media: gpu: host1x: mipi: Keep MIPI clock enabled and mutex locked till calibration done

With the split of MIPI calibration into tegra_mipi_calibrate() and
tegra_mipi_wait(), MIPI clock is not kept enabled and mutex is not locked
till the calibration is done.

So, this patch keeps MIPI clock enabled and mutex locked after triggering
start of calibration till its done.

To let calibration process go through its finite sequence codes before
calibration logic waiting for pads idle state added wait time of 75usec
to make sure it sees idle state to apply the results.

This patch renames tegra_mipi_calibrate() as tegra_mipi_start_calibration()
and tegra_mipi_wait() as tegra_mipi_finish_calibration() to be inline
with their usage.

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

1 files changed, 10 insertions, 12 deletions

diff --git a/drivers/gpu/host1x/mipi.c b/drivers/gpu/host1x/mipi.c
index e606464aa43c..2efe12dde8bc 100644
--- a/drivers/gpu/host1x/mipi.c
+++ b/drivers/gpu/host1x/mipi.c
@@ -293,19 +293,13 @@ int tegra_mipi_disable(struct tegra_mipi_device *dev)
 }
 EXPORT_SYMBOL(tegra_mipi_disable);
 
-int tegra_mipi_wait(struct tegra_mipi_device *device)
+int tegra_mipi_finish_calibration(struct tegra_mipi_device *device)
 {
 	struct tegra_mipi *mipi = device->mipi;
 	void __iomem *status_reg = mipi->regs + (MIPI_CAL_STATUS << 2);
 	u32 value;
 	int err;
 
-	err = clk_enable(device->mipi->clk);
-	if (err < 0)
-		return err;
-
-	mutex_lock(&device->mipi->lock);
-
 	err = readl_relaxed_poll_timeout(status_reg, value,
 					 !(value & MIPI_CAL_STATUS_ACTIVE) &&
 					 (value & MIPI_CAL_STATUS_DONE), 50,
@@ -315,9 +309,9 @@ int tegra_mipi_wait(struct tegra_mipi_device *device)
 
 	return err;
 }
-EXPORT_SYMBOL(tegra_mipi_wait);
+EXPORT_SYMBOL(tegra_mipi_finish_calibration);
 
-int tegra_mipi_calibrate(struct tegra_mipi_device *device)
+int tegra_mipi_start_calibration(struct tegra_mipi_device *device)
 {
 	const struct tegra_mipi_soc *soc = device->mipi->soc;
 	unsigned int i;
@@ -381,12 +375,16 @@ int tegra_mipi_calibrate(struct tegra_mipi_device *device)
 	value |= MIPI_CAL_CTRL_START;
 	tegra_mipi_writel(device->mipi, value, MIPI_CAL_CTRL);
 
-	mutex_unlock(&device->mipi->lock);
-	clk_disable(device->mipi->clk);
+	/*
+	 * Wait for min 72uS to let calibration logic finish calibration
+	 * sequence codes before waiting for pads idle state to apply the
+	 * results.
+	 */
+	usleep_range(75, 80);
 
 	return 0;
 }
-EXPORT_SYMBOL(tegra_mipi_calibrate);
+EXPORT_SYMBOL(tegra_mipi_start_calibration);
 
 static const struct tegra_mipi_pad tegra114_mipi_pads[] = {
 	{ .data = MIPI_CAL_CONFIG_CSIA },