i2c: busses: make use of i2c_8bit_addr_from_msg

Because it looks neater.

For diolan, this allows factoring out some code that is now common
between if and else.

For eg20t, pch_i2c_writebytes is always called with a write in
msgs->flags, and pch_i2c_readbytes with a read.

For imx, i2c_imx_dma_write and i2c_imx_write are always called with a
write in msgs->flags, and i2c_imx_read with a read.

For qup, qup_i2c_write_tx_fifo_v1 is always called with a write in
qup->msg->flags.

For stu300, also restructure debug output for resends, since that
code as a result is only handling debug output.

Reviewed-by: Guenter Roeck <linux@roeck-us.net> [diolan]
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [efm32 and imx]
Acked-by: Linus Walleij <linus.walleij@linaro.org> [stu300]
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

1 files changed, 4 insertions, 7 deletions

diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c
index f718ee4e3332..3f28317cde39 100644
--- a/drivers/i2c/busses/i2c-diolan-u2c.c
+++ b/drivers/i2c/busses/i2c-diolan-u2c.c
@@ -360,11 +360,11 @@ static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
 			if (ret < 0)
 				goto abort;
 		}
+		ret = diolan_i2c_put_byte_ack(dev,
+					      i2c_8bit_addr_from_msg(pmsg));
+		if (ret < 0)
+			goto abort;
 		if (pmsg->flags & I2C_M_RD) {
-			ret =
-			    diolan_i2c_put_byte_ack(dev, (pmsg->addr << 1) | 1);
-			if (ret < 0)
-				goto abort;
 			for (j = 0; j < pmsg->len; j++) {
 				u8 byte;
 				bool ack = j < pmsg->len - 1;
@@ -393,9 +393,6 @@ static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
 				pmsg->buf[j] = byte;
 			}
 		} else {
-			ret = diolan_i2c_put_byte_ack(dev, pmsg->addr << 1);
-			if (ret < 0)
-				goto abort;
 			for (j = 0; j < pmsg->len; j++) {
 				ret = diolan_i2c_put_byte_ack(dev,
 							      pmsg->buf[j]);