Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/usb/input/Makefile
	drivers/usb/input/gtco.c

1 files changed, 748 insertions, 0 deletions

diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
new file mode 100644
index 000000000000..50624c6a62a5
--- /dev/null
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -0,0 +1,748 @@
+/*
+    I2C functions
+    Copyright (C) 2003-2004  Kevin Thayer <nufan_wfk at yahoo.com>
+    Copyright (C) 2005-2007  Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+    This file includes an i2c implementation that was reverse engineered
+    from the Hauppauge windows driver.  Older ivtv versions used i2c-algo-bit,
+    which whilst fine under most circumstances, had trouble with the Zilog
+    CPU on the PVR-150 which handles IR functions (occasional inability to
+    communicate with the chip until it was reset) and also with the i2c
+    bus being completely unreachable when multiple PVR cards were present.
+
+    The implementation is very similar to i2c-algo-bit, but there are enough
+    subtle differences that the two are hard to merge.  The general strategy
+    employed by i2c-algo-bit is to use udelay() to implement the timing
+    when putting out bits on the scl/sda lines.  The general strategy taken
+    here is to poll the lines for state changes (see ivtv_waitscl and
+    ivtv_waitsda).  In addition there are small delays at various locations
+    which poll the SCL line 5 times (ivtv_scldelay).  I would guess that
+    since this is memory mapped I/O that the length of those delays is tied
+    to the PCI bus clock.  There is some extra code to do with recovery
+    and retries.  Since it is not known what causes the actual i2c problems
+    in the first place, the only goal if one was to attempt to use
+    i2c-algo-bit would be to try to make it follow the same code path.
+    This would be a lot of work, and I'm also not convinced that it would
+    provide a generic benefit to i2c-algo-bit.  Therefore consider this
+    an engineering solution -- not pretty, but it works.
+
+    Some more general comments about what we are doing:
+
+    The i2c bus is a 2 wire serial bus, with clock (SCL) and data (SDA)
+    lines.  To communicate on the bus (as a master, we don't act as a slave),
+    we first initiate a start condition (ivtv_start).  We then write the
+    address of the device that we want to communicate with, along with a flag
+    that indicates whether this is a read or a write.  The slave then issues
+    an ACK signal (ivtv_ack), which tells us that it is ready for reading /
+    writing.  We then proceed with reading or writing (ivtv_read/ivtv_write),
+    and finally issue a stop condition (ivtv_stop) to make the bus available
+    to other masters.
+
+    There is an additional form of transaction where a write may be
+    immediately followed by a read.  In this case, there is no intervening
+    stop condition.  (Only the msp3400 chip uses this method of data transfer).
+ */
+
+#include "ivtv-driver.h"
+#include "ivtv-cards.h"
+#include "ivtv-gpio.h"
+#include "ivtv-i2c.h"
+
+#include <media/ir-kbd-i2c.h>
+
+/* i2c implementation for cx23415/6 chip, ivtv project.
+ * Author: Kevin Thayer (nufan_wfk at yahoo.com)
+ */
+/* i2c stuff */
+#define IVTV_REG_I2C_SETSCL_OFFSET 0x7000
+#define IVTV_REG_I2C_SETSDA_OFFSET 0x7004
+#define IVTV_REG_I2C_GETSCL_OFFSET 0x7008
+#define IVTV_REG_I2C_GETSDA_OFFSET 0x700c
+
+#ifndef I2C_ADAP_CLASS_TV_ANALOG
+#define I2C_ADAP_CLASS_TV_ANALOG I2C_CLASS_TV_ANALOG
+#endif /* I2C_ADAP_CLASS_TV_ANALOG */
+
+#define IVTV_CS53L32A_I2C_ADDR		0x11
+#define IVTV_CX25840_I2C_ADDR 		0x44
+#define IVTV_SAA7115_I2C_ADDR 		0x21
+#define IVTV_SAA7127_I2C_ADDR 		0x44
+#define IVTV_SAA717x_I2C_ADDR 		0x21
+#define IVTV_MSP3400_I2C_ADDR 		0x40
+#define IVTV_HAUPPAUGE_I2C_ADDR 	0x50
+#define IVTV_WM8739_I2C_ADDR 		0x1a
+#define IVTV_WM8775_I2C_ADDR		0x1b
+#define IVTV_TEA5767_I2C_ADDR		0x60
+#define IVTV_UPD64031A_I2C_ADDR 	0x12
+#define IVTV_UPD64083_I2C_ADDR 		0x5c
+#define IVTV_TDA985X_I2C_ADDR      	0x5b
+
+/* This array should match the IVTV_HW_ defines */
+static const u8 hw_driverids[] = {
+	I2C_DRIVERID_CX25840,
+	I2C_DRIVERID_SAA711X,
+	I2C_DRIVERID_SAA7127,
+	I2C_DRIVERID_MSP3400,
+	I2C_DRIVERID_TUNER,
+	I2C_DRIVERID_WM8775,
+	I2C_DRIVERID_CS53L32A,
+	I2C_DRIVERID_TVEEPROM,
+	I2C_DRIVERID_SAA711X,
+	I2C_DRIVERID_TVAUDIO,
+	I2C_DRIVERID_UPD64031A,
+	I2C_DRIVERID_UPD64083,
+	I2C_DRIVERID_SAA717X,
+	I2C_DRIVERID_WM8739,
+	0 		/* IVTV_HW_GPIO dummy driver ID */
+};
+
+/* This array should match the IVTV_HW_ defines */
+static const char * const hw_drivernames[] = {
+	"cx2584x",
+	"saa7115",
+	"saa7127",
+	"msp3400",
+	"tuner",
+	"wm8775",
+	"cs53l32a",
+	"tveeprom",
+	"saa7114",
+	"tvaudio",
+	"upd64031a",
+	"upd64083",
+	"saa717x",
+	"wm8739",
+	"gpio",
+};
+
+static int attach_inform(struct i2c_client *client)
+{
+	struct ivtv *itv = (struct ivtv *)i2c_get_adapdata(client->adapter);
+	int i;
+
+	IVTV_DEBUG_I2C("i2c client attach\n");
+	for (i = 0; i < I2C_CLIENTS_MAX; i++) {
+		if (itv->i2c_clients[i] == NULL) {
+			itv->i2c_clients[i] = client;
+			break;
+		}
+	}
+	if (i == I2C_CLIENTS_MAX) {
+		IVTV_ERR("insufficient room for new I2C client!\n");
+	}
+	return 0;
+}
+
+static int detach_inform(struct i2c_client *client)
+{
+	int i;
+	struct ivtv *itv = (struct ivtv *)i2c_get_adapdata(client->adapter);
+
+	IVTV_DEBUG_I2C("i2c client detach\n");
+	for (i = 0; i < I2C_CLIENTS_MAX; i++) {
+		if (itv->i2c_clients[i] == client) {
+			itv->i2c_clients[i] = NULL;
+			break;
+		}
+	}
+	IVTV_DEBUG_I2C("i2c detach [client=%s,%s]\n",
+		   client->name, (i < I2C_CLIENTS_MAX) ? "ok" : "failed");
+
+	return 0;
+}
+
+/* Set the serial clock line to the desired state */
+static void ivtv_setscl(struct ivtv *itv, int state)
+{
+	/* write them out */
+	/* write bits are inverted */
+	write_reg(~state, IVTV_REG_I2C_SETSCL_OFFSET);
+}
+
+/* Set the serial data line to the desired state */
+static void ivtv_setsda(struct ivtv *itv, int state)
+{
+	/* write them out */
+	/* write bits are inverted */
+	write_reg(~state & 1, IVTV_REG_I2C_SETSDA_OFFSET);
+}
+
+/* Read the serial clock line */
+static int ivtv_getscl(struct ivtv *itv)
+{
+	return read_reg(IVTV_REG_I2C_GETSCL_OFFSET) & 1;
+}
+
+/* Read the serial data line */
+static int ivtv_getsda(struct ivtv *itv)
+{
+	return read_reg(IVTV_REG_I2C_GETSDA_OFFSET) & 1;
+}
+
+/* Implement a short delay by polling the serial clock line */
+static void ivtv_scldelay(struct ivtv *itv)
+{
+	int i;
+
+	for (i = 0; i < 5; ++i)
+		ivtv_getscl(itv);
+}
+
+/* Wait for the serial clock line to become set to a specific value */
+static int ivtv_waitscl(struct ivtv *itv, int val)
+{
+	int i;
+
+	ivtv_scldelay(itv);
+	for (i = 0; i < 1000; ++i) {
+		if (ivtv_getscl(itv) == val)
+			return 1;
+	}
+	return 0;
+}
+
+/* Wait for the serial data line to become set to a specific value */
+static int ivtv_waitsda(struct ivtv *itv, int val)
+{
+	int i;
+
+	ivtv_scldelay(itv);
+	for (i = 0; i < 1000; ++i) {
+		if (ivtv_getsda(itv) == val)
+			return 1;
+	}
+	return 0;
+}
+
+/* Wait for the slave to issue an ACK */
+static int ivtv_ack(struct ivtv *itv)
+{
+	int ret = 0;
+
+	if (ivtv_getscl(itv) == 1) {
+		IVTV_DEBUG_I2C("SCL was high starting an ack\n");
+		ivtv_setscl(itv, 0);
+		if (!ivtv_waitscl(itv, 0)) {
+			IVTV_DEBUG_I2C("Could not set SCL low starting an ack\n");
+			return -EREMOTEIO;
+		}
+	}
+	ivtv_setsda(itv, 1);
+	ivtv_scldelay(itv);
+	ivtv_setscl(itv, 1);
+	if (!ivtv_waitsda(itv, 0)) {
+		IVTV_DEBUG_I2C("Slave did not ack\n");
+		ret = -EREMOTEIO;
+	}
+	ivtv_setscl(itv, 0);
+	if (!ivtv_waitscl(itv, 0)) {
+		IVTV_DEBUG_I2C("Failed to set SCL low after ACK\n");
+		ret = -EREMOTEIO;
+	}
+	return ret;
+}
+
+/* Write a single byte to the i2c bus and wait for the slave to ACK */
+static int ivtv_sendbyte(struct ivtv *itv, unsigned char byte)
+{
+	int i, bit;
+
+	IVTV_DEBUG_I2C("write %x\n",byte);
+	for (i = 0; i < 8; ++i, byte<<=1) {
+		ivtv_setscl(itv, 0);
+		if (!ivtv_waitscl(itv, 0)) {
+			IVTV_DEBUG_I2C("Error setting SCL low\n");
+			return -EREMOTEIO;
+		}
+		bit = (byte>>7)&1;
+		ivtv_setsda(itv, bit);
+		if (!ivtv_waitsda(itv, bit)) {
+			IVTV_DEBUG_I2C("Error setting SDA\n");
+			return -EREMOTEIO;
+		}
+		ivtv_setscl(itv, 1);
+		if (!ivtv_waitscl(itv, 1)) {
+			IVTV_DEBUG_I2C("Slave not ready for bit\n");
+			return -EREMOTEIO;
+		}
+	}
+	ivtv_setscl(itv, 0);
+	if (!ivtv_waitscl(itv, 0)) {
+		IVTV_DEBUG_I2C("Error setting SCL low\n");
+		return -EREMOTEIO;
+	}
+	return ivtv_ack(itv);
+}
+
+/* Read a byte from the i2c bus and send a NACK if applicable (i.e. for the
+   final byte) */
+static int ivtv_readbyte(struct ivtv *itv, unsigned char *byte, int nack)
+{
+	int i;
+
+	*byte = 0;
+
+	ivtv_setsda(itv, 1);
+	ivtv_scldelay(itv);
+	for (i = 0; i < 8; ++i) {
+		ivtv_setscl(itv, 0);
+		ivtv_scldelay(itv);
+		ivtv_setscl(itv, 1);
+		if (!ivtv_waitscl(itv, 1)) {
+			IVTV_DEBUG_I2C("Error setting SCL high\n");
+			return -EREMOTEIO;
+		}
+		*byte = ((*byte)<<1)|ivtv_getsda(itv);
+	}
+	ivtv_setscl(itv, 0);
+	ivtv_scldelay(itv);
+	ivtv_setsda(itv, nack);
+	ivtv_scldelay(itv);
+	ivtv_setscl(itv, 1);
+	ivtv_scldelay(itv);
+	ivtv_setscl(itv, 0);
+	ivtv_scldelay(itv);
+	IVTV_DEBUG_I2C("read %x\n",*byte);
+	return 0;
+}
+
+/* Issue a start condition on the i2c bus to alert slaves to prepare for
+   an address write */
+static int ivtv_start(struct ivtv *itv)
+{
+	int sda;
+
+	sda = ivtv_getsda(itv);
+	if (sda != 1) {
+		IVTV_DEBUG_I2C("SDA was low at start\n");
+		ivtv_setsda(itv, 1);
+		if (!ivtv_waitsda(itv, 1)) {
+			IVTV_DEBUG_I2C("SDA stuck low\n");
+			return -EREMOTEIO;
+		}
+	}
+	if (ivtv_getscl(itv) != 1) {
+		ivtv_setscl(itv, 1);
+		if (!ivtv_waitscl(itv, 1)) {
+			IVTV_DEBUG_I2C("SCL stuck low at start\n");
+			return -EREMOTEIO;
+		}
+	}
+	ivtv_setsda(itv, 0);
+	ivtv_scldelay(itv);
+	return 0;
+}
+
+/* Issue a stop condition on the i2c bus to release it */
+static int ivtv_stop(struct ivtv *itv)
+{
+	int i;
+
+	if (ivtv_getscl(itv) != 0) {
+		IVTV_DEBUG_I2C("SCL not low when stopping\n");
+		ivtv_setscl(itv, 0);
+		if (!ivtv_waitscl(itv, 0)) {
+			IVTV_DEBUG_I2C("SCL could not be set low\n");
+		}
+	}
+	ivtv_setsda(itv, 0);
+	ivtv_scldelay(itv);
+	ivtv_setscl(itv, 1);
+	if (!ivtv_waitscl(itv, 1)) {
+		IVTV_DEBUG_I2C("SCL could not be set high\n");
+		return -EREMOTEIO;
+	}
+	ivtv_scldelay(itv);
+	ivtv_setsda(itv, 1);
+	if (!ivtv_waitsda(itv, 1)) {
+		IVTV_DEBUG_I2C("resetting I2C\n");
+		for (i = 0; i < 16; ++i) {
+			ivtv_setscl(itv, 0);
+			ivtv_scldelay(itv);
+			ivtv_setscl(itv, 1);
+			ivtv_scldelay(itv);
+			ivtv_setsda(itv, 1);
+		}
+		ivtv_waitsda(itv, 1);
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+/* Write a message to the given i2c slave.  do_stop may be 0 to prevent
+   issuing the i2c stop condition (when following with a read) */
+static int ivtv_write(struct ivtv *itv, unsigned char addr, unsigned char *data, u32 len, int do_stop)
+{
+	int retry, ret = -EREMOTEIO;
+	u32 i;
+
+	for (retry = 0; ret != 0 && retry < 8; ++retry) {
+		ret = ivtv_start(itv);
+
+		if (ret == 0) {
+			ret = ivtv_sendbyte(itv, addr<<1);
+			for (i = 0; ret == 0 && i < len; ++i)
+				ret = ivtv_sendbyte(itv, data[i]);
+		}
+		if (ret != 0 || do_stop) {
+			ivtv_stop(itv);
+		}
+	}
+	if (ret)
+		IVTV_DEBUG_I2C("i2c write to %x failed\n", addr);
+	return ret;
+}
+
+/* Read data from the given i2c slave.  A stop condition is always issued. */
+static int ivtv_read(struct ivtv *itv, unsigned char addr, unsigned char *data, u32 len)
+{
+	int retry, ret = -EREMOTEIO;
+	u32 i;
+
+	for (retry = 0; ret != 0 && retry < 8; ++retry) {
+		ret = ivtv_start(itv);
+		if (ret == 0)
+			ret = ivtv_sendbyte(itv, (addr << 1) | 1);
+		for (i = 0; ret == 0 && i < len; ++i) {
+			ret = ivtv_readbyte(itv, &data[i], i == len - 1);
+		}
+		ivtv_stop(itv);
+	}
+	if (ret)
+		IVTV_DEBUG_I2C("i2c read from %x failed\n", addr);
+	return ret;
+}
+
+/* Kernel i2c transfer implementation.  Takes a number of messages to be read
+   or written.  If a read follows a write, this will occur without an
+   intervening stop condition */
+static int ivtv_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
+{
+	struct ivtv *itv = i2c_get_adapdata(i2c_adap);
+	int retval;
+	int i;
+
+	mutex_lock(&itv->i2c_bus_lock);
+	for (i = retval = 0; retval == 0 && i < num; i++) {
+		if (msgs[i].flags & I2C_M_RD)
+			retval = ivtv_read(itv, msgs[i].addr, msgs[i].buf, msgs[i].len);
+		else {
+			/* if followed by a read, don't stop */
+			int stop = !(i + 1 < num && msgs[i + 1].flags == I2C_M_RD);
+
+			retval = ivtv_write(itv, msgs[i].addr, msgs[i].buf, msgs[i].len, stop);
+		}
+	}
+	mutex_unlock(&itv->i2c_bus_lock);
+	return retval ? retval : num;
+}
+
+/* Kernel i2c capabilities */
+static u32 ivtv_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm ivtv_algo = {
+	.master_xfer   = ivtv_xfer,
+	.functionality = ivtv_functionality,
+};
+
+/* template for our-bit banger */
+static struct i2c_adapter ivtv_i2c_adap_hw_template = {
+	.name = "ivtv i2c driver",
+	.id = I2C_HW_B_CX2341X,
+	.algo = &ivtv_algo,
+	.algo_data = NULL,			/* filled from template */
+	.client_register = attach_inform,
+	.client_unregister = detach_inform,
+	.owner = THIS_MODULE,
+#ifdef I2C_ADAP_CLASS_TV_ANALOG
+	.class = I2C_ADAP_CLASS_TV_ANALOG,
+#endif
+};
+
+static void ivtv_setscl_old(void *data, int state)
+{
+	struct ivtv *itv = (struct ivtv *)data;
+
+	if (state)
+		itv->i2c_state |= 0x01;
+	else
+		itv->i2c_state &= ~0x01;
+
+	/* write them out */
+	/* write bits are inverted */
+	write_reg(~itv->i2c_state, IVTV_REG_I2C_SETSCL_OFFSET);
+}
+
+static void ivtv_setsda_old(void *data, int state)
+{
+	struct ivtv *itv = (struct ivtv *)data;
+
+	if (state)
+		itv->i2c_state |= 0x01;
+	else
+		itv->i2c_state &= ~0x01;
+
+	/* write them out */
+	/* write bits are inverted */
+	write_reg(~itv->i2c_state, IVTV_REG_I2C_SETSDA_OFFSET);
+}
+
+static int ivtv_getscl_old(void *data)
+{
+	struct ivtv *itv = (struct ivtv *)data;
+
+	return read_reg(IVTV_REG_I2C_GETSCL_OFFSET) & 1;
+}
+
+static int ivtv_getsda_old(void *data)
+{
+	struct ivtv *itv = (struct ivtv *)data;
+
+	return read_reg(IVTV_REG_I2C_GETSDA_OFFSET) & 1;
+}
+
+/* template for i2c-bit-algo */
+static struct i2c_adapter ivtv_i2c_adap_template = {
+	.name = "ivtv i2c driver",
+	.id = I2C_HW_B_CX2341X,  	/* algo-bit is OR'd with this */
+	.algo = NULL,                   /* set by i2c-algo-bit */
+	.algo_data = NULL,              /* filled from template */
+	.client_register = attach_inform,
+	.client_unregister = detach_inform,
+	.owner = THIS_MODULE,
+#ifdef I2C_ADAP_CLASS_TV_ANALOG
+	.class = I2C_ADAP_CLASS_TV_ANALOG,
+#endif
+};
+
+static struct i2c_algo_bit_data ivtv_i2c_algo_template = {
+	NULL,                   /* ?? */
+	ivtv_setsda_old,        /* setsda function */
+	ivtv_setscl_old,        /* " */
+	ivtv_getsda_old,        /* " */
+	ivtv_getscl_old,        /* " */
+	10,                     /* udelay */
+	200                     /* timeout */
+};
+
+static struct i2c_client ivtv_i2c_client_template = {
+	.name = "ivtv internal",
+};
+
+int ivtv_call_i2c_client(struct ivtv *itv, int addr, unsigned int cmd, void *arg)
+{
+	struct i2c_client *client;
+	int retval;
+	int i;
+
+	IVTV_DEBUG_I2C("call_i2c_client addr=%02x\n", addr);
+	for (i = 0; i < I2C_CLIENTS_MAX; i++) {
+		client = itv->i2c_clients[i];
+		if (client == NULL) {
+			continue;
+		}
+		if (client->driver->command == NULL) {
+			continue;
+		}
+		if (addr == client->addr) {
+			retval = client->driver->command(client, cmd, arg);
+			return retval;
+		}
+	}
+	if (cmd != VIDIOC_G_CHIP_IDENT)
+		IVTV_ERR("i2c addr 0x%02x not found for command 0x%x!\n", addr, cmd);
+	return -ENODEV;
+}
+
+/* Find the i2c device based on the driver ID and return
+   its i2c address or -ENODEV if no matching device was found. */
+static int ivtv_i2c_id_addr(struct ivtv *itv, u32 id)
+{
+	struct i2c_client *client;
+	int retval = -ENODEV;
+	int i;
+
+	for (i = 0; i < I2C_CLIENTS_MAX; i++) {
+		client = itv->i2c_clients[i];
+		if (client == NULL)
+			continue;
+		if (id == client->driver->id) {
+			retval = client->addr;
+			break;
+		}
+	}
+	return retval;
+}
+
+/* Find the i2c device name matching the DRIVERID */
+static const char *ivtv_i2c_id_name(u32 id)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(hw_driverids); i++)
+		if (hw_driverids[i] == id)
+			return hw_drivernames[i];
+	return "unknown device";
+}
+
+/* Find the i2c device name matching the IVTV_HW_ flag */
+static const char *ivtv_i2c_hw_name(u32 hw)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(hw_driverids); i++)
+		if (1 << i == hw)
+			return hw_drivernames[i];
+	return "unknown device";
+}
+
+/* Find the i2c device matching the IVTV_HW_ flag and return
+   its i2c address or -ENODEV if no matching device was found. */
+int ivtv_i2c_hw_addr(struct ivtv *itv, u32 hw)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(hw_driverids); i++)
+		if (1 << i == hw)
+			return ivtv_i2c_id_addr(itv, hw_driverids[i]);
+	return -ENODEV;
+}
+
+/* Calls i2c device based on IVTV_HW_ flag. If hw == 0, then do nothing.
+   If hw == IVTV_HW_GPIO then call the gpio handler. */
+int ivtv_i2c_hw(struct ivtv *itv, u32 hw, unsigned int cmd, void *arg)
+{
+	int addr;
+
+	if (hw == IVTV_HW_GPIO)
+		return ivtv_gpio(itv, cmd, arg);
+	if (hw == 0)
+		return 0;
+
+	addr = ivtv_i2c_hw_addr(itv, hw);
+	if (addr < 0) {
+		IVTV_ERR("i2c hardware 0x%08x (%s) not found for command 0x%x!\n",
+			       hw, ivtv_i2c_hw_name(hw), cmd);
+		return addr;
+	}
+	return ivtv_call_i2c_client(itv, addr, cmd, arg);
+}
+
+/* Calls i2c device based on I2C driver ID. */
+int ivtv_i2c_id(struct ivtv *itv, u32 id, unsigned int cmd, void *arg)
+{
+	int addr;
+
+	addr = ivtv_i2c_id_addr(itv, id);
+	if (addr < 0) {
+		if (cmd != VIDIOC_G_CHIP_IDENT)
+			IVTV_ERR("i2c ID 0x%08x (%s) not found for command 0x%x!\n",
+				id, ivtv_i2c_id_name(id), cmd);
+		return addr;
+	}
+	return ivtv_call_i2c_client(itv, addr, cmd, arg);
+}
+
+int ivtv_cx25840(struct ivtv *itv, unsigned int cmd, void *arg)
+{
+	return ivtv_call_i2c_client(itv, IVTV_CX25840_I2C_ADDR, cmd, arg);
+}
+
+int ivtv_saa7115(struct ivtv *itv, unsigned int cmd, void *arg)
+{
+	return ivtv_call_i2c_client(itv, IVTV_SAA7115_I2C_ADDR, cmd, arg);
+}
+
+int ivtv_saa7127(struct ivtv *itv, unsigned int cmd, void *arg)
+{
+	return ivtv_call_i2c_client(itv, IVTV_SAA7127_I2C_ADDR, cmd, arg);
+}
+
+int ivtv_saa717x(struct ivtv *itv, unsigned int cmd, void *arg)
+{
+	return ivtv_call_i2c_client(itv, IVTV_SAA717x_I2C_ADDR, cmd, arg);
+}
+
+int ivtv_upd64031a(struct ivtv *itv, unsigned int cmd, void *arg)
+{
+	return ivtv_call_i2c_client(itv, IVTV_UPD64031A_I2C_ADDR, cmd, arg);
+}
+
+int ivtv_upd64083(struct ivtv *itv, unsigned int cmd, void *arg)
+{
+	return ivtv_call_i2c_client(itv, IVTV_UPD64083_I2C_ADDR, cmd, arg);
+}
+
+/* broadcast cmd for all I2C clients and for the gpio subsystem */
+void ivtv_call_i2c_clients(struct ivtv *itv, unsigned int cmd, void *arg)
+{
+	if (itv->i2c_adap.algo == NULL) {
+		IVTV_ERR("adapter is not set");
+		return;
+	}
+	i2c_clients_command(&itv->i2c_adap, cmd, arg);
+	if (itv->hw_flags & IVTV_HW_GPIO)
+		ivtv_gpio(itv, cmd, arg);
+}
+
+/* init + register i2c algo-bit adapter */
+int __devinit init_ivtv_i2c(struct ivtv *itv)
+{
+	IVTV_DEBUG_I2C("i2c init\n");
+
+	if (itv->options.newi2c > 0) {
+		memcpy(&itv->i2c_adap, &ivtv_i2c_adap_hw_template,
+		       sizeof(struct i2c_adapter));
+	} else {
+		memcpy(&itv->i2c_adap, &ivtv_i2c_adap_template,
+		       sizeof(struct i2c_adapter));
+		memcpy(&itv->i2c_algo, &ivtv_i2c_algo_template,
+		       sizeof(struct i2c_algo_bit_data));
+		itv->i2c_algo.data = itv;
+		itv->i2c_adap.algo_data = &itv->i2c_algo;
+	}
+
+	sprintf(itv->i2c_adap.name + strlen(itv->i2c_adap.name), " #%d",
+		itv->num);
+	i2c_set_adapdata(&itv->i2c_adap, itv);
+
+	memcpy(&itv->i2c_client, &ivtv_i2c_client_template,
+	       sizeof(struct i2c_client));
+	itv->i2c_client.adapter = &itv->i2c_adap;
+	itv->i2c_adap.dev.parent = &itv->dev->dev;
+
+	IVTV_DEBUG_I2C("setting scl and sda to 1\n");
+	ivtv_setscl(itv, 1);
+	ivtv_setsda(itv, 1);
+
+	if (itv->options.newi2c > 0)
+		return i2c_add_adapter(&itv->i2c_adap);
+	else
+		return i2c_bit_add_bus(&itv->i2c_adap);
+}
+
+void __devexit exit_ivtv_i2c(struct ivtv *itv)
+{
+	IVTV_DEBUG_I2C("i2c exit\n");
+
+	i2c_del_adapter(&itv->i2c_adap);
+}