Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 314 insertions, 314 deletions

diff --git a/drivers/isdn/capi/capiutil.c b/drivers/isdn/capi/capiutil.c
index 03c469e4451f..d26f17033b68 100644
--- a/drivers/isdn/capi/capiutil.c
+++ b/drivers/isdn/capi/capiutil.c
@@ -25,149 +25,149 @@
 #ifndef CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
 char *capi_info2str(u16 reason)
 {
-    return "..";
+	return "..";
 }
 #else
 char *capi_info2str(u16 reason)
 {
-    switch (reason) {
+	switch (reason) {
 
 /*-- informative values (corresponding message was processed) -----*/
 	case 0x0001:
-	   return "NCPI not supported by current protocol, NCPI ignored";
+		return "NCPI not supported by current protocol, NCPI ignored";
 	case 0x0002:
-	   return "Flags not supported by current protocol, flags ignored";
+		return "Flags not supported by current protocol, flags ignored";
 	case 0x0003:
-	   return "Alert already sent by another application";
+		return "Alert already sent by another application";
 
 /*-- error information concerning CAPI_REGISTER -----*/
 	case 0x1001:
-	   return "Too many applications";
+		return "Too many applications";
 	case 0x1002:
-	   return "Logical block size too small, must be at least 128 Bytes";
+		return "Logical block size too small, must be at least 128 Bytes";
 	case 0x1003:
-	   return "Buffer exceeds 64 kByte";
+		return "Buffer exceeds 64 kByte";
 	case 0x1004:
-	   return "Message buffer size too small, must be at least 1024 Bytes";
+		return "Message buffer size too small, must be at least 1024 Bytes";
 	case 0x1005:
-	   return "Max. number of logical connections not supported";
+		return "Max. number of logical connections not supported";
 	case 0x1006:
-	   return "Reserved";
+		return "Reserved";
 	case 0x1007:
-	   return "The message could not be accepted because of an internal busy condition";
+		return "The message could not be accepted because of an internal busy condition";
 	case 0x1008:
-	   return "OS resource error (no memory ?)";
+		return "OS resource error (no memory ?)";
 	case 0x1009:
-	   return "CAPI not installed";
+		return "CAPI not installed";
 	case 0x100A:
-	   return "Controller does not support external equipment";
+		return "Controller does not support external equipment";
 	case 0x100B:
-	   return "Controller does only support external equipment";
+		return "Controller does only support external equipment";
 
 /*-- error information concerning message exchange functions -----*/
 	case 0x1101:
-	   return "Illegal application number";
+		return "Illegal application number";
 	case 0x1102:
-	   return "Illegal command or subcommand or message length less than 12 bytes";
+		return "Illegal command or subcommand or message length less than 12 bytes";
 	case 0x1103:
-	   return "The message could not be accepted because of a queue full condition !! The error code does not imply that CAPI cannot receive messages directed to another controller, PLCI or NCCI";
+		return "The message could not be accepted because of a queue full condition !! The error code does not imply that CAPI cannot receive messages directed to another controller, PLCI or NCCI";
 	case 0x1104:
-	   return "Queue is empty";
+		return "Queue is empty";
 	case 0x1105:
-	   return "Queue overflow, a message was lost !! This indicates a configuration error. The only recovery from this error is to perform a CAPI_RELEASE";
+		return "Queue overflow, a message was lost !! This indicates a configuration error. The only recovery from this error is to perform a CAPI_RELEASE";
 	case 0x1106:
-	   return "Unknown notification parameter";
+		return "Unknown notification parameter";
 	case 0x1107:
-	   return "The Message could not be accepted because of an internal busy condition";
+		return "The Message could not be accepted because of an internal busy condition";
 	case 0x1108:
-	   return "OS Resource error (no memory ?)";
+		return "OS Resource error (no memory ?)";
 	case 0x1109:
-	   return "CAPI not installed";
+		return "CAPI not installed";
 	case 0x110A:
-	   return "Controller does not support external equipment";
+		return "Controller does not support external equipment";
 	case 0x110B:
-	   return "Controller does only support external equipment";
+		return "Controller does only support external equipment";
 
 /*-- error information concerning resource / coding problems -----*/
 	case 0x2001:
-	   return "Message not supported in current state";
+		return "Message not supported in current state";
 	case 0x2002:
-	   return "Illegal Controller / PLCI / NCCI";
+		return "Illegal Controller / PLCI / NCCI";
 	case 0x2003:
-	   return "Out of PLCI";
+		return "Out of PLCI";
 	case 0x2004:
-	   return "Out of NCCI";
+		return "Out of NCCI";
 	case 0x2005:
-	   return "Out of LISTEN";
+		return "Out of LISTEN";
 	case 0x2006:
-	   return "Out of FAX resources (protocol T.30)";
+		return "Out of FAX resources (protocol T.30)";
 	case 0x2007:
-	   return "Illegal message parameter coding";
+		return "Illegal message parameter coding";
 
 /*-- error information concerning requested services  -----*/
 	case 0x3001:
-	   return "B1 protocol not supported";
-	case 0x3002: 
-	   return "B2 protocol not supported";
-	case 0x3003: 
-	   return "B3 protocol not supported";
-	case 0x3004: 
-	   return "B1 protocol parameter not supported";
-	case 0x3005: 
-	   return "B2 protocol parameter not supported";
-	case 0x3006: 
-	   return "B3 protocol parameter not supported";
-	case 0x3007: 
-	   return "B protocol combination not supported";
-	case 0x3008: 
-	   return "NCPI not supported";
-	case 0x3009: 
-	   return "CIP Value unknown";
-	case 0x300A: 
-	   return "Flags not supported (reserved bits)";
-	case 0x300B: 
-	   return "Facility not supported";
-	case 0x300C: 
-	   return "Data length not supported by current protocol";
-	case 0x300D: 
-	   return "Reset procedure not supported by current protocol";
+		return "B1 protocol not supported";
+	case 0x3002:
+		return "B2 protocol not supported";
+	case 0x3003:
+		return "B3 protocol not supported";
+	case 0x3004:
+		return "B1 protocol parameter not supported";
+	case 0x3005:
+		return "B2 protocol parameter not supported";
+	case 0x3006:
+		return "B3 protocol parameter not supported";
+	case 0x3007:
+		return "B protocol combination not supported";
+	case 0x3008:
+		return "NCPI not supported";
+	case 0x3009:
+		return "CIP Value unknown";
+	case 0x300A:
+		return "Flags not supported (reserved bits)";
+	case 0x300B:
+		return "Facility not supported";
+	case 0x300C:
+		return "Data length not supported by current protocol";
+	case 0x300D:
+		return "Reset procedure not supported by current protocol";
 
 /*-- informations about the clearing of a physical connection -----*/
-	case 0x3301: 
-	   return "Protocol error layer 1 (broken line or B-channel removed by signalling protocol)";
-	case 0x3302: 
-	   return "Protocol error layer 2";
-	case 0x3303: 
-	   return "Protocol error layer 3";
-	case 0x3304: 
-	   return "Another application got that call";
+	case 0x3301:
+		return "Protocol error layer 1 (broken line or B-channel removed by signalling protocol)";
+	case 0x3302:
+		return "Protocol error layer 2";
+	case 0x3303:
+		return "Protocol error layer 3";
+	case 0x3304:
+		return "Another application got that call";
 /*-- T.30 specific reasons -----*/
-	case 0x3311: 
-	   return "Connecting not successful (remote station is no FAX G3 machine)";
-	case 0x3312: 
-	   return "Connecting not successful (training error)";
-	case 0x3313: 
-	   return "Disconnected before transfer (remote station does not support transfer mode, e.g. resolution)";
-	case 0x3314: 
-	   return "Disconnected during transfer (remote abort)";
-	case 0x3315: 
-	   return "Disconnected during transfer (remote procedure error, e.g. unsuccessful repetition of T.30 commands)";
-	case 0x3316: 
-	   return "Disconnected during transfer (local tx data underrun)";
-	case 0x3317: 
-	   return "Disconnected during transfer (local rx data overflow)";
-	case 0x3318: 
-	   return "Disconnected during transfer (local abort)";
-	case 0x3319: 
-	   return "Illegal parameter coding (e.g. SFF coding error)";
+	case 0x3311:
+		return "Connecting not successful (remote station is no FAX G3 machine)";
+	case 0x3312:
+		return "Connecting not successful (training error)";
+	case 0x3313:
+		return "Disconnected before transfer (remote station does not support transfer mode, e.g. resolution)";
+	case 0x3314:
+		return "Disconnected during transfer (remote abort)";
+	case 0x3315:
+		return "Disconnected during transfer (remote procedure error, e.g. unsuccessful repetition of T.30 commands)";
+	case 0x3316:
+		return "Disconnected during transfer (local tx data underrun)";
+	case 0x3317:
+		return "Disconnected during transfer (local rx data overflow)";
+	case 0x3318:
+		return "Disconnected during transfer (local abort)";
+	case 0x3319:
+		return "Illegal parameter coding (e.g. SFF coding error)";
 
 /*-- disconnect causes from the network according to ETS 300 102-1/Q.931 -----*/
 	case 0x3481: return "Unallocated (unassigned) number";
 	case 0x3482: return "No route to specified transit network";
 	case 0x3483: return "No route to destination";
 	case 0x3486: return "Channel unacceptable";
-	case 0x3487: 
-	   return "Call awarded and being delivered in an established channel";
+	case 0x3487:
+		return "Call awarded and being delivered in an established channel";
 	case 0x3490: return "Normal call clearing";
 	case 0x3491: return "User busy";
 	case 0x3492: return "No user responding";
@@ -217,7 +217,7 @@ char *capi_info2str(u16 reason)
 	case 0x34FF: return "Interworking, unspecified";
 
 	default: return "No additional information";
-    }
+	}
 }
 #endif
 
@@ -235,169 +235,169 @@ typedef struct {
 
 static _cdef cdef[] =
 {
-    /*00 */ 
- {_CEND},
-    /*01 */ 
- {_CEND},
-    /*02 */ 
- {_CEND},
-    /*03 */ 
- {_CDWORD, offsetof(_cmsg, adr.adrController)},
-    /*04 */ 
- {_CMSTRUCT, offsetof(_cmsg, AdditionalInfo)},
-    /*05 */ 
- {_CSTRUCT, offsetof(_cmsg, B1configuration)},
-    /*06 */ 
- {_CWORD, offsetof(_cmsg, B1protocol)},
-    /*07 */ 
- {_CSTRUCT, offsetof(_cmsg, B2configuration)},
-    /*08 */ 
- {_CWORD, offsetof(_cmsg, B2protocol)},
-    /*09 */ 
- {_CSTRUCT, offsetof(_cmsg, B3configuration)},
-    /*0a */ 
- {_CWORD, offsetof(_cmsg, B3protocol)},
-    /*0b */ 
- {_CSTRUCT, offsetof(_cmsg, BC)},
-    /*0c */ 
- {_CSTRUCT, offsetof(_cmsg, BChannelinformation)},
-    /*0d */ 
- {_CMSTRUCT, offsetof(_cmsg, BProtocol)},
-    /*0e */ 
- {_CSTRUCT, offsetof(_cmsg, CalledPartyNumber)},
-    /*0f */ 
- {_CSTRUCT, offsetof(_cmsg, CalledPartySubaddress)},
-    /*10 */ 
- {_CSTRUCT, offsetof(_cmsg, CallingPartyNumber)},
-    /*11 */ 
- {_CSTRUCT, offsetof(_cmsg, CallingPartySubaddress)},
-    /*12 */ 
- {_CDWORD, offsetof(_cmsg, CIPmask)},
-    /*13 */ 
- {_CDWORD, offsetof(_cmsg, CIPmask2)},
-    /*14 */ 
- {_CWORD, offsetof(_cmsg, CIPValue)},
-    /*15 */ 
- {_CDWORD, offsetof(_cmsg, Class)},
-    /*16 */ 
- {_CSTRUCT, offsetof(_cmsg, ConnectedNumber)},
-    /*17 */ 
- {_CSTRUCT, offsetof(_cmsg, ConnectedSubaddress)},
-    /*18 */ 
- {_CDWORD, offsetof(_cmsg, Data)},
-    /*19 */ 
- {_CWORD, offsetof(_cmsg, DataHandle)},
-    /*1a */ 
- {_CWORD, offsetof(_cmsg, DataLength)},
-    /*1b */ 
- {_CSTRUCT, offsetof(_cmsg, FacilityConfirmationParameter)},
-    /*1c */ 
- {_CSTRUCT, offsetof(_cmsg, Facilitydataarray)},
-    /*1d */ 
- {_CSTRUCT, offsetof(_cmsg, FacilityIndicationParameter)},
-    /*1e */ 
- {_CSTRUCT, offsetof(_cmsg, FacilityRequestParameter)},
-    /*1f */ 
- {_CWORD, offsetof(_cmsg, FacilitySelector)},
-    /*20 */ 
- {_CWORD, offsetof(_cmsg, Flags)},
-    /*21 */ 
- {_CDWORD, offsetof(_cmsg, Function)},
-    /*22 */ 
- {_CSTRUCT, offsetof(_cmsg, HLC)},
-    /*23 */ 
- {_CWORD, offsetof(_cmsg, Info)},
-    /*24 */ 
- {_CSTRUCT, offsetof(_cmsg, InfoElement)},
-    /*25 */ 
- {_CDWORD, offsetof(_cmsg, InfoMask)},
-    /*26 */ 
- {_CWORD, offsetof(_cmsg, InfoNumber)},
-    /*27 */ 
- {_CSTRUCT, offsetof(_cmsg, Keypadfacility)},
-    /*28 */ 
- {_CSTRUCT, offsetof(_cmsg, LLC)},
-    /*29 */ 
- {_CSTRUCT, offsetof(_cmsg, ManuData)},
-    /*2a */ 
- {_CDWORD, offsetof(_cmsg, ManuID)},
-    /*2b */ 
- {_CSTRUCT, offsetof(_cmsg, NCPI)},
-    /*2c */ 
- {_CWORD, offsetof(_cmsg, Reason)},
-    /*2d */ 
- {_CWORD, offsetof(_cmsg, Reason_B3)},
-    /*2e */ 
- {_CWORD, offsetof(_cmsg, Reject)},
-    /*2f */ 
- {_CSTRUCT, offsetof(_cmsg, Useruserdata)}
+	/*00 */
+	{_CEND},
+	/*01 */
+	{_CEND},
+	/*02 */
+	{_CEND},
+	/*03 */
+	{_CDWORD, offsetof(_cmsg, adr.adrController)},
+	/*04 */
+	{_CMSTRUCT, offsetof(_cmsg, AdditionalInfo)},
+	/*05 */
+	{_CSTRUCT, offsetof(_cmsg, B1configuration)},
+	/*06 */
+	{_CWORD, offsetof(_cmsg, B1protocol)},
+	/*07 */
+	{_CSTRUCT, offsetof(_cmsg, B2configuration)},
+	/*08 */
+	{_CWORD, offsetof(_cmsg, B2protocol)},
+	/*09 */
+	{_CSTRUCT, offsetof(_cmsg, B3configuration)},
+	/*0a */
+	{_CWORD, offsetof(_cmsg, B3protocol)},
+	/*0b */
+	{_CSTRUCT, offsetof(_cmsg, BC)},
+	/*0c */
+	{_CSTRUCT, offsetof(_cmsg, BChannelinformation)},
+	/*0d */
+	{_CMSTRUCT, offsetof(_cmsg, BProtocol)},
+	/*0e */
+	{_CSTRUCT, offsetof(_cmsg, CalledPartyNumber)},
+	/*0f */
+	{_CSTRUCT, offsetof(_cmsg, CalledPartySubaddress)},
+	/*10 */
+	{_CSTRUCT, offsetof(_cmsg, CallingPartyNumber)},
+	/*11 */
+	{_CSTRUCT, offsetof(_cmsg, CallingPartySubaddress)},
+	/*12 */
+	{_CDWORD, offsetof(_cmsg, CIPmask)},
+	/*13 */
+	{_CDWORD, offsetof(_cmsg, CIPmask2)},
+	/*14 */
+	{_CWORD, offsetof(_cmsg, CIPValue)},
+	/*15 */
+	{_CDWORD, offsetof(_cmsg, Class)},
+	/*16 */
+	{_CSTRUCT, offsetof(_cmsg, ConnectedNumber)},
+	/*17 */
+	{_CSTRUCT, offsetof(_cmsg, ConnectedSubaddress)},
+	/*18 */
+	{_CDWORD, offsetof(_cmsg, Data)},
+	/*19 */
+	{_CWORD, offsetof(_cmsg, DataHandle)},
+	/*1a */
+	{_CWORD, offsetof(_cmsg, DataLength)},
+	/*1b */
+	{_CSTRUCT, offsetof(_cmsg, FacilityConfirmationParameter)},
+	/*1c */
+	{_CSTRUCT, offsetof(_cmsg, Facilitydataarray)},
+	/*1d */
+	{_CSTRUCT, offsetof(_cmsg, FacilityIndicationParameter)},
+	/*1e */
+	{_CSTRUCT, offsetof(_cmsg, FacilityRequestParameter)},
+	/*1f */
+	{_CWORD, offsetof(_cmsg, FacilitySelector)},
+	/*20 */
+	{_CWORD, offsetof(_cmsg, Flags)},
+	/*21 */
+	{_CDWORD, offsetof(_cmsg, Function)},
+	/*22 */
+	{_CSTRUCT, offsetof(_cmsg, HLC)},
+	/*23 */
+	{_CWORD, offsetof(_cmsg, Info)},
+	/*24 */
+	{_CSTRUCT, offsetof(_cmsg, InfoElement)},
+	/*25 */
+	{_CDWORD, offsetof(_cmsg, InfoMask)},
+	/*26 */
+	{_CWORD, offsetof(_cmsg, InfoNumber)},
+	/*27 */
+	{_CSTRUCT, offsetof(_cmsg, Keypadfacility)},
+	/*28 */
+	{_CSTRUCT, offsetof(_cmsg, LLC)},
+	/*29 */
+	{_CSTRUCT, offsetof(_cmsg, ManuData)},
+	/*2a */
+	{_CDWORD, offsetof(_cmsg, ManuID)},
+	/*2b */
+	{_CSTRUCT, offsetof(_cmsg, NCPI)},
+	/*2c */
+	{_CWORD, offsetof(_cmsg, Reason)},
+	/*2d */
+	{_CWORD, offsetof(_cmsg, Reason_B3)},
+	/*2e */
+	{_CWORD, offsetof(_cmsg, Reject)},
+	/*2f */
+	{_CSTRUCT, offsetof(_cmsg, Useruserdata)}
 };
 
 static unsigned char *cpars[] =
 {
-    /* ALERT_REQ */ [0x01] = "\x03\x04\x0c\x27\x2f\x1c\x01\x01",
-    /* CONNECT_REQ */ [0x02] = "\x03\x14\x0e\x10\x0f\x11\x0d\x06\x08\x0a\x05\x07\x09\x01\x0b\x28\x22\x04\x0c\x27\x2f\x1c\x01\x01",
-    /* DISCONNECT_REQ */ [0x04] = "\x03\x04\x0c\x27\x2f\x1c\x01\x01",
-    /* LISTEN_REQ */ [0x05] = "\x03\x25\x12\x13\x10\x11\x01",
-    /* INFO_REQ */ [0x08] = "\x03\x0e\x04\x0c\x27\x2f\x1c\x01\x01",
-    /* FACILITY_REQ */ [0x09] = "\x03\x1f\x1e\x01",
-    /* SELECT_B_PROTOCOL_REQ */ [0x0a] = "\x03\x0d\x06\x08\x0a\x05\x07\x09\x01\x01",
-    /* CONNECT_B3_REQ */ [0x0b] = "\x03\x2b\x01",
-    /* DISCONNECT_B3_REQ */ [0x0d] = "\x03\x2b\x01",
-    /* DATA_B3_REQ */ [0x0f] = "\x03\x18\x1a\x19\x20\x01",
-    /* RESET_B3_REQ */ [0x10] = "\x03\x2b\x01",
-    /* ALERT_CONF */ [0x13] = "\x03\x23\x01",
-    /* CONNECT_CONF */ [0x14] = "\x03\x23\x01",
-    /* DISCONNECT_CONF */ [0x16] = "\x03\x23\x01",
-    /* LISTEN_CONF */ [0x17] = "\x03\x23\x01",
-    /* MANUFACTURER_REQ */ [0x18] = "\x03\x2a\x15\x21\x29\x01",
-    /* INFO_CONF */ [0x1a] = "\x03\x23\x01",
-    /* FACILITY_CONF */ [0x1b] = "\x03\x23\x1f\x1b\x01",
-    /* SELECT_B_PROTOCOL_CONF */ [0x1c] = "\x03\x23\x01",
-    /* CONNECT_B3_CONF */ [0x1d] = "\x03\x23\x01",
-    /* DISCONNECT_B3_CONF */ [0x1f] = "\x03\x23\x01",
-    /* DATA_B3_CONF */ [0x21] = "\x03\x19\x23\x01",
-    /* RESET_B3_CONF */ [0x22] = "\x03\x23\x01",
-    /* CONNECT_IND */ [0x26] = "\x03\x14\x0e\x10\x0f\x11\x0b\x28\x22\x04\x0c\x27\x2f\x1c\x01\x01",
-    /* CONNECT_ACTIVE_IND */ [0x27] = "\x03\x16\x17\x28\x01",
-    /* DISCONNECT_IND */ [0x28] = "\x03\x2c\x01",
-    /* MANUFACTURER_CONF */ [0x2a] = "\x03\x2a\x15\x21\x29\x01",
-    /* INFO_IND */ [0x2c] = "\x03\x26\x24\x01",
-    /* FACILITY_IND */ [0x2d] = "\x03\x1f\x1d\x01",
-    /* CONNECT_B3_IND */ [0x2f] = "\x03\x2b\x01",
-    /* CONNECT_B3_ACTIVE_IND */ [0x30] = "\x03\x2b\x01",
-    /* DISCONNECT_B3_IND */ [0x31] = "\x03\x2d\x2b\x01",
-    /* DATA_B3_IND */ [0x33] = "\x03\x18\x1a\x19\x20\x01",
-    /* RESET_B3_IND */ [0x34] = "\x03\x2b\x01",
-    /* CONNECT_B3_T90_ACTIVE_IND */ [0x35] = "\x03\x2b\x01",
-    /* CONNECT_RESP */ [0x38] = "\x03\x2e\x0d\x06\x08\x0a\x05\x07\x09\x01\x16\x17\x28\x04\x0c\x27\x2f\x1c\x01\x01",
-    /* CONNECT_ACTIVE_RESP */ [0x39] = "\x03\x01",
-    /* DISCONNECT_RESP */ [0x3a] = "\x03\x01",
-    /* MANUFACTURER_IND */ [0x3c] = "\x03\x2a\x15\x21\x29\x01",
-    /* INFO_RESP */ [0x3e] = "\x03\x01",
-    /* FACILITY_RESP */ [0x3f] = "\x03\x1f\x01",
-    /* CONNECT_B3_RESP */ [0x41] = "\x03\x2e\x2b\x01",
-    /* CONNECT_B3_ACTIVE_RESP */ [0x42] = "\x03\x01",
-    /* DISCONNECT_B3_RESP */ [0x43] = "\x03\x01",
-    /* DATA_B3_RESP */ [0x45] = "\x03\x19\x01",
-    /* RESET_B3_RESP */ [0x46] = "\x03\x01",
-    /* CONNECT_B3_T90_ACTIVE_RESP */ [0x47] = "\x03\x01",
-    /* MANUFACTURER_RESP */ [0x4e] = "\x03\x2a\x15\x21\x29\x01",
+	/* ALERT_REQ */ [0x01] = "\x03\x04\x0c\x27\x2f\x1c\x01\x01",
+	/* CONNECT_REQ */ [0x02] = "\x03\x14\x0e\x10\x0f\x11\x0d\x06\x08\x0a\x05\x07\x09\x01\x0b\x28\x22\x04\x0c\x27\x2f\x1c\x01\x01",
+	/* DISCONNECT_REQ */ [0x04] = "\x03\x04\x0c\x27\x2f\x1c\x01\x01",
+	/* LISTEN_REQ */ [0x05] = "\x03\x25\x12\x13\x10\x11\x01",
+	/* INFO_REQ */ [0x08] = "\x03\x0e\x04\x0c\x27\x2f\x1c\x01\x01",
+	/* FACILITY_REQ */ [0x09] = "\x03\x1f\x1e\x01",
+	/* SELECT_B_PROTOCOL_REQ */ [0x0a] = "\x03\x0d\x06\x08\x0a\x05\x07\x09\x01\x01",
+	/* CONNECT_B3_REQ */ [0x0b] = "\x03\x2b\x01",
+	/* DISCONNECT_B3_REQ */ [0x0d] = "\x03\x2b\x01",
+	/* DATA_B3_REQ */ [0x0f] = "\x03\x18\x1a\x19\x20\x01",
+	/* RESET_B3_REQ */ [0x10] = "\x03\x2b\x01",
+	/* ALERT_CONF */ [0x13] = "\x03\x23\x01",
+	/* CONNECT_CONF */ [0x14] = "\x03\x23\x01",
+	/* DISCONNECT_CONF */ [0x16] = "\x03\x23\x01",
+	/* LISTEN_CONF */ [0x17] = "\x03\x23\x01",
+	/* MANUFACTURER_REQ */ [0x18] = "\x03\x2a\x15\x21\x29\x01",
+	/* INFO_CONF */ [0x1a] = "\x03\x23\x01",
+	/* FACILITY_CONF */ [0x1b] = "\x03\x23\x1f\x1b\x01",
+	/* SELECT_B_PROTOCOL_CONF */ [0x1c] = "\x03\x23\x01",
+	/* CONNECT_B3_CONF */ [0x1d] = "\x03\x23\x01",
+	/* DISCONNECT_B3_CONF */ [0x1f] = "\x03\x23\x01",
+	/* DATA_B3_CONF */ [0x21] = "\x03\x19\x23\x01",
+	/* RESET_B3_CONF */ [0x22] = "\x03\x23\x01",
+	/* CONNECT_IND */ [0x26] = "\x03\x14\x0e\x10\x0f\x11\x0b\x28\x22\x04\x0c\x27\x2f\x1c\x01\x01",
+	/* CONNECT_ACTIVE_IND */ [0x27] = "\x03\x16\x17\x28\x01",
+	/* DISCONNECT_IND */ [0x28] = "\x03\x2c\x01",
+	/* MANUFACTURER_CONF */ [0x2a] = "\x03\x2a\x15\x21\x29\x01",
+	/* INFO_IND */ [0x2c] = "\x03\x26\x24\x01",
+	/* FACILITY_IND */ [0x2d] = "\x03\x1f\x1d\x01",
+	/* CONNECT_B3_IND */ [0x2f] = "\x03\x2b\x01",
+	/* CONNECT_B3_ACTIVE_IND */ [0x30] = "\x03\x2b\x01",
+	/* DISCONNECT_B3_IND */ [0x31] = "\x03\x2d\x2b\x01",
+	/* DATA_B3_IND */ [0x33] = "\x03\x18\x1a\x19\x20\x01",
+	/* RESET_B3_IND */ [0x34] = "\x03\x2b\x01",
+	/* CONNECT_B3_T90_ACTIVE_IND */ [0x35] = "\x03\x2b\x01",
+	/* CONNECT_RESP */ [0x38] = "\x03\x2e\x0d\x06\x08\x0a\x05\x07\x09\x01\x16\x17\x28\x04\x0c\x27\x2f\x1c\x01\x01",
+	/* CONNECT_ACTIVE_RESP */ [0x39] = "\x03\x01",
+	/* DISCONNECT_RESP */ [0x3a] = "\x03\x01",
+	/* MANUFACTURER_IND */ [0x3c] = "\x03\x2a\x15\x21\x29\x01",
+	/* INFO_RESP */ [0x3e] = "\x03\x01",
+	/* FACILITY_RESP */ [0x3f] = "\x03\x1f\x01",
+	/* CONNECT_B3_RESP */ [0x41] = "\x03\x2e\x2b\x01",
+	/* CONNECT_B3_ACTIVE_RESP */ [0x42] = "\x03\x01",
+	/* DISCONNECT_B3_RESP */ [0x43] = "\x03\x01",
+	/* DATA_B3_RESP */ [0x45] = "\x03\x19\x01",
+	/* RESET_B3_RESP */ [0x46] = "\x03\x01",
+	/* CONNECT_B3_T90_ACTIVE_RESP */ [0x47] = "\x03\x01",
+	/* MANUFACTURER_RESP */ [0x4e] = "\x03\x2a\x15\x21\x29\x01",
 };
 
 /*-------------------------------------------------------*/
 
-#define byteTLcpy(x,y)        *(u8 *)(x)=*(u8 *)(y);
-#define wordTLcpy(x,y)        *(u16 *)(x)=*(u16 *)(y);
-#define dwordTLcpy(x,y)       memcpy(x,y,4);
-#define structTLcpy(x,y,l)    memcpy (x,y,l)
-#define structTLcpyovl(x,y,l) memmove (x,y,l)
+#define byteTLcpy(x, y)         *(u8 *)(x) = *(u8 *)(y);
+#define wordTLcpy(x, y)         *(u16 *)(x) = *(u16 *)(y);
+#define dwordTLcpy(x, y)        memcpy(x, y, 4);
+#define structTLcpy(x, y, l)    memcpy(x, y, l)
+#define structTLcpyovl(x, y, l) memmove(x, y, l)
 
-#define byteTRcpy(x,y)        *(u8 *)(y)=*(u8 *)(x);
-#define wordTRcpy(x,y)        *(u16 *)(y)=*(u16 *)(x);
-#define dwordTRcpy(x,y)       memcpy(y,x,4);
-#define structTRcpy(x,y,l)    memcpy (y,x,l)
-#define structTRcpyovl(x,y,l) memmove (y,x,l)
+#define byteTRcpy(x, y)         *(u8 *)(y) = *(u8 *)(x);
+#define wordTRcpy(x, y)         *(u16 *)(y) = *(u16 *)(x);
+#define dwordTRcpy(x, y)        memcpy(y, x, 4);
+#define structTRcpy(x, y, l)    memcpy(y, x, l)
+#define structTRcpyovl(x, y, l) memmove(y, x, l)
 
 /*-------------------------------------------------------*/
 static unsigned command_2_index(unsigned c, unsigned sc)
@@ -414,9 +414,9 @@ static unsigned command_2_index(unsigned c, unsigned sc)
 
 /*-------------------------------------------------------*/
 #define TYP (cdef[cmsg->par[cmsg->p]].typ)
-#define OFF (((u8 *)cmsg)+cdef[cmsg->par[cmsg->p]].off)
+#define OFF (((u8 *)cmsg) + cdef[cmsg->par[cmsg->p]].off)
 
-static void jumpcstruct(_cmsg * cmsg)
+static void jumpcstruct(_cmsg *cmsg)
 {
 	unsigned layer;
 	for (cmsg->p++, layer = 1; layer;) {
@@ -433,7 +433,7 @@ static void jumpcstruct(_cmsg * cmsg)
 	}
 }
 /*-------------------------------------------------------*/
-static void pars_2_message(_cmsg * cmsg)
+static void pars_2_message(_cmsg *cmsg)
 {
 
 	for (; TYP != _CEND; cmsg->p++) {
@@ -499,7 +499,7 @@ static void pars_2_message(_cmsg * cmsg)
  * Return value: 0 for success
  */
 
-unsigned capi_cmsg2message(_cmsg * cmsg, u8 * msg)
+unsigned capi_cmsg2message(_cmsg *cmsg, u8 *msg)
 {
 	cmsg->m = msg;
 	cmsg->l = 8;
@@ -518,7 +518,7 @@ unsigned capi_cmsg2message(_cmsg * cmsg, u8 * msg)
 }
 
 /*-------------------------------------------------------*/
-static void message_2_pars(_cmsg * cmsg)
+static void message_2_pars(_cmsg *cmsg)
 {
 	for (; TYP != _CEND; cmsg->p++) {
 
@@ -569,7 +569,7 @@ static void message_2_pars(_cmsg * cmsg)
  * Return value: 0 for success
  */
 
-unsigned capi_message2cmsg(_cmsg * cmsg, u8 * msg)
+unsigned capi_message2cmsg(_cmsg *cmsg, u8 *msg)
 {
 	memset(cmsg, 0, sizeof(_cmsg));
 	cmsg->m = msg;
@@ -600,7 +600,7 @@ unsigned capi_message2cmsg(_cmsg * cmsg, u8 * msg)
  * Return value: 0 for success
  */
 
-unsigned capi_cmsg_header(_cmsg * cmsg, u16 _ApplId,
+unsigned capi_cmsg_header(_cmsg *cmsg, u16 _ApplId,
 			  u8 _Command, u8 _Subcommand,
 			  u16 _Messagenumber, u32 _Controller)
 {
@@ -689,54 +689,54 @@ char *capi_cmd2str(u8 cmd, u8 subcmd)
 
 static char *pnames[] =
 {
-    /*00 */ NULL,
-    /*01 */ NULL,
-    /*02 */ NULL,
-    /*03 */ "Controller/PLCI/NCCI",
-    /*04 */ "AdditionalInfo",
-    /*05 */ "B1configuration",
-    /*06 */ "B1protocol",
-    /*07 */ "B2configuration",
-    /*08 */ "B2protocol",
-    /*09 */ "B3configuration",
-    /*0a */ "B3protocol",
-    /*0b */ "BC",
-    /*0c */ "BChannelinformation",
-    /*0d */ "BProtocol",
-    /*0e */ "CalledPartyNumber",
-    /*0f */ "CalledPartySubaddress",
-    /*10 */ "CallingPartyNumber",
-    /*11 */ "CallingPartySubaddress",
-    /*12 */ "CIPmask",
-    /*13 */ "CIPmask2",
-    /*14 */ "CIPValue",
-    /*15 */ "Class",
-    /*16 */ "ConnectedNumber",
-    /*17 */ "ConnectedSubaddress",
-    /*18 */ "Data32",
-    /*19 */ "DataHandle",
-    /*1a */ "DataLength",
-    /*1b */ "FacilityConfirmationParameter",
-    /*1c */ "Facilitydataarray",
-    /*1d */ "FacilityIndicationParameter",
-    /*1e */ "FacilityRequestParameter",
-    /*1f */ "FacilitySelector",
-    /*20 */ "Flags",
-    /*21 */ "Function",
-    /*22 */ "HLC",
-    /*23 */ "Info",
-    /*24 */ "InfoElement",
-    /*25 */ "InfoMask",
-    /*26 */ "InfoNumber",
-    /*27 */ "Keypadfacility",
-    /*28 */ "LLC",
-    /*29 */ "ManuData",
-    /*2a */ "ManuID",
-    /*2b */ "NCPI",
-    /*2c */ "Reason",
-    /*2d */ "Reason_B3",
-    /*2e */ "Reject",
-    /*2f */ "Useruserdata"
+	/*00 */ NULL,
+	/*01 */ NULL,
+	/*02 */ NULL,
+	/*03 */ "Controller/PLCI/NCCI",
+	/*04 */ "AdditionalInfo",
+	/*05 */ "B1configuration",
+	/*06 */ "B1protocol",
+	/*07 */ "B2configuration",
+	/*08 */ "B2protocol",
+	/*09 */ "B3configuration",
+	/*0a */ "B3protocol",
+	/*0b */ "BC",
+	/*0c */ "BChannelinformation",
+	/*0d */ "BProtocol",
+	/*0e */ "CalledPartyNumber",
+	/*0f */ "CalledPartySubaddress",
+	/*10 */ "CallingPartyNumber",
+	/*11 */ "CallingPartySubaddress",
+	/*12 */ "CIPmask",
+	/*13 */ "CIPmask2",
+	/*14 */ "CIPValue",
+	/*15 */ "Class",
+	/*16 */ "ConnectedNumber",
+	/*17 */ "ConnectedSubaddress",
+	/*18 */ "Data32",
+	/*19 */ "DataHandle",
+	/*1a */ "DataLength",
+	/*1b */ "FacilityConfirmationParameter",
+	/*1c */ "Facilitydataarray",
+	/*1d */ "FacilityIndicationParameter",
+	/*1e */ "FacilityRequestParameter",
+	/*1f */ "FacilitySelector",
+	/*20 */ "Flags",
+	/*21 */ "Function",
+	/*22 */ "HLC",
+	/*23 */ "Info",
+	/*24 */ "InfoElement",
+	/*25 */ "InfoMask",
+	/*26 */ "InfoNumber",
+	/*27 */ "Keypadfacility",
+	/*28 */ "LLC",
+	/*29 */ "ManuData",
+	/*2a */ "ManuID",
+	/*2b */ "NCPI",
+	/*2c */ "Reason",
+	/*2d */ "Reason_B3",
+	/*2e */ "Reject",
+	/*2f */ "Useruserdata"
 };
 
 
@@ -744,10 +744,10 @@ static char *pnames[] =
 #include <stdarg.h>
 
 /*-------------------------------------------------------*/
-static _cdebbuf *bufprint(_cdebbuf *cdb, char *fmt,...)
+static _cdebbuf *bufprint(_cdebbuf *cdb, char *fmt, ...)
 {
 	va_list f;
-	size_t n,r;
+	size_t n, r;
 
 	if (!cdb)
 		return NULL;
@@ -783,7 +783,7 @@ static _cdebbuf *bufprint(_cdebbuf *cdb, char *fmt,...)
 	return cdb;
 }
 
-static _cdebbuf *printstructlen(_cdebbuf *cdb, u8 * m, unsigned len)
+static _cdebbuf *printstructlen(_cdebbuf *cdb, u8 *m, unsigned len)
 {
 	unsigned hex = 0;
 
@@ -807,7 +807,7 @@ static _cdebbuf *printstructlen(_cdebbuf *cdb, u8 * m, unsigned len)
 	return cdb;
 }
 
-static _cdebbuf *printstruct(_cdebbuf *cdb, u8 * m)
+static _cdebbuf *printstruct(_cdebbuf *cdb, u8 *m)
 {
 	unsigned len;
 
@@ -940,7 +940,7 @@ void cdebbuf_free(_cdebbuf *cdb)
  * The returned buffer should be freed by a call to cdebbuf_free() after use.
  */
 
-_cdebbuf *capi_message2str(u8 * msg)
+_cdebbuf *capi_message2str(u8 *msg)
 {
 	_cdebbuf *cdb;
 	_cmsg	*cmsg;
@@ -964,10 +964,10 @@ _cdebbuf *capi_message2str(u8 * msg)
 	cmsg->par = cpars[command_2_index(cmsg->Command, cmsg->Subcommand)];
 
 	cdb = bufprint(cdb, "%-26s ID=%03d #0x%04x LEN=%04d\n",
-		 mnames[command_2_index(cmsg->Command, cmsg->Subcommand)],
-		 ((unsigned short *) msg)[1],
-		 ((unsigned short *) msg)[3],
-		 ((unsigned short *) msg)[0]);
+		       mnames[command_2_index(cmsg->Command, cmsg->Subcommand)],
+		       ((unsigned short *) msg)[1],
+		       ((unsigned short *) msg)[3],
+		       ((unsigned short *) msg)[0]);
 
 	cdb = protocol_message_2_pars(cdb, cmsg, 1);
 	if (unlikely(cmsg != g_cmsg))
@@ -986,7 +986,7 @@ _cdebbuf *capi_message2str(u8 * msg)
  * The returned buffer should be freed by a call to cdebbuf_free() after use.
  */
 
-_cdebbuf *capi_cmsg2str(_cmsg * cmsg)
+_cdebbuf *capi_cmsg2str(_cmsg *cmsg)
 {
 	_cdebbuf *cdb;
 
@@ -998,17 +998,17 @@ _cdebbuf *capi_cmsg2str(_cmsg * cmsg)
 	cmsg->l = 8;
 	cmsg->p = 0;
 	cdb = bufprint(cdb, "%s ID=%03d #0x%04x LEN=%04d\n",
-		 mnames[command_2_index(cmsg->Command, cmsg->Subcommand)],
-		 ((u16 *) cmsg->m)[1],
-		 ((u16 *) cmsg->m)[3],
-		 ((u16 *) cmsg->m)[0]);
+		       mnames[command_2_index(cmsg->Command, cmsg->Subcommand)],
+		       ((u16 *) cmsg->m)[1],
+		       ((u16 *) cmsg->m)[3],
+		       ((u16 *) cmsg->m)[0]);
 	cdb = protocol_message_2_pars(cdb, cmsg, 1);
 	return cdb;
 }
 
 int __init cdebug_init(void)
 {
-	g_cmsg= kmalloc(sizeof(_cmsg), GFP_KERNEL);
+	g_cmsg = kmalloc(sizeof(_cmsg), GFP_KERNEL);
 	if (!g_cmsg)
 		return -ENOMEM;
 	g_debbuf = kmalloc(sizeof(_cdebbuf), GFP_KERNEL);
@@ -1041,12 +1041,12 @@ void __exit cdebug_exit(void)
 
 static _cdebbuf g_debbuf = {"CONFIG_CAPI_TRACE not enabled", NULL, 0, 0};
 
-_cdebbuf *capi_message2str(u8 * msg)
+_cdebbuf *capi_message2str(u8 *msg)
 {
 	return &g_debbuf;
 }
 
-_cdebbuf *capi_cmsg2str(_cmsg * cmsg)
+_cdebbuf *capi_cmsg2str(_cmsg *cmsg)
 {
 	return &g_debbuf;
 }