Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "Highlights:

   - AMD KFD driver merge

     This is the AMD HSA interface for exposing a lowlevel interface for
     GPGPU use.  They have an open source userspace built on top of this
     interface, and the code looks as good as it was going to get out of
     tree.

   - Initial atomic modesetting work

     The need for an atomic modesetting interface to allow userspace to
     try and send a complete set of modesetting state to the driver has
     arisen, and been suffering from neglect this past year.  No more,
     the start of the common code and changes for msm driver to use it
     are in this tree.  Ongoing work to get the userspace ioctl finished
     and the code clean will probably wait until next kernel.

   - DisplayID 1.3 and tiled monitor exposed to userspace.

     Tiled monitor property is now exposed for userspace to make use of.

   - Rockchip drm driver merged.

   - imx gpu driver moved out of staging

  Other stuff:

   - core:
        panel - MIPI DSI + new panels.
        expose suggested x/y properties for virtual GPUs

   - i915:
        Initial Skylake (SKL) support
        gen3/4 reset work
        start of dri1/ums removal
        infoframe tracking
        fixes for lots of things.

   - nouveau:
        tegra k1 voltage support
        GM204 modesetting support
        GT21x memory reclocking work

   - radeon:
        CI dpm fixes
        GPUVM improvements
        Initial DPM fan control

   - rcar-du:
        HDMI support added
        removed some support for old boards
        slave encoder driver for Analog Devices adv7511

   - exynos:
        Exynos4415 SoC support

   - msm:
        a4xx gpu support
        atomic helper conversion

   - tegra:
        iommu support
        universal plane support
        ganged-mode DSI support

   - sti:
        HDMI i2c improvements

   - vmwgfx:
        some late fixes.

   - qxl:
        use suggested x/y properties"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits)
  drm: sti: fix module compilation issue
  drm/i915: save/restore GMBUS freq across suspend/resume on gen4
  drm: sti: correctly cleanup CRTC and planes
  drm: sti: add HQVDP plane
  drm: sti: add cursor plane
  drm: sti: enable auxiliary CRTC
  drm: sti: fix delay in VTG programming
  drm: sti: prepare sti_tvout to support auxiliary crtc
  drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
  drm: sti: fix hdmi avi infoframe
  drm: sti: remove event lock while disabling vblank
  drm: sti: simplify gdp code
  drm: sti: clear all mixer control
  drm: sti: remove gpio for HDMI hot plug detection
  drm: sti: allow to change hdmi ddc i2c adapter
  drm/doc: Document drm_add_modes_noedid() usage
  drm/i915: Remove '& 0xffff' from the mask given to WA_REG()
  drm/i915: Invert the mask and val arguments in wa_add() and WA_REG()
  drm: Zero out DRM object memory upon cleanup
  drm/i915/bdw: Fix the write setting up the WIZ hashing mode
  ...

1 files changed, 90 insertions, 3 deletions

diff --git a/drivers/gpu/drm/radeon/cikd.h b/drivers/gpu/drm/radeon/cikd.h
index 0c6e1b55d968..ba85986febea 100644
--- a/drivers/gpu/drm/radeon/cikd.h
+++ b/drivers/gpu/drm/radeon/cikd.h
@@ -30,6 +30,8 @@
 #define CIK_RB_BITMAP_WIDTH_PER_SH     2
 #define HAWAII_RB_BITMAP_WIDTH_PER_SH  4
 
+#define RADEON_NUM_OF_VMIDS	8
+
 /* DIDT IND registers */
 #define DIDT_SQ_CTRL0                                     0x0
 #       define DIDT_CTRL_EN                               (1 << 0)
@@ -184,7 +186,10 @@
 #define		DIG_THERM_DPM(x)			((x) << 14)
 #define		DIG_THERM_DPM_MASK			0x003FC000
 #define		DIG_THERM_DPM_SHIFT			14
-
+#define	CG_THERMAL_STATUS				0xC0300008
+#define		FDO_PWM_DUTY(x)				((x) << 9)
+#define		FDO_PWM_DUTY_MASK			(0xff << 9)
+#define		FDO_PWM_DUTY_SHIFT			9
 #define	CG_THERMAL_INT					0xC030000C
 #define		CI_DIG_THERM_INTH(x)			((x) << 8)
 #define		CI_DIG_THERM_INTH_MASK			0x0000FF00
@@ -194,7 +199,10 @@
 #define		CI_DIG_THERM_INTL_SHIFT			16
 #define 	THERM_INT_MASK_HIGH			(1 << 24)
 #define 	THERM_INT_MASK_LOW			(1 << 25)
-
+#define	CG_MULT_THERMAL_CTRL				0xC0300010
+#define		TEMP_SEL(x)				((x) << 20)
+#define		TEMP_SEL_MASK				(0xff << 20)
+#define		TEMP_SEL_SHIFT				20
 #define	CG_MULT_THERMAL_STATUS				0xC0300014
 #define		ASIC_MAX_TEMP(x)			((x) << 0)
 #define		ASIC_MAX_TEMP_MASK			0x000001ff
@@ -203,6 +211,36 @@
 #define		CTF_TEMP_MASK				0x0003fe00
 #define		CTF_TEMP_SHIFT				9
 
+#define	CG_FDO_CTRL0					0xC0300064
+#define		FDO_STATIC_DUTY(x)			((x) << 0)
+#define		FDO_STATIC_DUTY_MASK			0x000000FF
+#define		FDO_STATIC_DUTY_SHIFT			0
+#define	CG_FDO_CTRL1					0xC0300068
+#define		FMAX_DUTY100(x)				((x) << 0)
+#define		FMAX_DUTY100_MASK			0x000000FF
+#define		FMAX_DUTY100_SHIFT			0
+#define	CG_FDO_CTRL2					0xC030006C
+#define		TMIN(x)					((x) << 0)
+#define		TMIN_MASK				0x000000FF
+#define		TMIN_SHIFT				0
+#define		FDO_PWM_MODE(x)				((x) << 11)
+#define		FDO_PWM_MODE_MASK			(7 << 11)
+#define		FDO_PWM_MODE_SHIFT			11
+#define		TACH_PWM_RESP_RATE(x)			((x) << 25)
+#define		TACH_PWM_RESP_RATE_MASK			(0x7f << 25)
+#define		TACH_PWM_RESP_RATE_SHIFT		25
+#define CG_TACH_CTRL                                    0xC0300070
+#       define EDGE_PER_REV(x)                          ((x) << 0)
+#       define EDGE_PER_REV_MASK                        (0x7 << 0)
+#       define EDGE_PER_REV_SHIFT                       0
+#       define TARGET_PERIOD(x)                         ((x) << 3)
+#       define TARGET_PERIOD_MASK                       0xfffffff8
+#       define TARGET_PERIOD_SHIFT                      3
+#define CG_TACH_STATUS                                  0xC0300074
+#       define TACH_PERIOD(x)                           ((x) << 0)
+#       define TACH_PERIOD_MASK                         0xffffffff
+#       define TACH_PERIOD_SHIFT                        0
+
 #define CG_ECLK_CNTL                                    0xC05000AC
 #       define ECLK_DIVIDER_MASK                        0x7f
 #       define ECLK_DIR_CNTL_EN                         (1 << 8)
@@ -1137,6 +1175,9 @@
 #define			SH_MEM_ALIGNMENT_MODE_UNALIGNED			3
 #define		DEFAULT_MTYPE(x)				((x) << 4)
 #define		APE1_MTYPE(x)					((x) << 7)
+/* valid for both DEFAULT_MTYPE and APE1_MTYPE */
+#define	MTYPE_CACHED					0
+#define	MTYPE_NONCACHED					3
 
 #define	SX_DEBUG_1					0x9060
 
@@ -1447,6 +1488,16 @@
 #define CP_HQD_ACTIVE                                     0xC91C
 #define CP_HQD_VMID                                       0xC920
 
+#define CP_HQD_PERSISTENT_STATE				0xC924u
+#define	DEFAULT_CP_HQD_PERSISTENT_STATE			(0x33U << 8)
+
+#define CP_HQD_PIPE_PRIORITY				0xC928u
+#define CP_HQD_QUEUE_PRIORITY				0xC92Cu
+#define CP_HQD_QUANTUM					0xC930u
+#define	QUANTUM_EN					1U
+#define	QUANTUM_SCALE_1MS				(1U << 4)
+#define	QUANTUM_DURATION(x)				((x) << 8)
+
 #define CP_HQD_PQ_BASE                                    0xC934
 #define CP_HQD_PQ_BASE_HI                                 0xC938
 #define CP_HQD_PQ_RPTR                                    0xC93C
@@ -1474,12 +1525,32 @@
 #define		PRIV_STATE      			(1 << 30)
 #define		KMD_QUEUE      				(1 << 31)
 
-#define CP_HQD_DEQUEUE_REQUEST                          0xC974
+#define CP_HQD_IB_BASE_ADDR				0xC95Cu
+#define CP_HQD_IB_BASE_ADDR_HI			0xC960u
+#define CP_HQD_IB_RPTR					0xC964u
+#define CP_HQD_IB_CONTROL				0xC968u
+#define	IB_ATC_EN					(1U << 23)
+#define	DEFAULT_MIN_IB_AVAIL_SIZE			(3U << 20)
+
+#define CP_HQD_DEQUEUE_REQUEST			0xC974
+#define	DEQUEUE_REQUEST_DRAIN				1
+#define DEQUEUE_REQUEST_RESET				2
 
 #define CP_MQD_CONTROL                                  0xC99C
 #define		MQD_VMID(x)				((x) << 0)
 #define		MQD_VMID_MASK      			(0xf << 0)
 
+#define CP_HQD_SEMA_CMD					0xC97Cu
+#define CP_HQD_MSG_TYPE					0xC980u
+#define CP_HQD_ATOMIC0_PREOP_LO			0xC984u
+#define CP_HQD_ATOMIC0_PREOP_HI			0xC988u
+#define CP_HQD_ATOMIC1_PREOP_LO			0xC98Cu
+#define CP_HQD_ATOMIC1_PREOP_HI			0xC990u
+#define CP_HQD_HQ_SCHEDULER0			0xC994u
+#define CP_HQD_HQ_SCHEDULER1			0xC998u
+
+#define SH_STATIC_MEM_CONFIG			0x9604u
+
 #define DB_RENDER_CONTROL                               0x28000
 
 #define PA_SC_RASTER_CONFIG                             0x28350
@@ -2069,4 +2140,20 @@
 #define VCE_CMD_IB_AUTO		0x00000005
 #define VCE_CMD_SEMAPHORE	0x00000006
 
+#define ATC_VMID0_PASID_MAPPING					0x339Cu
+#define	ATC_VMID_PASID_MAPPING_UPDATE_STATUS	0x3398u
+#define	ATC_VMID_PASID_MAPPING_VALID				(1U << 31)
+
+#define ATC_VM_APERTURE0_CNTL					0x3310u
+#define	ATS_ACCESS_MODE_NEVER						0
+#define	ATS_ACCESS_MODE_ALWAYS						1
+
+#define ATC_VM_APERTURE0_CNTL2					0x3318u
+#define ATC_VM_APERTURE0_HIGH_ADDR				0x3308u
+#define ATC_VM_APERTURE0_LOW_ADDR				0x3300u
+#define ATC_VM_APERTURE1_CNTL					0x3314u
+#define ATC_VM_APERTURE1_CNTL2					0x331Cu
+#define ATC_VM_APERTURE1_HIGH_ADDR				0x330Cu
+#define ATC_VM_APERTURE1_LOW_ADDR				0x3304u
+
 #endif