mailbox: Hi3660: Fixup mailbox state machine malfunction issue

Current mailbox driver of Hi3660 release the mailbox directly
before sending a new message which may cause last message lost
and next message sending doesn't take effect actually.

This patch fixs this issue by following the right progress below,
each time before sending a message, mailbox driver will check
whether the mailbox is in ready state, if last message has been
acknowledged, the mailbox driver will clear the ack state to turn
the mailbox to ready state again.

Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com>
Reviewed-and-tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

1 files changed, 10 insertions, 12 deletions

diff --git a/drivers/mailbox/hi3660-mailbox.c b/drivers/mailbox/hi3660-mailbox.c
index c3fd1f2b797f..f9aed5d8f9f1 100644
--- a/drivers/mailbox/hi3660-mailbox.c
+++ b/drivers/mailbox/hi3660-mailbox.c
@@ -38,6 +38,7 @@
 #define MBOX_AUTOMATIC_ACK		1
 
 #define MBOX_STATE_IDLE			BIT(4)
+#define MBOX_STATE_READY		BIT(5)
 #define MBOX_STATE_ACK			BIT(7)
 
 #define MBOX_MSG_LEN			8
@@ -91,8 +92,8 @@ static int hi3660_mbox_check_state(struct mbox_chan *chan)
 	unsigned long val;
 	unsigned int ret;
 
-	/* Mailbox is idle so directly bail out */
-	if (readl(base + MBOX_MODE_REG) & MBOX_STATE_IDLE)
+	/* Mailbox is ready to use */
+	if (readl(base + MBOX_MODE_REG) & MBOX_STATE_READY)
 		return 0;
 
 	/* Wait for acknowledge from remote */
@@ -103,9 +104,9 @@ static int hi3660_mbox_check_state(struct mbox_chan *chan)
 		return ret;
 	}
 
-	/* Ensure channel is released */
-	writel(0xffffffff, base + MBOX_IMASK_REG);
-	writel(BIT(mchan->ack_irq), base + MBOX_SRC_REG);
+	/* clear ack state, mailbox will get back to ready state */
+	writel(BIT(mchan->ack_irq), base + MBOX_ICLR_REG);
+
 	return 0;
 }
 
@@ -160,10 +161,6 @@ static int hi3660_mbox_startup(struct mbox_chan *chan)
 {
 	int ret;
 
-	ret = hi3660_mbox_check_state(chan);
-	if (ret)
-		return ret;
-
 	ret = hi3660_mbox_unlock(chan);
 	if (ret)
 		return ret;
@@ -183,10 +180,11 @@ static int hi3660_mbox_send_data(struct mbox_chan *chan, void *msg)
 	void __iomem *base = MBOX_BASE(mbox, ch);
 	u32 *buf = msg;
 	unsigned int i;
+	int ret;
 
-	/* Ensure channel is released */
-	writel_relaxed(0xffffffff, base + MBOX_IMASK_REG);
-	writel_relaxed(BIT(mchan->ack_irq), base + MBOX_SRC_REG);
+	ret = hi3660_mbox_check_state(chan);
+	if (ret)
+		return ret;
 
 	/* Clear mask for destination interrupt */
 	writel_relaxed(~BIT(mchan->dst_irq), base + MBOX_IMASK_REG);