i2c: Delete the broken i2c-ite bus driver

The rest of the ITE8172 support was already removed from MIPS tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 278 deletions

diff --git a/drivers/i2c/busses/i2c-ite.c b/drivers/i2c/busses/i2c-ite.c
deleted file mode 100644
index f7d71869b3b9..000000000000
--- a/drivers/i2c/busses/i2c-ite.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
-   -------------------------------------------------------------------------
-   i2c-adap-ite.c i2c-hw access for the IIC peripheral on the ITE MIPS system
-   -------------------------------------------------------------------------
-   Hai-Pao Fan, MontaVista Software, Inc.
-   hpfan@mvista.com or source@mvista.com
-
-   Copyright 2001 MontaVista Software Inc.
-
-   ----------------------------------------------------------------------------
-   This file was highly leveraged from i2c-elektor.c, which was created
-   by Simon G. Vogl and Hans Berglund:
-
- 
-     Copyright (C) 1995-97 Simon G. Vogl
-                   1998-99 Hans Berglund
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
-   Frodo Looijaard <frodol@dds.nl> */
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-ite.h>
-#include <linux/i2c-adap-ite.h>
-#include "../i2c-ite.h"
-
-#define DEFAULT_BASE  0x14014030
-#define ITE_IIC_IO_SIZE	0x40
-#define DEFAULT_IRQ   0
-#define DEFAULT_CLOCK 0x1b0e	/* default 16MHz/(27+14) = 400KHz */
-#define DEFAULT_OWN   0x55
-
-static int base;
-static int irq;
-static int clock;
-static int own;
-
-static struct iic_ite gpi;
-static wait_queue_head_t iic_wait;
-static int iic_pending;
-static spinlock_t lock;
-
-/* ----- local functions ----------------------------------------------	*/
-
-static void iic_ite_setiic(void *data, int ctl, short val)
-{
-        unsigned long j = jiffies + 10;
-
-	pr_debug(" Write 0x%02x to 0x%x\n",(unsigned short)val, ctl&0xff);
-#ifdef DEBUG
-	while (time_before(jiffies, j))
-		schedule();
-#endif
-	outw(val,ctl);
-}
-
-static short iic_ite_getiic(void *data, int ctl)
-{
-	short val;
-
-	val = inw(ctl);
-	pr_debug("Read 0x%02x from 0x%x\n",(unsigned short)val, ctl&0xff);
-	return (val);
-}
-
-/* Return our slave address.  This is the address
- * put on the I2C bus when another master on the bus wants to address us
- * as a slave
- */
-static int iic_ite_getown(void *data)
-{
-	return (gpi.iic_own);
-}
-
-
-static int iic_ite_getclock(void *data)
-{
-	return (gpi.iic_clock);
-}
-
-
-/* Put this process to sleep.  We will wake up when the
- * IIC controller interrupts.
- */
-static void iic_ite_waitforpin(void) {
-   DEFINE_WAIT(wait);
-   int timeout = 2;
-   unsigned long flags;
-
-   /* If interrupts are enabled (which they are), then put the process to
-    * sleep.  This process will be awakened by two events -- either the
-    * the IIC peripheral interrupts or the timeout expires. 
-    * If interrupts are not enabled then delay for a reasonable amount 
-    * of time and return.
-    */
-   if (gpi.iic_irq > 0) {
-	spin_lock_irqsave(&lock, flags);
-	if (iic_pending == 0) {
-		spin_unlock_irqrestore(&lock, flags);
-		prepare_to_wait(&iic_wait, &wait, TASK_INTERRUPTIBLE);
-		if (schedule_timeout(timeout*HZ)) {
-			spin_lock_irqsave(&lock, flags);
-			if (iic_pending == 1) {
-				iic_pending = 0;
-			}
-			spin_unlock_irqrestore(&lock, flags);
-		}
-		finish_wait(&iic_wait, &wait);
-	} else {
-		iic_pending = 0;
-		spin_unlock_irqrestore(&lock, flags);
-	}
-   } else {
-      udelay(100);
-   }
-}
-
-
-static irqreturn_t iic_ite_handler(int this_irq, void *dev_id)
-{
-	spin_lock(&lock);
-	iic_pending = 1;
-	spin_unlock(&lock);
-
-	wake_up_interruptible(&iic_wait);
-
-	return IRQ_HANDLED;
-}
-
-
-/* Lock the region of memory where I/O registers exist.  Request our
- * interrupt line and register its associated handler.
- */
-static int iic_hw_resrc_init(void)
-{
-	if (!request_region(gpi.iic_base, ITE_IIC_IO_SIZE, "i2c"))
-		return -ENODEV;
-  
-	if (gpi.iic_irq <= 0)
-		return 0;
-
-	if (request_irq(gpi.iic_irq, iic_ite_handler, 0, "ITE IIC", 0) < 0)
-		gpi.iic_irq = 0;
-	else
-		enable_irq(gpi.iic_irq);
-
-	return 0;
-}
-
-
-static void iic_ite_release(void)
-{
-	if (gpi.iic_irq > 0) {
-		disable_irq(gpi.iic_irq);
-		free_irq(gpi.iic_irq, 0);
-	}
-	release_region(gpi.iic_base , 2);
-}
-
-/* ------------------------------------------------------------------------
- * Encapsulate the above functions in the correct operations structure.
- * This is only done when more than one hardware adapter is supported.
- */
-static struct i2c_algo_iic_data iic_ite_data = {
-	NULL,
-	iic_ite_setiic,
-	iic_ite_getiic,
-	iic_ite_getown,
-	iic_ite_getclock,
-	iic_ite_waitforpin,
-	80, 80, 100,		/*	waits, timeout */
-};
-
-static struct i2c_adapter iic_ite_ops = {
-	.owner		= THIS_MODULE,
-	.id		= I2C_HW_I_IIC,
-	.algo_data	= &iic_ite_data,
-	.name		= "ITE IIC adapter",
-};
-
-/* Called when the module is loaded.  This function starts the
- * cascade of calls up through the hierarchy of i2c modules (i.e. up to the
- *  algorithm layer and into to the core layer)
- */
-static int __init iic_ite_init(void) 
-{
-
-	struct iic_ite *piic = &gpi;
-
-	printk(KERN_INFO "Initialize ITE IIC adapter module\n");
-	if (base == 0)
-		piic->iic_base = DEFAULT_BASE;
-	else
-		piic->iic_base = base;
-
-	if (irq == 0)
-		piic->iic_irq = DEFAULT_IRQ;
-	else
-		piic->iic_irq = irq;
-
-	if (clock == 0)
-		piic->iic_clock = DEFAULT_CLOCK;
-	else
-		piic->iic_clock = clock;
-
-	if (own == 0)
-		piic->iic_own = DEFAULT_OWN;
-	else
-		piic->iic_own = own;
-
-	iic_ite_data.data = (void *)piic;
-	init_waitqueue_head(&iic_wait);
-	spin_lock_init(&lock);
-	if (iic_hw_resrc_init() == 0) {
-		if (i2c_iic_add_bus(&iic_ite_ops) < 0)
-			return -ENODEV;
-	} else {
-		return -ENODEV;
-	}
-	printk(KERN_INFO " found device at %#x irq %d.\n", 
-		piic->iic_base, piic->iic_irq);
-	return 0;
-}
-
-
-static void iic_ite_exit(void)
-{
-	i2c_iic_del_bus(&iic_ite_ops);
-        iic_ite_release();
-}
-
-/* If modules is NOT defined when this file is compiled, then the MODULE_*
- * macros will resolve to nothing
- */
-MODULE_AUTHOR("MontaVista Software <www.mvista.com>");
-MODULE_DESCRIPTION("I2C-Bus adapter routines for ITE IIC bus adapter");
-MODULE_LICENSE("GPL");
-
-module_param(base, int, 0);
-module_param(irq, int, 0);
-module_param(clock, int, 0);
-module_param(own, int, 0);
-
-
-/* Called when module is loaded or when kernel is initialized.
- * If MODULES is defined when this file is compiled, then this function will
- * resolve to init_module (the function called when insmod is invoked for a
- * module).  Otherwise, this function is called early in the boot, when the
- * kernel is intialized.  Check out /include/init.h to see how this works.
- */
-module_init(iic_ite_init);
-
-/* Resolves to module_cleanup when MODULES is defined. */
-module_exit(iic_ite_exit);