Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (707 commits)
  V4L/DVB (11316): saa7191: tuner ops wasn't set.
  V4L/DVB (11315): cx25840: fix 'unused variable' warning.
  V4L/DVB (11314): au8522: remove unused I2C_DRIVERID
  V4L/DVB (11313): v4l2-subdev: add enum_framesizes and enum_frameintervals.
  V4L/DVB (11312): tuner: remove V4L1 code from this driver.
  V4L/DVB (11311): v4l: replace 'ioctl' references in v4l i2c drivers
  V4L/DVB (11310): cx18: remove intermediate 'ioctl' step
  V4L/DVB (11309): cx25840: cleanup: remove intermediate 'ioctl' step
  V4L/DVB (11308): msp3400: use the V4L2 header since no V4L1 code is there
  V4L/DVB (11305): cx88: prevent probing rtc and ir devices
  V4L/DVB (11304): v4l2: remove v4l2_subdev_command calls where they are no longer needed.
  V4L/DVB (11303): tda7432: remove legacy code for old-style i2c API
  V4L/DVB (11302): tda9875: remove legacy code for old-style i2c API
  V4L/DVB (11301): wm8775: remove legacy code for old-style i2c API
  V4L/DVB (11300): cx88: convert to v4l2_subdev.
  V4L/DVB (11298): cx25840: remove legacy code for old-style i2c API
  V4L/DVB (11297): cx23885: convert to v4l2_subdev.
  V4L/DVB (11296): cx23885: bugfix error message if firmware is not found
  V4L/DVB (11295): cx23885: convert to v4l2_device.
  V4L/DVB (11293): uvcvideo: Add zero fill for VIDIOC_ENUM_FMT
  ...

1 files changed, 28 insertions, 6 deletions

diff --git a/drivers/media/dvb/frontends/lnbp21.h b/drivers/media/dvb/frontends/lnbp21.h
index 8fe094bd9689..fcdf1c650dde 100644
--- a/drivers/media/dvb/frontends/lnbp21.h
+++ b/drivers/media/dvb/frontends/lnbp21.h
@@ -28,26 +28,48 @@
 #define _LNBP21_H
 
 /* system register bits */
+/* [RO] 0=OK; 1=over current limit flag */
 #define LNBP21_OLF	0x01
+/* [RO] 0=OK; 1=over temperature flag (150 C) */
 #define LNBP21_OTF	0x02
+/* [RW] 0=disable LNB power, enable loopthrough
+	1=enable LNB power, disable loopthrough */
 #define LNBP21_EN	0x04
+/* [RW] 0=low voltage (13/14V, vert pol)
+	1=high voltage (18/19V,horiz pol) */
 #define LNBP21_VSEL	0x08
+/* [RW] increase LNB voltage by 1V:
+	0=13/18V; 1=14/19V */
 #define LNBP21_LLC	0x10
+/* [RW] 0=tone controlled by DSQIN pin
+	1=tone enable, disable DSQIN */
 #define LNBP21_TEN	0x20
+/* [RW] current limit select:
+	0:Iout=500-650mA Isc=300mA
+	1:Iout=400-550mA Isc=200mA */
 #define LNBP21_ISEL	0x40
+/* [RW] short-circuit protect:
+	0=pulsed (dynamic) curr limiting
+	1=static curr limiting */
 #define LNBP21_PCL	0x80
 
 #include <linux/dvb/frontend.h>
 
-#if defined(CONFIG_DVB_LNBP21) || (defined(CONFIG_DVB_LNBP21_MODULE) && defined(MODULE))
-/* override_set and override_clear control which system register bits (above) to always set & clear */
-extern struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear);
+#if defined(CONFIG_DVB_LNBP21) || (defined(CONFIG_DVB_LNBP21_MODULE) \
+							&& defined(MODULE))
+/* override_set and override_clear control which
+ system register bits (above) to always set & clear */
+extern struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe,
+				struct i2c_adapter *i2c, u8 override_set,
+				u8 override_clear);
 #else
-static inline struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear)
+static inline struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe,
+				struct i2c_adapter *i2c, u8 override_set,
+				u8 override_clear)
 {
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
 }
-#endif // CONFIG_DVB_LNBP21
+#endif
 
-#endif // _LNBP21_H
+#endif