Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (345 commits)
  V4L/DVB (13542): ir-keytable: Allow dynamic table change
  V4L/DVB (13541): atbm8830: replace 64-bit division and floating point usage
  V4L/DVB (13540): ir-common: Cleanup get key evdev code
  V4L/DVB (13539): ir-common: add __func__ for debug messages
  V4L/DVB (13538): ir-common: Use a dynamic keycode table
  V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocation
  V4L/DVB (13536): em28xx: Use the full RC5 code on HVR-950 Remote Controller
  V4L/DVB (13535): ir-common: Add a hauppauge new table with the complete RC5 code
  V4L/DVB (13534): ir-common: Remove some unused fields/structs
  V4L/DVB (13533): ir: use dynamic tables, instead of static ones
  V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table
  V4L/DVB (13531): ir-common: rename the debug routine to allow exporting it
  V4L/DVB (13458): go7007: subdev conversion
  V4L/DVB (13457): s2250: subdev conversion
  V4L/DVB (13456): s2250: Change module structure
  V4L/DVB (13528): em28xx: add support for em2800 VC211A card
  em28xx: don't reduce scale to half size for em2800
  em28xx: don't load audio modules when AC97 is mis-detected
  em28xx: em2800 chips support max width of 640
  V4L/DVB (13523): dvb-bt8xx: fix compile warning
  ...

Fix up trivial conflicts due to spelling fixes from the trivial tree in
	Documentation/video4linux/gspca.txt
	drivers/media/video/cx18/cx18-mailbox.h

1 files changed, 43 insertions, 7 deletions

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index c0fd5c6feeac..82da205047be 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -225,6 +225,14 @@ static struct em28xx_reg_seq silvercrest_reg_seq[] = {
 	{	-1,		-1,	-1,		-1},
 };
 
+static struct em28xx_reg_seq vc211a_enable[] = {
+	{EM28XX_R08_GPIO,	0xff,	0x07,		10},
+	{EM28XX_R08_GPIO,	0xff,	0x0f,		10},
+	{EM28XX_R08_GPIO,	0xff,	0x0b,		10},
+	{	-1,		-1,	-1,		-1},
+};
+
+
 /*
  *  Board definitions
  */
@@ -829,7 +837,7 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware   = 1,
 		.has_dvb        = 1,
 		.dvb_gpio       = hauppauge_wintv_hvr_900_digital,
-		.ir_codes       = &ir_codes_hauppauge_new_table,
+		.ir_codes       = &ir_codes_rc5_hauppauge_new_table,
 		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -1009,6 +1017,23 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
+	[EM2800_BOARD_VC211A] = {
+		.name         = "Actionmaster/LinXcel/Digitus VC211A",
+		.is_em2800    = 1,
+		.tuner_type   = TUNER_ABSENT,	/* Capture-only board */
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
+			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = vc211a_enable,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = SAA7115_SVIDEO3,
+			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = vc211a_enable,
+		} },
+	},
 	[EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
 		.name         = "Leadtek Winfast USB II",
 		.is_em2800    = 1,
@@ -1381,10 +1406,14 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
 		.name         = "Terratec Hybrid XS (em2882)",
-		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.tuner_type   = TUNER_XC2028,
 		.tuner_gpio   = default_tuner_gpio,
+		.mts_firmware = 1,
 		.decoder      = EM28XX_TVP5150,
+		.has_dvb      = 1,
+		.dvb_gpio     = hauppauge_wintv_hvr_900_digital,
+		.ir_codes     = &ir_codes_terratec_cinergy_xs_table,
+		.xclk         = EM28XX_XCLK_FREQUENCY_12MHZ,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
@@ -1608,6 +1637,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2861),
 			.driver_info = EM2820_BOARD_UNKNOWN },
+	{ USB_DEVICE(0xeb1a, 0x2862),
+			.driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2870),
 			.driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2881),
@@ -2050,6 +2081,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 	switch (dev->model) {
 	case EM2880_BOARD_EMPIRE_DUAL_TV:
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+	case EM2882_BOARD_TERRATEC_HYBRID_XS:
 		ctl->demod = XC3028_FE_ZARLINK456;
 		break;
 	case EM2880_BOARD_TERRATEC_HYBRID_XS:
@@ -2227,6 +2259,7 @@ static int em28xx_hint_board(struct em28xx *dev)
 /* ----------------------------------------------------------------------- */
 void em28xx_register_i2c_ir(struct em28xx *dev)
 {
+	struct i2c_board_info info;
 	const unsigned short addr_list[] = {
 		 0x30, 0x47, I2C_CLIENT_END
 	};
@@ -2234,9 +2267,9 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
 	if (disable_ir)
 		return;
 
-	memset(&dev->info, 0, sizeof(&dev->info));
+	memset(&info, 0, sizeof(struct i2c_board_info));
 	memset(&dev->init_data, 0, sizeof(dev->init_data));
-	strlcpy(dev->info.type, "ir_video", I2C_NAME_SIZE);
+	strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
 
 	/* detect & configure */
 	switch (dev->model) {
@@ -2259,8 +2292,8 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
 	}
 
 	if (dev->init_data.name)
-		dev->info.platform_data = &dev->init_data;
-	i2c_new_probed_device(&dev->i2c_adap, &dev->info, addr_list);
+		info.platform_data = &dev->init_data;
+	i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
 }
 
 void em28xx_card_setup(struct em28xx *dev)
@@ -2524,6 +2557,9 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 		dev->chip_id = retval;
 
 		switch (dev->chip_id) {
+		case CHIP_ID_EM2800:
+			em28xx_info("chip ID is em2800\n");
+			break;
 		case CHIP_ID_EM2710:
 			em28xx_info("chip ID is em2710\n");
 			break;
@@ -2650,7 +2686,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	em28xx_init_extension(dev);
 
 	/* Save some power by putting tuner to sleep */
-	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
+	v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
 
 	return 0;