License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

17 files changed, 17 insertions, 0 deletions

diff --git a/drivers/media/common/b2c2/Makefile b/drivers/media/common/b2c2/Makefile
index 24993a5b38ba..73df4a334eda 100644
--- a/drivers/media/common/b2c2/Makefile
+++ b/drivers/media/common/b2c2/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 b2c2-flexcop-objs += flexcop.o flexcop-fe-tuner.o flexcop-i2c.o
 b2c2-flexcop-objs += flexcop-sram.o flexcop-eeprom.o flexcop-misc.o
 b2c2-flexcop-objs += flexcop-hw-filter.o
diff --git a/drivers/media/common/b2c2/flexcop-common.h b/drivers/media/common/b2c2/flexcop-common.h
index 2533574c0cf4..b7e5e4c17acb 100644
--- a/drivers/media/common/b2c2/flexcop-common.h
+++ b/drivers/media/common/b2c2/flexcop-common.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * flexcop-common.h - common header file for device-specific source files
diff --git a/drivers/media/common/b2c2/flexcop-eeprom.c b/drivers/media/common/b2c2/flexcop-eeprom.c
index 844c7836c2a6..0f2151cd36f2 100644
--- a/drivers/media/common/b2c2/flexcop-eeprom.c
+++ b/drivers/media/common/b2c2/flexcop-eeprom.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading)
diff --git a/drivers/media/common/b2c2/flexcop-fe-tuner.c b/drivers/media/common/b2c2/flexcop-fe-tuner.c
index 7636606f0be5..a1ce3e8eb1d3 100644
--- a/drivers/media/common/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/common/b2c2/flexcop-fe-tuner.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * flexcop-fe-tuner.c - methods for frontend attachment and DiSEqC controlling
diff --git a/drivers/media/common/b2c2/flexcop-hw-filter.c b/drivers/media/common/b2c2/flexcop-hw-filter.c
index 8220257903ef..335f30a54ba8 100644
--- a/drivers/media/common/b2c2/flexcop-hw-filter.c
+++ b/drivers/media/common/b2c2/flexcop-hw-filter.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * flexcop-hw-filter.c - pid and mac address filtering and control functions
diff --git a/drivers/media/common/b2c2/flexcop-i2c.c b/drivers/media/common/b2c2/flexcop-i2c.c
index 58d39a59fc09..564da6fa900d 100644
--- a/drivers/media/common/b2c2/flexcop-i2c.c
+++ b/drivers/media/common/b2c2/flexcop-i2c.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization
diff --git a/drivers/media/common/b2c2/flexcop-misc.c b/drivers/media/common/b2c2/flexcop-misc.c
index bb0d95fe64f9..83d01d3a81cc 100644
--- a/drivers/media/common/b2c2/flexcop-misc.c
+++ b/drivers/media/common/b2c2/flexcop-misc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * flexcop-misc.c - miscellaneous functions
diff --git a/drivers/media/common/b2c2/flexcop-reg.h b/drivers/media/common/b2c2/flexcop-reg.h
index 835c54d60e74..dd7c962db565 100644
--- a/drivers/media/common/b2c2/flexcop-reg.h
+++ b/drivers/media/common/b2c2/flexcop-reg.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * flexcop-reg.h - register abstraction for FlexCopII, FlexCopIIb and FlexCopIII
diff --git a/drivers/media/common/b2c2/flexcop-sram.c b/drivers/media/common/b2c2/flexcop-sram.c
index 185c285f70fc..d97962eb0112 100644
--- a/drivers/media/common/b2c2/flexcop-sram.c
+++ b/drivers/media/common/b2c2/flexcop-sram.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * flexcop-sram.c - functions for controlling the SRAM
diff --git a/drivers/media/common/b2c2/flexcop.h b/drivers/media/common/b2c2/flexcop.h
index 8942bdacbf61..911ece59ea02 100644
--- a/drivers/media/common/b2c2/flexcop.h
+++ b/drivers/media/common/b2c2/flexcop.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * flexcop.h - private header file for all flexcop-chip-source files
diff --git a/drivers/media/common/b2c2/flexcop_ibi_value_be.h b/drivers/media/common/b2c2/flexcop_ibi_value_be.h
index 8f64bdbd72bb..c97a0d6d7b3a 100644
--- a/drivers/media/common/b2c2/flexcop_ibi_value_be.h
+++ b/drivers/media/common/b2c2/flexcop_ibi_value_be.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * register descriptions
  * see flexcop.c for copyright information
diff --git a/drivers/media/common/b2c2/flexcop_ibi_value_le.h b/drivers/media/common/b2c2/flexcop_ibi_value_le.h
index c75830d7d942..5db3b46f21ee 100644
--- a/drivers/media/common/b2c2/flexcop_ibi_value_le.h
+++ b/drivers/media/common/b2c2/flexcop_ibi_value_le.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * register descriptions
  * see flexcop.c for copyright information
diff --git a/drivers/media/common/btcx-risc.h b/drivers/media/common/btcx-risc.h
index 03583ef90506..76dc16f402b9 100644
--- a/drivers/media/common/btcx-risc.h
+++ b/drivers/media/common/btcx-risc.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  */
 struct btcx_riscmem {
diff --git a/drivers/media/common/cypress_firmware.h b/drivers/media/common/cypress_firmware.h
index 1e4f27356205..0aa46e602b07 100644
--- a/drivers/media/common/cypress_firmware.h
+++ b/drivers/media/common/cypress_firmware.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
  * see dvb-usb-init.c for copyright information.
diff --git a/drivers/media/common/saa7146/saa7146_i2c.c b/drivers/media/common/saa7146/saa7146_i2c.c
index 75897f95e4b4..f9e099d812c8 100644
--- a/drivers/media/common/saa7146/saa7146_i2c.c
+++ b/drivers/media/common/saa7146/saa7146_i2c.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <media/drv-intf/saa7146_vv.h>
diff --git a/drivers/media/common/saa7146/saa7146_vbi.c b/drivers/media/common/saa7146/saa7146_vbi.c
index d79e4d7ecd9f..371c6f8606de 100644
--- a/drivers/media/common/saa7146/saa7146_vbi.c
+++ b/drivers/media/common/saa7146/saa7146_vbi.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include <media/drv-intf/saa7146_vv.h>
 
 static int vbi_pixel_to_capture = 720 * 2;
diff --git a/drivers/media/common/siano/Makefile b/drivers/media/common/siano/Makefile
index 4c0567f106b2..88e2b7ffc537 100644
--- a/drivers/media/common/siano/Makefile
+++ b/drivers/media/common/siano/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o
 smsdvb-objs := smsdvb-main.o