iio: imu: add support to lsm6dsx driver

Add support to STM LSM6DS3-LSM6DSM 6-axis (acc + gyro) Mems sensor

http://www.st.com/resource/en/datasheet/lsm6ds3.pdf
http://www.st.com/resource/en/datasheet/lsm6dsm.pdf

- continuous mode support
- i2c support
- spi support
- sw fifo mode support
- supported devices: lsm6ds3, lsm6dsm

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

1 files changed, 118 insertions, 0 deletions

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
new file mode 100644
index 000000000000..fbe72470ed1e
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -0,0 +1,118 @@
+/*
+ * STMicroelectronics st_lsm6dsx spi driver
+ *
+ * Copyright 2016 STMicroelectronics Inc.
+ *
+ * Lorenzo Bianconi <lorenzo.bianconi@st.com>
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include "st_lsm6dsx.h"
+
+#define SENSORS_SPI_READ	BIT(7)
+
+static int st_lsm6dsx_spi_read(struct device *dev, u8 addr, int len,
+			       u8 *data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct st_lsm6dsx_hw *hw = spi_get_drvdata(spi);
+	int err;
+
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = hw->tb.tx_buf,
+			.bits_per_word = 8,
+			.len = 1,
+		},
+		{
+			.rx_buf = hw->tb.rx_buf,
+			.bits_per_word = 8,
+			.len = len,
+		}
+	};
+
+	hw->tb.tx_buf[0] = addr | SENSORS_SPI_READ;
+
+	err = spi_sync_transfer(spi, xfers,  ARRAY_SIZE(xfers));
+	if (err < 0)
+		return err;
+
+	memcpy(data, hw->tb.rx_buf, len * sizeof(u8));
+
+	return len;
+}
+
+static int st_lsm6dsx_spi_write(struct device *dev, u8 addr, int len,
+				u8 *data)
+{
+	struct st_lsm6dsx_hw *hw;
+	struct spi_device *spi;
+
+	if (len >= ST_LSM6DSX_TX_MAX_LENGTH)
+		return -ENOMEM;
+
+	spi = to_spi_device(dev);
+	hw = spi_get_drvdata(spi);
+
+	hw->tb.tx_buf[0] = addr;
+	memcpy(&hw->tb.tx_buf[1], data, len);
+
+	return spi_write(spi, hw->tb.tx_buf, len + 1);
+}
+
+static const struct st_lsm6dsx_transfer_function st_lsm6dsx_transfer_fn = {
+	.read = st_lsm6dsx_spi_read,
+	.write = st_lsm6dsx_spi_write,
+};
+
+static int st_lsm6dsx_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+
+	return st_lsm6dsx_probe(&spi->dev, spi->irq,
+				(int)id->driver_data,
+				&st_lsm6dsx_transfer_fn);
+}
+
+static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
+	{
+		.compatible = "st,lsm6ds3",
+		.data = (void *)ST_LSM6DS3_ID,
+	},
+	{
+		.compatible = "st,lsm6dsm",
+		.data = (void *)ST_LSM6DSM_ID,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
+
+static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
+	{ ST_LSM6DS3_DEV_NAME, ST_LSM6DS3_ID },
+	{ ST_LSM6DSM_DEV_NAME, ST_LSM6DSM_ID },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
+
+static struct spi_driver st_lsm6dsx_driver = {
+	.driver = {
+		.name = "st_lsm6dsx_spi",
+		.of_match_table = of_match_ptr(st_lsm6dsx_spi_of_match),
+	},
+	.probe = st_lsm6dsx_spi_probe,
+	.id_table = st_lsm6dsx_spi_id_table,
+};
+module_spi_driver(st_lsm6dsx_driver);
+
+MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi@st.com>");
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx spi driver");
+MODULE_LICENSE("GPL v2");