Merge tag 'iio-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanup for IIO in the 5.1 cycle

A number of interesting new devices supported plus a good set of staging
cleanup including one graduation and one drop.

New device support
* ad56886
  - Add support for AD5674R/AD5679R with some minor driver changes to support
    more channels.
* ad7768
  - New driver and dt bindings for this 24 bit ADC.
* max44009
  - New driver and dt bindings for this ambient light sensor.
* mpu6050
  - Support the ICM 20602 IMU. Minor tweaks due to slightly different
    register map.
* NPCM adc
  - New driver and dt bindings for this BMC ADC.
* Sensiron SGP30
  - Modifiers for ethanol and H2.
  - New driver and dt bindings.
  - Follow patch added self cleaning support.
* Sensiron SPS30
  - New channel type for mass concentration.
  - New driver and bindings.
  - Minor tidy up patch followed (drop fmt specifier as unused)
* st_pressure
  - lps22hh support. ID plus information structures and dt bindings.
* ti-ads124s08
  - Add binding doc and driver.

Staging graduations
* ad7606 driver and bindings.

Staging drops
* ad7152 CDC driver dropped.  This part is near EoL and no one is known
  to be using it.  If anyone surfaces obviously we can bring the driver
  back.  If not, good to drop it to avoid wasting anyone's time cleaning
  it up.

New features
* bme680
  - DT support and bindings doc.
* isl29018
  - Add regulator for VCC.
* mag3110
  - Add regulators for supplies.
* meson-saradc
  - Support the temperature sensors of more SoCs.
* mma8452
  - Add regulators for power suplies and binding docs to reflect them.
* st-accel
  - Support the undocumented but it seems fairly common _ONT ACPI method
    to specify orientation of the sensor.

Cleanup, minor fixes and fixes for staging driver that have been broken a
long time
* ad5933
  - Drop platform data alternative to specifying the reference voltage
    using a regulator.
  - Use the clock framework to contorl the reference clock.
  - Add a DT binding doc to cover the defacto binding.
* ad7280a
  - Split up some big functions to improve readability.
* ad7606
  - Allow for timeout if interrupt never occurs.
  - Use devm functions to simplify probe and remove.
  - Use the find_closest macro to avoid need for precise values from
    userspace.
  - Add missing vendor prefixes for various DT properties. Note the
    driver is in staging still and there are no known devicetrees.
  - Add explict OF device ID table.
  - Simplify the Kconfig choices
  - Change to a threaded IRQ.
  - SPDX and simple stype fixes.
* ad7816
  - Drop unnecessary variable init.
* ad9523
  - Check a return value that was ignored.
* ad9833
  - Drop platform data.  It was just setting most values to the hardware
    defaults.
  - Use the clock framework to provide the input clock.
* adt7316 (lots of staging cleanup)
  - Fix some wrong register / bit definitions
  - Invert the logic of the check for an ldac pin so it actually makes sense.
  - Read the right register to get internal vref settings
  - Allow adt751x chips to use the internal vref for all DAC channels rather
    than a subset.
  - Remove dac vref bypass control from parts that don't have one.
  - Make the store DAC update mode function consistent with the show one.
  - Fix some spellings and other minor tidy up.
  - Avoid passing irq numbers around by putting all the irq logic in
    one place.
  - Fix an issue with the resolution of DAC control.
  - Fix support of the high resolution DAC mode (for temp proportional output)
    where supported.
  - Fix DAC read and write calculations.
* st_lsm6dsx
  - Drop an unused variable (set but not read)
* xilinx-xadc
  - Check an unhandled return value.

* tag 'iio-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (67 commits)
  iio: chemical: sps30: remove printk format specifier
  staging: iio: frequency: ad9833: Load clock using clock framework
  staging: iio: frequency: ad9833: Get frequency value statically
  dt-bindings: iio: light: Add max44009
  iio: light: add driver for MAX44009
  dt-bindings: iio: adc: Add docs for AD7768-1
  iio: adc: Add AD7768-1 ADC basic support
  staging: iio: cdc: ad7152: remove driver completely
  iio: imu: mpu6050: Add support for the ICM 20602 IMU
  dt-bindings: iio: imu: add icm20602 bindings to mpu6050
  dt-bindings: iio: pressure: add LPS22HH bindings
  iio: st_accel: use ACPI orientation data
  iio: adc: add NPCM ADC driver
  dt-binding: iio: add NPCM ADC documentation
  iio: chemical: sps30: allow changing self cleaning period
  dt-bindings: iio: chemical: Add bindings for bme680
  iio: chemical: bme680: Add device-tree support
  iio:st_pressure:initial lps22hh sensor support
  iio: accell: mma8452: add vdd/vddio regulator operation support
  dt-bindings: iio: accel: mma8452: add power supplies property
  ...

6 files changed, 58 insertions, 9 deletions

diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index 5483b2ea754d..d2fe9dbddda7 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -13,8 +13,8 @@ config INV_MPU6050_I2C
 	select INV_MPU6050_IIO
 	select REGMAP_I2C
 	help
-	  This driver supports the Invensense MPU6050/6500/9150 and ICM20608
-	  motion tracking devices over I2C.
+	  This driver supports the Invensense MPU6050/6500/9150 and
+	  ICM20608/20602 motion tracking devices over I2C.
 	  This driver can be built as a module. The module will be called
 	  inv-mpu6050-i2c.
 
@@ -24,7 +24,7 @@ config INV_MPU6050_SPI
 	select INV_MPU6050_IIO
 	select REGMAP_SPI
 	help
-	  This driver supports the Invensense MPU6050/6500/9150 and ICM20608
-	  motion tracking devices over SPI.
+	  This driver supports the Invensense MPU6050/6500/9150 and
+	  ICM20608/20602 motion tracking devices over SPI.
 	  This driver can be built as a module. The module will be called
 	  inv-mpu6050-spi.
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 1e428c196a82..650de0fefb7b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -38,6 +38,29 @@ static const int gyro_scale_6050[] = {133090, 266181, 532362, 1064724};
  */
 static const int accel_scale[] = {598, 1196, 2392, 4785};
 
+static const struct inv_mpu6050_reg_map reg_set_icm20602 = {
+	.sample_rate_div	= INV_MPU6050_REG_SAMPLE_RATE_DIV,
+	.lpf                    = INV_MPU6050_REG_CONFIG,
+	.accel_lpf              = INV_MPU6500_REG_ACCEL_CONFIG_2,
+	.user_ctrl              = INV_MPU6050_REG_USER_CTRL,
+	.fifo_en                = INV_MPU6050_REG_FIFO_EN,
+	.gyro_config            = INV_MPU6050_REG_GYRO_CONFIG,
+	.accl_config            = INV_MPU6050_REG_ACCEL_CONFIG,
+	.fifo_count_h           = INV_MPU6050_REG_FIFO_COUNT_H,
+	.fifo_r_w               = INV_MPU6050_REG_FIFO_R_W,
+	.raw_gyro               = INV_MPU6050_REG_RAW_GYRO,
+	.raw_accl               = INV_MPU6050_REG_RAW_ACCEL,
+	.temperature            = INV_MPU6050_REG_TEMPERATURE,
+	.int_enable             = INV_MPU6050_REG_INT_ENABLE,
+	.int_status             = INV_MPU6050_REG_INT_STATUS,
+	.pwr_mgmt_1             = INV_MPU6050_REG_PWR_MGMT_1,
+	.pwr_mgmt_2             = INV_MPU6050_REG_PWR_MGMT_2,
+	.int_pin_cfg            = INV_MPU6050_REG_INT_PIN_CFG,
+	.accl_offset            = INV_MPU6500_REG_ACCEL_OFFSET,
+	.gyro_offset            = INV_MPU6050_REG_GYRO_OFFSET,
+	.i2c_if                 = INV_ICM20602_REG_I2C_IF,
+};
+
 static const struct inv_mpu6050_reg_map reg_set_6500 = {
 	.sample_rate_div	= INV_MPU6050_REG_SAMPLE_RATE_DIV,
 	.lpf                    = INV_MPU6050_REG_CONFIG,
@@ -58,6 +81,7 @@ static const struct inv_mpu6050_reg_map reg_set_6500 = {
 	.int_pin_cfg		= INV_MPU6050_REG_INT_PIN_CFG,
 	.accl_offset		= INV_MPU6500_REG_ACCEL_OFFSET,
 	.gyro_offset		= INV_MPU6050_REG_GYRO_OFFSET,
+	.i2c_if                 = 0,
 };
 
 static const struct inv_mpu6050_reg_map reg_set_6050 = {
@@ -78,6 +102,7 @@ static const struct inv_mpu6050_reg_map reg_set_6050 = {
 	.int_pin_cfg		= INV_MPU6050_REG_INT_PIN_CFG,
 	.accl_offset		= INV_MPU6050_REG_ACCEL_OFFSET,
 	.gyro_offset		= INV_MPU6050_REG_GYRO_OFFSET,
+	.i2c_if                 = 0,
 };
 
 static const struct inv_mpu6050_chip_config chip_config_6050 = {
@@ -140,6 +165,12 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.reg = &reg_set_6500,
 		.config = &chip_config_6050,
 	},
+	{
+		.whoami = INV_ICM20602_WHOAMI_VALUE,
+		.name = "ICM20602",
+		.reg = &reg_set_icm20602,
+		.config = &chip_config_6050,
+	},
 };
 
 int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index dd758e3d403d..e46eb4ddea21 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -127,6 +127,7 @@ static int inv_mpu_probe(struct i2c_client *client,
 	st = iio_priv(dev_get_drvdata(&client->dev));
 	switch (st->chip_type) {
 	case INV_ICM20608:
+	case INV_ICM20602:
 		/* no i2c auxiliary bus on the chip */
 		break;
 	default:
@@ -179,6 +180,7 @@ static const struct i2c_device_id inv_mpu_id[] = {
 	{"mpu9250", INV_MPU9250},
 	{"mpu9255", INV_MPU9255},
 	{"icm20608", INV_ICM20608},
+	{"icm20602", INV_ICM20602},
 	{}
 };
 
@@ -213,6 +215,10 @@ static const struct of_device_id inv_of_match[] = {
 		.compatible = "invensense,icm20608",
 		.data = (void *)INV_ICM20608
 	},
+	{
+		.compatible = "invensense,icm20602",
+		.data = (void *)INV_ICM20602
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, inv_of_match);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index 6bcc11fc1b88..325afd9f5f61 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -44,6 +44,7 @@
  *  @int_pin_cfg;	Controls interrupt pin configuration.
  *  @accl_offset:	Controls the accelerometer calibration offset.
  *  @gyro_offset:	Controls the gyroscope calibration offset.
+ *  @i2c_if:		Controls the i2c interface
  */
 struct inv_mpu6050_reg_map {
 	u8 sample_rate_div;
@@ -65,6 +66,7 @@ struct inv_mpu6050_reg_map {
 	u8 int_pin_cfg;
 	u8 accl_offset;
 	u8 gyro_offset;
+	u8 i2c_if;
 };
 
 /*device enum */
@@ -77,6 +79,7 @@ enum inv_devices {
 	INV_MPU9250,
 	INV_MPU9255,
 	INV_ICM20608,
+	INV_ICM20602,
 	INV_NUM_PARTS
 };
 
@@ -195,6 +198,10 @@ struct inv_mpu6050_state {
 #define INV_MPU6050_BIT_PWR_ACCL_STBY       0x38
 #define INV_MPU6050_BIT_PWR_GYRO_STBY       0x07
 
+/* ICM20602 register */
+#define INV_ICM20602_REG_I2C_IF             0x70
+#define INV_ICM20602_BIT_I2C_IF_DIS         0x40
+
 #define INV_MPU6050_REG_FIFO_COUNT_H        0x72
 #define INV_MPU6050_REG_FIFO_R_W            0x74
 
@@ -261,6 +268,7 @@ struct inv_mpu6050_state {
 #define INV_MPU9255_WHOAMI_VALUE		0x73
 #define INV_MPU6515_WHOAMI_VALUE		0x74
 #define INV_ICM20608_WHOAMI_VALUE		0xAF
+#define INV_ICM20602_WHOAMI_VALUE		0x12
 
 /* scan element definition */
 enum inv_mpu6050_scan {
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
index 227f50afff22..a112c3f45f74 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
@@ -31,9 +31,14 @@ static int inv_mpu_i2c_disable(struct iio_dev *indio_dev)
 	if (ret)
 		return ret;
 
-	st->chip_config.user_ctrl |= INV_MPU6050_BIT_I2C_IF_DIS;
-	ret = regmap_write(st->map, st->reg->user_ctrl,
-			   st->chip_config.user_ctrl);
+	if (st->reg->i2c_if) {
+		ret = regmap_write(st->map, st->reg->i2c_if,
+				   INV_ICM20602_BIT_I2C_IF_DIS);
+	} else {
+		st->chip_config.user_ctrl |= INV_MPU6050_BIT_I2C_IF_DIS;
+		ret = regmap_write(st->map, st->reg->user_ctrl,
+				   st->chip_config.user_ctrl);
+	}
 	if (ret) {
 		inv_mpu6050_set_power_itg(st, false);
 		return ret;
@@ -81,6 +86,7 @@ static const struct spi_device_id inv_mpu_id[] = {
 	{"mpu9250", INV_MPU9250},
 	{"mpu9255", INV_MPU9255},
 	{"icm20608", INV_ICM20608},
+	{"icm20602", INV_ICM20602},
 	{}
 };
 
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
index 8e47dccdd40f..66fbcd94642d 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
@@ -105,12 +105,10 @@ static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
 static int st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 addr,
 				    u8 *data, int len)
 {
-	const struct st_lsm6dsx_shub_settings *hub_settings;
 	int err;
 
 	mutex_lock(&hw->page_lock);
 
-	hub_settings = &hw->settings->shub_settings;
 	err = st_lsm6dsx_set_page(hw, true);
 	if (err < 0)
 		goto out;