iio:adc:imx: add Freescale Vybrid vf610 adc driver

Add Freescale Vybrid vf610 adc driver. The driver only support
ADC software trigger.

VF610 ADC device documentation is available at below reference manual
(chapter 37):
http://cache.freescale.com/files/32bit/doc/ref_manual/VYBRIDRM.pdf?
fpsp=1&WT_TYPE=Reference%20Manuals&WT_VENDOR=FREESCALE&WT_FILE_FORMAT
=pdf&WT_ASSET=Documentation

CC: Shawn Guo <shawn.guo@linaro.org>
CC: Jonathan Cameron <jic23@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Otavio Salvador <otavio@ossystems.com.br>
CC: Peter Meerwald <pmeerw@pmeerw.net>
CC: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

1 files changed, 711 insertions, 0 deletions

diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c
new file mode 100644
index 000000000000..37f542e8233c
--- /dev/null
+++ b/drivers/iio/adc/vf610_adc.c
@@ -0,0 +1,711 @@
+/*
+ * Freescale Vybrid vf610 ADC driver
+ *
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/driver.h>
+
+/* This will be the driver name the kernel reports */
+#define DRIVER_NAME "vf610-adc"
+
+/* Vybrid/IMX ADC registers */
+#define VF610_REG_ADC_HC0		0x00
+#define VF610_REG_ADC_HC1		0x04
+#define VF610_REG_ADC_HS		0x08
+#define VF610_REG_ADC_R0		0x0c
+#define VF610_REG_ADC_R1		0x10
+#define VF610_REG_ADC_CFG		0x14
+#define VF610_REG_ADC_GC		0x18
+#define VF610_REG_ADC_GS		0x1c
+#define VF610_REG_ADC_CV		0x20
+#define VF610_REG_ADC_OFS		0x24
+#define VF610_REG_ADC_CAL		0x28
+#define VF610_REG_ADC_PCTL		0x30
+
+/* Configuration register field define */
+#define VF610_ADC_MODE_BIT8		0x00
+#define VF610_ADC_MODE_BIT10		0x04
+#define VF610_ADC_MODE_BIT12		0x08
+#define VF610_ADC_MODE_MASK		0x0c
+#define VF610_ADC_BUSCLK2_SEL		0x01
+#define VF610_ADC_ALTCLK_SEL		0x02
+#define VF610_ADC_ADACK_SEL		0x03
+#define VF610_ADC_ADCCLK_MASK		0x03
+#define VF610_ADC_CLK_DIV2		0x20
+#define VF610_ADC_CLK_DIV4		0x40
+#define VF610_ADC_CLK_DIV8		0x60
+#define VF610_ADC_CLK_MASK		0x60
+#define VF610_ADC_ADLSMP_LONG		0x10
+#define VF610_ADC_ADSTS_MASK		0x300
+#define VF610_ADC_ADLPC_EN		0x80
+#define VF610_ADC_ADHSC_EN		0x400
+#define VF610_ADC_REFSEL_VALT		0x100
+#define VF610_ADC_REFSEL_VBG		0x1000
+#define VF610_ADC_ADTRG_HARD		0x2000
+#define VF610_ADC_AVGS_8		0x4000
+#define VF610_ADC_AVGS_16		0x8000
+#define VF610_ADC_AVGS_32		0xC000
+#define VF610_ADC_AVGS_MASK		0xC000
+#define VF610_ADC_OVWREN		0x10000
+
+/* General control register field define */
+#define VF610_ADC_ADACKEN		0x1
+#define VF610_ADC_DMAEN			0x2
+#define VF610_ADC_ACREN			0x4
+#define VF610_ADC_ACFGT			0x8
+#define VF610_ADC_ACFE			0x10
+#define VF610_ADC_AVGEN			0x20
+#define VF610_ADC_ADCON			0x40
+#define VF610_ADC_CAL			0x80
+
+/* Other field define */
+#define VF610_ADC_ADCHC(x)		((x) & 0xF)
+#define VF610_ADC_AIEN			(0x1 << 7)
+#define VF610_ADC_CONV_DISABLE		0x1F
+#define VF610_ADC_HS_COCO0		0x1
+#define VF610_ADC_CALF			0x2
+#define VF610_ADC_TIMEOUT		msecs_to_jiffies(100)
+
+enum clk_sel {
+	VF610_ADCIOC_BUSCLK_SET,
+	VF610_ADCIOC_ALTCLK_SET,
+	VF610_ADCIOC_ADACK_SET,
+};
+
+enum vol_ref {
+	VF610_ADCIOC_VR_VREF_SET,
+	VF610_ADCIOC_VR_VALT_SET,
+	VF610_ADCIOC_VR_VBG_SET,
+};
+
+enum average_sel {
+	VF610_ADC_SAMPLE_1,
+	VF610_ADC_SAMPLE_4,
+	VF610_ADC_SAMPLE_8,
+	VF610_ADC_SAMPLE_16,
+	VF610_ADC_SAMPLE_32,
+};
+
+struct vf610_adc_feature {
+	enum clk_sel	clk_sel;
+	enum vol_ref	vol_ref;
+
+	int	clk_div;
+	int     sample_rate;
+	int	res_mode;
+
+	bool	lpm;
+	bool	calibration;
+	bool	ovwren;
+};
+
+struct vf610_adc {
+	struct device *dev;
+	void __iomem *regs;
+	struct clk *clk;
+
+	u32 vref_uv;
+	u32 value;
+	struct regulator *vref;
+	struct vf610_adc_feature adc_feature;
+
+	struct completion completion;
+};
+
+#define VF610_ADC_CHAN(_idx, _chan_type) {			\
+	.type = (_chan_type),					\
+	.indexed = 1,						\
+	.channel = (_idx),					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
+				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
+}
+
+static const struct iio_chan_spec vf610_adc_iio_channels[] = {
+	VF610_ADC_CHAN(0, IIO_VOLTAGE),
+	VF610_ADC_CHAN(1, IIO_VOLTAGE),
+	VF610_ADC_CHAN(2, IIO_VOLTAGE),
+	VF610_ADC_CHAN(3, IIO_VOLTAGE),
+	VF610_ADC_CHAN(4, IIO_VOLTAGE),
+	VF610_ADC_CHAN(5, IIO_VOLTAGE),
+	VF610_ADC_CHAN(6, IIO_VOLTAGE),
+	VF610_ADC_CHAN(7, IIO_VOLTAGE),
+	VF610_ADC_CHAN(8, IIO_VOLTAGE),
+	VF610_ADC_CHAN(9, IIO_VOLTAGE),
+	VF610_ADC_CHAN(10, IIO_VOLTAGE),
+	VF610_ADC_CHAN(11, IIO_VOLTAGE),
+	VF610_ADC_CHAN(12, IIO_VOLTAGE),
+	VF610_ADC_CHAN(13, IIO_VOLTAGE),
+	VF610_ADC_CHAN(14, IIO_VOLTAGE),
+	VF610_ADC_CHAN(15, IIO_VOLTAGE),
+	/* sentinel */
+};
+
+/*
+ * ADC sample frequency, unit is ADCK cycles.
+ * ADC clk source is ipg clock, which is the same as bus clock.
+ *
+ * ADC conversion time = SFCAdder + AverageNum x (BCT + LSTAdder)
+ * SFCAdder: fixed to 6 ADCK cycles
+ * AverageNum: 1, 4, 8, 16, 32 samples for hardware average.
+ * BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode
+ * LSTAdder(Long Sample Time): fixed to 3 ADCK cycles
+ *
+ * By default, enable 12 bit resolution mode, clock source
+ * set to ipg clock, So get below frequency group:
+ */
+static const u32 vf610_sample_freq_avail[5] =
+{1941176, 559332, 286957, 145374, 73171};
+
+static inline void vf610_adc_cfg_init(struct vf610_adc *info)
+{
+	/* set default Configuration for ADC controller */
+	info->adc_feature.clk_sel = VF610_ADCIOC_BUSCLK_SET;
+	info->adc_feature.vol_ref = VF610_ADCIOC_VR_VREF_SET;
+
+	info->adc_feature.calibration = true;
+	info->adc_feature.ovwren = true;
+
+	info->adc_feature.clk_div = 1;
+	info->adc_feature.res_mode = 12;
+	info->adc_feature.sample_rate = 1;
+	info->adc_feature.lpm = true;
+}
+
+static void vf610_adc_cfg_post_set(struct vf610_adc *info)
+{
+	struct vf610_adc_feature *adc_feature = &info->adc_feature;
+	int cfg_data = 0;
+	int gc_data = 0;
+
+	switch (adc_feature->clk_sel) {
+	case VF610_ADCIOC_ALTCLK_SET:
+		cfg_data |= VF610_ADC_ALTCLK_SEL;
+		break;
+	case VF610_ADCIOC_ADACK_SET:
+		cfg_data |= VF610_ADC_ADACK_SEL;
+		break;
+	default:
+		break;
+	}
+
+	/* low power set for calibration */
+	cfg_data |= VF610_ADC_ADLPC_EN;
+
+	/* enable high speed for calibration */
+	cfg_data |= VF610_ADC_ADHSC_EN;
+
+	/* voltage reference */
+	switch (adc_feature->vol_ref) {
+	case VF610_ADCIOC_VR_VREF_SET:
+		break;
+	case VF610_ADCIOC_VR_VALT_SET:
+		cfg_data |= VF610_ADC_REFSEL_VALT;
+		break;
+	case VF610_ADCIOC_VR_VBG_SET:
+		cfg_data |= VF610_ADC_REFSEL_VBG;
+		break;
+	default:
+		dev_err(info->dev, "error voltage reference\n");
+	}
+
+	/* data overwrite enable */
+	if (adc_feature->ovwren)
+		cfg_data |= VF610_ADC_OVWREN;
+
+	writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
+	writel(gc_data, info->regs + VF610_REG_ADC_GC);
+}
+
+static void vf610_adc_calibration(struct vf610_adc *info)
+{
+	int adc_gc, hc_cfg;
+	int timeout;
+
+	if (!info->adc_feature.calibration)
+		return;
+
+	/* enable calibration interrupt */
+	hc_cfg = VF610_ADC_AIEN | VF610_ADC_CONV_DISABLE;
+	writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
+
+	adc_gc = readl(info->regs + VF610_REG_ADC_GC);
+	writel(adc_gc | VF610_ADC_CAL, info->regs + VF610_REG_ADC_GC);
+
+	timeout = wait_for_completion_timeout
+			(&info->completion, VF610_ADC_TIMEOUT);
+	if (timeout == 0)
+		dev_err(info->dev, "Timeout for adc calibration\n");
+
+	adc_gc = readl(info->regs + VF610_REG_ADC_GS);
+	if (adc_gc & VF610_ADC_CALF)
+		dev_err(info->dev, "ADC calibration failed\n");
+
+	info->adc_feature.calibration = false;
+}
+
+static void vf610_adc_cfg_set(struct vf610_adc *info)
+{
+	struct vf610_adc_feature *adc_feature = &(info->adc_feature);
+	int cfg_data;
+
+	cfg_data = readl(info->regs + VF610_REG_ADC_CFG);
+
+	/* low power configuration */
+	cfg_data &= ~VF610_ADC_ADLPC_EN;
+	if (adc_feature->lpm)
+		cfg_data |= VF610_ADC_ADLPC_EN;
+
+	/* disable high speed */
+	cfg_data &= ~VF610_ADC_ADHSC_EN;
+
+	writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
+}
+
+static void vf610_adc_sample_set(struct vf610_adc *info)
+{
+	struct vf610_adc_feature *adc_feature = &(info->adc_feature);
+	int cfg_data, gc_data;
+
+	cfg_data = readl(info->regs + VF610_REG_ADC_CFG);
+	gc_data = readl(info->regs + VF610_REG_ADC_GC);
+
+	/* resolution mode */
+	cfg_data &= ~VF610_ADC_MODE_MASK;
+	switch (adc_feature->res_mode) {
+	case 8:
+		cfg_data |= VF610_ADC_MODE_BIT8;
+		break;
+	case 10:
+		cfg_data |= VF610_ADC_MODE_BIT10;
+		break;
+	case 12:
+		cfg_data |= VF610_ADC_MODE_BIT12;
+		break;
+	default:
+		dev_err(info->dev, "error resolution mode\n");
+		break;
+	}
+
+	/* clock select and clock divider */
+	cfg_data &= ~(VF610_ADC_CLK_MASK | VF610_ADC_ADCCLK_MASK);
+	switch (adc_feature->clk_div) {
+	case 1:
+		break;
+	case 2:
+		cfg_data |= VF610_ADC_CLK_DIV2;
+		break;
+	case 4:
+		cfg_data |= VF610_ADC_CLK_DIV4;
+		break;
+	case 8:
+		cfg_data |= VF610_ADC_CLK_DIV8;
+		break;
+	case 16:
+		switch (adc_feature->clk_sel) {
+		case VF610_ADCIOC_BUSCLK_SET:
+			cfg_data |= VF610_ADC_BUSCLK2_SEL | VF610_ADC_CLK_DIV8;
+			break;
+		default:
+			dev_err(info->dev, "error clk divider\n");
+			break;
+		}
+		break;
+	}
+
+	/* Use the short sample mode */
+	cfg_data &= ~(VF610_ADC_ADLSMP_LONG | VF610_ADC_ADSTS_MASK);
+
+	/* update hardware average selection */
+	cfg_data &= ~VF610_ADC_AVGS_MASK;
+	gc_data &= ~VF610_ADC_AVGEN;
+	switch (adc_feature->sample_rate) {
+	case VF610_ADC_SAMPLE_1:
+		break;
+	case VF610_ADC_SAMPLE_4:
+		gc_data |= VF610_ADC_AVGEN;
+		break;
+	case VF610_ADC_SAMPLE_8:
+		gc_data |= VF610_ADC_AVGEN;
+		cfg_data |= VF610_ADC_AVGS_8;
+		break;
+	case VF610_ADC_SAMPLE_16:
+		gc_data |= VF610_ADC_AVGEN;
+		cfg_data |= VF610_ADC_AVGS_16;
+		break;
+	case VF610_ADC_SAMPLE_32:
+		gc_data |= VF610_ADC_AVGEN;
+		cfg_data |= VF610_ADC_AVGS_32;
+		break;
+	default:
+		dev_err(info->dev,
+			"error hardware sample average select\n");
+	}
+
+	writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
+	writel(gc_data, info->regs + VF610_REG_ADC_GC);
+}
+
+static void vf610_adc_hw_init(struct vf610_adc *info)
+{
+	/* CFG: Feature set */
+	vf610_adc_cfg_post_set(info);
+	vf610_adc_sample_set(info);
+
+	/* adc calibration */
+	vf610_adc_calibration(info);
+
+	/* CFG: power and speed set */
+	vf610_adc_cfg_set(info);
+}
+
+static int vf610_adc_read_data(struct vf610_adc *info)
+{
+	int result;
+
+	result = readl(info->regs + VF610_REG_ADC_R0);
+
+	switch (info->adc_feature.res_mode) {
+	case 8:
+		result &= 0xFF;
+		break;
+	case 10:
+		result &= 0x3FF;
+		break;
+	case 12:
+		result &= 0xFFF;
+		break;
+	default:
+		break;
+	}
+
+	return result;
+}
+
+static irqreturn_t vf610_adc_isr(int irq, void *dev_id)
+{
+	struct vf610_adc *info = (struct vf610_adc *)dev_id;
+	int coco;
+
+	coco = readl(info->regs + VF610_REG_ADC_HS);
+	if (coco & VF610_ADC_HS_COCO0) {
+		info->value = vf610_adc_read_data(info);
+		complete(&info->completion);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("1941176, 559332, 286957, 145374, 73171");
+
+static struct attribute *vf610_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group vf610_attribute_group = {
+	.attrs = vf610_attributes,
+};
+
+static int vf610_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val,
+			int *val2,
+			long mask)
+{
+	struct vf610_adc *info = iio_priv(indio_dev);
+	unsigned int hc_cfg;
+	unsigned long ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&indio_dev->mlock);
+		reinit_completion(&info->completion);
+
+		hc_cfg = VF610_ADC_ADCHC(chan->channel);
+		hc_cfg |= VF610_ADC_AIEN;
+		writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
+		ret = wait_for_completion_interruptible_timeout
+				(&info->completion, VF610_ADC_TIMEOUT);
+		if (ret == 0) {
+			mutex_unlock(&indio_dev->mlock);
+			return -ETIMEDOUT;
+		}
+		if (ret < 0) {
+			mutex_unlock(&indio_dev->mlock);
+			return ret;
+		}
+
+		*val = info->value;
+		mutex_unlock(&indio_dev->mlock);
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = info->vref_uv / 1000;
+		*val2 = info->adc_feature.res_mode;
+		return IIO_VAL_FRACTIONAL_LOG2;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = vf610_sample_freq_avail[info->adc_feature.sample_rate];
+		*val2 = 0;
+		return IIO_VAL_INT;
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int vf610_write_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int val,
+			int val2,
+			long mask)
+{
+	struct vf610_adc *info = iio_priv(indio_dev);
+	int i;
+
+	switch (mask) {
+		case IIO_CHAN_INFO_SAMP_FREQ:
+			for (i = 0;
+				i < ARRAY_SIZE(vf610_sample_freq_avail);
+				i++)
+				if (val == vf610_sample_freq_avail[i]) {
+					info->adc_feature.sample_rate = i;
+					vf610_adc_sample_set(info);
+					return 0;
+				}
+			break;
+
+		default:
+			break;
+	}
+
+	return -EINVAL;
+}
+
+static int vf610_adc_reg_access(struct iio_dev *indio_dev,
+			unsigned reg, unsigned writeval,
+			unsigned *readval)
+{
+	struct vf610_adc *info = iio_priv(indio_dev);
+
+	if ((readval == NULL) ||
+		(!(reg % 4) || (reg > VF610_REG_ADC_PCTL)))
+		return -EINVAL;
+
+	*readval = readl(info->regs + reg);
+
+	return 0;
+}
+
+static const struct iio_info vf610_adc_iio_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &vf610_read_raw,
+	.write_raw = &vf610_write_raw,
+	.debugfs_reg_access = &vf610_adc_reg_access,
+	.attrs = &vf610_attribute_group,
+};
+
+static const struct of_device_id vf610_adc_match[] = {
+	{ .compatible = "fsl,vf610-adc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vf610_adc_match);
+
+static int vf610_adc_probe(struct platform_device *pdev)
+{
+	struct vf610_adc *info;
+	struct iio_dev *indio_dev;
+	struct resource *mem;
+	int irq;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct vf610_adc));
+	if (!indio_dev) {
+		dev_err(&pdev->dev, "Failed allocating iio device\n");
+		return -ENOMEM;
+	}
+
+	info = iio_priv(indio_dev);
+	info->dev = &pdev->dev;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	info->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(info->regs))
+		return PTR_ERR(info->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(&pdev->dev, "no irq resource?\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_irq(info->dev, irq,
+				vf610_adc_isr, 0,
+				dev_name(&pdev->dev), info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", irq);
+		return ret;
+	}
+
+	info->clk = devm_clk_get(&pdev->dev, "adc");
+	if (IS_ERR(info->clk)) {
+		dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
+						PTR_ERR(info->clk));
+		ret = PTR_ERR(info->clk);
+		return ret;
+	}
+
+	info->vref = devm_regulator_get(&pdev->dev, "vref");
+	if (IS_ERR(info->vref))
+		return PTR_ERR(info->vref);
+
+	ret = regulator_enable(info->vref);
+	if (ret)
+		return ret;
+
+	info->vref_uv = regulator_get_voltage(info->vref);
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	init_completion(&info->completion);
+
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->dev.of_node = pdev->dev.of_node;
+	indio_dev->info = &vf610_adc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = vf610_adc_iio_channels;
+	indio_dev->num_channels = ARRAY_SIZE(vf610_adc_iio_channels);
+
+	ret = clk_prepare_enable(info->clk);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Could not prepare or enable the clock.\n");
+		goto error_adc_clk_enable;
+	}
+
+	vf610_adc_cfg_init(info);
+	vf610_adc_hw_init(info);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't register the device.\n");
+		goto error_iio_device_register;
+	}
+
+	return 0;
+
+
+error_iio_device_register:
+	clk_disable_unprepare(info->clk);
+error_adc_clk_enable:
+	regulator_disable(info->vref);
+
+	return ret;
+}
+
+static int vf610_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct vf610_adc *info = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	regulator_disable(info->vref);
+	clk_disable_unprepare(info->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int vf610_adc_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct vf610_adc *info = iio_priv(indio_dev);
+	int hc_cfg;
+
+	/* ADC controller enters to stop mode */
+	hc_cfg = readl(info->regs + VF610_REG_ADC_HC0);
+	hc_cfg |= VF610_ADC_CONV_DISABLE;
+	writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
+
+	clk_disable_unprepare(info->clk);
+	regulator_disable(info->vref);
+
+	return 0;
+}
+
+static int vf610_adc_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct vf610_adc *info = iio_priv(indio_dev);
+	int ret;
+
+	ret = regulator_enable(info->vref);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(info->clk);
+	if (ret)
+		return ret;
+
+	vf610_adc_hw_init(info);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops,
+			vf610_adc_suspend,
+			vf610_adc_resume);
+
+static struct platform_driver vf610_adc_driver = {
+	.probe          = vf610_adc_probe,
+	.remove         = vf610_adc_remove,
+	.driver         = {
+		.name   = DRIVER_NAME,
+		.owner  = THIS_MODULE,
+		.of_match_table = vf610_adc_match,
+		.pm     = &vf610_adc_pm_ops,
+	},
+};
+
+module_platform_driver(vf610_adc_driver);
+
+MODULE_AUTHOR("Fugang Duan <B38611@freescale.com>");
+MODULE_DESCRIPTION("Freescale VF610 ADC driver");
+MODULE_LICENSE("GPL v2");