hwmon (pmbus) use simple i2c probe function

pmbus_do_probe doesn't use the id information provided in its second
argument, so this can be removed, which then allows using the
single-parameter i2c probe function ("probe_new") for probes.

This avoids scanning the identifier tables during probes.

Drivers which didn't use the id are converted as-is; drivers which did
are modified as follows:

* if the information in i2c_client is sufficient, that's used instead
  (client->name);
* configured v. probed comparisons are performed by comparing the
  configured name to the detected name, instead of the ids; this
  involves strcmp but is still cheaper than comparing all the device
  names when scanning the tables;
* anything else is handled by calling i2c_match_id() with the same
  level of error-handling (if any) as before.

Additionally, the mismatch message in the ltc2978 driver is adjusted
so that it no longer assumes that the driver_data is an index into
ltc2978_id.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20200808210004.30880-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 6 insertions, 5 deletions

diff --git a/drivers/hwmon/pmbus/bel-pfe.c b/drivers/hwmon/pmbus/bel-pfe.c
index f236e18f45a5..2c5b853d6c7f 100644
--- a/drivers/hwmon/pmbus/bel-pfe.c
+++ b/drivers/hwmon/pmbus/bel-pfe.c
@@ -87,12 +87,13 @@ static struct pmbus_driver_info pfe_driver_info[] = {
 	},
 };
 
-static int pfe_pmbus_probe(struct i2c_client *client,
-			   const struct i2c_device_id *id)
+static const struct i2c_device_id pfe_device_id[];
+
+static int pfe_pmbus_probe(struct i2c_client *client)
 {
 	int model;
 
-	model = (int)id->driver_data;
+	model = (int)i2c_match_id(pfe_device_id, client)->driver_data;
 
 	/*
 	 * PFE3000-12-069RA devices may not stay in page 0 during device
@@ -104,7 +105,7 @@ static int pfe_pmbus_probe(struct i2c_client *client,
 		i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
 	}
 
-	return pmbus_do_probe(client, id, &pfe_driver_info[model]);
+	return pmbus_do_probe(client, &pfe_driver_info[model]);
 }
 
 static const struct i2c_device_id pfe_device_id[] = {
@@ -119,7 +120,7 @@ static struct i2c_driver pfe_pmbus_driver = {
 	.driver = {
 		   .name = "bel-pfe",
 	},
-	.probe = pfe_pmbus_probe,
+	.probe_new = pfe_pmbus_probe,
 	.remove = pmbus_do_remove,
 	.id_table = pfe_device_id,
 };