Merge tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into next

Pull regulator updates from Mark Brown:
 "The bulk of the changes for this release are a few new drivers however
  there are a couple of noticable core changes and the usual stream of
  cleanups and fixes:

   - move disable of unused regulators later in init so it comes after
     deferred probe has iterated making startup smoother.
   - fixes to reference counting of the DT nodes for constraints from
     Charles Keepax.  This has little practical impact since all real
     users of the regulator bindings use FDT which doesn't need the
     reference counting.
   - lots of cleanups, especially to the Samsung drivers.
   - support for Linear Technologies LTC3589, Texas Instruments
     TPS658640 and X-Powers AXP20x"

* tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (64 commits)
  regulator: pbias: remove unnecessary OOM messages
  regulator: max8649: remove unnecessary OOM messages
  regulator: core: Fix the init of DT defined fixed regulators
  regulator: core: Disable unused regulators after deferred probing is done
  regulator: Don't disable unused regulators we don't have permission for
  regulator: axp20x: Use regulator_map_voltage_ascend for LDO4
  regulator: use of_property_read_{bool|u32}()
  regulator: Fix regulator_get_{optional,exclusive}() documentation
  regulators: Add definition of regulator_set_voltage_time() for !CONFIG_REGULATOR
  regulator: arizona-ldo1: add missing #include
  regulator: pfuze100: Support enable/disable for fixed regulator
  regulator: ltc3589: Remove ltc3589_list_voltage_fixed function
  regulator: ltc3589: Fix module dependency
  regulator: tps6586x: Remove unused to_tps6586x_dev() function
  regulator: tps65218: Convert to use regulator_set_voltage_time_sel
  regulator: tps6586x: Add support for the TPS658640
  regulator: tps6586x: Prepare supporting fixed regulators
  regulator: pfuze100: Don't allocate an invalid gpio
  regulator: pfuze100: Support SWB enable/disable
  regulator: fixed: use of_property_read_{bool|u32}()
  ...

1 files changed, 46 insertions, 14 deletions

diff --git a/drivers/mfd/bcm590xx.c b/drivers/mfd/bcm590xx.c
index e9a33c79431b..43cba1a1973c 100644
--- a/drivers/mfd/bcm590xx.c
+++ b/drivers/mfd/bcm590xx.c
@@ -28,39 +28,71 @@ static const struct mfd_cell bcm590xx_devs[] = {
 	},
 };
 
-static const struct regmap_config bcm590xx_regmap_config = {
+static const struct regmap_config bcm590xx_regmap_config_pri = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
-	.max_register	= BCM590XX_MAX_REGISTER,
+	.max_register	= BCM590XX_MAX_REGISTER_PRI,
 	.cache_type	= REGCACHE_RBTREE,
 };
 
-static int bcm590xx_i2c_probe(struct i2c_client *i2c,
+static const struct regmap_config bcm590xx_regmap_config_sec = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= BCM590XX_MAX_REGISTER_SEC,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri,
 			      const struct i2c_device_id *id)
 {
 	struct bcm590xx *bcm590xx;
 	int ret;
 
-	bcm590xx = devm_kzalloc(&i2c->dev, sizeof(*bcm590xx), GFP_KERNEL);
+	bcm590xx = devm_kzalloc(&i2c_pri->dev, sizeof(*bcm590xx), GFP_KERNEL);
 	if (!bcm590xx)
 		return -ENOMEM;
 
-	i2c_set_clientdata(i2c, bcm590xx);
-	bcm590xx->dev = &i2c->dev;
-	bcm590xx->i2c_client = i2c;
+	i2c_set_clientdata(i2c_pri, bcm590xx);
+	bcm590xx->dev = &i2c_pri->dev;
+	bcm590xx->i2c_pri = i2c_pri;
 
-	bcm590xx->regmap = devm_regmap_init_i2c(i2c, &bcm590xx_regmap_config);
-	if (IS_ERR(bcm590xx->regmap)) {
-		ret = PTR_ERR(bcm590xx->regmap);
-		dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);
+	bcm590xx->regmap_pri = devm_regmap_init_i2c(i2c_pri,
+						 &bcm590xx_regmap_config_pri);
+	if (IS_ERR(bcm590xx->regmap_pri)) {
+		ret = PTR_ERR(bcm590xx->regmap_pri);
+		dev_err(&i2c_pri->dev, "primary regmap init failed: %d\n", ret);
 		return ret;
 	}
 
-	ret = mfd_add_devices(&i2c->dev, -1, bcm590xx_devs,
+	/* Secondary I2C slave address is the base address with A(2) asserted */
+	bcm590xx->i2c_sec = i2c_new_dummy(i2c_pri->adapter,
+					  i2c_pri->addr | BIT(2));
+	if (IS_ERR_OR_NULL(bcm590xx->i2c_sec)) {
+		dev_err(&i2c_pri->dev, "failed to add secondary I2C device\n");
+		return -ENODEV;
+	}
+	i2c_set_clientdata(bcm590xx->i2c_sec, bcm590xx);
+
+	bcm590xx->regmap_sec = devm_regmap_init_i2c(bcm590xx->i2c_sec,
+						&bcm590xx_regmap_config_sec);
+	if (IS_ERR(bcm590xx->regmap_sec)) {
+		ret = PTR_ERR(bcm590xx->regmap_sec);
+		dev_err(&bcm590xx->i2c_sec->dev,
+			"secondary regmap init failed: %d\n", ret);
+		goto err;
+	}
+
+	ret = mfd_add_devices(&i2c_pri->dev, -1, bcm590xx_devs,
 			      ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL);
-	if (ret < 0)
-		dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
+	if (ret < 0) {
+		dev_err(&i2c_pri->dev, "failed to add sub-devices: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
 
+err:
+	i2c_unregister_device(bcm590xx->i2c_sec);
 	return ret;
 }