[media] Rename media/dvb as media/pci

The remaining dvb drivers are pci, so rename them to match the
bus.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 1640 deletions

diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
deleted file mode 100644
index 12ddb53c58dc..000000000000
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ /dev/null
@@ -1,1640 +0,0 @@
-/*
- * budget-av.c: driver for the SAA7146 based Budget DVB cards
- *              with analog video in
- *
- * Compiled from various sources by Michael Hunold <michael@mihu.de>
- *
- * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
- *                               Andrew de Quincey <adq_dvb@lidskialf.net>
- *
- * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
- *
- * Copyright (C) 1999-2002 Ralph  Metzler
- *                       & Marcus Metzler for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org/ 
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include "budget.h"
-#include "stv0299.h"
-#include "stb0899_drv.h"
-#include "stb0899_reg.h"
-#include "stb0899_cfg.h"
-#include "tda8261.h"
-#include "tda8261_cfg.h"
-#include "tda1002x.h"
-#include "tda1004x.h"
-#include "tua6100.h"
-#include "dvb-pll.h"
-#include <media/saa7146_vv.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/spinlock.h>
-
-#include "dvb_ca_en50221.h"
-
-#define DEBICICAM		0x02420000
-
-#define SLOTSTATUS_NONE         1
-#define SLOTSTATUS_PRESENT      2
-#define SLOTSTATUS_RESET        4
-#define SLOTSTATUS_READY        8
-#define SLOTSTATUS_OCCUPIED     (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-struct budget_av {
-	struct budget budget;
-	struct video_device *vd;
-	int cur_input;
-	int has_saa7113;
-	struct tasklet_struct ciintf_irq_tasklet;
-	int slot_status;
-	struct dvb_ca_en50221 ca;
-	u8 reinitialise_demod:1;
-};
-
-static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot);
-
-
-/* GPIO Connections:
- * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*!
- * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory
- * 2 - CI Card Enable (Active Low)
- * 3 - CI Card Detect
- */
-
-/****************************************************************************
- * INITIALIZATION
- ****************************************************************************/
-
-static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg)
-{
-	u8 mm1[] = { 0x00 };
-	u8 mm2[] = { 0x00 };
-	struct i2c_msg msgs[2];
-
-	msgs[0].flags = 0;
-	msgs[1].flags = I2C_M_RD;
-	msgs[0].addr = msgs[1].addr = id / 2;
-	mm1[0] = reg;
-	msgs[0].len = 1;
-	msgs[1].len = 1;
-	msgs[0].buf = mm1;
-	msgs[1].buf = mm2;
-
-	i2c_transfer(i2c, msgs, 2);
-
-	return mm2[0];
-}
-
-static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len)
-{
-	u8 mm1[] = { reg };
-	struct i2c_msg msgs[2] = {
-		{.addr = id / 2,.flags = 0,.buf = mm1,.len = 1},
-		{.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len}
-	};
-
-	if (i2c_transfer(i2c, msgs, 2) != 2)
-		return -EIO;
-
-	return 0;
-}
-
-static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val)
-{
-	u8 msg[2] = { reg, val };
-	struct i2c_msg msgs;
-
-	msgs.flags = 0;
-	msgs.addr = id / 2;
-	msgs.len = 2;
-	msgs.buf = msg;
-	return i2c_transfer(i2c, &msgs, 1);
-}
-
-static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	int result;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
-	udelay(1);
-
-	result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1);
-	if (result == -ETIMEDOUT) {
-		ciintf_slot_shutdown(ca, slot);
-		pr_info("cam ejected 1\n");
-	}
-	return result;
-}
-
-static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	int result;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
-	udelay(1);
-
-	result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1);
-	if (result == -ETIMEDOUT) {
-		ciintf_slot_shutdown(ca, slot);
-		pr_info("cam ejected 2\n");
-	}
-	return result;
-}
-
-static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	int result;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
-	udelay(1);
-
-	result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
-	if (result == -ETIMEDOUT) {
-		ciintf_slot_shutdown(ca, slot);
-		pr_info("cam ejected 3\n");
-		return -ETIMEDOUT;
-	}
-	return result;
-}
-
-static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	int result;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
-	udelay(1);
-
-	result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
-	if (result == -ETIMEDOUT) {
-		ciintf_slot_shutdown(ca, slot);
-		pr_info("cam ejected 5\n");
-	}
-	return result;
-}
-
-static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	struct saa7146_dev *saa = budget_av->budget.dev;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	dprintk(1, "ciintf_slot_reset\n");
-	budget_av->slot_status = SLOTSTATUS_RESET;
-
-	saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
-
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
-	msleep(2);
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */
-	msleep(20); /* 20 ms Vcc settling time */
-
-	saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
-	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
-	msleep(20);
-
-	/* reinitialise the frontend if necessary */
-	if (budget_av->reinitialise_demod)
-		dvb_frontend_reinitialise(budget_av->budget.dvb_frontend);
-
-	return 0;
-}
-
-static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	struct saa7146_dev *saa = budget_av->budget.dev;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	dprintk(1, "ciintf_slot_shutdown\n");
-
-	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
-	budget_av->slot_status = SLOTSTATUS_NONE;
-
-	return 0;
-}
-
-static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	struct saa7146_dev *saa = budget_av->budget.dev;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
-
-	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
-
-	return 0;
-}
-
-static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
-{
-	struct budget_av *budget_av = (struct budget_av *) ca->data;
-	struct saa7146_dev *saa = budget_av->budget.dev;
-	int result;
-
-	if (slot != 0)
-		return -EINVAL;
-
-	/* test the card detect line - needs to be done carefully
-	 * since it never goes high for some CAMs on this interface (e.g. topuptv) */
-	if (budget_av->slot_status == SLOTSTATUS_NONE) {
-		saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
-		udelay(1);
-		if (saa7146_read(saa, PSR) & MASK_06) {
-			if (budget_av->slot_status == SLOTSTATUS_NONE) {
-				budget_av->slot_status = SLOTSTATUS_PRESENT;
-				pr_info("cam inserted A\n");
-			}
-		}
-		saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
-	}
-
-	/* We also try and read from IO memory to work round the above detection bug. If
-	 * there is no CAM, we will get a timeout. Only done if there is no cam
-	 * present, since this test actually breaks some cams :(
-	 *
-	 * if the CI interface is not open, we also do the above test since we
-	 * don't care if the cam has problems - we'll be resetting it on open() anyway */
-	if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) {
-		saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
-		result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1);
-		if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) {
-			budget_av->slot_status = SLOTSTATUS_PRESENT;
-			pr_info("cam inserted B\n");
-		} else if (result < 0) {
-			if (budget_av->slot_status != SLOTSTATUS_NONE) {
-				ciintf_slot_shutdown(ca, slot);
-				pr_info("cam ejected 5\n");
-				return 0;
-			}
-		}
-	}
-
-	/* read from attribute memory in reset/ready state to know when the CAM is ready */
-	if (budget_av->slot_status == SLOTSTATUS_RESET) {
-		result = ciintf_read_attribute_mem(ca, slot, 0);
-		if (result == 0x1d) {
-			budget_av->slot_status = SLOTSTATUS_READY;
-		}
-	}
-
-	/* work out correct return code */
-	if (budget_av->slot_status != SLOTSTATUS_NONE) {
-		if (budget_av->slot_status & SLOTSTATUS_READY) {
-			return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
-		}
-		return DVB_CA_EN50221_POLL_CAM_PRESENT;
-	}
-	return 0;
-}
-
-static int ciintf_init(struct budget_av *budget_av)
-{
-	struct saa7146_dev *saa = budget_av->budget.dev;
-	int result;
-
-	memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
-
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
-	saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
-	saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
-	saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
-
-	/* Enable DEBI pins */
-	saa7146_write(saa, MC1, MASK_27 | MASK_11);
-
-	/* register CI interface */
-	budget_av->ca.owner = THIS_MODULE;
-	budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem;
-	budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem;
-	budget_av->ca.read_cam_control = ciintf_read_cam_control;
-	budget_av->ca.write_cam_control = ciintf_write_cam_control;
-	budget_av->ca.slot_reset = ciintf_slot_reset;
-	budget_av->ca.slot_shutdown = ciintf_slot_shutdown;
-	budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
-	budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
-	budget_av->ca.data = budget_av;
-	budget_av->budget.ci_present = 1;
-	budget_av->slot_status = SLOTSTATUS_NONE;
-
-	if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
-					  &budget_av->ca, 0, 1)) != 0) {
-		pr_err("ci initialisation failed\n");
-		goto error;
-	}
-
-	pr_info("ci interface initialised\n");
-	return 0;
-
-error:
-	saa7146_write(saa, MC1, MASK_27);
-	return result;
-}
-
-static void ciintf_deinit(struct budget_av *budget_av)
-{
-	struct saa7146_dev *saa = budget_av->budget.dev;
-
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
-	saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
-	saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
-	saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
-
-	/* release the CA device */
-	dvb_ca_en50221_release(&budget_av->ca);
-
-	/* disable DEBI pins */
-	saa7146_write(saa, MC1, MASK_27);
-}
-
-
-static const u8 saa7113_tab[] = {
-	0x01, 0x08,
-	0x02, 0xc0,
-	0x03, 0x33,
-	0x04, 0x00,
-	0x05, 0x00,
-	0x06, 0xeb,
-	0x07, 0xe0,
-	0x08, 0x28,
-	0x09, 0x00,
-	0x0a, 0x80,
-	0x0b, 0x47,
-	0x0c, 0x40,
-	0x0d, 0x00,
-	0x0e, 0x01,
-	0x0f, 0x44,
-
-	0x10, 0x08,
-	0x11, 0x0c,
-	0x12, 0x7b,
-	0x13, 0x00,
-	0x15, 0x00, 0x16, 0x00, 0x17, 0x00,
-
-	0x57, 0xff,
-	0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07,
-	0x5b, 0x83, 0x5e, 0x00,
-	0xff
-};
-
-static int saa7113_init(struct budget_av *budget_av)
-{
-	struct budget *budget = &budget_av->budget;
-	struct saa7146_dev *saa = budget->dev;
-	const u8 *data = saa7113_tab;
-
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
-	msleep(200);
-
-	if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
-		dprintk(1, "saa7113 not found on KNC card\n");
-		return -ENODEV;
-	}
-
-	dprintk(1, "saa7113 detected and initializing\n");
-
-	while (*data != 0xff) {
-		i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1));
-		data += 2;
-	}
-
-	dprintk(1, "saa7113  status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f));
-
-	return 0;
-}
-
-static int saa7113_setinput(struct budget_av *budget_av, int input)
-{
-	struct budget *budget = &budget_av->budget;
-
-	if (1 != budget_av->has_saa7113)
-		return -ENODEV;
-
-	if (input == 1) {
-		i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7);
-		i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80);
-	} else if (input == 0) {
-		i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0);
-		i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00);
-	} else
-		return -EINVAL;
-
-	budget_av->cur_input = input;
-	return 0;
-}
-
-
-static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
-{
-	u8 aclk = 0;
-	u8 bclk = 0;
-	u8 m1;
-
-	aclk = 0xb5;
-	if (srate < 2000000)
-		bclk = 0x86;
-	else if (srate < 5000000)
-		bclk = 0x89;
-	else if (srate < 15000000)
-		bclk = 0x8f;
-	else if (srate < 45000000)
-		bclk = 0x95;
-
-	m1 = 0x14;
-	if (srate < 4000000)
-		m1 = 0x10;
-
-	stv0299_writereg(fe, 0x13, aclk);
-	stv0299_writereg(fe, 0x14, bclk);
-	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
-	stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
-	stv0299_writereg(fe, 0x0f, 0x80 | m1);
-
-	return 0;
-}
-
-static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	u32 div;
-	u8 buf[4];
-	struct budget *budget = (struct budget *) fe->dvb->priv;
-	struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
-
-	if ((c->frequency < 950000) || (c->frequency > 2150000))
-		return -EINVAL;
-
-	div = (c->frequency + (125 - 1)) / 125;	/* round correctly */
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
-	buf[3] = 0x20;
-
-	if (c->symbol_rate < 4000000)
-		buf[3] |= 1;
-
-	if (c->frequency < 1250000)
-		buf[3] |= 0;
-	else if (c->frequency < 1550000)
-		buf[3] |= 0x40;
-	else if (c->frequency < 2050000)
-		buf[3] |= 0x80;
-	else if (c->frequency < 2150000)
-		buf[3] |= 0xC0;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
-static u8 typhoon_cinergy1200s_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x30,
-	0x03, 0x00,
-	0x04, 0x7d,		/* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
-	0x05, 0x35,		/* I2CT = 0, SCLT = 1, SDAT = 1 */
-	0x06, 0x40,		/* DAC not used, set to high impendance mode */
-	0x07, 0x00,		/* DAC LSB */
-	0x08, 0x40,		/* DiSEqC off */
-	0x09, 0x00,		/* FIFO */
-	0x0c, 0x51,		/* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
-	0x0d, 0x82,		/* DC offset compensation = ON, beta_agc1 = 2 */
-	0x0e, 0x23,		/* alpha_tmg = 2, beta_tmg = 3 */
-	0x10, 0x3f,		// AGC2  0x3d
-	0x11, 0x84,
-	0x12, 0xb9,
-	0x15, 0xc9,		// lock detector threshold
-	0x16, 0x00,
-	0x17, 0x00,
-	0x18, 0x00,
-	0x19, 0x00,
-	0x1a, 0x00,
-	0x1f, 0x50,
-	0x20, 0x00,
-	0x21, 0x00,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x28, 0x00,		// out imp: normal  out type: parallel FEC mode:0
-	0x29, 0x1e,		// 1/2 threshold
-	0x2a, 0x14,		// 2/3 threshold
-	0x2b, 0x0f,		// 3/4 threshold
-	0x2c, 0x09,		// 5/6 threshold
-	0x2d, 0x05,		// 7/8 threshold
-	0x2e, 0x01,
-	0x31, 0x1f,		// test all FECs
-	0x32, 0x19,		// viterbi and synchro search
-	0x33, 0xfc,		// rs control
-	0x34, 0x93,		// error control
-	0x0f, 0x92,
-	0xff, 0xff
-};
-
-static struct stv0299_config typhoon_config = {
-	.demod_address = 0x68,
-	.inittab = typhoon_cinergy1200s_inittab,
-	.mclk = 88000000UL,
-	.invert = 0,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_1,
-	.volt13_op0_op1 = STV0299_VOLT13_OP0,
-	.min_delay_ms = 100,
-	.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
-};
-
-
-static struct stv0299_config cinergy_1200s_config = {
-	.demod_address = 0x68,
-	.inittab = typhoon_cinergy1200s_inittab,
-	.mclk = 88000000UL,
-	.invert = 0,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_0,
-	.volt13_op0_op1 = STV0299_VOLT13_OP0,
-	.min_delay_ms = 100,
-	.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
-};
-
-static struct stv0299_config cinergy_1200s_1894_0010_config = {
-	.demod_address = 0x68,
-	.inittab = typhoon_cinergy1200s_inittab,
-	.mclk = 88000000UL,
-	.invert = 1,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_1,
-	.volt13_op0_op1 = STV0299_VOLT13_OP0,
-	.min_delay_ms = 100,
-	.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
-};
-
-static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct budget *budget = (struct budget *) fe->dvb->priv;
-	u8 buf[6];
-	struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
-	int i;
-
-#define CU1216_IF 36125000
-#define TUNER_MUL 62500
-
-	u32 div = (c->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0xce;
-	buf[3] = (c->frequency < 150000000 ? 0x01 :
-		  c->frequency < 445000000 ? 0x02 : 0x04);
-	buf[4] = 0xde;
-	buf[5] = 0x20;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-
-	/* wait for the pll lock */
-	msg.flags = I2C_M_RD;
-	msg.len = 1;
-	for (i = 0; i < 20; i++) {
-		if (fe->ops.i2c_gate_ctrl)
-			fe->ops.i2c_gate_ctrl(fe, 1);
-		if (i2c_transfer(&budget->i2c_adap, &msg, 1) == 1 && (buf[0] & 0x40))
-			break;
-		msleep(10);
-	}
-
-	/* switch the charge pump to the lower current */
-	msg.flags = 0;
-	msg.len = 2;
-	msg.buf = &buf[2];
-	buf[2] &= ~0x40;
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-
-	return 0;
-}
-
-static struct tda1002x_config philips_cu1216_config = {
-	.demod_address = 0x0c,
-	.invert = 1,
-};
-
-static struct tda1002x_config philips_cu1216_config_altaddress = {
-	.demod_address = 0x0d,
-	.invert = 0,
-};
-
-static struct tda10023_config philips_cu1216_tda10023_config = {
-	.demod_address = 0x0c,
-	.invert = 1,
-};
-
-static int philips_tu1216_tuner_init(struct dvb_frontend *fe)
-{
-	struct budget *budget = (struct budget *) fe->dvb->priv;
-	static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
-	struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
-
-	// setup PLL configuration
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
-		return -EIO;
-	msleep(1);
-
-	return 0;
-}
-
-static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct budget *budget = (struct budget *) fe->dvb->priv;
-	u8 tuner_buf[4];
-	struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len =
-			sizeof(tuner_buf) };
-	int tuner_frequency = 0;
-	u8 band, cp, filter;
-
-	// determine charge pump
-	tuner_frequency = c->frequency + 36166000;
-	if (tuner_frequency < 87000000)
-		return -EINVAL;
-	else if (tuner_frequency < 130000000)
-		cp = 3;
-	else if (tuner_frequency < 160000000)
-		cp = 5;
-	else if (tuner_frequency < 200000000)
-		cp = 6;
-	else if (tuner_frequency < 290000000)
-		cp = 3;
-	else if (tuner_frequency < 420000000)
-		cp = 5;
-	else if (tuner_frequency < 480000000)
-		cp = 6;
-	else if (tuner_frequency < 620000000)
-		cp = 3;
-	else if (tuner_frequency < 830000000)
-		cp = 5;
-	else if (tuner_frequency < 895000000)
-		cp = 7;
-	else
-		return -EINVAL;
-
-	// determine band
-	if (c->frequency < 49000000)
-		return -EINVAL;
-	else if (c->frequency < 161000000)
-		band = 1;
-	else if (c->frequency < 444000000)
-		band = 2;
-	else if (c->frequency < 861000000)
-		band = 4;
-	else
-		return -EINVAL;
-
-	// setup PLL filter
-	switch (c->bandwidth_hz) {
-	case 6000000:
-		filter = 0;
-		break;
-
-	case 7000000:
-		filter = 0;
-		break;
-
-	case 8000000:
-		filter = 1;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	// calculate divisor
-	// ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
-	tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000;
-
-	// setup tuner buffer
-	tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
-	tuner_buf[1] = tuner_frequency & 0xff;
-	tuner_buf[2] = 0xca;
-	tuner_buf[3] = (cp << 5) | (filter << 3) | band;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
-		return -EIO;
-
-	msleep(1);
-	return 0;
-}
-
-static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
-					   const struct firmware **fw, char *name)
-{
-	struct budget *budget = (struct budget *) fe->dvb->priv;
-
-	return request_firmware(fw, name, &budget->dev->pci->dev);
-}
-
-static struct tda1004x_config philips_tu1216_config = {
-
-	.demod_address = 0x8,
-	.invert = 1,
-	.invert_oclk = 1,
-	.xtal_freq = TDA10046_XTAL_4M,
-	.agc_config = TDA10046_AGC_DEFAULT,
-	.if_freq = TDA10046_FREQ_3617,
-	.request_firmware = philips_tu1216_request_firmware,
-};
-
-static u8 philips_sd1878_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x30,
-	0x03, 0x00,
-	0x04, 0x7d,
-	0x05, 0x35,
-	0x06, 0x40,
-	0x07, 0x00,
-	0x08, 0x43,
-	0x09, 0x02,
-	0x0C, 0x51,
-	0x0D, 0x82,
-	0x0E, 0x23,
-	0x10, 0x3f,
-	0x11, 0x84,
-	0x12, 0xb9,
-	0x15, 0xc9,
-	0x16, 0x19,
-	0x17, 0x8c,
-	0x18, 0x59,
-	0x19, 0xf8,
-	0x1a, 0xfe,
-	0x1c, 0x7f,
-	0x1d, 0x00,
-	0x1e, 0x00,
-	0x1f, 0x50,
-	0x20, 0x00,
-	0x21, 0x00,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x28, 0x00,
-	0x29, 0x28,
-	0x2a, 0x14,
-	0x2b, 0x0f,
-	0x2c, 0x09,
-	0x2d, 0x09,
-	0x31, 0x1f,
-	0x32, 0x19,
-	0x33, 0xfc,
-	0x34, 0x93,
-	0xff, 0xff
-};
-
-static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe,
-		u32 srate, u32 ratio)
-{
-	u8 aclk = 0;
-	u8 bclk = 0;
-	u8 m1;
-
-	aclk = 0xb5;
-	if (srate < 2000000)
-		bclk = 0x86;
-	else if (srate < 5000000)
-		bclk = 0x89;
-	else if (srate < 15000000)
-		bclk = 0x8f;
-	else if (srate < 45000000)
-		bclk = 0x95;
-
-	m1 = 0x14;
-	if (srate < 4000000)
-		m1 = 0x10;
-
-	stv0299_writereg(fe, 0x0e, 0x23);
-	stv0299_writereg(fe, 0x0f, 0x94);
-	stv0299_writereg(fe, 0x10, 0x39);
-	stv0299_writereg(fe, 0x13, aclk);
-	stv0299_writereg(fe, 0x14, bclk);
-	stv0299_writereg(fe, 0x15, 0xc9);
-	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
-	stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
-	stv0299_writereg(fe, 0x0f, 0x80 | m1);
-
-	return 0;
-}
-
-static struct stv0299_config philips_sd1878_config = {
-	.demod_address = 0x68,
-     .inittab = philips_sd1878_inittab,
-	.mclk = 88000000UL,
-	.invert = 0,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_1,
-	.volt13_op0_op1 = STV0299_VOLT13_OP0,
-	.min_delay_ms = 100,
-	.set_symbol_rate = philips_sd1878_ci_set_symbol_rate,
-};
-
-/* KNC1 DVB-S (STB0899) Inittab	*/
-static const struct stb0899_s1_reg knc1_stb0899_s1_init_1[] = {
-
-	{ STB0899_DEV_ID		, 0x81 },
-	{ STB0899_DISCNTRL1		, 0x32 },
-	{ STB0899_DISCNTRL2		, 0x80 },
-	{ STB0899_DISRX_ST0		, 0x04 },
-	{ STB0899_DISRX_ST1		, 0x00 },
-	{ STB0899_DISPARITY		, 0x00 },
-	{ STB0899_DISSTATUS		, 0x20 },
-	{ STB0899_DISF22		, 0x8c },
-	{ STB0899_DISF22RX		, 0x9a },
-	{ STB0899_SYSREG		, 0x0b },
-	{ STB0899_ACRPRESC		, 0x11 },
-	{ STB0899_ACRDIV1		, 0x0a },
-	{ STB0899_ACRDIV2		, 0x05 },
-	{ STB0899_DACR1			, 0x00 },
-	{ STB0899_DACR2			, 0x00 },
-	{ STB0899_OUTCFG		, 0x00 },
-	{ STB0899_MODECFG		, 0x00 },
-	{ STB0899_IRQSTATUS_3		, 0x30 },
-	{ STB0899_IRQSTATUS_2		, 0x00 },
-	{ STB0899_IRQSTATUS_1		, 0x00 },
-	{ STB0899_IRQSTATUS_0		, 0x00 },
-	{ STB0899_IRQMSK_3		, 0xf3 },
-	{ STB0899_IRQMSK_2		, 0xfc },
-	{ STB0899_IRQMSK_1		, 0xff },
-	{ STB0899_IRQMSK_0		, 0xff },
-	{ STB0899_IRQCFG		, 0x00 },
-	{ STB0899_I2CCFG		, 0x88 },
-	{ STB0899_I2CRPT		, 0x58 }, /* Repeater=8, Stop=disabled */
-	{ STB0899_IOPVALUE5		, 0x00 },
-	{ STB0899_IOPVALUE4		, 0x20 },
-	{ STB0899_IOPVALUE3		, 0xc9 },
-	{ STB0899_IOPVALUE2		, 0x90 },
-	{ STB0899_IOPVALUE1		, 0x40 },
-	{ STB0899_IOPVALUE0		, 0x00 },
-	{ STB0899_GPIO00CFG		, 0x82 },
-	{ STB0899_GPIO01CFG		, 0x82 },
-	{ STB0899_GPIO02CFG		, 0x82 },
-	{ STB0899_GPIO03CFG		, 0x82 },
-	{ STB0899_GPIO04CFG		, 0x82 },
-	{ STB0899_GPIO05CFG		, 0x82 },
-	{ STB0899_GPIO06CFG		, 0x82 },
-	{ STB0899_GPIO07CFG		, 0x82 },
-	{ STB0899_GPIO08CFG		, 0x82 },
-	{ STB0899_GPIO09CFG		, 0x82 },
-	{ STB0899_GPIO10CFG		, 0x82 },
-	{ STB0899_GPIO11CFG		, 0x82 },
-	{ STB0899_GPIO12CFG		, 0x82 },
-	{ STB0899_GPIO13CFG		, 0x82 },
-	{ STB0899_GPIO14CFG		, 0x82 },
-	{ STB0899_GPIO15CFG		, 0x82 },
-	{ STB0899_GPIO16CFG		, 0x82 },
-	{ STB0899_GPIO17CFG		, 0x82 },
-	{ STB0899_GPIO18CFG		, 0x82 },
-	{ STB0899_GPIO19CFG		, 0x82 },
-	{ STB0899_GPIO20CFG		, 0x82 },
-	{ STB0899_SDATCFG		, 0xb8 },
-	{ STB0899_SCLTCFG		, 0xba },
-	{ STB0899_AGCRFCFG		, 0x08 }, /* 0x1c */
-	{ STB0899_GPIO22		, 0x82 }, /* AGCBB2CFG */
-	{ STB0899_GPIO21		, 0x91 }, /* AGCBB1CFG */
-	{ STB0899_DIRCLKCFG		, 0x82 },
-	{ STB0899_CLKOUT27CFG		, 0x7e },
-	{ STB0899_STDBYCFG		, 0x82 },
-	{ STB0899_CS0CFG		, 0x82 },
-	{ STB0899_CS1CFG		, 0x82 },
-	{ STB0899_DISEQCOCFG		, 0x20 },
-	{ STB0899_GPIO32CFG		, 0x82 },
-	{ STB0899_GPIO33CFG		, 0x82 },
-	{ STB0899_GPIO34CFG		, 0x82 },
-	{ STB0899_GPIO35CFG		, 0x82 },
-	{ STB0899_GPIO36CFG		, 0x82 },
-	{ STB0899_GPIO37CFG		, 0x82 },
-	{ STB0899_GPIO38CFG		, 0x82 },
-	{ STB0899_GPIO39CFG		, 0x82 },
-	{ STB0899_NCOARSE		, 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
-	{ STB0899_SYNTCTRL		, 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
-	{ STB0899_FILTCTRL		, 0x00 },
-	{ STB0899_SYSCTRL		, 0x00 },
-	{ STB0899_STOPCLK1		, 0x20 },
-	{ STB0899_STOPCLK2		, 0x00 },
-	{ STB0899_INTBUFSTATUS		, 0x00 },
-	{ STB0899_INTBUFCTRL		, 0x0a },
-	{ 0xffff			, 0xff },
-};
-
-static const struct stb0899_s1_reg knc1_stb0899_s1_init_3[] = {
-	{ STB0899_DEMOD			, 0x00 },
-	{ STB0899_RCOMPC		, 0xc9 },
-	{ STB0899_AGC1CN		, 0x41 },
-	{ STB0899_AGC1REF		, 0x08 },
-	{ STB0899_RTC			, 0x7a },
-	{ STB0899_TMGCFG		, 0x4e },
-	{ STB0899_AGC2REF		, 0x33 },
-	{ STB0899_TLSR			, 0x84 },
-	{ STB0899_CFD			, 0xee },
-	{ STB0899_ACLC			, 0x87 },
-	{ STB0899_BCLC			, 0x94 },
-	{ STB0899_EQON			, 0x41 },
-	{ STB0899_LDT			, 0xdd },
-	{ STB0899_LDT2			, 0xc9 },
-	{ STB0899_EQUALREF		, 0xb4 },
-	{ STB0899_TMGRAMP		, 0x10 },
-	{ STB0899_TMGTHD		, 0x30 },
-	{ STB0899_IDCCOMP		, 0xfb },
-	{ STB0899_QDCCOMP		, 0x03 },
-	{ STB0899_POWERI		, 0x3b },
-	{ STB0899_POWERQ		, 0x3d },
-	{ STB0899_RCOMP			, 0x81 },
-	{ STB0899_AGCIQIN		, 0x80 },
-	{ STB0899_AGC2I1		, 0x04 },
-	{ STB0899_AGC2I2		, 0xf5 },
-	{ STB0899_TLIR			, 0x25 },
-	{ STB0899_RTF			, 0x80 },
-	{ STB0899_DSTATUS		, 0x00 },
-	{ STB0899_LDI			, 0xca },
-	{ STB0899_CFRM			, 0xf1 },
-	{ STB0899_CFRL			, 0xf3 },
-	{ STB0899_NIRM			, 0x2a },
-	{ STB0899_NIRL			, 0x05 },
-	{ STB0899_ISYMB			, 0x17 },
-	{ STB0899_QSYMB			, 0xfa },
-	{ STB0899_SFRH			, 0x2f },
-	{ STB0899_SFRM			, 0x68 },
-	{ STB0899_SFRL			, 0x40 },
-	{ STB0899_SFRUPH		, 0x2f },
-	{ STB0899_SFRUPM		, 0x68 },
-	{ STB0899_SFRUPL		, 0x40 },
-	{ STB0899_EQUAI1		, 0xfd },
-	{ STB0899_EQUAQ1		, 0x04 },
-	{ STB0899_EQUAI2		, 0x0f },
-	{ STB0899_EQUAQ2		, 0xff },
-	{ STB0899_EQUAI3		, 0xdf },
-	{ STB0899_EQUAQ3		, 0xfa },
-	{ STB0899_EQUAI4		, 0x37 },
-	{ STB0899_EQUAQ4		, 0x0d },
-	{ STB0899_EQUAI5		, 0xbd },
-	{ STB0899_EQUAQ5		, 0xf7 },
-	{ STB0899_DSTATUS2		, 0x00 },
-	{ STB0899_VSTATUS		, 0x00 },
-	{ STB0899_VERROR		, 0xff },
-	{ STB0899_IQSWAP		, 0x2a },
-	{ STB0899_ECNT1M		, 0x00 },
-	{ STB0899_ECNT1L		, 0x00 },
-	{ STB0899_ECNT2M		, 0x00 },
-	{ STB0899_ECNT2L		, 0x00 },
-	{ STB0899_ECNT3M		, 0x00 },
-	{ STB0899_ECNT3L		, 0x00 },
-	{ STB0899_FECAUTO1		, 0x06 },
-	{ STB0899_FECM			, 0x01 },
-	{ STB0899_VTH12			, 0xf0 },
-	{ STB0899_VTH23			, 0xa0 },
-	{ STB0899_VTH34			, 0x78 },
-	{ STB0899_VTH56			, 0x4e },
-	{ STB0899_VTH67			, 0x48 },
-	{ STB0899_VTH78			, 0x38 },
-	{ STB0899_PRVIT			, 0xff },
-	{ STB0899_VITSYNC		, 0x19 },
-	{ STB0899_RSULC			, 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
-	{ STB0899_TSULC			, 0x42 },
-	{ STB0899_RSLLC			, 0x40 },
-	{ STB0899_TSLPL			, 0x12 },
-	{ STB0899_TSCFGH		, 0x0c },
-	{ STB0899_TSCFGM		, 0x00 },
-	{ STB0899_TSCFGL		, 0x0c },
-	{ STB0899_TSOUT			, 0x4d }, /* 0x0d for CAM */
-	{ STB0899_RSSYNCDEL		, 0x00 },
-	{ STB0899_TSINHDELH		, 0x02 },
-	{ STB0899_TSINHDELM		, 0x00 },
-	{ STB0899_TSINHDELL		, 0x00 },
-	{ STB0899_TSLLSTKM		, 0x00 },
-	{ STB0899_TSLLSTKL		, 0x00 },
-	{ STB0899_TSULSTKM		, 0x00 },
-	{ STB0899_TSULSTKL		, 0xab },
-	{ STB0899_PCKLENUL		, 0x00 },
-	{ STB0899_PCKLENLL		, 0xcc },
-	{ STB0899_RSPCKLEN		, 0xcc },
-	{ STB0899_TSSTATUS		, 0x80 },
-	{ STB0899_ERRCTRL1		, 0xb6 },
-	{ STB0899_ERRCTRL2		, 0x96 },
-	{ STB0899_ERRCTRL3		, 0x89 },
-	{ STB0899_DMONMSK1		, 0x27 },
-	{ STB0899_DMONMSK0		, 0x03 },
-	{ STB0899_DEMAPVIT		, 0x5c },
-	{ STB0899_PLPARM		, 0x1f },
-	{ STB0899_PDELCTRL		, 0x48 },
-	{ STB0899_PDELCTRL2		, 0x00 },
-	{ STB0899_BBHCTRL1		, 0x00 },
-	{ STB0899_BBHCTRL2		, 0x00 },
-	{ STB0899_HYSTTHRESH		, 0x77 },
-	{ STB0899_MATCSTM		, 0x00 },
-	{ STB0899_MATCSTL		, 0x00 },
-	{ STB0899_UPLCSTM		, 0x00 },
-	{ STB0899_UPLCSTL		, 0x00 },
-	{ STB0899_DFLCSTM		, 0x00 },
-	{ STB0899_DFLCSTL		, 0x00 },
-	{ STB0899_SYNCCST		, 0x00 },
-	{ STB0899_SYNCDCSTM		, 0x00 },
-	{ STB0899_SYNCDCSTL		, 0x00 },
-	{ STB0899_ISI_ENTRY		, 0x00 },
-	{ STB0899_ISI_BIT_EN		, 0x00 },
-	{ STB0899_MATSTRM		, 0x00 },
-	{ STB0899_MATSTRL		, 0x00 },
-	{ STB0899_UPLSTRM		, 0x00 },
-	{ STB0899_UPLSTRL		, 0x00 },
-	{ STB0899_DFLSTRM		, 0x00 },
-	{ STB0899_DFLSTRL		, 0x00 },
-	{ STB0899_SYNCSTR		, 0x00 },
-	{ STB0899_SYNCDSTRM		, 0x00 },
-	{ STB0899_SYNCDSTRL		, 0x00 },
-	{ STB0899_CFGPDELSTATUS1	, 0x10 },
-	{ STB0899_CFGPDELSTATUS2	, 0x00 },
-	{ STB0899_BBFERRORM		, 0x00 },
-	{ STB0899_BBFERRORL		, 0x00 },
-	{ STB0899_UPKTERRORM		, 0x00 },
-	{ STB0899_UPKTERRORL		, 0x00 },
-	{ 0xffff			, 0xff },
-};
-
-/* STB0899 demodulator config for the KNC1 and clones */
-static struct stb0899_config knc1_dvbs2_config = {
-	.init_dev		= knc1_stb0899_s1_init_1,
-	.init_s2_demod		= stb0899_s2_init_2,
-	.init_s1_demod		= knc1_stb0899_s1_init_3,
-	.init_s2_fec		= stb0899_s2_init_4,
-	.init_tst		= stb0899_s1_init_5,
-
-	.postproc		= NULL,
-
-	.demod_address		= 0x68,
-//	.ts_output_mode		= STB0899_OUT_PARALLEL,	/* types = SERIAL/PARALLEL	*/
-	.block_sync_mode	= STB0899_SYNC_FORCED,	/* DSS, SYNC_FORCED/UNSYNCED	*/
-//	.ts_pfbit_toggle	= STB0899_MPEG_NORMAL,	/* DirecTV, MPEG toggling seq	*/
-
-	.xtal_freq		= 27000000,
-	.inversion		= IQ_SWAP_OFF, /* 1 */
-
-	.lo_clk			= 76500000,
-	.hi_clk			= 90000000,
-
-	.esno_ave		= STB0899_DVBS2_ESNO_AVE,
-	.esno_quant		= STB0899_DVBS2_ESNO_QUANT,
-	.avframes_coarse	= STB0899_DVBS2_AVFRAMES_COARSE,
-	.avframes_fine		= STB0899_DVBS2_AVFRAMES_FINE,
-	.miss_threshold		= STB0899_DVBS2_MISS_THRESHOLD,
-	.uwp_threshold_acq	= STB0899_DVBS2_UWP_THRESHOLD_ACQ,
-	.uwp_threshold_track	= STB0899_DVBS2_UWP_THRESHOLD_TRACK,
-	.uwp_threshold_sof	= STB0899_DVBS2_UWP_THRESHOLD_SOF,
-	.sof_search_timeout	= STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
-
-	.btr_nco_bits		= STB0899_DVBS2_BTR_NCO_BITS,
-	.btr_gain_shift_offset	= STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
-	.crl_nco_bits		= STB0899_DVBS2_CRL_NCO_BITS,
-	.ldpc_max_iter		= STB0899_DVBS2_LDPC_MAX_ITER,
-
-	.tuner_get_frequency	= tda8261_get_frequency,
-	.tuner_set_frequency	= tda8261_set_frequency,
-	.tuner_set_bandwidth	= NULL,
-	.tuner_get_bandwidth	= tda8261_get_bandwidth,
-	.tuner_set_rfsiggain	= NULL
-};
-
-/*
- * SD1878/SHA tuner config
- * 1F, Single I/P, Horizontal mount, High Sensitivity
- */
-static const struct tda8261_config sd1878c_config = {
-//	.name		= "SD1878/SHA",
-	.addr		= 0x60,
-	.step_size	= TDA8261_STEP_1000 /* kHz */
-};
-
-static u8 read_pwm(struct budget_av *budget_av)
-{
-	u8 b = 0xff;
-	u8 pwm;
-	struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1},
-	{.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1}
-	};
-
-	if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2)
-	    || (pwm == 0xff))
-		pwm = 0x48;
-
-	return pwm;
-}
-
-#define SUBID_DVBS_KNC1			0x0010
-#define SUBID_DVBS_KNC1_PLUS		0x0011
-#define SUBID_DVBS_TYPHOON		0x4f56
-#define SUBID_DVBS_CINERGY1200		0x1154
-#define SUBID_DVBS_CYNERGY1200N 	0x1155
-#define SUBID_DVBS_TV_STAR		0x0014
-#define SUBID_DVBS_TV_STAR_PLUS_X4	0x0015
-#define SUBID_DVBS_TV_STAR_CI		0x0016
-#define SUBID_DVBS2_KNC1		0x0018
-#define SUBID_DVBS2_KNC1_OEM		0x0019
-#define SUBID_DVBS_EASYWATCH_1  	0x001a
-#define SUBID_DVBS_EASYWATCH_2  	0x001b
-#define SUBID_DVBS2_EASYWATCH		0x001d
-#define SUBID_DVBS_EASYWATCH		0x001e
-
-#define SUBID_DVBC_EASYWATCH		0x002a
-#define SUBID_DVBC_EASYWATCH_MK3	0x002c
-#define SUBID_DVBC_KNC1			0x0020
-#define SUBID_DVBC_KNC1_PLUS		0x0021
-#define SUBID_DVBC_KNC1_MK3		0x0022
-#define SUBID_DVBC_KNC1_TDA10024	0x0028
-#define SUBID_DVBC_KNC1_PLUS_MK3	0x0023
-#define SUBID_DVBC_CINERGY1200		0x1156
-#define SUBID_DVBC_CINERGY1200_MK3	0x1176
-
-#define SUBID_DVBT_EASYWATCH		0x003a
-#define SUBID_DVBT_KNC1_PLUS		0x0031
-#define SUBID_DVBT_KNC1			0x0030
-#define SUBID_DVBT_CINERGY1200		0x1157
-
-static void frontend_init(struct budget_av *budget_av)
-{
-	struct saa7146_dev * saa = budget_av->budget.dev;
-	struct dvb_frontend * fe = NULL;
-
-	/* Enable / PowerON Frontend */
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
-
-	/* Wait for PowerON */
-	msleep(100);
-
-	/* additional setup necessary for the PLUS cards */
-	switch (saa->pci->subsystem_device) {
-		case SUBID_DVBS_KNC1_PLUS:
-		case SUBID_DVBC_KNC1_PLUS:
-		case SUBID_DVBT_KNC1_PLUS:
-		case SUBID_DVBC_EASYWATCH:
-		case SUBID_DVBC_KNC1_PLUS_MK3:
-		case SUBID_DVBS2_KNC1:
-		case SUBID_DVBS2_KNC1_OEM:
-		case SUBID_DVBS2_EASYWATCH:
-			saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
-			break;
-	}
-
-	switch (saa->pci->subsystem_device) {
-
-	case SUBID_DVBS_KNC1:
-		/*
-		 * maybe that setting is needed for other dvb-s cards as well,
-		 * but so far it has been only confirmed for this type
-		 */
-		budget_av->reinitialise_demod = 1;
-		/* fall through */
-	case SUBID_DVBS_KNC1_PLUS:
-	case SUBID_DVBS_EASYWATCH_1:
-		if (saa->pci->subsystem_vendor == 0x1894) {
-			fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config,
-					     &budget_av->budget.i2c_adap);
-			if (fe) {
-				dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap);
-			}
-		} else {
-			fe = dvb_attach(stv0299_attach, &typhoon_config,
-					     &budget_av->budget.i2c_adap);
-			if (fe) {
-				fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
-			}
-		}
-		break;
-
-	case SUBID_DVBS_TV_STAR:
-	case SUBID_DVBS_TV_STAR_PLUS_X4:
-	case SUBID_DVBS_TV_STAR_CI:
-	case SUBID_DVBS_CYNERGY1200N:
-	case SUBID_DVBS_EASYWATCH:
-	case SUBID_DVBS_EASYWATCH_2:
-		fe = dvb_attach(stv0299_attach, &philips_sd1878_config,
-				&budget_av->budget.i2c_adap);
-		if (fe) {
-			dvb_attach(dvb_pll_attach, fe, 0x60,
-				   &budget_av->budget.i2c_adap,
-				   DVB_PLL_PHILIPS_SD1878_TDA8261);
-		}
-		break;
-
-	case SUBID_DVBS_TYPHOON:
-		fe = dvb_attach(stv0299_attach, &typhoon_config,
-				    &budget_av->budget.i2c_adap);
-		if (fe) {
-			fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
-		}
-		break;
-	case SUBID_DVBS2_KNC1:
-	case SUBID_DVBS2_KNC1_OEM:
-	case SUBID_DVBS2_EASYWATCH:
-		budget_av->reinitialise_demod = 1;
-		if ((fe = dvb_attach(stb0899_attach, &knc1_dvbs2_config, &budget_av->budget.i2c_adap)))
-			dvb_attach(tda8261_attach, fe, &sd1878c_config, &budget_av->budget.i2c_adap);
-
-		break;
-	case SUBID_DVBS_CINERGY1200:
-		fe = dvb_attach(stv0299_attach, &cinergy_1200s_config,
-				    &budget_av->budget.i2c_adap);
-		if (fe) {
-			fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
-		}
-		break;
-
-	case SUBID_DVBC_KNC1:
-	case SUBID_DVBC_KNC1_PLUS:
-	case SUBID_DVBC_CINERGY1200:
-	case SUBID_DVBC_EASYWATCH:
-		budget_av->reinitialise_demod = 1;
-		budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
-		fe = dvb_attach(tda10021_attach, &philips_cu1216_config,
-				     &budget_av->budget.i2c_adap,
-				     read_pwm(budget_av));
-		if (fe == NULL)
-			fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress,
-					     &budget_av->budget.i2c_adap,
-					     read_pwm(budget_av));
-		if (fe) {
-			fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
-		}
-		break;
-
-	case SUBID_DVBC_EASYWATCH_MK3:
-	case SUBID_DVBC_CINERGY1200_MK3:
-	case SUBID_DVBC_KNC1_MK3:
-	case SUBID_DVBC_KNC1_TDA10024:
-	case SUBID_DVBC_KNC1_PLUS_MK3:
-		budget_av->reinitialise_demod = 1;
-		budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
-		fe = dvb_attach(tda10023_attach,
-			&philips_cu1216_tda10023_config,
-			&budget_av->budget.i2c_adap,
-			read_pwm(budget_av));
-		if (fe) {
-			fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
-		}
-		break;
-
-	case SUBID_DVBT_EASYWATCH:
-	case SUBID_DVBT_KNC1:
-	case SUBID_DVBT_KNC1_PLUS:
-	case SUBID_DVBT_CINERGY1200:
-		budget_av->reinitialise_demod = 1;
-		fe = dvb_attach(tda10046_attach, &philips_tu1216_config,
-				     &budget_av->budget.i2c_adap);
-		if (fe) {
-			fe->ops.tuner_ops.init = philips_tu1216_tuner_init;
-			fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params;
-		}
-		break;
-	}
-
-	if (fe == NULL) {
-		pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
-		       saa->pci->vendor,
-		       saa->pci->device,
-		       saa->pci->subsystem_vendor,
-		       saa->pci->subsystem_device);
-		return;
-	}
-
-	budget_av->budget.dvb_frontend = fe;
-
-	if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
-				  budget_av->budget.dvb_frontend)) {
-		pr_err("Frontend registration failed!\n");
-		dvb_frontend_detach(budget_av->budget.dvb_frontend);
-		budget_av->budget.dvb_frontend = NULL;
-	}
-}
-
-
-static void budget_av_irq(struct saa7146_dev *dev, u32 * isr)
-{
-	struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
-
-	dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av);
-
-	if (*isr & MASK_10)
-		ttpci_budget_irq10_handler(dev, isr);
-}
-
-static int budget_av_detach(struct saa7146_dev *dev)
-{
-	struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
-	int err;
-
-	dprintk(2, "dev: %p\n", dev);
-
-	if (1 == budget_av->has_saa7113) {
-		saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
-
-		msleep(200);
-
-		saa7146_unregister_device(&budget_av->vd, dev);
-
-		saa7146_vv_release(dev);
-	}
-
-	if (budget_av->budget.ci_present)
-		ciintf_deinit(budget_av);
-
-	if (budget_av->budget.dvb_frontend != NULL) {
-		dvb_unregister_frontend(budget_av->budget.dvb_frontend);
-		dvb_frontend_detach(budget_av->budget.dvb_frontend);
-	}
-	err = ttpci_budget_deinit(&budget_av->budget);
-
-	kfree(budget_av);
-
-	return err;
-}
-
-#define KNC1_INPUTS 2
-static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
-	{ 0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0,
-		V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
-	{ 1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0,
-		V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
-};
-
-static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
-{
-	dprintk(1, "VIDIOC_ENUMINPUT %d\n", i->index);
-	if (i->index >= KNC1_INPUTS)
-		return -EINVAL;
-	memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input));
-	return 0;
-}
-
-static int vidioc_g_input(struct file *file, void *fh, unsigned int *i)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct budget_av *budget_av = (struct budget_av *)dev->ext_priv;
-
-	*i = budget_av->cur_input;
-
-	dprintk(1, "VIDIOC_G_INPUT %d\n", *i);
-	return 0;
-}
-
-static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct budget_av *budget_av = (struct budget_av *)dev->ext_priv;
-
-	dprintk(1, "VIDIOC_S_INPUT %d\n", input);
-	return saa7113_setinput(budget_av, input);
-}
-
-static struct saa7146_ext_vv vv_data;
-
-static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
-{
-	struct budget_av *budget_av;
-	u8 *mac;
-	int err;
-
-	dprintk(2, "dev: %p\n", dev);
-
-	if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL)))
-		return -ENOMEM;
-
-	budget_av->has_saa7113 = 0;
-	budget_av->budget.ci_present = 0;
-
-	dev->ext_priv = budget_av;
-
-	err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE,
-				adapter_nr);
-	if (err) {
-		kfree(budget_av);
-		return err;
-	}
-
-	/* knc1 initialization */
-	saa7146_write(dev, DD1_STREAM_B, 0x04000000);
-	saa7146_write(dev, DD1_INIT, 0x07000600);
-	saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
-
-	if (saa7113_init(budget_av) == 0) {
-		budget_av->has_saa7113 = 1;
-
-		if (0 != saa7146_vv_init(dev, &vv_data)) {
-			/* fixme: proper cleanup here */
-			ERR("cannot init vv subsystem\n");
-			return err;
-		}
-		vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
-		vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
-		vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
-
-		if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) {
-			/* fixme: proper cleanup here */
-			ERR("cannot register capture v4l2 device\n");
-			saa7146_vv_release(dev);
-			return err;
-		}
-
-		/* beware: this modifies dev->vv ... */
-		saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A,
-						SAA7146_HPS_SYNC_PORT_A);
-
-		saa7113_setinput(budget_av, 0);
-	}
-
-	/* fixme: find some sane values here... */
-	saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
-
-	mac = budget_av->budget.dvb_adapter.proposed_mac;
-	if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
-		pr_err("KNC1-%d: Could not read MAC from KNC1 card\n",
-		       budget_av->budget.dvb_adapter.num);
-		memset(mac, 0, 6);
-	} else {
-		pr_info("KNC1-%d: MAC addr = %pM\n",
-			budget_av->budget.dvb_adapter.num, mac);
-	}
-
-	budget_av->budget.dvb_adapter.priv = budget_av;
-	frontend_init(budget_av);
-	ciintf_init(budget_av);
-
-	ttpci_budget_init_hooks(&budget_av->budget);
-
-	return 0;
-}
-
-static struct saa7146_standard standard[] = {
-	{.name = "PAL",.id = V4L2_STD_PAL,
-	 .v_offset = 0x17,.v_field = 288,
-	 .h_offset = 0x14,.h_pixels = 680,
-	 .v_max_out = 576,.h_max_out = 768 },
-
-	{.name = "NTSC",.id = V4L2_STD_NTSC,
-	 .v_offset = 0x16,.v_field = 240,
-	 .h_offset = 0x06,.h_pixels = 708,
-	 .v_max_out = 480,.h_max_out = 640, },
-};
-
-static struct saa7146_ext_vv vv_data = {
-	.inputs = 2,
-	.capabilities = 0,	// perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
-	.flags = 0,
-	.stds = &standard[0],
-	.num_stds = ARRAY_SIZE(standard),
-};
-
-static struct saa7146_extension budget_extension;
-
-MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
-MAKE_BUDGET_INFO(knc1s2,"KNC1 DVB-S2", BUDGET_KNC1S2);
-MAKE_BUDGET_INFO(sates2,"Satelco EasyWatch DVB-S2", BUDGET_KNC1S2);
-MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
-MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
-MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
-MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
-MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S);
-MAKE_BUDGET_INFO(satewps, "Satelco EasyWatch DVB-S", BUDGET_KNC1S);
-MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP);
-MAKE_BUDGET_INFO(satewcmk3, "Satelco EasyWatch DVB-C MK3", BUDGET_KNC1C_MK3);
-MAKE_BUDGET_INFO(satewt, "Satelco EasyWatch DVB-T", BUDGET_KNC1T);
-MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
-MAKE_BUDGET_INFO(knc1spx4, "KNC1 DVB-S Plus X4", BUDGET_KNC1SP);
-MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
-MAKE_BUDGET_INFO(knc1cmk3, "KNC1 DVB-C MK3", BUDGET_KNC1C_MK3);
-MAKE_BUDGET_INFO(knc1ctda10024, "KNC1 DVB-C TDA10024", BUDGET_KNC1C_TDA10024);
-MAKE_BUDGET_INFO(knc1cpmk3, "KNC1 DVB-C Plus MK3", BUDGET_KNC1CP_MK3);
-MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
-MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
-MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
-MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
-MAKE_BUDGET_INFO(cin1200cmk3, "Terratec Cinergy 1200 DVB-C MK3", BUDGET_CIN1200C_MK3);
-MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
-
-static struct pci_device_id pci_tbl[] = {
-	MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
-	MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
-	MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010),
-	MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
-	MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011),
-	MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014),
-	MAKE_EXTENSION_PCI(knc1spx4, 0x1894, 0x0015),
-	MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
-	MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0018),
-	MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0019),
-	MAKE_EXTENSION_PCI(sates2, 0x1894, 0x001d),
-	MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
-	MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
-	MAKE_EXTENSION_PCI(satewps, 0x1894, 0x001b),
-	MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a),
-	MAKE_EXTENSION_PCI(satewcmk3, 0x1894, 0x002c),
-	MAKE_EXTENSION_PCI(satewt, 0x1894, 0x003a),
-	MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
-	MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
-	MAKE_EXTENSION_PCI(knc1cmk3, 0x1894, 0x0022),
-	MAKE_EXTENSION_PCI(knc1ctda10024, 0x1894, 0x0028),
-	MAKE_EXTENSION_PCI(knc1cpmk3, 0x1894, 0x0023),
-	MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
-	MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
-	MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
-	MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155),
-	MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
-	MAKE_EXTENSION_PCI(cin1200cmk3, 0x153b, 0x1176),
-	MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
-	{
-	 .vendor = 0,
-	}
-};
-
-MODULE_DEVICE_TABLE(pci, pci_tbl);
-
-static struct saa7146_extension budget_extension = {
-	.name = "budget_av",
-	.flags = SAA7146_USE_I2C_IRQ,
-
-	.pci_tbl = pci_tbl,
-
-	.module = THIS_MODULE,
-	.attach = budget_av_attach,
-	.detach = budget_av_detach,
-
-	.irq_mask = MASK_10,
-	.irq_func = budget_av_irq,
-};
-
-static int __init budget_av_init(void)
-{
-	return saa7146_register_extension(&budget_extension);
-}
-
-static void __exit budget_av_exit(void)
-{
-	saa7146_unregister_extension(&budget_extension);
-}
-
-module_init(budget_av_init);
-module_exit(budget_av_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
-MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
-		   "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");