aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/macintosh
diff options
context:
space:
mode:
authorFinn Thain <fthain@telegraphics.com.au>2018-09-11 20:18:44 -0400
committerMichael Ellerman <mpe@ellerman.id.au>2018-10-08 22:53:10 +1100
commit47fd2060660e62b169990a6fcd9eb61bc1a85c5c (patch)
tree8109658e562e4ceb306fbda93312b843aa597e6f /drivers/macintosh
parentmacintosh/via-macii, macintosh/adb-iop: Modernize printk calls (diff)
downloadlinux-dev-47fd2060660e62b169990a6fcd9eb61bc1a85c5c.tar.xz
linux-dev-47fd2060660e62b169990a6fcd9eb61bc1a85c5c.zip
macintosh/via-macii, macintosh/adb-iop: Clean up whitespace
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Diffstat (limited to 'drivers/macintosh')
-rw-r--r--drivers/macintosh/adb-iop.c48
-rw-r--r--drivers/macintosh/via-macii.c286
2 files changed, 174 insertions, 160 deletions
diff --git a/drivers/macintosh/adb-iop.c b/drivers/macintosh/adb-iop.c
index 3a1e995ecc0e..fca31640e3ef 100644
--- a/drivers/macintosh/adb-iop.c
+++ b/drivers/macintosh/adb-iop.c
@@ -20,13 +20,13 @@
#include <linux/init.h>
#include <linux/proc_fs.h>
-#include <asm/macintosh.h>
-#include <asm/macints.h>
+#include <asm/macintosh.h>
+#include <asm/macints.h>
#include <asm/mac_iop.h>
#include <asm/mac_oss.h>
#include <asm/adb_iop.h>
-#include <linux/adb.h>
+#include <linux/adb.h>
/*#define DEBUG_ADB_IOP*/
@@ -38,9 +38,9 @@ static unsigned char *reply_ptr;
#endif
static enum adb_iop_state {
- idle,
- sending,
- awaiting_reply
+ idle,
+ sending,
+ awaiting_reply
} adb_iop_state;
static void adb_iop_start(void);
@@ -66,7 +66,8 @@ static void adb_iop_end_req(struct adb_request *req, int state)
{
req->complete = 1;
current_req = req->next;
- if (req->done) (*req->done)(req);
+ if (req->done)
+ (*req->done)(req);
adb_iop_state = state;
}
@@ -100,7 +101,7 @@ static void adb_iop_complete(struct iop_msg *msg)
static void adb_iop_listen(struct iop_msg *msg)
{
- struct adb_iopmsg *amsg = (struct adb_iopmsg *) msg->message;
+ struct adb_iopmsg *amsg = (struct adb_iopmsg *)msg->message;
struct adb_request *req;
unsigned long flags;
#ifdef DEBUG_ADB_IOP
@@ -113,9 +114,9 @@ static void adb_iop_listen(struct iop_msg *msg)
#ifdef DEBUG_ADB_IOP
printk("adb_iop_listen %p: rcvd packet, %d bytes: %02X %02X", req,
- (uint) amsg->count + 2, (uint) amsg->flags, (uint) amsg->cmd);
+ (uint)amsg->count + 2, (uint)amsg->flags, (uint)amsg->cmd);
for (i = 0; i < amsg->count; i++)
- printk(" %02X", (uint) amsg->data[i]);
+ printk(" %02X", (uint)amsg->data[i]);
printk("\n");
#endif
@@ -168,14 +169,15 @@ static void adb_iop_start(void)
/* get the packet to send */
req = current_req;
- if (!req) return;
+ if (!req)
+ return;
local_irq_save(flags);
#ifdef DEBUG_ADB_IOP
printk("adb_iop_start %p: sending packet, %d bytes:", req, req->nbytes);
- for (i = 0 ; i < req->nbytes ; i++)
- printk(" %02X", (uint) req->data[i]);
+ for (i = 0; i < req->nbytes; i++)
+ printk(" %02X", (uint)req->data[i]);
printk("\n");
#endif
@@ -196,13 +198,14 @@ static void adb_iop_start(void)
/* Now send it. The IOP manager will call adb_iop_complete */
/* when the packet has been sent. */
- iop_send_message(ADB_IOP, ADB_CHAN, req,
- sizeof(amsg), (__u8 *) &amsg, adb_iop_complete);
+ iop_send_message(ADB_IOP, ADB_CHAN, req, sizeof(amsg), (__u8 *)&amsg,
+ adb_iop_complete);
}
int adb_iop_probe(void)
{
- if (!iop_ism_present) return -ENODEV;
+ if (!iop_ism_present)
+ return -ENODEV;
return 0;
}
@@ -218,10 +221,12 @@ int adb_iop_send_request(struct adb_request *req, int sync)
int err;
err = adb_iop_write(req);
- if (err) return err;
+ if (err)
+ return err;
if (sync) {
- while (!req->complete) adb_iop_poll();
+ while (!req->complete)
+ adb_iop_poll();
}
return 0;
}
@@ -251,7 +256,9 @@ static int adb_iop_write(struct adb_request *req)
}
local_irq_restore(flags);
- if (adb_iop_state == idle) adb_iop_start();
+
+ if (adb_iop_state == idle)
+ adb_iop_start();
return 0;
}
@@ -263,7 +270,8 @@ int adb_iop_autopoll(int devs)
void adb_iop_poll(void)
{
- if (adb_iop_state == idle) adb_iop_start();
+ if (adb_iop_state == idle)
+ adb_iop_start();
iop_ism_irq_poll(ADB_IOP);
}
diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c
index a38f57ba50cb..ac824d7b2dcf 100644
--- a/drivers/macintosh/via-macii.c
+++ b/drivers/macintosh/via-macii.c
@@ -12,7 +12,7 @@
*
* 1999-08-02 (jmt) - Initial rewrite for Unified ADB.
* 2000-03-29 Tony Mantler <tonym@mac.linux-m68k.org>
- * - Big overhaul, should actually work now.
+ * - Big overhaul, should actually work now.
* 2006-12-31 Finn Thain - Another overhaul.
*
* Suggested reading:
@@ -23,7 +23,7 @@
* Apple's "ADB Analyzer" bus sniffer is invaluable:
* ftp://ftp.apple.com/developer/Tool_Chest/Devices_-_Hardware/Apple_Desktop_Bus/
*/
-
+
#include <stdarg.h>
#include <linux/types.h>
#include <linux/errno.h>
@@ -77,7 +77,7 @@ static volatile unsigned char *via;
#define ST_ODD 0x20 /* ADB state: odd data byte */
#define ST_IDLE 0x30 /* ADB state: idle, nothing to send */
-static int macii_init_via(void);
+static int macii_init_via(void);
static void macii_start(void);
static irqreturn_t macii_interrupt(int irq, void *arg);
static void macii_queue_poll(void);
@@ -123,7 +123,8 @@ static int autopoll_devs; /* bits set are device addresses to be polled */
/* Check for MacII style ADB */
static int macii_probe(void)
{
- if (macintosh_config->adb_type != MAC_ADB_II) return -ENODEV;
+ if (macintosh_config->adb_type != MAC_ADB_II)
+ return -ENODEV;
via = via1;
@@ -136,15 +137,17 @@ int macii_init(void)
{
unsigned long flags;
int err;
-
+
local_irq_save(flags);
-
+
err = macii_init_via();
- if (err) goto out;
+ if (err)
+ goto out;
err = request_irq(IRQ_MAC_ADB, macii_interrupt, 0, "ADB",
macii_interrupt);
- if (err) goto out;
+ if (err)
+ goto out;
macii_state = idle;
out:
@@ -152,7 +155,7 @@ out:
return err;
}
-/* initialize the hardware */
+/* initialize the hardware */
static int macii_init_via(void)
{
unsigned char x;
@@ -162,7 +165,7 @@ static int macii_init_via(void)
/* Set up state: idle */
via[B] |= ST_IDLE;
- last_status = via[B] & (ST_MASK|CTLR_IRQ);
+ last_status = via[B] & (ST_MASK | CTLR_IRQ);
/* Shift register on input */
via[ACR] = (via[ACR] & ~SR_CTRL) | SR_EXT;
@@ -188,7 +191,8 @@ static void macii_queue_poll(void)
int next_device;
static struct adb_request req;
- if (!autopoll_devs) return;
+ if (!autopoll_devs)
+ return;
device_mask = (1 << (((command_byte & 0xF0) >> 4) + 1)) - 1;
if (autopoll_devs & ~device_mask)
@@ -196,8 +200,7 @@ static void macii_queue_poll(void)
else
next_device = ffs(autopoll_devs) - 1;
- adb_request(&req, NULL, ADBREQ_NOSEND, 1,
- ADB_READREG(next_device, 0));
+ adb_request(&req, NULL, ADBREQ_NOSEND, 1, ADB_READREG(next_device, 0));
req.sent = 0;
req.complete = 0;
@@ -237,7 +240,7 @@ static int macii_write(struct adb_request *req)
req->complete = 1;
return -EINVAL;
}
-
+
req->next = NULL;
req->sent = 0;
req->complete = 0;
@@ -251,7 +254,8 @@ static int macii_write(struct adb_request *req)
} else {
current_req = req;
last_req = req;
- if (macii_state == idle) macii_start();
+ if (macii_state == idle)
+ macii_start();
}
local_irq_restore(flags);
@@ -269,7 +273,8 @@ static int macii_autopoll(int devs)
/* bit 1 == device 1, and so on. */
autopoll_devs = devs & 0xFFFE;
- if (!autopoll_devs) return 0;
+ if (!autopoll_devs)
+ return 0;
local_irq_save(flags);
@@ -286,7 +291,8 @@ static int macii_autopoll(int devs)
return err;
}
-static inline int need_autopoll(void) {
+static inline int need_autopoll(void)
+{
/* Was the last command Talk Reg 0
* and is the target on the autopoll list?
*/
@@ -306,7 +312,7 @@ static void macii_poll(void)
static int macii_reset_bus(void)
{
static struct adb_request req;
-
+
/* Command = 0, Address = ignored */
adb_request(&req, NULL, ADBREQ_NOSEND, 1, ADB_BUSRESET);
macii_send_request(&req, 1);
@@ -349,7 +355,7 @@ static void macii_start(void)
* to be activity on the ADB bus. The chip will poll to achieve this.
*
* The basic ADB state machine was left unchanged from the original MacII code
- * by Alan Cox, which was based on the CUDA driver for PowerMac.
+ * by Alan Cox, which was based on the CUDA driver for PowerMac.
* The syntax of the ADB status lines is totally different on MacII,
* though. MacII uses the states Command -> Even -> Odd -> Even ->...-> Idle
* for sending and Idle -> Even -> Odd -> Even ->...-> Idle for receiving.
@@ -377,147 +383,147 @@ static irqreturn_t macii_interrupt(int irq, void *arg)
}
last_status = status;
- status = via[B] & (ST_MASK|CTLR_IRQ);
+ status = via[B] & (ST_MASK | CTLR_IRQ);
switch (macii_state) {
- case idle:
- if (reading_reply) {
- reply_ptr = current_req->reply;
- } else {
- WARN_ON(current_req);
- reply_ptr = reply_buf;
- }
+ case idle:
+ if (reading_reply) {
+ reply_ptr = current_req->reply;
+ } else {
+ WARN_ON(current_req);
+ reply_ptr = reply_buf;
+ }
- x = via[SR];
+ x = via[SR];
- if ((status & CTLR_IRQ) && (x == 0xFF)) {
- /* Bus timeout without SRQ sequence:
- * data is "FF" while CTLR_IRQ is "H"
- */
- reply_len = 0;
- srq_asserted = 0;
- macii_state = read_done;
- } else {
- macii_state = reading;
- *reply_ptr = x;
- reply_len = 1;
- }
+ if ((status & CTLR_IRQ) && (x == 0xFF)) {
+ /* Bus timeout without SRQ sequence:
+ * data is "FF" while CTLR_IRQ is "H"
+ */
+ reply_len = 0;
+ srq_asserted = 0;
+ macii_state = read_done;
+ } else {
+ macii_state = reading;
+ *reply_ptr = x;
+ reply_len = 1;
+ }
- /* set ADB state = even for first data byte */
- via[B] = (via[B] & ~ST_MASK) | ST_EVEN;
- break;
+ /* set ADB state = even for first data byte */
+ via[B] = (via[B] & ~ST_MASK) | ST_EVEN;
+ break;
- case sending:
- req = current_req;
- if (data_index >= req->nbytes) {
- req->sent = 1;
- macii_state = idle;
-
- if (req->reply_expected) {
- reading_reply = 1;
- } else {
- req->complete = 1;
- current_req = req->next;
- if (req->done) (*req->done)(req);
-
- if (current_req)
- macii_start();
- else
- if (need_autopoll())
- macii_autopoll(autopoll_devs);
- }
+ case sending:
+ req = current_req;
+ if (data_index >= req->nbytes) {
+ req->sent = 1;
+ macii_state = idle;
- if (macii_state == idle) {
- /* reset to shift in */
- via[ACR] &= ~SR_OUT;
- x = via[SR];
- /* set ADB state idle - might get SRQ */
- via[B] = (via[B] & ~ST_MASK) | ST_IDLE;
- }
+ if (req->reply_expected) {
+ reading_reply = 1;
} else {
- via[SR] = req->data[data_index++];
-
- if ( (via[B] & ST_MASK) == ST_CMD ) {
- /* just sent the command byte, set to EVEN */
- via[B] = (via[B] & ~ST_MASK) | ST_EVEN;
- } else {
- /* invert state bits, toggle ODD/EVEN */
- via[B] ^= ST_MASK;
- }
- }
- break;
-
- case reading:
- x = via[SR];
- WARN_ON((status & ST_MASK) == ST_CMD ||
- (status & ST_MASK) == ST_IDLE);
-
- /* Bus timeout with SRQ sequence:
- * data is "XX FF" while CTLR_IRQ is "L L"
- * End of packet without SRQ sequence:
- * data is "XX...YY 00" while CTLR_IRQ is "L...H L"
- * End of packet SRQ sequence:
- * data is "XX...YY 00" while CTLR_IRQ is "L...L L"
- * (where XX is the first response byte and
- * YY is the last byte of valid response data.)
- */
+ req->complete = 1;
+ current_req = req->next;
+ if (req->done)
+ (*req->done)(req);
- srq_asserted = 0;
- if (!(status & CTLR_IRQ)) {
- if (x == 0xFF) {
- if (!(last_status & CTLR_IRQ)) {
- macii_state = read_done;
- reply_len = 0;
- srq_asserted = 1;
- }
- } else if (x == 0x00) {
- macii_state = read_done;
- if (!(last_status & CTLR_IRQ))
- srq_asserted = 1;
- }
+ if (current_req)
+ macii_start();
+ else if (need_autopoll())
+ macii_autopoll(autopoll_devs);
}
- if (macii_state == reading &&
- reply_len < ARRAY_SIZE(reply_buf)) {
- reply_ptr++;
- *reply_ptr = x;
- reply_len++;
+ if (macii_state == idle) {
+ /* reset to shift in */
+ via[ACR] &= ~SR_OUT;
+ x = via[SR];
+ /* set ADB state idle - might get SRQ */
+ via[B] = (via[B] & ~ST_MASK) | ST_IDLE;
}
+ } else {
+ via[SR] = req->data[data_index++];
- /* invert state bits, toggle ODD/EVEN */
- via[B] ^= ST_MASK;
- break;
+ if ((via[B] & ST_MASK) == ST_CMD) {
+ /* just sent the command byte, set to EVEN */
+ via[B] = (via[B] & ~ST_MASK) | ST_EVEN;
+ } else {
+ /* invert state bits, toggle ODD/EVEN */
+ via[B] ^= ST_MASK;
+ }
+ }
+ break;
- case read_done:
- x = via[SR];
+ case reading:
+ x = via[SR];
+ WARN_ON((status & ST_MASK) == ST_CMD ||
+ (status & ST_MASK) == ST_IDLE);
+
+ /* Bus timeout with SRQ sequence:
+ * data is "XX FF" while CTLR_IRQ is "L L"
+ * End of packet without SRQ sequence:
+ * data is "XX...YY 00" while CTLR_IRQ is "L...H L"
+ * End of packet SRQ sequence:
+ * data is "XX...YY 00" while CTLR_IRQ is "L...L L"
+ * (where XX is the first response byte and
+ * YY is the last byte of valid response data.)
+ */
- if (reading_reply) {
- reading_reply = 0;
- req = current_req;
- req->reply_len = reply_len;
- req->complete = 1;
- current_req = req->next;
- if (req->done) (*req->done)(req);
- } else if (reply_len && autopoll_devs)
- adb_input(reply_buf, reply_len, 0);
+ srq_asserted = 0;
+ if (!(status & CTLR_IRQ)) {
+ if (x == 0xFF) {
+ if (!(last_status & CTLR_IRQ)) {
+ macii_state = read_done;
+ reply_len = 0;
+ srq_asserted = 1;
+ }
+ } else if (x == 0x00) {
+ macii_state = read_done;
+ if (!(last_status & CTLR_IRQ))
+ srq_asserted = 1;
+ }
+ }
- macii_state = idle;
+ if (macii_state == reading &&
+ reply_len < ARRAY_SIZE(reply_buf)) {
+ reply_ptr++;
+ *reply_ptr = x;
+ reply_len++;
+ }
- /* SRQ seen before, initiate poll now */
- if (srq_asserted)
- macii_queue_poll();
+ /* invert state bits, toggle ODD/EVEN */
+ via[B] ^= ST_MASK;
+ break;
- if (current_req)
- macii_start();
- else
- if (need_autopoll())
- macii_autopoll(autopoll_devs);
+ case read_done:
+ x = via[SR];
- if (macii_state == idle)
- via[B] = (via[B] & ~ST_MASK) | ST_IDLE;
- break;
+ if (reading_reply) {
+ reading_reply = 0;
+ req = current_req;
+ req->reply_len = reply_len;
+ req->complete = 1;
+ current_req = req->next;
+ if (req->done)
+ (*req->done)(req);
+ } else if (reply_len && autopoll_devs)
+ adb_input(reply_buf, reply_len, 0);
+
+ macii_state = idle;
+
+ /* SRQ seen before, initiate poll now */
+ if (srq_asserted)
+ macii_queue_poll();
+
+ if (current_req)
+ macii_start();
+ else if (need_autopoll())
+ macii_autopoll(autopoll_devs);
+
+ if (macii_state == idle)
+ via[B] = (via[B] & ~ST_MASK) | ST_IDLE;
+ break;
- default:
+ default:
break;
}