: Fix display sensing;
   - tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
   - tc358775: Fix clock settings
   - ti-sn65dsi83: Allow GPIO to sleep
   - adv7511: I2C fixes
   - anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
   - fsl-ldb: Drop DE flip
   - ti-sn65dsi86: Convert to atomic modesetting

  amdgpu:
   - use atomic fence helpers in DM
   - fix VRAM address calculations
   - export CRTC bpc via debugfs
   - Initial devcoredump support
   - Enable high priority gfx queue on asics which support it
   - Adjust GART size on newer APUs for S/G display
   - Soft reset for GFX 11 / SDMA 6
   - Add gfxoff status query for vangogh
   - Fix timestamps for cursor only commits
   - Adjust GART size on newer APUs for S/G display
   - fix buddy memory corruption

  amdkfd:
   - MMU notifier fixes
   - P2P DMA support using dma-buf
   - Add available memory IOCTL
   - HMM profiler support
   - Simplify GPUVM validation
   - Unified memory for CWSR save/restore area

  i915:
   - General driver clean-up
   - DG2 enabling (still under force probe)
       - DG2 small BAR memory support
       - HuC loading support
       - DG2 workarounds
       - DG2/ATS-M device IDs added
   - Ponte Vecchio prep work and new blitter engines
   - add Meteorlake support
   - Fix sparse warnings
   - DMC MMIO range checks
   - Audio related fixes
   - Runtime PM fixes
   - PSR fixes
   - Media freq factor and per-gt enhancements
   - DSI fixes for ICL+
   - Disable DMC flip queue handlers
   - ADL_P voltage swing updates
   - Use more the VBT for panel information
   - Fix on Type-C ports with TBT mode
   - Improve fastset and allow seamless M/N changes
   - Accept more fixed modes with VRR/DMRRS panels
   - Disable connector polling for a headless SKU
   - ADL-S display PLL w/a
   - Enable THP on Icelake and beyond
   - Fix i915_gem_object_ggtt_pin_ww regression on old platforms
   - Expose per tile media freq factor in sysfs
   - Fix dma_resv fence handling in multi-batch execbuf
   - Improve on suspend / resume time with VT-d enabled
   - export CRTC bpc settings via debugfs

  msm:
   - gpu: a619 support
   - gpu: Fix for unclocked GMU register access
   - gpu: Devcore dump enhancements
   - client utilization via fdinfo support
   - fix fence rollover issue
   - gem: Lockdep false-positive warning fix
   - gem: Switch to pfn mappings
   - WB support on sc7180
   - dp: dropped custom bulk clock implementation
   - fix link retraining on resolution change
   - hdmi: dropped obsolete GPIO support

  tegra:
   - context isolation for host1x engines
   - tegra234 soc support

  mediatek:
   - add vdosys0/1 for mt8195
   - add MT8195 dp_intf driver

  exynos:
   - Fix resume function issue of exynos decon driver by calling
     clk_disable_unprepare() properly if clk_prepare_enable() failed.

  nouveau:
   - set of misc fixes/cleanups
   - display cleanups

  gma500:
   - Cleanup connector I2C handling

  hyperv:
   - Unify VRAM allocation of Gen1 and Gen2

  meson:
   - Support YUV422 output; Refcount fixes

  mgag200:
   - Support damage clipping
   - Support gamma handling
   - Protect concurrent HW access
   - Fixes to connector
   - Store model-specific limits in device-info structure
   - fix PCI register init

  panfrost:
   - Valhall support

  r128:
   - Fix bit-shift overflow

  rockchip:
   - Locking fixes in error path

  ssd130x:
   - Fix built-in linkage

  udl:
   - Always advertize VGA connector

  ast:
   - Support multiple outputs
   - fix black screen on resume

  sun4i:
   - HDMI PHY cleanups

  vc4:
   - Add support for BCM2711

  vkms:
   - Allocate output buffer with vmalloc()

  mcde:
   - Fix ref-count leak

  mxsfb/lcdif:
   - Support i.MX8MP LCD controller

  stm/ltdc:
   - Support dynamic Z order
   - Support mirroring

  ingenic:
   - Fix display at maximum resolution"

* tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits)
  drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code
  drm/amdgpu: enable support for psp 13.0.4 block
  drm/amdgpu: add files for PSP 13.0.4
  drm/amdgpu: add header files for MP 13.0.4
  drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index
  drm/amdgpu: send msg to IMU for the front-door loading
  drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b"
  drm/amdgpu: fix hive reference leak when reflecting psp topology info
  drm/amd/pm: enable GFX ULV feature support for SMU13.0.0
  drm/amd/pm: update driver if header for SMU 13.0.0
  drm/amdgpu: move mes self test after drm sched re-started
  drm/amdgpu: drop non-necessary call trace dump
  drm/amdgpu: enable VCN cg and JPEG cg/pg
  drm/amdgpu: vcn_4_0_2 video codec query
  drm/amdgpu: add VCN_4_0_2 firmware support
  drm/amdgpu: add VCN function in NBIO v7.7
  drm/amdgpu: fix a vcn4 boot poll bug in emulation mode
  drm/amd/amdgpu: add memory training support for PSP_V13
  drm/amdkfd: remove an unnecessary amdgpu_bo_ref
  drm/amd/pm: Add get_gfx_off_status interface for yellow carp
  ...

19 files changed, 578 insertions, 69 deletions

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 38799effd00a..a9043eacce97 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -115,6 +115,17 @@ config DRM_PANEL_EDP
 	  that it can be automatically turned off when the panel goes into a
 	  low power state.
 
+config DRM_PANEL_EBBG_FT8719
+	tristate "EBBG FT8719 panel driver"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the EBBG FT8719
+	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
+	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
+	  interface to the host.
+
 config DRM_PANEL_ELIDA_KD35T133
 	tristate "Elida KD35T133 panel driver"
 	depends on OF
@@ -438,6 +449,8 @@ config DRM_PANEL_SAMSUNG_ATNA33XC20
 	depends on OF
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on PM
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
 	select DRM_DP_AUX_BUS
 	help
 	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 42a7ab54234b..34e717382dbb 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
 obj-$(CONFIG_DRM_PANEL_EDP) += panel-edp.o
+obj-$(CONFIG_DRM_PANEL_EBBG_FT8719) += panel-ebbg-ft8719.o
 obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o
 obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o
 obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
diff --git a/drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c b/drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c
index 44674ebedf59..174ff434bd71 100644
--- a/drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c
+++ b/drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c
@@ -215,14 +215,9 @@ static const struct drm_panel_funcs tm5p5_nt35596_panel_funcs = {
 static int tm5p5_nt35596_bl_update_status(struct backlight_device *bl)
 {
 	struct mipi_dsi_device *dsi = bl_get_data(bl);
-	u16 brightness = bl->props.brightness;
+	u16 brightness = backlight_get_brightness(bl);
 	int ret;
 
-	if (bl->props.power != FB_BLANK_UNBLANK ||
-	    bl->props.fb_blank != FB_BLANK_UNBLANK ||
-	    bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
-		brightness = 0;
-
 	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
 
 	ret = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index 1be150ac758f..07f722f33fc5 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -1511,16 +1511,28 @@ static int boe_panel_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = boe->desc->size.width_mm;
 	connector->display_info.height_mm = boe->desc->size.height_mm;
 	connector->display_info.bpc = boe->desc->bpc;
+	/*
+	 * TODO: Remove once all drm drivers call
+	 * drm_connector_set_orientation_from_panel()
+	 */
 	drm_connector_set_panel_orientation(connector, boe->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation boe_panel_get_orientation(struct drm_panel *panel)
+{
+	struct boe_panel *boe = to_boe_panel(panel);
+
+	return boe->orientation;
+}
+
 static const struct drm_panel_funcs boe_panel_funcs = {
 	.unprepare = boe_panel_unprepare,
 	.prepare = boe_panel_prepare,
 	.enable = boe_panel_enable,
 	.get_modes = boe_panel_get_modes,
+	.get_orientation = boe_panel_get_orientation,
 };
 
 static int boe_panel_add(struct boe_panel *boe)
diff --git a/drivers/gpu/drm/panel/panel-dsi-cm.c b/drivers/gpu/drm/panel/panel-dsi-cm.c
index b58cb064975f..b0213a518f9d 100644
--- a/drivers/gpu/drm/panel/panel-dsi-cm.c
+++ b/drivers/gpu/drm/panel/panel-dsi-cm.c
@@ -85,17 +85,10 @@ static void dsicm_bl_power(struct panel_drv_data *ddata, bool enable)
 	else
 		return;
 
-	if (enable) {
-		backlight->props.fb_blank = FB_BLANK_UNBLANK;
-		backlight->props.state = ~(BL_CORE_FBBLANK | BL_CORE_SUSPENDED);
-		backlight->props.power = FB_BLANK_UNBLANK;
-	} else {
-		backlight->props.fb_blank = FB_BLANK_NORMAL;
-		backlight->props.power = FB_BLANK_POWERDOWN;
-		backlight->props.state |= BL_CORE_FBBLANK | BL_CORE_SUSPENDED;
-	}
-
-	backlight_update_status(backlight);
+	if (enable)
+		backlight_enable(backlight);
+	else
+		backlight_disable(backlight);
 }
 
 static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
@@ -196,13 +189,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
 	int r = 0;
-	int level;
-
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-			dev->props.power == FB_BLANK_UNBLANK)
-		level = dev->props.brightness;
-	else
-		level = 0;
+	int level = backlight_get_brightness(dev);
 
 	dev_dbg(&ddata->dsi->dev, "update brightness to %d\n", level);
 
@@ -219,11 +206,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev)
 
 static int dsicm_bl_get_intensity(struct backlight_device *dev)
 {
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-			dev->props.power == FB_BLANK_UNBLANK)
-		return dev->props.brightness;
-
-	return 0;
+	return backlight_get_brightness(dev);
 }
 
 static const struct backlight_ops dsicm_bl_ops = {
diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
new file mode 100644
index 000000000000..386f8321b930
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022 Joel Selvaraj <jo@jsfamily.in>
+ * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+static const char * const regulator_names[] = {
+	"vddio",
+	"vddpos",
+	"vddneg",
+};
+
+static const unsigned long regulator_enable_loads[] = {
+	62000,
+	100000,
+	100000
+};
+
+struct ebbg_ft8719 {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+
+	struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)];
+
+	struct gpio_desc *reset_gpio;
+};
+
+static inline
+struct ebbg_ft8719 *to_ebbg_ft8719(struct drm_panel *panel)
+{
+	return container_of(panel, struct ebbg_ft8719, panel);
+}
+
+static void ebbg_ft8719_reset(struct ebbg_ft8719 *ctx)
+{
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(4000, 5000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(1000, 2000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(15000, 16000);
+}
+
+static int ebbg_ft8719_on(struct ebbg_ft8719 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x00ff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display brightness: %d\n", ret);
+		return ret;
+	}
+
+	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24);
+	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(90);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display on: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ebbg_ft8719_off(struct ebbg_ft8719 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display off: %d\n", ret);
+		return ret;
+	}
+	usleep_range(10000, 11000);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(90);
+
+	return 0;
+}
+
+static int ebbg_ft8719_prepare(struct drm_panel *panel)
+{
+	struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret < 0)
+		return ret;
+
+	ebbg_ft8719_reset(ctx);
+
+	ret = ebbg_ft8719_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ebbg_ft8719_unprepare(struct drm_panel *panel)
+{
+	struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = ebbg_ft8719_off(ctx);
+	if (ret < 0)
+		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret)
+		dev_err(panel->dev, "Failed to disable regulators: %d\n", ret);
+
+	return 0;
+}
+
+static const struct drm_display_mode ebbg_ft8719_mode = {
+	.clock = (1080 + 28 + 4 + 16) * (2246 + 120 + 4 + 12) * 60 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 28,
+	.hsync_end = 1080 + 28 + 4,
+	.htotal = 1080 + 28 + 4 + 16,
+	.vdisplay = 2246,
+	.vsync_start = 2246 + 120,
+	.vsync_end = 2246 + 120 + 4,
+	.vtotal = 2246 + 120 + 4 + 12,
+	.width_mm = 68,
+	.height_mm = 141,
+};
+
+static int ebbg_ft8719_get_modes(struct drm_panel *panel,
+				     struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &ebbg_ft8719_mode);
+	if (!mode)
+		return -ENOMEM;
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs ebbg_ft8719_panel_funcs = {
+	.prepare = ebbg_ft8719_prepare,
+	.unprepare = ebbg_ft8719_unprepare,
+	.get_modes = ebbg_ft8719_get_modes,
+};
+
+static int ebbg_ft8719_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct ebbg_ft8719 *ctx;
+	int i, ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++)
+		ctx->supplies[i].supply = regulator_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+				      ctx->supplies);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
+		ret = regulator_set_load(ctx->supplies[i].consumer,
+						regulator_enable_loads[i]);
+		if (ret)
+			return dev_err_probe(dev, ret,
+						 "Failed to set regulator load\n");
+	}
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+	drm_panel_init(&ctx->panel, dev, &ebbg_ft8719_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ebbg_ft8719_remove(struct mipi_dsi_device *dsi)
+{
+	struct ebbg_ft8719 *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+
+	return 0;
+}
+
+static const struct of_device_id ebbg_ft8719_of_match[] = {
+	{ .compatible = "ebbg,ft8719" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ebbg_ft8719_of_match);
+
+static struct mipi_dsi_driver ebbg_ft8719_driver = {
+	.probe = ebbg_ft8719_probe,
+	.remove = ebbg_ft8719_remove,
+	.driver = {
+		.name = "panel-ebbg-ft8719",
+		.of_match_table = ebbg_ft8719_of_match,
+	},
+};
+module_mipi_dsi_driver(ebbg_ft8719_driver);
+
+MODULE_AUTHOR("Joel Selvaraj <jo@jsfamily.in>");
+MODULE_DESCRIPTION("DRM driver for EBBG FT8719 video dsi panel");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index a189982601a4..cdb154c8b866 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -39,6 +39,7 @@
 #include <drm/display/drm_dp_helper.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_device.h>
+#include <drm/drm_edid.h>
 #include <drm/drm_panel.h>
 
 /**
@@ -417,6 +418,11 @@ static int panel_edp_get_hpd_gpio(struct device *dev, struct panel_edp *p)
 	return 0;
 }
 
+static bool panel_edp_can_read_hpd(struct panel_edp *p)
+{
+	return !p->no_hpd && (p->hpd_gpio || (p->aux && p->aux->wait_hpd_asserted));
+}
+
 static int panel_edp_prepare_once(struct panel_edp *p)
 {
 	struct device *dev = p->base.dev;
@@ -441,17 +447,21 @@ static int panel_edp_prepare_once(struct panel_edp *p)
 	if (delay)
 		msleep(delay);
 
-	if (p->hpd_gpio) {
+	if (panel_edp_can_read_hpd(p)) {
 		if (p->desc->delay.hpd_absent)
 			hpd_wait_us = p->desc->delay.hpd_absent * 1000UL;
 		else
 			hpd_wait_us = 2000000;
 
-		err = readx_poll_timeout(gpiod_get_value_cansleep, p->hpd_gpio,
-					 hpd_asserted, hpd_asserted,
-					 1000, hpd_wait_us);
-		if (hpd_asserted < 0)
-			err = hpd_asserted;
+		if (p->hpd_gpio) {
+			err = readx_poll_timeout(gpiod_get_value_cansleep,
+						 p->hpd_gpio, hpd_asserted,
+						 hpd_asserted, 1000, hpd_wait_us);
+			if (hpd_asserted < 0)
+				err = hpd_asserted;
+		} else {
+			err = p->aux->wait_hpd_asserted(p->aux, hpd_wait_us);
+		}
 
 		if (err) {
 			if (err != -ETIMEDOUT)
@@ -532,18 +542,22 @@ static int panel_edp_enable(struct drm_panel *panel)
 	/*
 	 * If there is a "prepare_to_enable" delay then that's supposed to be
 	 * the delay from HPD going high until we can turn the backlight on.
-	 * However, we can only count this if HPD is handled by the panel
-	 * driver, not if it goes to a dedicated pin on the controller.
+	 * However, we can only count this if HPD is readable by the panel
+	 * driver.
+	 *
 	 * If we aren't handling the HPD pin ourselves then the best we
 	 * can do is assume that HPD went high immediately before we were
-	 * called (and link training took zero time).
+	 * called (and link training took zero time). Note that "no-hpd"
+	 * actually counts as handling HPD ourselves since we're doing the
+	 * worst case delay (in prepare) ourselves.
 	 *
 	 * NOTE: if we ever end up in this "if" statement then we're
 	 * guaranteed that the panel_edp_wait() call below will do no delay.
 	 * It already handles that case, though, so we don't need any special
 	 * code for it.
 	 */
-	if (p->desc->delay.prepare_to_enable && !p->hpd_gpio && !p->no_hpd)
+	if (p->desc->delay.prepare_to_enable &&
+	    !panel_edp_can_read_hpd(p) && !p->no_hpd)
 		delay = max(delay, p->desc->delay.prepare_to_enable);
 
 	if (delay)
@@ -586,7 +600,10 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 	else if (!num)
 		dev_warn(p->base.dev, "No display modes\n");
 
-	/* set up connector's "panel orientation" property */
+	/*
+	 * TODO: Remove once all drm drivers call
+	 * drm_connector_set_orientation_from_panel()
+	 */
 	drm_connector_set_panel_orientation(connector, p->orientation);
 
 	return num;
@@ -609,6 +626,13 @@ static int panel_edp_get_timings(struct drm_panel *panel,
 	return p->desc->num_timings;
 }
 
+static enum drm_panel_orientation panel_edp_get_orientation(struct drm_panel *panel)
+{
+	struct panel_edp *p = to_panel_edp(panel);
+
+	return p->orientation;
+}
+
 static int detected_panel_show(struct seq_file *s, void *data)
 {
 	struct drm_panel *panel = s->private;
@@ -637,6 +661,7 @@ static const struct drm_panel_funcs panel_edp_funcs = {
 	.prepare = panel_edp_prepare,
 	.enable = panel_edp_enable,
 	.get_modes = panel_edp_get_modes,
+	.get_orientation = panel_edp_get_orientation,
 	.get_timings = panel_edp_get_timings,
 	.debugfs_init = panel_edp_debugfs_init,
 };
@@ -1860,6 +1885,7 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('K', 'D', 'B', 0x0624, &kingdisplay_kd116n21_30nv_a010.delay, "116N21-30NV-A010"),
 	EDP_PANEL_ENTRY('K', 'D', 'B', 0x1120, &delay_200_500_e80_d50, "116N29-30NK-C007"),
 
+	EDP_PANEL_ENTRY('S', 'H', 'P', 0x1511, &delay_200_500_e50, "LQ140M1JW48"),
 	EDP_PANEL_ENTRY('S', 'H', 'P', 0x1523, &sharp_lq140m1jw46.delay, "LQ140M1JW46"),
 	EDP_PANEL_ENTRY('S', 'H', 'P', 0x154c, &delay_200_500_p2e100, "LQ116M1JW10"),
 
diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c
index 80227617a4d6..01dd555a7f26 100644
--- a/drivers/gpu/drm/panel/panel-elida-kd35t133.c
+++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c
@@ -217,15 +217,27 @@ static int kd35t133_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = mode->width_mm;
 	connector->display_info.height_mm = mode->height_mm;
 	drm_mode_probed_add(connector, mode);
+	/*
+	 * TODO: Remove once all drm drivers call
+	 * drm_connector_set_orientation_from_panel()
+	 */
 	drm_connector_set_panel_orientation(connector, ctx->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation kd35t133_get_orientation(struct drm_panel *panel)
+{
+	struct kd35t133 *ctx = panel_to_kd35t133(panel);
+
+	return ctx->orientation;
+}
+
 static const struct drm_panel_funcs kd35t133_funcs = {
 	.unprepare	= kd35t133_unprepare,
 	.prepare	= kd35t133_prepare,
 	.get_modes	= kd35t133_get_modes,
+	.get_orientation = kd35t133_get_orientation,
 };
 
 static int kd35t133_probe(struct mipi_dsi_device *dsi)
diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
index a9cd7135cb51..ee61d60eceae 100644
--- a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
+++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
@@ -209,7 +209,7 @@ static int feiyang_dsi_probe(struct mipi_dsi_device *dsi)
 		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->avdd),
 				     "Couldn't get avdd regulator\n");
 
-	ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
+	ctx->reset = devm_gpiod_get_optional(&dsi->dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(ctx->reset))
 		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->reset),
 				     "Couldn't get our reset GPIO\n");
diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
index ba30d11547ad..596861269774 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
@@ -853,17 +853,29 @@ static int ili9881c_get_modes(struct drm_panel *panel,
 	connector->display_info.width_mm = mode->width_mm;
 	connector->display_info.height_mm = mode->height_mm;
 
+	/*
+	 * TODO: Remove once all drm drivers call
+	 * drm_connector_set_orientation_from_panel()
+	 */
 	drm_connector_set_panel_orientation(connector, ctx->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation ili9881c_get_orientation(struct drm_panel *panel)
+{
+	struct ili9881c *ctx = panel_to_ili9881c(panel);
+
+	return ctx->orientation;
+}
+
 static const struct drm_panel_funcs ili9881c_funcs = {
 	.prepare	= ili9881c_prepare,
 	.unprepare	= ili9881c_unprepare,
 	.enable		= ili9881c_enable,
 	.disable	= ili9881c_disable,
 	.get_modes	= ili9881c_get_modes,
+	.get_orientation = ili9881c_get_orientation,
 };
 
 static int ili9881c_dsi_probe(struct mipi_dsi_device *dsi)
diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
index f11252fb00fe..de8758c30e6e 100644
--- a/drivers/gpu/drm/panel/panel-lvds.c
+++ b/drivers/gpu/drm/panel/panel-lvds.c
@@ -99,15 +99,28 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
 	drm_display_info_set_bus_formats(&connector->display_info,
 					 &lvds->bus_format, 1);
 	connector->display_info.bus_flags = lvds->bus_flags;
+
+	/*
+	 * TODO: Remove once all drm drivers call
+	 * drm_connector_set_orientation_from_panel()
+	 */
 	drm_connector_set_panel_orientation(connector, lvds->orientation);
 
 	return 1;
 }
 
+static enum drm_panel_orientation panel_lvds_get_orientation(struct drm_panel *panel)
+{
+	struct panel_lvds *lvds = to_panel_lvds(panel);
+
+	return lvds->orientation;
+}
+
 static const struct drm_panel_funcs panel_lvds_funcs = {
 	.unprepare = panel_lvds_unprepare,
 	.prepare = panel_lvds_prepare,
 	.get_modes = panel_lvds_get_modes,
+	.get_orientation = panel_lvds_get_orientation,
 };
 
 static int panel_lvds_parse_dt(struct panel_lvds *lvds)
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt35510.c b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
index 873cbd38e6d3..40ea41b0a5dd 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt35510.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
@@ -190,7 +190,7 @@ struct nt35510_config {
 	 * 6 = Hsync x 2
 	 * 7 = Hsync x 4
 	 * bits 4..6 in the upper nibble controls BTP, the boosting
-	 * amplification for the the step-up circuit:
+	 * amplification for the step-up circuit:
 	 * 0 = Disable
 	 * 1 = 1.5 x VDDB
 	 * 2 = 1.66 x VDDB
@@ -211,7 +211,7 @@ struct nt35510_config {
 	 * bits 0..2 in the lower nibble controls NCK, the booster clock
 	 * frequency, the values are the same as for PCK in @bt1ctr.
 	 * bits 4..5 in the upper nibble controls BTN, the boosting
-	 * amplification for the the step-up circuit.
+	 * amplification for the step-up circuit.
 	 * 0 = Disable
 	 * 1 = -1.5 x VDDB
 	 * 2 = -2 x VDDB
@@ -250,7 +250,7 @@ struct nt35510_config {
 	 * bits 0..2 in the lower nibble controls LCK, the booster clock
 	 * frequency, the values are the same as for PCK in @bt1ctr.
 	 * bits 4..5 in the upper nibble controls BTL, the boosting
-	 * amplification for the the step-up circuit.
+	 * amplification for the step-up circuit.
 	 * 0 = AVEE + VCL
 	 * 1 = AVEE - AVDD
 	 * 2 = AVEE + VCL - AVDD
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
index 231f371901e8..6d6ce42787e2 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
@@ -628,6 +628,10 @@ static int nt36672a_panel_add(struct nt36672a_panel *pinfo)
 
 	drm_panel_init(&pinfo->base, dev, &panel_funcs, DRM_MODE_CONNECTOR_DSI);
 
+	ret = drm_panel_of_backlight(&pinfo->base);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
 	drm_panel_add(&pinfo->base);
 
 	return 0;
diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
index 145047e19394..a6dc5ab182fa 100644
--- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
+++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
@@ -45,6 +45,7 @@
 #include <linux/err.h>
 #include <linux/fb.h>
 #include <linux/i2c.h>
+#include <linux/media-bus-format.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
diff --git a/drivers/gpu/drm/panel/panel-raydium-rm67191.c b/drivers/gpu/drm/panel/panel-raydium-rm67191.c
index 572547d1aa83..4e021a572211 100644
--- a/drivers/gpu/drm/panel/panel-raydium-rm67191.c
+++ b/drivers/gpu/drm/panel/panel-raydium-rm67191.c
@@ -8,6 +8,7 @@
 #include <linux/backlight.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
+#include <linux/media-bus-format.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/regulator/consumer.h>
diff --git a/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c b/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c
index 3dd10412d147..5a8b978c6415 100644
--- a/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c
+++ b/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c
@@ -19,6 +19,10 @@
 #include <drm/drm_edid.h>
 #include <drm/drm_panel.h>
 
+/* T3 VCC to HPD high is max 200 ms */
+#define HPD_MAX_MS	200
+#define HPD_MAX_US	(HPD_MAX_MS * 1000)
+
 struct atana33xc20_panel {
 	struct drm_panel base;
 	bool prepared;
@@ -30,6 +34,7 @@ struct atana33xc20_panel {
 
 	struct regulator *supply;
 	struct gpio_desc *el_on3_gpio;
+	struct drm_dp_aux *aux;
 
 	struct edid *edid;
 
@@ -79,7 +84,7 @@ static int atana33xc20_suspend(struct device *dev)
 static int atana33xc20_resume(struct device *dev)
 {
 	struct atana33xc20_panel *p = dev_get_drvdata(dev);
-	bool hpd_asserted = false;
+	int hpd_asserted;
 	int ret;
 
 	/* T12 (Power off time) is min 500 ms */
@@ -90,23 +95,41 @@ static int atana33xc20_resume(struct device *dev)
 		return ret;
 	p->powered_on_time = ktime_get();
 
-	/*
-	 * Handle HPD. Note: if HPD is hooked up to a dedicated pin on the
-	 * eDP controller then "no_hpd" will be false _and_ "hpd_gpio" will be
-	 * NULL. It's up to the controller driver to wait for HPD after
-	 * preparing the panel in that case.
-	 */
 	if (p->no_hpd) {
-		/* T3 VCC to HPD high is max 200 ms */
-		msleep(200);
-	} else if (p->hpd_gpio) {
+		msleep(HPD_MAX_MS);
+		return 0;
+	}
+
+	if (p->hpd_gpio) {
 		ret = readx_poll_timeout(gpiod_get_value_cansleep, p->hpd_gpio,
 					 hpd_asserted, hpd_asserted,
-					 1000, 200000);
-		if (!hpd_asserted)
-			dev_warn(dev, "Timeout waiting for HPD\n");
+					 1000, HPD_MAX_US);
+		if (hpd_asserted < 0)
+			ret = hpd_asserted;
+
+		if (ret)
+			dev_warn(dev, "Error waiting for HPD GPIO: %d\n", ret);
+
+		return ret;
 	}
 
+	if (p->aux->wait_hpd_asserted) {
+		ret = p->aux->wait_hpd_asserted(p->aux, HPD_MAX_US);
+
+		if (ret)
+			dev_warn(dev, "Controller error waiting for HPD: %d\n", ret);
+
+		return ret;
+	}
+
+	/*
+	 * Note that it's possible that no_hpd is false, hpd_gpio is
+	 * NULL, and wait_hpd_asserted is NULL. This is because
+	 * wait_hpd_asserted() is optional even if HPD is hooked up to
+	 * a dedicated pin on the eDP controller. In this case we just
+	 * assume that the controller driver will wait for HPD at the
+	 * right times.
+	 */
 	return 0;
 }
 
@@ -263,6 +286,8 @@ static int atana33xc20_probe(struct dp_aux_ep_device *aux_ep)
 		return -ENOMEM;
 	dev_set_drvdata(dev, panel);
 
+	panel->aux = aux_ep->aux;
+
 	panel->supply = devm_regulator_get(dev, "power");
 	if (IS_ERR(panel->supply))
 		return dev_err_probe(dev, PTR_ERR(panel->supply),
diff --git a/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c b/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c
index 3939b25e6666..76160e5d43bd 100644
--- a/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c
+++ b/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/media-bus-format.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 4a2e580a2f7b..ff5e1a44c43a 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -23,6 +23,8 @@
 
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/media-bus-format.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
@@ -35,6 +37,7 @@
 
 #include <drm/drm_crtc.h>
 #include <drm/drm_device.h>
+#include <drm/drm_edid.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_panel.h>
 
@@ -411,7 +414,10 @@ static int panel_simple_get_modes(struct drm_panel *panel,
 	/* add hard-coded panel modes */
 	num += panel_simple_get_non_edid_modes(p, connector);
 
-	/* set up connector's "panel orientation" property */
+	/*
+	 * TODO: Remove once all drm drivers call
+	 * drm_connector_set_orientation_from_panel()
+	 */
 	drm_connector_set_panel_orientation(connector, p->orientation);
 
 	return num;
@@ -434,12 +440,20 @@ static int panel_simple_get_timings(struct drm_panel *panel,
 	return p->desc->num_timings;
 }
 
+static enum drm_panel_orientation panel_simple_get_orientation(struct drm_panel *panel)
+{
+	struct panel_simple *p = to_panel_simple(panel);
+
+	return p->orientation;
+}
+
 static const struct drm_panel_funcs panel_simple_funcs = {
 	.disable = panel_simple_disable,
 	.unprepare = panel_simple_unprepare,
 	.prepare = panel_simple_prepare,
 	.enable = panel_simple_enable,
 	.get_modes = panel_simple_get_modes,
+	.get_orientation = panel_simple_get_orientation,
 	.get_timings = panel_simple_get_timings,
 };
 
@@ -663,8 +677,10 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
 	drm_panel_init(&panel->base, dev, &panel_simple_funcs, connector_type);
 
 	err = drm_panel_of_backlight(&panel->base);
-	if (err)
+	if (err) {
+		dev_err_probe(dev, err, "Could not find backlight\n");
 		goto disable_pm_runtime;
+	}
 
 	drm_panel_add(&panel->base);
 
@@ -778,6 +794,36 @@ static const struct panel_desc ampire_am800480r3tmqwa1h = {
 	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
 };
 
+static const struct display_timing ampire_am800600p5tmqw_tb8h_timing = {
+	.pixelclock = { 34500000, 39600000, 50400000 },
+	.hactive = { 800, 800, 800 },
+	.hfront_porch = { 12, 112, 312 },
+	.hback_porch = { 87, 87, 48 },
+	.hsync_len = { 1, 1, 40 },
+	.vactive = { 600, 600, 600 },
+	.vfront_porch = { 1, 21, 61 },
+	.vback_porch = { 38, 38, 19 },
+	.vsync_len = { 1, 1, 20 },
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE |
+		DISPLAY_FLAGS_SYNC_POSEDGE,
+};
+
+static const struct panel_desc ampire_am800600p5tmqwtb8h = {
+	.timings = &ampire_am800600p5tmqw_tb8h_timing,
+	.num_timings = 1,
+	.bpc = 6,
+	.size = {
+		.width = 162,
+		.height = 122,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH |
+		DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
+		DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
 static const struct display_timing santek_st0700i5y_rbslw_f_timing = {
 	.pixelclock = { 26400000, 33300000, 46800000 },
 	.hactive = { 800, 800, 800 },
@@ -1427,6 +1473,30 @@ static const struct panel_desc dataimage_fg040346dsswbg04 = {
 	.connector_type = DRM_MODE_CONNECTOR_DPI,
 };
 
+static const struct display_timing dataimage_fg1001l0dsswmg01_timing = {
+	.pixelclock = { 68900000, 71110000, 73400000 },
+	.hactive = { 1280, 1280, 1280 },
+	.vactive = { 800, 800, 800 },
+	.hback_porch = { 100, 100, 100 },
+	.hfront_porch = { 100, 100, 100 },
+	.vback_porch = { 5, 5, 5 },
+	.vfront_porch = { 5, 5, 5 },
+	.hsync_len = { 24, 24, 24 },
+	.vsync_len = { 3, 3, 3 },
+	.flags = DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE |
+		 DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
+};
+
+static const struct panel_desc dataimage_fg1001l0dsswmg01 = {
+	.timings = &dataimage_fg1001l0dsswmg01_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 217,
+		.height = 136,
+	},
+};
+
 static const struct drm_display_mode dataimage_scf0700c48ggu18_mode = {
 	.clock = 33260,
 	.hdisplay = 800,
@@ -1685,6 +1755,32 @@ static const struct panel_desc edt_etm0700g0bdh6 = {
 	.connector_type = DRM_MODE_CONNECTOR_DPI,
 };
 
+static const struct display_timing edt_etml0700y5dha_timing = {
+	.pixelclock = { 40800000, 51200000, 67200000 },
+	.hactive = { 1024, 1024, 1024 },
+	.hfront_porch = { 30, 106, 125 },
+	.hback_porch = { 30, 106, 125 },
+	.hsync_len = { 30, 108, 126 },
+	.vactive = { 600, 600, 600 },
+	.vfront_porch = { 3, 12, 67},
+	.vback_porch = { 3, 12, 67 },
+	.vsync_len = { 4, 11, 66 },
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		 DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc edt_etml0700y5dha = {
+	.timings = &edt_etml0700y5dha_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 155,
+		.height = 86,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
 static const struct drm_display_mode edt_etmv570g2dhu_mode = {
 	.clock = 25175,
 	.hdisplay = 640,
@@ -1953,6 +2049,31 @@ static const struct panel_desc hannstar_hsd100pxn1 = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
+static const struct display_timing hannstar_hsd101pww2_timing = {
+	.pixelclock = { 64300000, 71100000, 82000000 },
+	.hactive = { 1280, 1280, 1280 },
+	.hfront_porch = { 1, 1, 10 },
+	.hback_porch = { 1, 1, 10 },
+	.hsync_len = { 58, 158, 661 },
+	.vactive = { 800, 800, 800 },
+	.vfront_porch = { 1, 1, 10 },
+	.vback_porch = { 1, 1, 10 },
+	.vsync_len = { 1, 21, 203 },
+	.flags = DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc hannstar_hsd101pww2 = {
+	.timings = &hannstar_hsd101pww2_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 217,
+		.height = 136,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
 static const struct drm_display_mode hitachi_tx23d38vm0caa_mode = {
 	.clock = 33333,
 	.hdisplay = 800,
@@ -3755,6 +3876,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "ampire,am800480r3tmqwa1h",
 		.data = &ampire_am800480r3tmqwa1h,
 	}, {
+		.compatible = "ampire,am800600p5tmqw-tb8h",
+		.data = &ampire_am800600p5tmqwtb8h,
+	}, {
 		.compatible = "arm,rtsm-display",
 		.data = &arm_rtsm,
 	}, {
@@ -3833,6 +3957,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "dataimage,fg040346dsswbg04",
 		.data = &dataimage_fg040346dsswbg04,
 	}, {
+		.compatible = "dataimage,fg1001l0dsswmg01",
+		.data = &dataimage_fg1001l0dsswmg01,
+	}, {
 		.compatible = "dataimage,scf0700c48ggu18",
 		.data = &dataimage_scf0700c48ggu18,
 	}, {
@@ -3869,6 +3996,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "edt,etm0700g0edh6",
 		.data = &edt_etm0700g0bdh6,
 	}, {
+		.compatible = "edt,etml0700y5dha",
+		.data = &edt_etml0700y5dha,
+	}, {
 		.compatible = "edt,etmv570g2dhu",
 		.data = &edt_etmv570g2dhu,
 	}, {
@@ -3899,6 +4029,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "hannstar,hsd100pxn1",
 		.data = &hannstar_hsd100pxn1,
 	}, {
+		.compatible = "hannstar,hsd101pww2",
+		.data = &hannstar_hsd101pww2,
+	}, {
 		.compatible = "hit,tx23d38vm0caa",
 		.data = &hitachi_tx23d38vm0caa
 	}, {
diff --git a/drivers/gpu/drm/panel/panel-sony-acx565akm.c b/drivers/gpu/drm/panel/panel-sony-acx565akm.c
index 0d7541a33f87..3d6a286056a0 100644
--- a/drivers/gpu/drm/panel/panel-sony-acx565akm.c
+++ b/drivers/gpu/drm/panel/panel-sony-acx565akm.c
@@ -298,13 +298,7 @@ static void acx565akm_set_brightness(struct acx565akm_panel *lcd, int level)
 static int acx565akm_bl_update_status_locked(struct backlight_device *dev)
 {
 	struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev);
-	int level;
-
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-	    dev->props.power == FB_BLANK_UNBLANK)
-		level = dev->props.brightness;
-	else
-		level = 0;
+	int level = backlight_get_brightness(dev);
 
 	acx565akm_set_brightness(lcd, level);
 
@@ -330,8 +324,7 @@ static int acx565akm_bl_get_intensity(struct backlight_device *dev)
 
 	mutex_lock(&lcd->mutex);
 
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-	    dev->props.power == FB_BLANK_UNBLANK)
+	if (!backlight_is_blank(dev))
 		intensity = acx565akm_get_actual_brightness(lcd);
 	else
 		intensity = 0;
@@ -349,7 +342,6 @@ static const struct backlight_ops acx565akm_bl_ops = {
 static int acx565akm_backlight_init(struct acx565akm_panel *lcd)
 {
 	struct backlight_properties props = {
-		.fb_blank = FB_BLANK_UNBLANK,
 		.power = FB_BLANK_UNBLANK,
 		.type = BACKLIGHT_RAW,
 	};