Merge tag 'media/v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - remove the deprecated Zoran driver from staging

 - new I2C driver: ST MIPID02 CSI-2 camera bridge

 - new platform driver: Amlogic Meson AO CEC G12A Controller

 - add support for USB audio via the media controller

 - au0828 driver is now supported via the media controller on both on
   media and on usbaudio

 - new kernel test for the media device allocator

 - add support for stateless decoder at vicodec driver

 - lots of other driver improvements fixes and cleanups

* tag 'media/v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (218 commits)
  media: dt-bindings: aspeed-video: Add missing memory-region property
  media: platform: Aspeed: Make reserved memory optional
  media: platform: Aspeed: Remove use of reset line
  media: stm32-dcmi: return appropriate error codes during probe
  media: vsp1: Add support for missing 16-bit RGB555 formats
  media: vsp1: Add support for missing 16-bit RGB444 formats
  media: vsp1: Add support for missing 32-bit RGB formats
  media: v4l: Add definitions for missing 16-bit RGB555 formats
  media: v4l: Add definitions for missing 16-bit RGB4444 formats
  media: v4l: Add definitions for missing 32-bit RGB formats
  media: zoran: remove deprecated driver
  media: MAINTAINERS: Update AO CEC with ao-cec-g12a driver
  media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver
  media: dt-bindings: media: meson-ao-cec: Add G12A AO-CEC-B Compatible
  media: cros-ec-cec: decrement HDMI device refcount
  media: seco-cec: decrement HDMI device refcount
  media: tegra_cec: use new cec_notifier_parse_hdmi_phandle helper
  media: stih_cec: use new cec_notifier_parse_hdmi_phandle helper
  media: s5p_cec: use new cec_notifier_parse_hdmi_phandle helper
  media: meson: ao-cec: use new cec_notifier_parse_hdmi_phandle helper
  ...

12 files changed, 1271 insertions, 163 deletions

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 6d32f8dcf83b..7793358ab8b3 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -8,7 +8,7 @@ config VIDEO_IR_I2C
 	tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT
 	depends on I2C && RC_CORE
 	default y
-	---help---
+	help
 	  Most boards have an IR chip directly connected via GPIO. However,
 	  some video boards have the IR connected via I2C bus.
 
@@ -29,7 +29,7 @@ comment "Audio decoders, processors and mixers"
 config VIDEO_TVAUDIO
 	tristate "Simple audio decoder chips"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for several audio decoder chips found on some bt8xx boards:
 	  Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
 		   tea6320, tea6420, tda8425, ta8874z.
@@ -41,7 +41,7 @@ config VIDEO_TVAUDIO
 config VIDEO_TDA7432
 	tristate "Philips TDA7432 audio processor"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for tda7432 audio decoder chip found on some bt8xx boards.
 
 	  To compile this driver as a module, choose M here: the
@@ -50,7 +50,7 @@ config VIDEO_TDA7432
 config VIDEO_TDA9840
 	tristate "Philips TDA9840 audio processor"
 	depends on I2C
-	---help---
+	help
 	  Support for tda9840 audio decoder chip found on some Zoran boards.
 
 	  To compile this driver as a module, choose M here: the
@@ -60,9 +60,10 @@ config VIDEO_TDA1997X
 	tristate "NXP TDA1997x HDMI receiver"
 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
 	depends on SND_SOC
-	select SND_PCM
 	select HDMI
-	---help---
+	select SND_PCM
+	select V4L2_FWNODE
+	help
 	  V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.
 
 	  To compile this driver as a module, choose M here: the
@@ -71,7 +72,7 @@ config VIDEO_TDA1997X
 config VIDEO_TEA6415C
 	tristate "Philips TEA6415C audio processor"
 	depends on I2C
-	---help---
+	help
 	  Support for tea6415c audio decoder chip found on some bt8xx boards.
 
 	  To compile this driver as a module, choose M here: the
@@ -80,7 +81,7 @@ config VIDEO_TEA6415C
 config VIDEO_TEA6420
 	tristate "Philips TEA6420 audio processor"
 	depends on I2C
-	---help---
+	help
 	  Support for tea6420 audio decoder chip found on some bt8xx boards.
 
 	  To compile this driver as a module, choose M here: the
@@ -89,7 +90,7 @@ config VIDEO_TEA6420
 config VIDEO_MSP3400
 	tristate "Micronas MSP34xx audio decoders"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Micronas MSP34xx series of audio decoders.
 
 	  To compile this driver as a module, choose M here: the
@@ -98,7 +99,7 @@ config VIDEO_MSP3400
 config VIDEO_CS3308
 	tristate "Cirrus Logic CS3308 audio ADC"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Cirrus Logic CS3308 High Performance 8-Channel
 	  Analog Volume Control
 
@@ -108,7 +109,7 @@ config VIDEO_CS3308
 config VIDEO_CS5345
 	tristate "Cirrus Logic CS5345 audio ADC"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Cirrus Logic CS5345 24-bit, 192 kHz
 	  stereo A/D converter.
 
@@ -118,7 +119,7 @@ config VIDEO_CS5345
 config VIDEO_CS53L32A
 	tristate "Cirrus Logic CS53L32A audio ADC"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Cirrus Logic CS53L32A low voltage
 	  stereo A/D converter.
 
@@ -128,7 +129,7 @@ config VIDEO_CS53L32A
 config VIDEO_TLV320AIC23B
 	tristate "Texas Instruments TLV320AIC23B audio codec"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Texas Instruments TLV320AIC23B audio codec.
 
 	  To compile this driver as a module, choose M here: the
@@ -137,7 +138,7 @@ config VIDEO_TLV320AIC23B
 config VIDEO_UDA1342
 	tristate "Philips UDA1342 audio codec"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Philips UDA1342 audio codec.
 
 	  To compile this driver as a module, choose M here: the
@@ -146,7 +147,7 @@ config VIDEO_UDA1342
 config VIDEO_WM8775
 	tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Wolfson Microelectronics WM8775 high
 	  performance stereo A/D Converter with a 4 channel input mixer.
 
@@ -156,7 +157,7 @@ config VIDEO_WM8775
 config VIDEO_WM8739
 	tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Wolfson Microelectronics WM8739
 	  stereo A/D Converter.
 
@@ -166,7 +167,7 @@ config VIDEO_WM8739
 config VIDEO_VP27SMPX
 	tristate "Panasonic VP27's internal MPX"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the internal MPX of the Panasonic VP27s tuner.
 
 	  To compile this driver as a module, choose M here: the
@@ -200,7 +201,7 @@ comment "Video decoders"
 config VIDEO_ADV7180
 	tristate "Analog Devices ADV7180 decoder"
 	depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
-	---help---
+	help
 	  Support for the Analog Devices ADV7180 video decoder.
 
 	  To compile this driver as a module, choose M here: the
@@ -209,7 +210,7 @@ config VIDEO_ADV7180
 config VIDEO_ADV7183
 	tristate "Analog Devices ADV7183 decoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  V4l2 subdevice driver for the Analog Devices
 	  ADV7183 video decoder.
 
@@ -221,7 +222,8 @@ config VIDEO_ADV748X
 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
 	depends on OF
 	select REGMAP_I2C
-	---help---
+	select V4L2_FWNODE
+	help
 	  V4L2 subdevice driver for the Analog Devices
 	  ADV7481 and ADV7482 HDMI/Analog video decoders.
 
@@ -234,7 +236,7 @@ config VIDEO_ADV7604
 	depends on GPIOLIB || COMPILE_TEST
 	select HDMI
 	select V4L2_FWNODE
-	---help---
+	help
 	  Support for the Analog Devices ADV7604 video decoder.
 
 	  This is a Analog Devices Component/Graphics Digitizer
@@ -247,7 +249,7 @@ config VIDEO_ADV7604_CEC
 	bool "Enable Analog Devices ADV7604 CEC support"
 	depends on VIDEO_ADV7604
 	select CEC_CORE
-	---help---
+	help
 	  When selected the adv7604 will support the optional
 	  HDMI CEC feature.
 
@@ -255,7 +257,7 @@ config VIDEO_ADV7842
 	tristate "Analog Devices ADV7842 decoder"
 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
 	select HDMI
-	---help---
+	help
 	  Support for the Analog Devices ADV7842 video decoder.
 
 	  This is a Analog Devices Component/Graphics/SD Digitizer
@@ -268,14 +270,14 @@ config VIDEO_ADV7842_CEC
 	bool "Enable Analog Devices ADV7842 CEC support"
 	depends on VIDEO_ADV7842
 	select CEC_CORE
-	---help---
+	help
 	  When selected the adv7842 will support the optional
 	  HDMI CEC feature.
 
 config VIDEO_BT819
 	tristate "BT819A VideoStream decoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for BT819A video decoder.
 
 	  To compile this driver as a module, choose M here: the
@@ -284,7 +286,7 @@ config VIDEO_BT819
 config VIDEO_BT856
 	tristate "BT856 VideoStream decoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for BT856 video decoder.
 
 	  To compile this driver as a module, choose M here: the
@@ -293,7 +295,7 @@ config VIDEO_BT856
 config VIDEO_BT866
 	tristate "BT866 VideoStream decoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for BT866 video decoder.
 
 	  To compile this driver as a module, choose M here: the
@@ -302,7 +304,7 @@ config VIDEO_BT866
 config VIDEO_KS0127
 	tristate "KS0127 video decoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for KS0127 video decoder.
 
 	  This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
@@ -314,53 +316,16 @@ config VIDEO_KS0127
 config VIDEO_ML86V7667
 	tristate "OKI ML86V7667 video decoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the OKI Semiconductor ML86V7667 video decoder.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ml86v7667.
 
-config VIDEO_AD5820
-	tristate "AD5820 lens voice coil support"
-	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
-	---help---
-	  This is a driver for the AD5820 camera lens voice coil.
-	  It is used for example in Nokia N900 (RX-51).
-
-config VIDEO_AK7375
-	tristate "AK7375 lens voice coil support"
-	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
-	depends on VIDEO_V4L2_SUBDEV_API
-	help
-	  This is a driver for the AK7375 camera lens voice coil.
-	  AK7375 is a 12 bit DAC with 120mA output current sink
-	  capability. This is designed for linear control of
-	  voice coil motors, controlled via I2C serial interface.
-
-config VIDEO_DW9714
-	tristate "DW9714 lens voice coil support"
-	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
-	depends on VIDEO_V4L2_SUBDEV_API
-	---help---
-	  This is a driver for the DW9714 camera lens voice coil.
-	  DW9714 is a 10 bit DAC with 120mA output current sink
-	  capability. This is designed for linear control of
-	  voice coil motors, controlled via I2C serial interface.
-
-config VIDEO_DW9807_VCM
-	tristate "DW9807 lens voice coil support"
-	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
-	depends on VIDEO_V4L2_SUBDEV_API
-	---help---
-	  This is a driver for the DW9807 camera lens voice coil.
-	  DW9807 is a 10 bit DAC with 100mA output current sink
-	  capability. This is designed for linear control of
-	  voice coil motors, controlled via I2C serial interface.
-
 config VIDEO_SAA7110
 	tristate "Philips SAA7110 video decoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Philips SAA7110 video decoders.
 
 	  To compile this driver as a module, choose M here: the
@@ -369,7 +334,7 @@ config VIDEO_SAA7110
 config VIDEO_SAA711X
 	tristate "Philips SAA7111/3/4/5 video decoders"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Philips SAA7111/3/4/5 video decoders.
 
 	  To compile this driver as a module, choose M here: the
@@ -380,7 +345,7 @@ config VIDEO_TC358743
 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
 	select HDMI
 	select V4L2_FWNODE
-	---help---
+	help
 	  Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge.
 
 	  To compile this driver as a module, choose M here: the
@@ -390,7 +355,7 @@ config VIDEO_TC358743_CEC
 	bool "Enable Toshiba TC358743 CEC support"
 	depends on VIDEO_TC358743
 	select CEC_CORE
-	---help---
+	help
 	  When selected the tc358743 will support the optional
 	  HDMI CEC feature.
 
@@ -398,7 +363,7 @@ config VIDEO_TVP514X
 	tristate "Texas Instruments TVP514x video decoder"
 	depends on VIDEO_V4L2 && I2C
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the TI TVP5146/47
 	  decoder. It is currently working with the TI OMAP3 camera
 	  controller.
@@ -410,7 +375,7 @@ config VIDEO_TVP5150
 	tristate "Texas Instruments TVP5150 video decoder"
 	depends on VIDEO_V4L2 && I2C
 	select V4L2_FWNODE
-	---help---
+	help
 	  Support for the Texas Instruments TVP5150 video decoder.
 
 	  To compile this driver as a module, choose M here: the
@@ -420,7 +385,7 @@ config VIDEO_TVP7002
 	tristate "Texas Instruments TVP7002 video decoder"
 	depends on VIDEO_V4L2 && I2C
 	select V4L2_FWNODE
-	---help---
+	help
 	  Support for the Texas Instruments TVP7002 video decoder.
 
 	  To compile this driver as a module, choose M here: the
@@ -429,7 +394,7 @@ config VIDEO_TVP7002
 config VIDEO_TW2804
 	tristate "Techwell TW2804 multiple video decoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Techwell tw2804 multiple video decoder.
 
 	  To compile this driver as a module, choose M here: the
@@ -438,7 +403,7 @@ config VIDEO_TW2804
 config VIDEO_TW9903
 	tristate "Techwell TW9903 video decoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Techwell tw9903 multi-standard video decoder
 	  with high quality down scaler.
 
@@ -448,7 +413,7 @@ config VIDEO_TW9903
 config VIDEO_TW9906
 	tristate "Techwell TW9906 video decoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Techwell tw9906 enhanced multi-standard comb filter
 	  video decoder with YCbCr input support.
 
@@ -458,7 +423,7 @@ config VIDEO_TW9906
 config VIDEO_TW9910
 	tristate "Techwell TW9910 video decoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for Techwell TW9910 NTSC/PAL/SECAM video decoder.
 
 	  To compile this driver as a module, choose M here: the
@@ -467,7 +432,7 @@ config VIDEO_TW9910
 config VIDEO_VPX3220
 	tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for VPX322x video decoders.
 
 	  To compile this driver as a module, choose M here: the
@@ -478,7 +443,7 @@ comment "Video and audio decoders"
 config VIDEO_SAA717X
 	tristate "Philips SAA7171/3/4 audio/video decoders"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Philips SAA7171/3/4 audio/video decoders.
 
 	  To compile this driver as a module, choose M here: the
@@ -491,7 +456,7 @@ comment "Video encoders"
 config VIDEO_SAA7127
 	tristate "Philips SAA7127/9 digital video encoders"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Philips SAA7127/9 digital video encoders.
 
 	  To compile this driver as a module, choose M here: the
@@ -500,7 +465,7 @@ config VIDEO_SAA7127
 config VIDEO_SAA7185
 	tristate "Philips SAA7185 video encoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Philips SAA7185 video encoder.
 
 	  To compile this driver as a module, choose M here: the
@@ -509,7 +474,7 @@ config VIDEO_SAA7185
 config VIDEO_ADV7170
 	tristate "Analog Devices ADV7170 video encoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Analog Devices ADV7170 video encoder driver
 
 	  To compile this driver as a module, choose M here: the
@@ -518,7 +483,7 @@ config VIDEO_ADV7170
 config VIDEO_ADV7175
 	tristate "Analog Devices ADV7175 video encoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Analog Devices ADV7175 video encoder driver
 
 	  To compile this driver as a module, choose M here: the
@@ -546,7 +511,7 @@ config VIDEO_ADV7511
 	tristate "Analog Devices ADV7511 encoder"
 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
 	select HDMI
-	---help---
+	help
 	  Support for the Analog Devices ADV7511 video encoder.
 
 	  This is a Analog Devices HDMI transmitter.
@@ -558,14 +523,14 @@ config VIDEO_ADV7511_CEC
 	bool "Enable Analog Devices ADV7511 CEC support"
 	depends on VIDEO_ADV7511
 	select CEC_CORE
-	---help---
+	help
 	  When selected the adv7511 will support the optional
 	  HDMI CEC feature.
 
 config VIDEO_AD9389B
 	tristate "Analog Devices AD9389B encoder"
 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
-	---help---
+	help
 	  Support for the Analog Devices AD9389B video encoder.
 
 	  This is a Analog Devices HDMI transmitter.
@@ -582,7 +547,7 @@ config VIDEO_AK881X
 config VIDEO_THS8200
 	tristate "Texas Instruments THS8200 video encoder"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Texas Instruments THS8200 video encoder.
 
 	  To compile this driver as a module, choose M here: the
@@ -612,7 +577,7 @@ config VIDEO_IMX258
 	tristate "Sony IMX258 sensor support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	depends on MEDIA_CAMERA_SUPPORT
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the Sony
 	  IMX258 camera.
 
@@ -624,7 +589,7 @@ config VIDEO_IMX274
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	depends on MEDIA_CAMERA_SUPPORT
 	select REGMAP_I2C
-	---help---
+	help
 	  This is a V4L2 sensor driver for the Sony IMX274
 	  CMOS image sensor.
 
@@ -666,7 +631,7 @@ config VIDEO_OV2659
 	depends on VIDEO_V4L2 && I2C
 	depends on MEDIA_CAMERA_SUPPORT
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV2659 camera.
 
@@ -678,7 +643,7 @@ config VIDEO_OV2680
 	depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
 	depends on MEDIA_CAMERA_SUPPORT
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV2680 camera.
 
@@ -690,7 +655,7 @@ config VIDEO_OV2685
 	depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
 	depends on MEDIA_CAMERA_SUPPORT
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV2685 camera.
 
@@ -703,7 +668,7 @@ config VIDEO_OV5640
 	depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
 	depends on MEDIA_CAMERA_SUPPORT
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the Omnivision
 	  OV5640 camera sensor with a MIPI CSI-2 interface.
 
@@ -713,7 +678,7 @@ config VIDEO_OV5645
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	depends on MEDIA_CAMERA_SUPPORT
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV5645 camera.
 
@@ -725,7 +690,7 @@ config VIDEO_OV5647
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	depends on MEDIA_CAMERA_SUPPORT
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV5647 camera.
 
@@ -736,7 +701,7 @@ config VIDEO_OV6650
 	tristate "OmniVision OV6650 sensor support"
 	depends on I2C && VIDEO_V4L2
 	depends on MEDIA_CAMERA_SUPPORT
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV6650 camera.
 
@@ -749,7 +714,7 @@ config VIDEO_OV5670
 	depends on MEDIA_CAMERA_SUPPORT
 	depends on MEDIA_CONTROLLER
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV5670 camera.
 
@@ -760,7 +725,7 @@ config VIDEO_OV5695
 	tristate "OmniVision OV5695 sensor support"
 	depends on I2C && VIDEO_V4L2
 	depends on MEDIA_CAMERA_SUPPORT
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV5695 camera.
 
@@ -784,7 +749,7 @@ config VIDEO_OV772X
 	depends on I2C && VIDEO_V4L2
 	depends on MEDIA_CAMERA_SUPPORT
 	select REGMAP_SCCB
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV772x camera.
 
@@ -795,7 +760,7 @@ config VIDEO_OV7640
 	tristate "OmniVision OV7640 sensor support"
 	depends on I2C && VIDEO_V4L2
 	depends on MEDIA_CAMERA_SUPPORT
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV7640 camera.
 
@@ -807,7 +772,7 @@ config VIDEO_OV7670
 	depends on I2C && VIDEO_V4L2
 	depends on MEDIA_CAMERA_SUPPORT
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV7670 VGA camera.  It currently only works with the M88ALP01
 	  controller.
@@ -816,7 +781,7 @@ config VIDEO_OV7740
 	tristate "OmniVision OV7740 sensor support"
 	depends on I2C && VIDEO_V4L2
 	depends on MEDIA_CAMERA_SUPPORT
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV7740 VGA camera sensor.
 
@@ -843,7 +808,7 @@ config VIDEO_OV9650
 	tristate "OmniVision OV9650/OV9652 sensor support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	select REGMAP_SCCB
-	---help---
+	help
 	  This is a V4L2 sensor driver for the Omnivision
 	  OV9650 and OV9652 camera sensors.
 
@@ -852,7 +817,7 @@ config VIDEO_OV13858
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	depends on MEDIA_CAMERA_SUPPORT
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV13858 camera.
 
@@ -860,7 +825,7 @@ config VIDEO_VS6624
 	tristate "ST VS6624 sensor support"
 	depends on VIDEO_V4L2 && I2C
 	depends on MEDIA_CAMERA_SUPPORT
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the ST VS6624
 	  camera.
 
@@ -880,7 +845,7 @@ config VIDEO_MT9M032
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	depends on MEDIA_CAMERA_SUPPORT
 	select VIDEO_APTINA_PLL
-	---help---
+	help
 	  This driver supports MT9M032 camera sensors from Aptina, monochrome
 	  models only.
 
@@ -897,7 +862,7 @@ config VIDEO_MT9P031
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	depends on MEDIA_CAMERA_SUPPORT
 	select VIDEO_APTINA_PLL
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the Aptina
 	  (Micron) mt9p031 5 Mpixel camera.
 
@@ -905,7 +870,7 @@ config VIDEO_MT9T001
 	tristate "Aptina MT9T001 support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	depends on MEDIA_CAMERA_SUPPORT
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the Aptina
 	  (Micron) mt0t001 3 Mpixel camera.
 
@@ -913,7 +878,7 @@ config VIDEO_MT9T112
 	tristate "Aptina MT9T111/MT9T112 support"
 	depends on I2C && VIDEO_V4L2
 	depends on MEDIA_CAMERA_SUPPORT
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the Aptina
 	  (Micron) MT9T111 and MT9T112 3 Mpixel camera.
 
@@ -924,7 +889,7 @@ config VIDEO_MT9V011
 	tristate "Micron mt9v011 sensor support"
 	depends on I2C && VIDEO_V4L2
 	depends on MEDIA_CAMERA_SUPPORT
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the Micron
 	  mt0v011 1.3 Mpixel camera.  It currently only works with the
 	  em28xx driver.
@@ -935,7 +900,7 @@ config VIDEO_MT9V032
 	depends on MEDIA_CAMERA_SUPPORT
 	select REGMAP_I2C
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a Video4Linux2 sensor driver for the Micron
 	  MT9V032 752x480 CMOS sensor.
 
@@ -954,14 +919,14 @@ config VIDEO_SR030PC30
 	tristate "Siliconfile SR030PC30 sensor support"
 	depends on I2C && VIDEO_V4L2
 	depends on MEDIA_CAMERA_SUPPORT
-	---help---
+	help
 	  This driver supports SR030PC30 VGA camera from Siliconfile
 
 config VIDEO_NOON010PC30
 	tristate "Siliconfile NOON010PC30 sensor support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	depends on MEDIA_CAMERA_SUPPORT
-	---help---
+	help
 	  This driver supports NOON010PC30 CIF camera from Siliconfile
 
 source "drivers/media/i2c/m5mols/Kconfig"
@@ -981,7 +946,7 @@ config VIDEO_S5K6AA
 	tristate "Samsung S5K6AAFX sensor support"
 	depends on MEDIA_CAMERA_SUPPORT
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	---help---
+	help
 	  This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
 	  camera sensor with an embedded SoC image signal processor.
 
@@ -989,7 +954,7 @@ config VIDEO_S5K6A3
 	tristate "Samsung S5K6A3 sensor support"
 	depends on MEDIA_CAMERA_SUPPORT
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	---help---
+	help
 	  This is a V4L2 sensor driver for Samsung S5K6A3 raw
 	  camera sensor.
 
@@ -997,7 +962,7 @@ config VIDEO_S5K4ECGX
 	tristate "Samsung S5K4ECGX sensor support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	select CRC32
-	---help---
+	help
 	  This is a V4L2 sensor driver for Samsung S5K4ECGX 5M
 	  camera sensor with an embedded SoC image signal processor.
 
@@ -1005,7 +970,7 @@ config VIDEO_S5K5BAF
 	tristate "Samsung S5K5BAF sensor support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a V4L2 sensor driver for Samsung S5K5BAF 2M
 	  camera sensor with an embedded SoC image signal processor.
 
@@ -1016,17 +981,56 @@ config VIDEO_S5C73M3
 	tristate "Samsung S5C73M3 sensor support"
 	depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a V4L2 sensor driver for Samsung S5C73M3
 	  8 Mpixel camera.
 
+comment "Lens drivers"
+
+config VIDEO_AD5820
+	tristate "AD5820 lens voice coil support"
+	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+	help
+	  This is a driver for the AD5820 camera lens voice coil.
+	  It is used for example in Nokia N900 (RX-51).
+
+config VIDEO_AK7375
+	tristate "AK7375 lens voice coil support"
+	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+	depends on VIDEO_V4L2_SUBDEV_API
+	help
+	  This is a driver for the AK7375 camera lens voice coil.
+	  AK7375 is a 12 bit DAC with 120mA output current sink
+	  capability. This is designed for linear control of
+	  voice coil motors, controlled via I2C serial interface.
+
+config VIDEO_DW9714
+	tristate "DW9714 lens voice coil support"
+	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+	depends on VIDEO_V4L2_SUBDEV_API
+	help
+	  This is a driver for the DW9714 camera lens voice coil.
+	  DW9714 is a 10 bit DAC with 120mA output current sink
+	  capability. This is designed for linear control of
+	  voice coil motors, controlled via I2C serial interface.
+
+config VIDEO_DW9807_VCM
+	tristate "DW9807 lens voice coil support"
+	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+	depends on VIDEO_V4L2_SUBDEV_API
+	help
+	  This is a driver for the DW9807 camera lens voice coil.
+	  DW9807 is a 10 bit DAC with 100mA output current sink
+	  capability. This is designed for linear control of
+	  voice coil motors, controlled via I2C serial interface.
+
 comment "Flash devices"
 
 config VIDEO_ADP1653
 	tristate "ADP1653 flash support"
 	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
 	depends on MEDIA_CAMERA_SUPPORT
-	---help---
+	help
 	  This is a driver for the ADP1653 flash controller. It is used for
 	  example in Nokia N900.
 
@@ -1035,7 +1039,7 @@ config VIDEO_LM3560
 	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
 	depends on MEDIA_CAMERA_SUPPORT
 	select REGMAP_I2C
-	---help---
+	help
 	  This is a driver for the lm3560 dual flash controllers. It controls
 	  flash, torch LEDs.
 
@@ -1044,7 +1048,7 @@ config VIDEO_LM3646
 	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
 	depends on MEDIA_CAMERA_SUPPORT
 	select REGMAP_I2C
-	---help---
+	help
 	  This is a driver for the lm3646 dual flash controllers. It controls
 	  flash, torch LEDs.
 
@@ -1053,7 +1057,7 @@ comment "Video improvement chips"
 config VIDEO_UPD64031A
 	tristate "NEC Electronics uPD64031A Ghost Reduction"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the NEC Electronics uPD64031A Ghost Reduction
 	  video chip. It is most often found in NTSC TV cards made for
 	  Japan and is used to reduce the 'ghosting' effect that can
@@ -1065,7 +1069,7 @@ config VIDEO_UPD64031A
 config VIDEO_UPD64083
 	tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the NEC Electronics uPD64083 3-Dimensional Y/C
 	  separation video chip. It is used to improve the quality of
 	  the colors of a composite signal.
@@ -1079,7 +1083,7 @@ config VIDEO_SAA6752HS
 	tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
 	depends on VIDEO_V4L2 && I2C
 	select CRC32
-	---help---
+	help
 	  Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
 	  audio encoder with multiplexer.
 
@@ -1091,7 +1095,7 @@ comment "SDR tuner chips"
 config SDR_MAX2175
 	tristate "Maxim 2175 RF to Bits tuner"
 	depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
-	---help---
+	help
 	  Support for Maxim 2175 tuner. It is an advanced analog/digital
 	  radio receiver with RF-to-Bits front-end designed for SDR solutions.
 
@@ -1112,7 +1116,7 @@ config VIDEO_THS7303
 config VIDEO_M52790
 	tristate "Mitsubishi M52790 A/V switch"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	 Support for the Mitsubishi M52790 A/V switch.
 
 	 To compile this driver as a module, choose M here: the
@@ -1123,7 +1127,7 @@ config VIDEO_I2C
 	depends on VIDEO_V4L2 && I2C
 	select VIDEOBUF2_VMALLOC
 	imply HWMON
-	---help---
+	help
 	  Enable the I2C transport video support which supports the
 	  following:
 	   * Panasonic AMG88xx Grid-Eye Sensors
@@ -1132,6 +1136,19 @@ config VIDEO_I2C
 	  To compile this driver as a module, choose M here: the
 	  module will be called video-i2c
 
+config VIDEO_ST_MIPID02
+	tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on MEDIA_CAMERA_SUPPORT
+	select V4L2_FWNODE
+	help
+	  Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge.
+	  It is used to allow usage of CSI-2 sensor with PARALLEL port
+	  controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called st-mipid02.
+
 endmenu
 
 endif
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index a64fca82e0c4..d8ad9dad495d 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -113,5 +113,6 @@ obj-$(CONFIG_VIDEO_IMX258)	+= imx258.o
 obj-$(CONFIG_VIDEO_IMX274)	+= imx274.o
 obj-$(CONFIG_VIDEO_IMX319)	+= imx319.o
 obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
+obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
 
 obj-$(CONFIG_SDR_MAX2175) += max2175.o
diff --git a/drivers/media/i2c/cx25840/Kconfig b/drivers/media/i2c/cx25840/Kconfig
index 451133ad41ff..f4b31d7cb440 100644
--- a/drivers/media/i2c/cx25840/Kconfig
+++ b/drivers/media/i2c/cx25840/Kconfig
@@ -1,7 +1,7 @@
 config VIDEO_CX25840
 	tristate "Conexant CX2584x audio/video decoders"
 	depends on VIDEO_V4L2 && I2C
-	---help---
+	help
 	  Support for the Conexant CX2584x audio/video decoders.
 
 	  To compile this driver as a module, choose M here: the
diff --git a/drivers/media/i2c/et8ek8/Kconfig b/drivers/media/i2c/et8ek8/Kconfig
index 9fe409e95666..ab23b41bf353 100644
--- a/drivers/media/i2c/et8ek8/Kconfig
+++ b/drivers/media/i2c/et8ek8/Kconfig
@@ -2,6 +2,6 @@ config VIDEO_ET8EK8
 	tristate "ET8EK8 camera sensor support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a driver for the Toshiba ET8EK8 5 MP camera sensor.
 	  It is used for example in Nokia N900 (RX-51).
diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
index 9857e151db46..83e9961b0505 100644
--- a/drivers/media/i2c/imx214.c
+++ b/drivers/media/i2c/imx214.c
@@ -588,12 +588,10 @@ static int imx214_set_format(struct v4l2_subdev *sd,
 
 	__crop = __imx214_get_pad_crop(imx214, cfg, format->pad, format->which);
 
-	if (format)
-		mode = v4l2_find_nearest_size(imx214_modes,
-				ARRAY_SIZE(imx214_modes), width, height,
-				format->format.width, format->format.height);
-	else
-		mode = &imx214_modes[0];
+	mode = v4l2_find_nearest_size(imx214_modes,
+				      ARRAY_SIZE(imx214_modes), width, height,
+				      format->format.width,
+				      format->format.height);
 
 	__crop->width = mode->width;
 	__crop->height = mode->height;
diff --git a/drivers/media/i2c/m5mols/Kconfig b/drivers/media/i2c/m5mols/Kconfig
index dc8c2505907e..be0bb3f1bc22 100644
--- a/drivers/media/i2c/m5mols/Kconfig
+++ b/drivers/media/i2c/m5mols/Kconfig
@@ -2,5 +2,5 @@ config VIDEO_M5MOLS
 	tristate "Fujitsu M-5MOLS 8MP sensor support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	depends on MEDIA_CAMERA_SUPPORT
-	---help---
+	help
 	  This driver supports Fujitsu M-5MOLS camera sensor with ISP
diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
index 799acce803fe..5ed2413eac8a 100644
--- a/drivers/media/i2c/ov2659.c
+++ b/drivers/media/i2c/ov2659.c
@@ -1117,8 +1117,10 @@ static int ov2659_set_fmt(struct v4l2_subdev *sd,
 		if (ov2659_formats[index].code == mf->code)
 			break;
 
-	if (index < 0)
-		return -EINVAL;
+	if (index < 0) {
+		index = 0;
+		mf->code = ov2659_formats[index].code;
+	}
 
 	mf->colorspace = V4L2_COLORSPACE_SRGB;
 	mf->field = V4L2_FIELD_NONE;
@@ -1130,7 +1132,7 @@ static int ov2659_set_fmt(struct v4l2_subdev *sd,
 		mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
 		*mf = fmt->format;
 #else
-		return -ENOTTY;
+		ret = -ENOTTY;
 #endif
 	} else {
 		s64 val;
diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c
index c33fd584cb44..1b972e591b48 100644
--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -804,15 +804,25 @@ static int ov6650_prog_dflt(struct i2c_client *client)
 	return ret;
 }
 
-static int ov6650_video_probe(struct i2c_client *client)
+static int ov6650_video_probe(struct v4l2_subdev *sd)
 {
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct ov6650 *priv = to_ov6650(client);
 	u8		pidh, pidl, midh, midl;
 	int		ret;
 
-	ret = ov6650_s_power(&priv->subdev, 1);
-	if (ret < 0)
+	priv->clk = v4l2_clk_get(&client->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		ret = PTR_ERR(priv->clk);
+		dev_err(&client->dev, "v4l2_clk request err: %d\n", ret);
 		return ret;
+	}
+
+	ret = ov6650_s_power(sd, 1);
+	if (ret < 0)
+		goto eclkput;
+
+	msleep(20);
 
 	/*
 	 * check and show product ID and manufacturer ID
@@ -846,7 +856,12 @@ static int ov6650_video_probe(struct i2c_client *client)
 		ret = v4l2_ctrl_handler_setup(&priv->hdl);
 
 done:
-	ov6650_s_power(&priv->subdev, 0);
+	ov6650_s_power(sd, 0);
+	if (!ret)
+		return 0;
+eclkput:
+	v4l2_clk_put(priv->clk);
+
 	return ret;
 }
 
@@ -929,6 +944,10 @@ static const struct v4l2_subdev_ops ov6650_subdev_ops = {
 	.pad	= &ov6650_pad_ops,
 };
 
+static const struct v4l2_subdev_internal_ops ov6650_internal_ops = {
+	.registered = ov6650_video_probe,
+};
+
 /*
  * i2c_driver function
  */
@@ -989,18 +1008,12 @@ static int ov6650_probe(struct i2c_client *client,
 	priv->code	  = MEDIA_BUS_FMT_YUYV8_2X8;
 	priv->colorspace  = V4L2_COLORSPACE_JPEG;
 
-	priv->clk = v4l2_clk_get(&client->dev, NULL);
-	if (IS_ERR(priv->clk)) {
-		ret = PTR_ERR(priv->clk);
-		goto eclkget;
-	}
+	priv->subdev.internal_ops = &ov6650_internal_ops;
+	priv->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
 
-	ret = ov6650_video_probe(client);
-	if (ret) {
-		v4l2_clk_put(priv->clk);
-eclkget:
+	ret = v4l2_async_register_subdev(&priv->subdev);
+	if (ret)
 		v4l2_ctrl_handler_free(&priv->hdl);
-	}
 
 	return ret;
 }
@@ -1010,7 +1023,7 @@ static int ov6650_remove(struct i2c_client *client)
 	struct ov6650 *priv = to_ov6650(client);
 
 	v4l2_clk_put(priv->clk);
-	v4l2_device_unregister_subdev(&priv->subdev);
+	v4l2_async_unregister_subdev(&priv->subdev);
 	v4l2_ctrl_handler_free(&priv->hdl);
 	return 0;
 }
diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index a7d26b294eb5..44c3eed8a858 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -864,7 +864,15 @@ static int ov7675_set_framerate(struct v4l2_subdev *sd,
 	/* Recalculate frame rate */
 	ov7675_get_framerate(sd, tpf);
 
-	return ov7675_apply_framerate(sd);
+	/*
+	 * If the device is not powered up by the host driver do
+	 * not apply any changes to H/W at this time. Instead
+	 * the framerate will be restored right after power-up.
+	 */
+	if (info->on)
+		return ov7675_apply_framerate(sd);
+
+	return 0;
 }
 
 static void ov7670_get_framerate_legacy(struct v4l2_subdev *sd,
@@ -895,7 +903,16 @@ static int ov7670_set_framerate_legacy(struct v4l2_subdev *sd,
 	info->clkrc = (info->clkrc & 0x80) | div;
 	tpf->numerator = 1;
 	tpf->denominator = info->clock_speed / div;
-	return ov7670_write(sd, REG_CLKRC, info->clkrc);
+
+	/*
+	 * If the device is not powered up by the host driver do
+	 * not apply any changes to H/W at this time. Instead
+	 * the framerate will be restored right after power-up.
+	 */
+	if (info->on)
+		return ov7670_write(sd, REG_CLKRC, info->clkrc);
+
+	return 0;
 }
 
 /*
@@ -1105,9 +1122,13 @@ static int ov7670_set_fmt(struct v4l2_subdev *sd,
 	if (ret)
 		return ret;
 
-	ret = ov7670_apply_fmt(sd);
-	if (ret)
-		return ret;
+	/*
+	 * If the device is not powered up by the host driver do
+	 * not apply any changes to H/W at this time. Instead
+	 * the frame format will be restored right after power-up.
+	 */
+	if (info->on)
+		return ov7670_apply_fmt(sd);
 
 	return 0;
 }
@@ -1664,6 +1685,7 @@ static int ov7670_s_power(struct v4l2_subdev *sd, int on)
 
 	if (on) {
 		ov7670_power_on (sd);
+		ov7670_init(sd, 0);
 		ov7670_apply_fmt(sd);
 		ov7675_apply_framerate(sd);
 		v4l2_ctrl_handler_setup(&info->hdl);
diff --git a/drivers/media/i2c/ov7740.c b/drivers/media/i2c/ov7740.c
index dfece91ce96b..54e80a60aa57 100644
--- a/drivers/media/i2c/ov7740.c
+++ b/drivers/media/i2c/ov7740.c
@@ -448,6 +448,27 @@ static int ov7740_get_gain(struct ov7740 *ov7740, struct v4l2_ctrl *ctrl)
 	return 0;
 }
 
+static int ov7740_get_exp(struct ov7740 *ov7740, struct v4l2_ctrl *ctrl)
+{
+	struct regmap *regmap = ov7740->regmap;
+	unsigned int value0, value1;
+	int ret;
+
+	if (ctrl->val == V4L2_EXPOSURE_MANUAL)
+		return 0;
+
+	ret = regmap_read(regmap, REG_AEC, &value0);
+	if (ret)
+		return ret;
+	ret = regmap_read(regmap, REG_HAEC, &value1);
+	if (ret)
+		return ret;
+
+	ov7740->exposure->val = (value1 << 8) | (value0 & 0xff);
+
+	return 0;
+}
+
 static int ov7740_set_exp(struct regmap *regmap, int value)
 {
 	int ret;
@@ -494,6 +515,9 @@ static int ov7740_get_volatile_ctrl(struct v4l2_ctrl *ctrl)
 	case V4L2_CID_AUTOGAIN:
 		ret = ov7740_get_gain(ov7740, ctrl);
 		break;
+	case V4L2_CID_EXPOSURE_AUTO:
+		ret = ov7740_get_exp(ov7740, ctrl);
+		break;
 	default:
 		ret = -EINVAL;
 		break;
@@ -991,8 +1015,6 @@ static int ov7740_init_controls(struct ov7740 *ov7740)
 
 	ov7740->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
 					   V4L2_CID_EXPOSURE, 0, 65535, 1, 500);
-	if (ov7740->exposure)
-		ov7740->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
 
 	ov7740->auto_exposure = v4l2_ctrl_new_std_menu(ctrl_hdlr,
 					&ov7740_ctrl_ops,
@@ -1003,7 +1025,7 @@ static int ov7740_init_controls(struct ov7740 *ov7740)
 	v4l2_ctrl_auto_cluster(3, &ov7740->auto_wb, 0, false);
 	v4l2_ctrl_auto_cluster(2, &ov7740->auto_gain, 0, true);
 	v4l2_ctrl_auto_cluster(2, &ov7740->auto_exposure,
-			       V4L2_EXPOSURE_MANUAL, false);
+			       V4L2_EXPOSURE_MANUAL, true);
 	v4l2_ctrl_cluster(2, &ov7740->hflip);
 
 	if (ctrl_hdlr->error) {
diff --git a/drivers/media/i2c/smiapp/Kconfig b/drivers/media/i2c/smiapp/Kconfig
index f59718d8e51e..26b54f2aa95b 100644
--- a/drivers/media/i2c/smiapp/Kconfig
+++ b/drivers/media/i2c/smiapp/Kconfig
@@ -4,5 +4,5 @@ config VIDEO_SMIAPP
 	depends on MEDIA_CAMERA_SUPPORT
 	select VIDEO_SMIAPP_PLL
 	select V4L2_FWNODE
-	---help---
+	help
 	  This is a generic driver for SMIA++/SMIA camera modules.
diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c
new file mode 100644
index 000000000000..9369f38dbf3d
--- /dev/null
+++ b/drivers/media/i2c/st-mipid02.c
@@ -0,0 +1,1033 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for ST MIPID02 CSI-2 to PARALLEL bridge
+ *
+ * Copyright (C) STMicroelectronics SA 2019
+ * Authors: Mickael Guene <mickael.guene@st.com>
+ *          for STMicroelectronics.
+ *
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+#define MIPID02_CLK_LANE_WR_REG1			0x01
+#define MIPID02_CLK_LANE_REG1				0x02
+#define MIPID02_CLK_LANE_REG3				0x04
+#define MIPID02_DATA_LANE0_REG1				0x05
+#define MIPID02_DATA_LANE0_REG2				0x06
+#define MIPID02_DATA_LANE1_REG1				0x09
+#define MIPID02_DATA_LANE1_REG2				0x0a
+#define MIPID02_MODE_REG1				0x14
+#define MIPID02_MODE_REG2				0x15
+#define MIPID02_DATA_ID_RREG				0x17
+#define MIPID02_DATA_SELECTION_CTRL			0x19
+#define MIPID02_PIX_WIDTH_CTRL				0x1e
+#define MIPID02_PIX_WIDTH_CTRL_EMB			0x1f
+
+/* Bits definition for MIPID02_CLK_LANE_REG1 */
+#define CLK_ENABLE					BIT(0)
+/* Bits definition for MIPID02_CLK_LANE_REG3 */
+#define CLK_MIPI_CSI					BIT(1)
+/* Bits definition for MIPID02_DATA_LANE0_REG1 */
+#define DATA_ENABLE					BIT(0)
+/* Bits definition for MIPID02_DATA_LANEx_REG2 */
+#define DATA_MIPI_CSI					BIT(0)
+/* Bits definition for MIPID02_MODE_REG1 */
+#define MODE_DATA_SWAP					BIT(2)
+#define MODE_NO_BYPASS					BIT(6)
+/* Bits definition for MIPID02_MODE_REG2 */
+#define MODE_HSYNC_ACTIVE_HIGH				BIT(1)
+#define MODE_VSYNC_ACTIVE_HIGH				BIT(2)
+/* Bits definition for MIPID02_DATA_SELECTION_CTRL */
+#define SELECTION_MANUAL_DATA				BIT(2)
+#define SELECTION_MANUAL_WIDTH				BIT(3)
+
+static const u32 mipid02_supported_fmt_codes[] = {
+	MEDIA_BUS_FMT_SBGGR8_1X8, MEDIA_BUS_FMT_SGBRG8_1X8,
+	MEDIA_BUS_FMT_SGRBG8_1X8, MEDIA_BUS_FMT_SRGGB8_1X8,
+	MEDIA_BUS_FMT_SBGGR10_1X10, MEDIA_BUS_FMT_SGBRG10_1X10,
+	MEDIA_BUS_FMT_SGRBG10_1X10, MEDIA_BUS_FMT_SRGGB10_1X10,
+	MEDIA_BUS_FMT_SBGGR12_1X12, MEDIA_BUS_FMT_SGBRG12_1X12,
+	MEDIA_BUS_FMT_SGRBG12_1X12, MEDIA_BUS_FMT_SRGGB12_1X12,
+	MEDIA_BUS_FMT_UYVY8_1X16, MEDIA_BUS_FMT_BGR888_1X24
+};
+
+/* regulator supplies */
+static const char * const mipid02_supply_name[] = {
+	"VDDE", /* 1.8V digital I/O supply */
+	"VDDIN", /* 1V8 voltage regulator supply */
+};
+
+#define MIPID02_NUM_SUPPLIES		ARRAY_SIZE(mipid02_supply_name)
+
+#define MIPID02_SINK_0			0
+#define MIPID02_SINK_1			1
+#define MIPID02_SOURCE			2
+#define MIPID02_PAD_NB			3
+
+struct mipid02_dev {
+	struct i2c_client *i2c_client;
+	struct regulator_bulk_data supplies[MIPID02_NUM_SUPPLIES];
+	struct v4l2_subdev sd;
+	struct media_pad pad[MIPID02_PAD_NB];
+	struct clk *xclk;
+	struct gpio_desc *reset_gpio;
+	/* endpoints info */
+	struct v4l2_fwnode_endpoint rx;
+	u64 link_frequency;
+	struct v4l2_fwnode_endpoint tx;
+	/* remote source */
+	struct v4l2_async_subdev asd;
+	struct v4l2_async_notifier notifier;
+	struct v4l2_subdev *s_subdev;
+	/* registers */
+	struct {
+		u8 clk_lane_reg1;
+		u8 data_lane0_reg1;
+		u8 data_lane1_reg1;
+		u8 mode_reg1;
+		u8 mode_reg2;
+		u8 data_id_rreg;
+		u8 pix_width_ctrl;
+		u8 pix_width_ctrl_emb;
+	} r;
+	/* lock to protect all members below */
+	struct mutex lock;
+	bool streaming;
+	struct v4l2_mbus_framefmt fmt;
+};
+
+static int bpp_from_code(__u32 code)
+{
+	switch (code) {
+	case MEDIA_BUS_FMT_SBGGR8_1X8:
+	case MEDIA_BUS_FMT_SGBRG8_1X8:
+	case MEDIA_BUS_FMT_SGRBG8_1X8:
+	case MEDIA_BUS_FMT_SRGGB8_1X8:
+		return 8;
+	case MEDIA_BUS_FMT_SBGGR10_1X10:
+	case MEDIA_BUS_FMT_SGBRG10_1X10:
+	case MEDIA_BUS_FMT_SGRBG10_1X10:
+	case MEDIA_BUS_FMT_SRGGB10_1X10:
+		return 10;
+	case MEDIA_BUS_FMT_SBGGR12_1X12:
+	case MEDIA_BUS_FMT_SGBRG12_1X12:
+	case MEDIA_BUS_FMT_SGRBG12_1X12:
+	case MEDIA_BUS_FMT_SRGGB12_1X12:
+		return 12;
+	case MEDIA_BUS_FMT_UYVY8_1X16:
+		return 16;
+	case MEDIA_BUS_FMT_BGR888_1X24:
+		return 24;
+	default:
+		return 0;
+	}
+}
+
+static u8 data_type_from_code(__u32 code)
+{
+	switch (code) {
+	case MEDIA_BUS_FMT_SBGGR8_1X8:
+	case MEDIA_BUS_FMT_SGBRG8_1X8:
+	case MEDIA_BUS_FMT_SGRBG8_1X8:
+	case MEDIA_BUS_FMT_SRGGB8_1X8:
+		return 0x2a;
+	case MEDIA_BUS_FMT_SBGGR10_1X10:
+	case MEDIA_BUS_FMT_SGBRG10_1X10:
+	case MEDIA_BUS_FMT_SGRBG10_1X10:
+	case MEDIA_BUS_FMT_SRGGB10_1X10:
+		return 0x2b;
+	case MEDIA_BUS_FMT_SBGGR12_1X12:
+	case MEDIA_BUS_FMT_SGBRG12_1X12:
+	case MEDIA_BUS_FMT_SGRBG12_1X12:
+	case MEDIA_BUS_FMT_SRGGB12_1X12:
+		return 0x2c;
+	case MEDIA_BUS_FMT_UYVY8_1X16:
+		return 0x1e;
+	case MEDIA_BUS_FMT_BGR888_1X24:
+		return 0x24;
+	default:
+		return 0;
+	}
+}
+
+static void init_format(struct v4l2_mbus_framefmt *fmt)
+{
+	fmt->code = MEDIA_BUS_FMT_SBGGR8_1X8;
+	fmt->field = V4L2_FIELD_NONE;
+	fmt->colorspace = V4L2_COLORSPACE_SRGB;
+	fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(V4L2_COLORSPACE_SRGB);
+	fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
+	fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(V4L2_COLORSPACE_SRGB);
+	fmt->width = 640;
+	fmt->height = 480;
+}
+
+static __u32 get_fmt_code(__u32 code)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(mipid02_supported_fmt_codes); i++) {
+		if (code == mipid02_supported_fmt_codes[i])
+			return code;
+	}
+
+	return mipid02_supported_fmt_codes[0];
+}
+
+static __u32 serial_to_parallel_code(__u32 serial)
+{
+	if (serial == MEDIA_BUS_FMT_UYVY8_1X16)
+		return MEDIA_BUS_FMT_UYVY8_2X8;
+	if (serial == MEDIA_BUS_FMT_BGR888_1X24)
+		return MEDIA_BUS_FMT_BGR888_3X8;
+
+	return serial;
+}
+
+static inline struct mipid02_dev *to_mipid02_dev(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct mipid02_dev, sd);
+}
+
+static int mipid02_read_reg(struct mipid02_dev *bridge, u16 reg, u8 *val)
+{
+	struct i2c_client *client = bridge->i2c_client;
+	struct i2c_msg msg[2];
+	u8 buf[2];
+	int ret;
+
+	buf[0] = reg >> 8;
+	buf[1] = reg & 0xff;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = client->flags;
+	msg[0].buf = buf;
+	msg[0].len = sizeof(buf);
+
+	msg[1].addr = client->addr;
+	msg[1].flags = client->flags | I2C_M_RD;
+	msg[1].buf = val;
+	msg[1].len = 1;
+
+	ret = i2c_transfer(client->adapter, msg, 2);
+	if (ret < 0) {
+		dev_dbg(&client->dev, "%s: %x i2c_transfer, reg: %x => %d\n",
+			    __func__, client->addr, reg, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int mipid02_write_reg(struct mipid02_dev *bridge, u16 reg, u8 val)
+{
+	struct i2c_client *client = bridge->i2c_client;
+	struct i2c_msg msg;
+	u8 buf[3];
+	int ret;
+
+	buf[0] = reg >> 8;
+	buf[1] = reg & 0xff;
+	buf[2] = val;
+
+	msg.addr = client->addr;
+	msg.flags = client->flags;
+	msg.buf = buf;
+	msg.len = sizeof(buf);
+
+	ret = i2c_transfer(client->adapter, &msg, 1);
+	if (ret < 0) {
+		dev_dbg(&client->dev, "%s: i2c_transfer, reg: %x => %d\n",
+			    __func__, reg, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int mipid02_get_regulators(struct mipid02_dev *bridge)
+{
+	unsigned int i;
+
+	for (i = 0; i < MIPID02_NUM_SUPPLIES; i++)
+		bridge->supplies[i].supply = mipid02_supply_name[i];
+
+	return devm_regulator_bulk_get(&bridge->i2c_client->dev,
+				       MIPID02_NUM_SUPPLIES,
+				       bridge->supplies);
+}
+
+static void mipid02_apply_reset(struct mipid02_dev *bridge)
+{
+	gpiod_set_value_cansleep(bridge->reset_gpio, 0);
+	usleep_range(5000, 10000);
+	gpiod_set_value_cansleep(bridge->reset_gpio, 1);
+	usleep_range(5000, 10000);
+	gpiod_set_value_cansleep(bridge->reset_gpio, 0);
+	usleep_range(5000, 10000);
+}
+
+static int mipid02_set_power_on(struct mipid02_dev *bridge)
+{
+	struct i2c_client *client = bridge->i2c_client;
+	int ret;
+
+	ret = clk_prepare_enable(bridge->xclk);
+	if (ret) {
+		dev_err(&client->dev, "%s: failed to enable clock\n", __func__);
+		return ret;
+	}
+
+	ret = regulator_bulk_enable(MIPID02_NUM_SUPPLIES,
+				    bridge->supplies);
+	if (ret) {
+		dev_err(&client->dev, "%s: failed to enable regulators\n",
+			    __func__);
+		goto xclk_off;
+	}
+
+	if (bridge->reset_gpio) {
+		dev_dbg(&client->dev, "apply reset");
+		mipid02_apply_reset(bridge);
+	} else {
+		dev_dbg(&client->dev, "don't apply reset");
+		usleep_range(5000, 10000);
+	}
+
+	return 0;
+
+xclk_off:
+	clk_disable_unprepare(bridge->xclk);
+	return ret;
+}
+
+static void mipid02_set_power_off(struct mipid02_dev *bridge)
+{
+	regulator_bulk_disable(MIPID02_NUM_SUPPLIES, bridge->supplies);
+	clk_disable_unprepare(bridge->xclk);
+}
+
+static int mipid02_detect(struct mipid02_dev *bridge)
+{
+	u8 reg;
+
+	/*
+	 * There is no version registers. Just try to read register
+	 * MIPID02_CLK_LANE_WR_REG1.
+	 */
+	return mipid02_read_reg(bridge, MIPID02_CLK_LANE_WR_REG1, &reg);
+}
+
+static u32 mipid02_get_link_freq_from_cid_pixel_rate(struct mipid02_dev *bridge,
+						     struct v4l2_subdev *subdev)
+{
+	struct v4l2_fwnode_endpoint *ep = &bridge->rx;
+	struct v4l2_ctrl *ctrl;
+	u32 pixel_clock;
+	u32 bpp = bpp_from_code(bridge->fmt.code);
+
+	ctrl = v4l2_ctrl_find(subdev->ctrl_handler, V4L2_CID_PIXEL_RATE);
+	if (!ctrl)
+		return 0;
+	pixel_clock = v4l2_ctrl_g_ctrl_int64(ctrl);
+
+	return pixel_clock * bpp / (2 * ep->bus.mipi_csi2.num_data_lanes);
+}
+
+/*
+ * We need to know link frequency to setup clk_lane_reg1 timings. Link frequency
+ * will be computed using connected device V4L2_CID_PIXEL_RATE, bit per pixel
+ * and number of lanes.
+ */
+static int mipid02_configure_from_rx_speed(struct mipid02_dev *bridge)
+{
+	struct i2c_client *client = bridge->i2c_client;
+	struct v4l2_subdev *subdev = bridge->s_subdev;
+	u32 link_freq;
+
+	link_freq = mipid02_get_link_freq_from_cid_pixel_rate(bridge, subdev);
+	if (!link_freq) {
+		dev_err(&client->dev, "Failed to detect link frequency");
+		return -EINVAL;
+	}
+
+	dev_dbg(&client->dev, "detect link_freq = %d Hz", link_freq);
+	bridge->r.clk_lane_reg1 |= (2000000000 / link_freq) << 2;
+
+	return 0;
+}
+
+static int mipid02_configure_clk_lane(struct mipid02_dev *bridge)
+{
+	struct i2c_client *client = bridge->i2c_client;
+	struct v4l2_fwnode_endpoint *ep = &bridge->rx;
+	bool *polarities = ep->bus.mipi_csi2.lane_polarities;
+
+	/* midid02 doesn't support clock lane remapping */
+	if (ep->bus.mipi_csi2.clock_lane != 0) {
+		dev_err(&client->dev, "clk lane must be map to lane 0\n");
+		return -EINVAL;
+	}
+	bridge->r.clk_lane_reg1 |= (polarities[0] << 1) | CLK_ENABLE;
+
+	return 0;
+}
+
+static int mipid02_configure_data0_lane(struct mipid02_dev *bridge, int nb,
+					bool are_lanes_swap, bool *polarities)
+{
+	bool are_pin_swap = are_lanes_swap ? polarities[2] : polarities[1];
+
+	if (nb == 1 && are_lanes_swap)
+		return 0;
+
+	/*
+	 * data lane 0 as pin swap polarity reversed compared to clock and
+	 * data lane 1
+	 */
+	if (!are_pin_swap)
+		bridge->r.data_lane0_reg1 = 1 << 1;
+	bridge->r.data_lane0_reg1 |= DATA_ENABLE;
+
+	return 0;
+}
+
+static int mipid02_configure_data1_lane(struct mipid02_dev *bridge, int nb,
+					bool are_lanes_swap, bool *polarities)
+{
+	bool are_pin_swap = are_lanes_swap ? polarities[1] : polarities[2];
+
+	if (nb == 1 && !are_lanes_swap)
+		return 0;
+
+	if (are_pin_swap)
+		bridge->r.data_lane1_reg1 = 1 << 1;
+	bridge->r.data_lane1_reg1 |= DATA_ENABLE;
+
+	return 0;
+}
+
+static int mipid02_configure_from_rx(struct mipid02_dev *bridge)
+{
+	struct v4l2_fwnode_endpoint *ep = &bridge->rx;
+	bool are_lanes_swap = ep->bus.mipi_csi2.data_lanes[0] == 2;
+	bool *polarities = ep->bus.mipi_csi2.lane_polarities;
+	int nb = ep->bus.mipi_csi2.num_data_lanes;
+	int ret;
+
+	ret = mipid02_configure_clk_lane(bridge);
+	if (ret)
+		return ret;
+
+	ret = mipid02_configure_data0_lane(bridge, nb, are_lanes_swap,
+					   polarities);
+	if (ret)
+		return ret;
+
+	ret = mipid02_configure_data1_lane(bridge, nb, are_lanes_swap,
+					   polarities);
+	if (ret)
+		return ret;
+
+	bridge->r.mode_reg1 |= are_lanes_swap ? MODE_DATA_SWAP : 0;
+	bridge->r.mode_reg1 |= (nb - 1) << 1;
+
+	return mipid02_configure_from_rx_speed(bridge);
+}
+
+static int mipid02_configure_from_tx(struct mipid02_dev *bridge)
+{
+	struct v4l2_fwnode_endpoint *ep = &bridge->tx;
+
+	bridge->r.pix_width_ctrl = ep->bus.parallel.bus_width;
+	bridge->r.pix_width_ctrl_emb = ep->bus.parallel.bus_width;
+	if (ep->bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
+		bridge->r.mode_reg2 |= MODE_HSYNC_ACTIVE_HIGH;
+	if (ep->bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
+		bridge->r.mode_reg2 |= MODE_VSYNC_ACTIVE_HIGH;
+
+	return 0;
+}
+
+static int mipid02_configure_from_code(struct mipid02_dev *bridge)
+{
+	u8 data_type;
+
+	bridge->r.data_id_rreg = 0;
+	data_type = data_type_from_code(bridge->fmt.code);
+	if (!data_type)
+		return -EINVAL;
+	bridge->r.data_id_rreg = data_type;
+
+	return 0;
+}
+
+static int mipid02_stream_disable(struct mipid02_dev *bridge)
+{
+	struct i2c_client *client = bridge->i2c_client;
+	int ret;
+
+	/* Disable all lanes */
+	ret = mipid02_write_reg(bridge, MIPID02_CLK_LANE_REG1, 0);
+	if (ret)
+		goto error;
+	ret = mipid02_write_reg(bridge, MIPID02_DATA_LANE0_REG1, 0);
+	if (ret)
+		goto error;
+	ret = mipid02_write_reg(bridge, MIPID02_DATA_LANE1_REG1, 0);
+	if (ret)
+		goto error;
+error:
+	if (ret)
+		dev_err(&client->dev, "failed to stream off %d", ret);
+
+	return ret;
+}
+
+static int mipid02_stream_enable(struct mipid02_dev *bridge)
+{
+	struct i2c_client *client = bridge->i2c_client;
+	int ret = -EINVAL;
+
+	if (!bridge->s_subdev)
+		goto error;
+
+	memset(&bridge->r, 0, sizeof(bridge->r));
+	/* build registers content */
+	ret = mipid02_configure_from_rx(bridge);
+	if (ret)
+		goto error;
+	ret = mipid02_configure_from_tx(bridge);
+	if (ret)
+		goto error;
+	ret = mipid02_configure_from_code(bridge);
+	if (ret)
+		goto error;
+
+	/* write mipi registers */
+	ret = mipid02_write_reg(bridge, MIPID02_CLK_LANE_REG1,
+		bridge->r.clk_lane_reg1);
+	if (ret)
+		goto error;
+	ret = mipid02_write_reg(bridge, MIPID02_CLK_LANE_REG3, CLK_MIPI_CSI);
+	if (ret)
+		goto error;
+	ret = mipid02_write_reg(bridge, MIPID02_DATA_LANE0_REG1,
+		bridge->r.data_lane0_reg1);
+	if (ret)
+		goto error;
+	ret = mipid02_write_reg(bridge, MIPID02_DATA_LANE0_REG2,
+		DATA_MIPI_CSI);
+	if (ret)
+		goto error;
+	ret = mipid02_write_reg(bridge, MIPID02_DATA_LANE1_REG1,
+		bridge->r.data_lane1_reg1);
+	if (ret)
+		goto error;
+	ret = mipid02_write_reg(bridge, MIPID02_DATA_LANE1_REG2,
+		DATA_MIPI_CSI);
+	if (ret)
+		goto error;
+	ret = mipid02_write_reg(bridge, MIPID02_MODE_REG1,
+		MODE_NO_BYPASS | bridge->r.mode_reg1);
+	if (ret)
+		goto error;
+	ret = mipid02_write_reg(bridge, MIPID02_MODE_REG2,
+		bridge->r.mode_reg2);
+	if (ret)
+		goto error;
+	ret = mipid02_write_reg(bridge, MIPID02_DATA_ID_RREG,
+		bridge->r.data_id_rreg);
+	if (ret)
+		goto error;
+	ret = mipid02_write_reg(bridge, MIPID02_DATA_SELECTION_CTRL,
+		SELECTION_MANUAL_DATA | SELECTION_MANUAL_WIDTH);
+	if (ret)
+		goto error;
+	ret = mipid02_write_reg(bridge, MIPID02_PIX_WIDTH_CTRL,
+		bridge->r.pix_width_ctrl);
+	if (ret)
+		goto error;
+	ret = mipid02_write_reg(bridge, MIPID02_PIX_WIDTH_CTRL_EMB,
+		bridge->r.pix_width_ctrl_emb);
+	if (ret)
+		goto error;
+
+	return 0;
+
+error:
+	dev_err(&client->dev, "failed to stream on %d", ret);
+	mipid02_stream_disable(bridge);
+
+	return ret;
+}
+
+static int mipid02_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct mipid02_dev *bridge = to_mipid02_dev(sd);
+	struct i2c_client *client = bridge->i2c_client;
+	int ret = 0;
+
+	dev_dbg(&client->dev, "%s : requested %d / current = %d", __func__,
+		    enable, bridge->streaming);
+	mutex_lock(&bridge->lock);
+
+	if (bridge->streaming == enable)
+		goto out;
+
+	ret = enable ? mipid02_stream_enable(bridge) :
+		       mipid02_stream_disable(bridge);
+	if (!ret)
+		bridge->streaming = enable;
+
+out:
+	dev_dbg(&client->dev, "%s current now = %d / %d", __func__,
+		    bridge->streaming, ret);
+	mutex_unlock(&bridge->lock);
+
+	return ret;
+}
+
+static int mipid02_enum_mbus_code(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_pad_config *cfg,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct mipid02_dev *bridge = to_mipid02_dev(sd);
+	int ret = 0;
+
+	switch (code->pad) {
+	case MIPID02_SINK_0:
+		if (code->index >= ARRAY_SIZE(mipid02_supported_fmt_codes))
+			ret = -EINVAL;
+		else
+			code->code = mipid02_supported_fmt_codes[code->index];
+		break;
+	case MIPID02_SOURCE:
+		if (code->index == 0)
+			code->code = serial_to_parallel_code(bridge->fmt.code);
+		else
+			ret = -EINVAL;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int mipid02_get_fmt(struct v4l2_subdev *sd,
+			   struct v4l2_subdev_pad_config *cfg,
+			   struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
+	struct mipid02_dev *bridge = to_mipid02_dev(sd);
+	struct i2c_client *client = bridge->i2c_client;
+	struct v4l2_mbus_framefmt *fmt;
+
+	dev_dbg(&client->dev, "%s probe %d", __func__, format->pad);
+
+	if (format->pad >= MIPID02_PAD_NB)
+		return -EINVAL;
+	/* second CSI-2 pad not yet supported */
+	if (format->pad == MIPID02_SINK_1)
+		return -EINVAL;
+
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY)
+		fmt = v4l2_subdev_get_try_format(&bridge->sd, cfg, format->pad);
+	else
+		fmt = &bridge->fmt;
+
+	mutex_lock(&bridge->lock);
+
+	*mbus_fmt = *fmt;
+	/* code may need to be converted for source */
+	if (format->pad == MIPID02_SOURCE)
+		mbus_fmt->code = serial_to_parallel_code(mbus_fmt->code);
+
+	mutex_unlock(&bridge->lock);
+
+	return 0;
+}
+
+static void mipid02_set_fmt_source(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_pad_config *cfg,
+				   struct v4l2_subdev_format *format)
+{
+	struct mipid02_dev *bridge = to_mipid02_dev(sd);
+
+	/* source pad mirror active sink pad */
+	format->format = bridge->fmt;
+	/* but code may need to be converted */
+	format->format.code = serial_to_parallel_code(format->format.code);
+
+	/* only apply format for V4L2_SUBDEV_FORMAT_TRY case */
+	if (format->which != V4L2_SUBDEV_FORMAT_TRY)
+		return;
+
+	*v4l2_subdev_get_try_format(sd, cfg, format->pad) = format->format;
+}
+
+static void mipid02_set_fmt_sink(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_pad_config *cfg,
+				 struct v4l2_subdev_format *format)
+{
+	struct mipid02_dev *bridge = to_mipid02_dev(sd);
+	struct v4l2_mbus_framefmt *fmt;
+
+	format->format.code = get_fmt_code(format->format.code);
+
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY)
+		fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
+	else
+		fmt = &bridge->fmt;
+
+	*fmt = format->format;
+}
+
+static int mipid02_set_fmt(struct v4l2_subdev *sd,
+			   struct v4l2_subdev_pad_config *cfg,
+			   struct v4l2_subdev_format *format)
+{
+	struct mipid02_dev *bridge = to_mipid02_dev(sd);
+	struct i2c_client *client = bridge->i2c_client;
+	int ret = 0;
+
+	dev_dbg(&client->dev, "%s for %d", __func__, format->pad);
+
+	if (format->pad >= MIPID02_PAD_NB)
+		return -EINVAL;
+	/* second CSI-2 pad not yet supported */
+	if (format->pad == MIPID02_SINK_1)
+		return -EINVAL;
+
+	mutex_lock(&bridge->lock);
+
+	if (bridge->streaming) {
+		ret = -EBUSY;
+		goto error;
+	}
+
+	if (format->pad == MIPID02_SOURCE)
+		mipid02_set_fmt_source(sd, cfg, format);
+	else
+		mipid02_set_fmt_sink(sd, cfg, format);
+
+error:
+	mutex_unlock(&bridge->lock);
+
+	return ret;
+}
+
+static const struct v4l2_subdev_video_ops mipid02_video_ops = {
+	.s_stream = mipid02_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops mipid02_pad_ops = {
+	.enum_mbus_code = mipid02_enum_mbus_code,
+	.get_fmt = mipid02_get_fmt,
+	.set_fmt = mipid02_set_fmt,
+};
+
+static const struct v4l2_subdev_ops mipid02_subdev_ops = {
+	.video = &mipid02_video_ops,
+	.pad = &mipid02_pad_ops,
+};
+
+static const struct media_entity_operations mipid02_subdev_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static int mipid02_async_bound(struct v4l2_async_notifier *notifier,
+			       struct v4l2_subdev *s_subdev,
+			       struct v4l2_async_subdev *asd)
+{
+	struct mipid02_dev *bridge = to_mipid02_dev(notifier->sd);
+	struct i2c_client *client = bridge->i2c_client;
+	int source_pad;
+	int ret;
+
+	dev_dbg(&client->dev, "sensor_async_bound call %p", s_subdev);
+
+	source_pad = media_entity_get_fwnode_pad(&s_subdev->entity,
+						 s_subdev->fwnode,
+						 MEDIA_PAD_FL_SOURCE);
+	if (source_pad < 0) {
+		dev_err(&client->dev, "Couldn't find output pad for subdev %s\n",
+			s_subdev->name);
+		return source_pad;
+	}
+
+	ret = media_create_pad_link(&s_subdev->entity, source_pad,
+				    &bridge->sd.entity, 0,
+				    MEDIA_LNK_FL_ENABLED |
+				    MEDIA_LNK_FL_IMMUTABLE);
+	if (ret) {
+		dev_err(&client->dev, "Couldn't create media link %d", ret);
+		return ret;
+	}
+
+	bridge->s_subdev = s_subdev;
+
+	return 0;
+}
+
+static void mipid02_async_unbind(struct v4l2_async_notifier *notifier,
+				 struct v4l2_subdev *s_subdev,
+				 struct v4l2_async_subdev *asd)
+{
+	struct mipid02_dev *bridge = to_mipid02_dev(notifier->sd);
+
+	bridge->s_subdev = NULL;
+}
+
+static const struct v4l2_async_notifier_operations mipid02_notifier_ops = {
+	.bound		= mipid02_async_bound,
+	.unbind		= mipid02_async_unbind,
+};
+
+static int mipid02_parse_rx_ep(struct mipid02_dev *bridge)
+{
+	struct v4l2_fwnode_endpoint ep = { .bus_type = V4L2_MBUS_CSI2_DPHY };
+	struct i2c_client *client = bridge->i2c_client;
+	struct device_node *ep_node;
+	int ret;
+
+	/* parse rx (endpoint 0) */
+	ep_node = of_graph_get_endpoint_by_regs(bridge->i2c_client->dev.of_node,
+						0, 0);
+	if (!ep_node) {
+		dev_err(&client->dev, "unable to find port0 ep");
+		ret = -EINVAL;
+		goto error;
+	}
+
+	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), &ep);
+	if (ret) {
+		dev_err(&client->dev, "Could not parse v4l2 endpoint %d\n",
+			ret);
+		goto error_of_node_put;
+	}
+
+	/* do some sanity checks */
+	if (ep.bus.mipi_csi2.num_data_lanes > 2) {
+		dev_err(&client->dev, "max supported data lanes is 2 / got %d",
+			ep.bus.mipi_csi2.num_data_lanes);
+		ret = -EINVAL;
+		goto error_of_node_put;
+	}
+
+	/* register it for later use */
+	bridge->rx = ep;
+
+	/* register async notifier so we get noticed when sensor is connected */
+	bridge->asd.match.fwnode =
+		fwnode_graph_get_remote_port_parent(of_fwnode_handle(ep_node));
+	bridge->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
+	of_node_put(ep_node);
+
+	v4l2_async_notifier_init(&bridge->notifier);
+	ret = v4l2_async_notifier_add_subdev(&bridge->notifier, &bridge->asd);
+	if (ret) {
+		dev_err(&client->dev, "fail to register asd to notifier %d",
+			ret);
+		fwnode_handle_put(bridge->asd.match.fwnode);
+		return ret;
+	}
+	bridge->notifier.ops = &mipid02_notifier_ops;
+
+	ret = v4l2_async_subdev_notifier_register(&bridge->sd,
+						  &bridge->notifier);
+	if (ret)
+		v4l2_async_notifier_cleanup(&bridge->notifier);
+
+	return ret;
+
+error_of_node_put:
+	of_node_put(ep_node);
+error:
+
+	return ret;
+}
+
+static int mipid02_parse_tx_ep(struct mipid02_dev *bridge)
+{
+	struct v4l2_fwnode_endpoint ep = { .bus_type = V4L2_MBUS_PARALLEL };
+	struct i2c_client *client = bridge->i2c_client;
+	struct device_node *ep_node;
+	int ret;
+
+	/* parse tx (endpoint 2) */
+	ep_node = of_graph_get_endpoint_by_regs(bridge->i2c_client->dev.of_node,
+						2, 0);
+	if (!ep_node) {
+		dev_err(&client->dev, "unable to find port1 ep");
+		ret = -EINVAL;
+		goto error;
+	}
+
+	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), &ep);
+	if (ret) {
+		dev_err(&client->dev, "Could not parse v4l2 endpoint\n");
+		goto error_of_node_put;
+	}
+
+	of_node_put(ep_node);
+	bridge->tx = ep;
+
+	return 0;
+
+error_of_node_put:
+	of_node_put(ep_node);
+error:
+
+	return -EINVAL;
+}
+
+static int mipid02_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct mipid02_dev *bridge;
+	u32 clk_freq;
+	int ret;
+
+	bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL);
+	if (!bridge)
+		return -ENOMEM;
+
+	init_format(&bridge->fmt);
+
+	bridge->i2c_client = client;
+	v4l2_i2c_subdev_init(&bridge->sd, client, &mipid02_subdev_ops);
+
+	/* got and check clock */
+	bridge->xclk = devm_clk_get(dev, "xclk");
+	if (IS_ERR(bridge->xclk)) {
+		dev_err(dev, "failed to get xclk\n");
+		return PTR_ERR(bridge->xclk);
+	}
+
+	clk_freq = clk_get_rate(bridge->xclk);
+	if (clk_freq < 6000000 || clk_freq > 27000000) {
+		dev_err(dev, "xclk freq must be in 6-27 Mhz range. got %d Hz\n",
+			clk_freq);
+		return -EINVAL;
+	}
+
+	bridge->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						     GPIOD_OUT_HIGH);
+
+	ret = mipid02_get_regulators(bridge);
+	if (ret) {
+		dev_err(dev, "failed to get regulators %d", ret);
+		return ret;
+	}
+
+	mutex_init(&bridge->lock);
+	bridge->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	bridge->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+	bridge->sd.entity.ops = &mipid02_subdev_entity_ops;
+	bridge->pad[0].flags = MEDIA_PAD_FL_SINK;
+	bridge->pad[1].flags = MEDIA_PAD_FL_SINK;
+	bridge->pad[2].flags = MEDIA_PAD_FL_SOURCE;
+	ret = media_entity_pads_init(&bridge->sd.entity, MIPID02_PAD_NB,
+				     bridge->pad);
+	if (ret) {
+		dev_err(&client->dev, "pads init failed %d", ret);
+		goto mutex_cleanup;
+	}
+
+	/* enable clock, power and reset device if available */
+	ret = mipid02_set_power_on(bridge);
+	if (ret)
+		goto entity_cleanup;
+
+	ret = mipid02_detect(bridge);
+	if (ret) {
+		dev_err(&client->dev, "failed to detect mipid02 %d", ret);
+		goto power_off;
+	}
+
+	ret = mipid02_parse_tx_ep(bridge);
+	if (ret) {
+		dev_err(&client->dev, "failed to parse tx %d", ret);
+		goto power_off;
+	}
+
+	ret = mipid02_parse_rx_ep(bridge);
+	if (ret) {
+		dev_err(&client->dev, "failed to parse rx %d", ret);
+		goto power_off;
+	}
+
+	ret = v4l2_async_register_subdev(&bridge->sd);
+	if (ret < 0) {
+		dev_err(&client->dev, "v4l2_async_register_subdev failed %d",
+			    ret);
+		goto unregister_notifier;
+	}
+
+	dev_info(&client->dev, "mipid02 device probe successfully");
+
+	return 0;
+
+unregister_notifier:
+	v4l2_async_notifier_unregister(&bridge->notifier);
+	v4l2_async_notifier_cleanup(&bridge->notifier);
+power_off:
+	mipid02_set_power_off(bridge);
+entity_cleanup:
+	media_entity_cleanup(&bridge->sd.entity);
+mutex_cleanup:
+	mutex_destroy(&bridge->lock);
+
+	return ret;
+}
+
+static int mipid02_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct mipid02_dev *bridge = to_mipid02_dev(sd);
+
+	v4l2_async_notifier_unregister(&bridge->notifier);
+	v4l2_async_notifier_cleanup(&bridge->notifier);
+	v4l2_async_unregister_subdev(&bridge->sd);
+	mipid02_set_power_off(bridge);
+	media_entity_cleanup(&bridge->sd.entity);
+	mutex_destroy(&bridge->lock);
+
+	return 0;
+}
+
+static const struct of_device_id mipid02_dt_ids[] = {
+	{ .compatible = "st,st-mipid02" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mipid02_dt_ids);
+
+static struct i2c_driver mipid02_i2c_driver = {
+	.driver = {
+		.name  = "st-mipid02",
+		.of_match_table = mipid02_dt_ids,
+	},
+	.probe_new = mipid02_probe,
+	.remove = mipid02_remove,
+};
+
+module_i2c_driver(mipid02_i2c_driver);
+
+MODULE_AUTHOR("Mickael Guene <mickael.guene@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics MIPID02 CSI-2 bridge driver");
+MODULE_LICENSE("GPL v2");