coresight: etm4x: Cleanup TRCCONFIGR register accesses

This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.

Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-7-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

1 files changed, 23 insertions, 23 deletions

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
index 21687cc1e4e2..53f84da3fe44 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
@@ -180,12 +180,12 @@ static ssize_t reset_store(struct device *dev,
 
 	/* Disable data tracing: do not trace load and store data transfers */
 	config->mode &= ~(ETM_MODE_LOAD | ETM_MODE_STORE);
-	config->cfg &= ~(BIT(1) | BIT(2));
+	config->cfg &= ~(TRCCONFIGR_INSTP0_LOAD | TRCCONFIGR_INSTP0_STORE);
 
 	/* Disable data value and data address tracing */
 	config->mode &= ~(ETM_MODE_DATA_TRACE_ADDR |
 			   ETM_MODE_DATA_TRACE_VAL);
-	config->cfg &= ~(BIT(16) | BIT(17));
+	config->cfg &= ~(TRCCONFIGR_DA | TRCCONFIGR_DV);
 
 	/* Disable all events tracing */
 	config->eventctrl0 = 0x0;
@@ -304,82 +304,82 @@ static ssize_t mode_store(struct device *dev,
 
 	if (drvdata->instrp0 == true) {
 		/* start by clearing instruction P0 field */
-		config->cfg  &= ~(BIT(1) | BIT(2));
+		config->cfg  &= ~TRCCONFIGR_INSTP0_LOAD_STORE;
 		if (config->mode & ETM_MODE_LOAD)
 			/* 0b01 Trace load instructions as P0 instructions */
-			config->cfg  |= BIT(1);
+			config->cfg  |= TRCCONFIGR_INSTP0_LOAD;
 		if (config->mode & ETM_MODE_STORE)
 			/* 0b10 Trace store instructions as P0 instructions */
-			config->cfg  |= BIT(2);
+			config->cfg  |= TRCCONFIGR_INSTP0_STORE;
 		if (config->mode & ETM_MODE_LOAD_STORE)
 			/*
 			 * 0b11 Trace load and store instructions
 			 * as P0 instructions
 			 */
-			config->cfg  |= BIT(1) | BIT(2);
+			config->cfg  |= TRCCONFIGR_INSTP0_LOAD_STORE;
 	}
 
 	/* bit[3], Branch broadcast mode */
 	if ((config->mode & ETM_MODE_BB) && (drvdata->trcbb == true))
-		config->cfg |= BIT(3);
+		config->cfg |= TRCCONFIGR_BB;
 	else
-		config->cfg &= ~BIT(3);
+		config->cfg &= ~TRCCONFIGR_BB;
 
 	/* bit[4], Cycle counting instruction trace bit */
 	if ((config->mode & ETMv4_MODE_CYCACC) &&
 		(drvdata->trccci == true))
-		config->cfg |= BIT(4);
+		config->cfg |= TRCCONFIGR_CCI;
 	else
-		config->cfg &= ~BIT(4);
+		config->cfg &= ~TRCCONFIGR_CCI;
 
 	/* bit[6], Context ID tracing bit */
 	if ((config->mode & ETMv4_MODE_CTXID) && (drvdata->ctxid_size))
-		config->cfg |= BIT(6);
+		config->cfg |= TRCCONFIGR_CID;
 	else
-		config->cfg &= ~BIT(6);
+		config->cfg &= ~TRCCONFIGR_CID;
 
 	if ((config->mode & ETM_MODE_VMID) && (drvdata->vmid_size))
-		config->cfg |= BIT(7);
+		config->cfg |= TRCCONFIGR_VMID;
 	else
-		config->cfg &= ~BIT(7);
+		config->cfg &= ~TRCCONFIGR_VMID;
 
 	/* bits[10:8], Conditional instruction tracing bit */
 	mode = ETM_MODE_COND(config->mode);
 	if (drvdata->trccond == true) {
-		config->cfg &= ~(BIT(8) | BIT(9) | BIT(10));
-		config->cfg |= mode << 8;
+		config->cfg &= ~TRCCONFIGR_COND_MASK;
+		config->cfg |= mode << __bf_shf(TRCCONFIGR_COND_MASK);
 	}
 
 	/* bit[11], Global timestamp tracing bit */
 	if ((config->mode & ETMv4_MODE_TIMESTAMP) && (drvdata->ts_size))
-		config->cfg |= BIT(11);
+		config->cfg |= TRCCONFIGR_TS;
 	else
-		config->cfg &= ~BIT(11);
+		config->cfg &= ~TRCCONFIGR_TS;
 
 	/* bit[12], Return stack enable bit */
 	if ((config->mode & ETM_MODE_RETURNSTACK) &&
 					(drvdata->retstack == true))
-		config->cfg |= BIT(12);
+		config->cfg |= TRCCONFIGR_RS;
 	else
-		config->cfg &= ~BIT(12);
+		config->cfg &= ~TRCCONFIGR_RS;
 
 	/* bits[14:13], Q element enable field */
 	mode = ETM_MODE_QELEM(config->mode);
 	/* start by clearing QE bits */
-	config->cfg &= ~(BIT(13) | BIT(14));
+	config->cfg &= ~(TRCCONFIGR_QE_W_COUNTS | TRCCONFIGR_QE_WO_COUNTS);
 	/*
 	 * if supported, Q elements with instruction counts are enabled.
 	 * Always set the low bit for any requested mode. Valid combos are
 	 * 0b00, 0b01 and 0b11.
 	 */
 	if (mode && drvdata->q_support)
-		config->cfg |= BIT(13);
+		config->cfg |= TRCCONFIGR_QE_W_COUNTS;
 	/*
 	 * if supported, Q elements with and without instruction
 	 * counts are enabled
 	 */
 	if ((mode & BIT(1)) && (drvdata->q_support & BIT(1)))
-		config->cfg |= BIT(14);
+		config->cfg |= TRCCONFIGR_QE_WO_COUNTS;
 
 	/* bit[11], AMBA Trace Bus (ATB) trigger enable bit */
 	if ((config->mode & ETM_MODE_ATB_TRIGGER) &&