mfd: twl6040: Rename the core driver

After the regmap_irq conversion there is no need to call the driver
as twl6040-core.c since there is only one c file remained.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 0 insertions, 749 deletions

diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
deleted file mode 100644
index e5f7b795afff..000000000000
--- a/drivers/mfd/twl6040-core.c
+++ /dev/null
@@ -1,749 +0,0 @@
-/*
- * MFD driver for TWL6040 audio device
- *
- * Authors:	Misael Lopez Cruz <misael.lopez@ti.com>
- *		Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
- *		Peter Ujfalusi <peter.ujfalusi@ti.com>
- *
- * Copyright:	(C) 2011 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
-#include <linux/of_platform.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/regmap.h>
-#include <linux/err.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/twl6040.h>
-#include <linux/regulator/consumer.h>
-
-#define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
-#define TWL6040_NUM_SUPPLIES	(2)
-
-static bool twl6040_has_vibra(struct twl6040_platform_data *pdata,
-			      struct device_node *node)
-{
-	if (pdata && pdata->vibra)
-		return true;
-
-#ifdef CONFIG_OF
-	if (of_find_node_by_name(node, "vibra"))
-		return true;
-#endif
-
-	return false;
-}
-
-int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
-{
-	int ret;
-	unsigned int val;
-
-	/* Vibra control registers from cache */
-	if (unlikely(reg == TWL6040_REG_VIBCTLL ||
-		     reg == TWL6040_REG_VIBCTLR)) {
-		val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)];
-	} else {
-		ret = regmap_read(twl6040->regmap, reg, &val);
-		if (ret < 0)
-			return ret;
-	}
-
-	return val;
-}
-EXPORT_SYMBOL(twl6040_reg_read);
-
-int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
-{
-	int ret;
-
-	ret = regmap_write(twl6040->regmap, reg, val);
-	/* Cache the vibra control registers */
-	if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR)
-		twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val;
-
-	return ret;
-}
-EXPORT_SYMBOL(twl6040_reg_write);
-
-int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
-{
-	return regmap_update_bits(twl6040->regmap, reg, mask, mask);
-}
-EXPORT_SYMBOL(twl6040_set_bits);
-
-int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
-{
-	return regmap_update_bits(twl6040->regmap, reg, mask, 0);
-}
-EXPORT_SYMBOL(twl6040_clear_bits);
-
-/* twl6040 codec manual power-up sequence */
-static int twl6040_power_up_manual(struct twl6040 *twl6040)
-{
-	u8 ldoctl, ncpctl, lppllctl;
-	int ret;
-
-	/* enable high-side LDO, reference system and internal oscillator */
-	ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA;
-	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
-	if (ret)
-		return ret;
-	usleep_range(10000, 10500);
-
-	/* enable negative charge pump */
-	ncpctl = TWL6040_NCPENA;
-	ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
-	if (ret)
-		goto ncp_err;
-	usleep_range(1000, 1500);
-
-	/* enable low-side LDO */
-	ldoctl |= TWL6040_LSLDOENA;
-	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
-	if (ret)
-		goto lsldo_err;
-	usleep_range(1000, 1500);
-
-	/* enable low-power PLL */
-	lppllctl = TWL6040_LPLLENA;
-	ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
-	if (ret)
-		goto lppll_err;
-	usleep_range(5000, 5500);
-
-	/* disable internal oscillator */
-	ldoctl &= ~TWL6040_OSCENA;
-	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
-	if (ret)
-		goto osc_err;
-
-	return 0;
-
-osc_err:
-	lppllctl &= ~TWL6040_LPLLENA;
-	twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
-lppll_err:
-	ldoctl &= ~TWL6040_LSLDOENA;
-	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
-lsldo_err:
-	ncpctl &= ~TWL6040_NCPENA;
-	twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
-ncp_err:
-	ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
-	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
-
-	dev_err(twl6040->dev, "manual power-up failed\n");
-	return ret;
-}
-
-/* twl6040 manual power-down sequence */
-static void twl6040_power_down_manual(struct twl6040 *twl6040)
-{
-	u8 ncpctl, ldoctl, lppllctl;
-
-	ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL);
-	ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL);
-	lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
-
-	/* enable internal oscillator */
-	ldoctl |= TWL6040_OSCENA;
-	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
-	usleep_range(1000, 1500);
-
-	/* disable low-power PLL */
-	lppllctl &= ~TWL6040_LPLLENA;
-	twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
-
-	/* disable low-side LDO */
-	ldoctl &= ~TWL6040_LSLDOENA;
-	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
-
-	/* disable negative charge pump */
-	ncpctl &= ~TWL6040_NCPENA;
-	twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
-
-	/* disable high-side LDO, reference system and internal oscillator */
-	ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
-	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
-}
-
-static irqreturn_t twl6040_readyint_handler(int irq, void *data)
-{
-	struct twl6040 *twl6040 = data;
-
-	complete(&twl6040->ready);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t twl6040_thint_handler(int irq, void *data)
-{
-	struct twl6040 *twl6040 = data;
-	u8 status;
-
-	status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
-	if (status & TWL6040_TSHUTDET) {
-		dev_warn(twl6040->dev, "Thermal shutdown, powering-off");
-		twl6040_power(twl6040, 0);
-	} else {
-		dev_warn(twl6040->dev, "Leaving thermal shutdown, powering-on");
-		twl6040_power(twl6040, 1);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static int twl6040_power_up_automatic(struct twl6040 *twl6040)
-{
-	int time_left;
-
-	gpio_set_value(twl6040->audpwron, 1);
-
-	time_left = wait_for_completion_timeout(&twl6040->ready,
-						msecs_to_jiffies(144));
-	if (!time_left) {
-		u8 intid;
-
-		dev_warn(twl6040->dev, "timeout waiting for READYINT\n");
-		intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
-		if (!(intid & TWL6040_READYINT)) {
-			dev_err(twl6040->dev, "automatic power-up failed\n");
-			gpio_set_value(twl6040->audpwron, 0);
-			return -ETIMEDOUT;
-		}
-	}
-
-	return 0;
-}
-
-int twl6040_power(struct twl6040 *twl6040, int on)
-{
-	int ret = 0;
-
-	mutex_lock(&twl6040->mutex);
-
-	if (on) {
-		/* already powered-up */
-		if (twl6040->power_count++)
-			goto out;
-
-		if (gpio_is_valid(twl6040->audpwron)) {
-			/* use automatic power-up sequence */
-			ret = twl6040_power_up_automatic(twl6040);
-			if (ret) {
-				twl6040->power_count = 0;
-				goto out;
-			}
-		} else {
-			/* use manual power-up sequence */
-			ret = twl6040_power_up_manual(twl6040);
-			if (ret) {
-				twl6040->power_count = 0;
-				goto out;
-			}
-		}
-		/* Default PLL configuration after power up */
-		twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
-		twl6040->sysclk = 19200000;
-		twl6040->mclk = 32768;
-	} else {
-		/* already powered-down */
-		if (!twl6040->power_count) {
-			dev_err(twl6040->dev,
-				"device is already powered-off\n");
-			ret = -EPERM;
-			goto out;
-		}
-
-		if (--twl6040->power_count)
-			goto out;
-
-		if (gpio_is_valid(twl6040->audpwron)) {
-			/* use AUDPWRON line */
-			gpio_set_value(twl6040->audpwron, 0);
-
-			/* power-down sequence latency */
-			usleep_range(500, 700);
-		} else {
-			/* use manual power-down sequence */
-			twl6040_power_down_manual(twl6040);
-		}
-		twl6040->sysclk = 0;
-		twl6040->mclk = 0;
-	}
-
-out:
-	mutex_unlock(&twl6040->mutex);
-	return ret;
-}
-EXPORT_SYMBOL(twl6040_power);
-
-int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
-		    unsigned int freq_in, unsigned int freq_out)
-{
-	u8 hppllctl, lppllctl;
-	int ret = 0;
-
-	mutex_lock(&twl6040->mutex);
-
-	hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL);
-	lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
-
-	/* Force full reconfiguration when switching between PLL */
-	if (pll_id != twl6040->pll) {
-		twl6040->sysclk = 0;
-		twl6040->mclk = 0;
-	}
-
-	switch (pll_id) {
-	case TWL6040_SYSCLK_SEL_LPPLL:
-		/* low-power PLL divider */
-		/* Change the sysclk configuration only if it has been canged */
-		if (twl6040->sysclk != freq_out) {
-			switch (freq_out) {
-			case 17640000:
-				lppllctl |= TWL6040_LPLLFIN;
-				break;
-			case 19200000:
-				lppllctl &= ~TWL6040_LPLLFIN;
-				break;
-			default:
-				dev_err(twl6040->dev,
-					"freq_out %d not supported\n",
-					freq_out);
-				ret = -EINVAL;
-				goto pll_out;
-			}
-			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
-					  lppllctl);
-		}
-
-		/* The PLL in use has not been change, we can exit */
-		if (twl6040->pll == pll_id)
-			break;
-
-		switch (freq_in) {
-		case 32768:
-			lppllctl |= TWL6040_LPLLENA;
-			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
-					  lppllctl);
-			mdelay(5);
-			lppllctl &= ~TWL6040_HPLLSEL;
-			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
-					  lppllctl);
-			hppllctl &= ~TWL6040_HPLLENA;
-			twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
-					  hppllctl);
-			break;
-		default:
-			dev_err(twl6040->dev,
-				"freq_in %d not supported\n", freq_in);
-			ret = -EINVAL;
-			goto pll_out;
-		}
-		break;
-	case TWL6040_SYSCLK_SEL_HPPLL:
-		/* high-performance PLL can provide only 19.2 MHz */
-		if (freq_out != 19200000) {
-			dev_err(twl6040->dev,
-				"freq_out %d not supported\n", freq_out);
-			ret = -EINVAL;
-			goto pll_out;
-		}
-
-		if (twl6040->mclk != freq_in) {
-			hppllctl &= ~TWL6040_MCLK_MSK;
-
-			switch (freq_in) {
-			case 12000000:
-				/* PLL enabled, active mode */
-				hppllctl |= TWL6040_MCLK_12000KHZ |
-					    TWL6040_HPLLENA;
-				break;
-			case 19200000:
-				/*
-				* PLL disabled
-				* (enable PLL if MCLK jitter quality
-				*  doesn't meet specification)
-				*/
-				hppllctl |= TWL6040_MCLK_19200KHZ;
-				break;
-			case 26000000:
-				/* PLL enabled, active mode */
-				hppllctl |= TWL6040_MCLK_26000KHZ |
-					    TWL6040_HPLLENA;
-				break;
-			case 38400000:
-				/* PLL enabled, active mode */
-				hppllctl |= TWL6040_MCLK_38400KHZ |
-					    TWL6040_HPLLENA;
-				break;
-			default:
-				dev_err(twl6040->dev,
-					"freq_in %d not supported\n", freq_in);
-				ret = -EINVAL;
-				goto pll_out;
-			}
-
-			/*
-			 * enable clock slicer to ensure input waveform is
-			 * square
-			 */
-			hppllctl |= TWL6040_HPLLSQRENA;
-
-			twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
-					  hppllctl);
-			usleep_range(500, 700);
-			lppllctl |= TWL6040_HPLLSEL;
-			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
-					  lppllctl);
-			lppllctl &= ~TWL6040_LPLLENA;
-			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
-					  lppllctl);
-		}
-		break;
-	default:
-		dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
-		ret = -EINVAL;
-		goto pll_out;
-	}
-
-	twl6040->sysclk = freq_out;
-	twl6040->mclk = freq_in;
-	twl6040->pll = pll_id;
-
-pll_out:
-	mutex_unlock(&twl6040->mutex);
-	return ret;
-}
-EXPORT_SYMBOL(twl6040_set_pll);
-
-int twl6040_get_pll(struct twl6040 *twl6040)
-{
-	if (twl6040->power_count)
-		return twl6040->pll;
-	else
-		return -ENODEV;
-}
-EXPORT_SYMBOL(twl6040_get_pll);
-
-unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
-{
-	return twl6040->sysclk;
-}
-EXPORT_SYMBOL(twl6040_get_sysclk);
-
-/* Get the combined status of the vibra control register */
-int twl6040_get_vibralr_status(struct twl6040 *twl6040)
-{
-	u8 status;
-
-	status = twl6040->vibra_ctrl_cache[0] | twl6040->vibra_ctrl_cache[1];
-	status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
-
-	return status;
-}
-EXPORT_SYMBOL(twl6040_get_vibralr_status);
-
-static struct resource twl6040_vibra_rsrc[] = {
-	{
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource twl6040_codec_rsrc[] = {
-	{
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
-{
-	/* Register 0 is not readable */
-	if (!reg)
-		return false;
-	return true;
-}
-
-static struct regmap_config twl6040_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = TWL6040_REG_STATUS, /* 0x2e */
-
-	.readable_reg = twl6040_readable_reg,
-};
-
-static const struct regmap_irq twl6040_irqs[] = {
-	{ .reg_offset = 0, .mask = TWL6040_THINT, },
-	{ .reg_offset = 0, .mask = TWL6040_PLUGINT | TWL6040_UNPLUGINT, },
-	{ .reg_offset = 0, .mask = TWL6040_HOOKINT, },
-	{ .reg_offset = 0, .mask = TWL6040_HFINT, },
-	{ .reg_offset = 0, .mask = TWL6040_VIBINT, },
-	{ .reg_offset = 0, .mask = TWL6040_READYINT, },
-};
-
-static struct regmap_irq_chip twl6040_irq_chip = {
-	.name = "twl6040",
-	.irqs = twl6040_irqs,
-	.num_irqs = ARRAY_SIZE(twl6040_irqs),
-
-	.num_regs = 1,
-	.status_base = TWL6040_REG_INTID,
-	.mask_base = TWL6040_REG_INTMR,
-};
-
-static int __devinit twl6040_probe(struct i2c_client *client,
-				     const struct i2c_device_id *id)
-{
-	struct twl6040_platform_data *pdata = client->dev.platform_data;
-	struct device_node *node = client->dev.of_node;
-	struct twl6040 *twl6040;
-	struct mfd_cell *cell = NULL;
-	int irq, ret, children = 0;
-
-	if (!pdata && !node) {
-		dev_err(&client->dev, "Platform data is missing\n");
-		return -EINVAL;
-	}
-
-	/* In order to operate correctly we need valid interrupt config */
-	if (!client->irq) {
-		dev_err(&client->dev, "Invalid IRQ configuration\n");
-		return -EINVAL;
-	}
-
-	twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040),
-			       GFP_KERNEL);
-	if (!twl6040) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	twl6040->regmap = devm_regmap_init_i2c(client, &twl6040_regmap_config);
-	if (IS_ERR(twl6040->regmap)) {
-		ret = PTR_ERR(twl6040->regmap);
-		goto err;
-	}
-
-	i2c_set_clientdata(client, twl6040);
-
-	twl6040->supplies[0].supply = "vio";
-	twl6040->supplies[1].supply = "v2v1";
-	ret = regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
-				 twl6040->supplies);
-	if (ret != 0) {
-		dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
-		goto regulator_get_err;
-	}
-
-	ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
-	if (ret != 0) {
-		dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
-		goto power_err;
-	}
-
-	twl6040->dev = &client->dev;
-	twl6040->irq = client->irq;
-
-	mutex_init(&twl6040->mutex);
-	init_completion(&twl6040->ready);
-
-	twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
-
-	/* ERRATA: Automatic power-up is not possible in ES1.0 */
-	if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) {
-		if (pdata)
-			twl6040->audpwron = pdata->audpwron_gpio;
-		else
-			twl6040->audpwron = of_get_named_gpio(node,
-						"ti,audpwron-gpio", 0);
-	} else
-		twl6040->audpwron = -EINVAL;
-
-	if (gpio_is_valid(twl6040->audpwron)) {
-		ret = gpio_request_one(twl6040->audpwron, GPIOF_OUT_INIT_LOW,
-				       "audpwron");
-		if (ret)
-			goto gpio_err;
-	}
-
-	ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq,
-			IRQF_ONESHOT, 0, &twl6040_irq_chip,
-			&twl6040->irq_data);
-	if (ret < 0)
-		goto irq_init_err;
-
-	twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data,
-					       TWL6040_IRQ_READY);
-	twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data,
-					       TWL6040_IRQ_TH);
-
-	ret = request_threaded_irq(twl6040->irq_ready, NULL,
-				   twl6040_readyint_handler, IRQF_ONESHOT,
-				   "twl6040_irq_ready", twl6040);
-	if (ret) {
-		dev_err(twl6040->dev, "READY IRQ request failed: %d\n", ret);
-		goto readyirq_err;
-	}
-
-	ret = request_threaded_irq(twl6040->irq_th, NULL,
-				   twl6040_thint_handler, IRQF_ONESHOT,
-				   "twl6040_irq_th", twl6040);
-	if (ret) {
-		dev_err(twl6040->dev, "Thermal IRQ request failed: %d\n", ret);
-		goto thirq_err;
-	}
-
-	/* dual-access registers controlled by I2C only */
-	twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL);
-
-	/*
-	 * The main functionality of twl6040 to provide audio on OMAP4+ systems.
-	 * We can add the ASoC codec child whenever this driver has been loaded.
-	 * The ASoC codec can work without pdata, pass the platform_data only if
-	 * it has been provided.
-	 */
-	irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_PLUG);
-	cell = &twl6040->cells[children];
-	cell->name = "twl6040-codec";
-	twl6040_codec_rsrc[0].start = irq;
-	twl6040_codec_rsrc[0].end = irq;
-	cell->resources = twl6040_codec_rsrc;
-	cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc);
-	if (pdata && pdata->codec) {
-		cell->platform_data = pdata->codec;
-		cell->pdata_size = sizeof(*pdata->codec);
-	}
-	children++;
-
-	if (twl6040_has_vibra(pdata, node)) {
-		irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_VIB);
-
-		cell = &twl6040->cells[children];
-		cell->name = "twl6040-vibra";
-		twl6040_vibra_rsrc[0].start = irq;
-		twl6040_vibra_rsrc[0].end = irq;
-		cell->resources = twl6040_vibra_rsrc;
-		cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc);
-
-		if (pdata && pdata->vibra) {
-			cell->platform_data = pdata->vibra;
-			cell->pdata_size = sizeof(*pdata->vibra);
-		}
-		children++;
-	}
-
-	/*
-	 * Enable the GPO driver in the following cases:
-	 * DT booted kernel or legacy boot with valid gpo platform_data
-	 */
-	if (!pdata || (pdata && pdata->gpo)) {
-		cell = &twl6040->cells[children];
-		cell->name = "twl6040-gpo";
-
-		if (pdata) {
-			cell->platform_data = pdata->gpo;
-			cell->pdata_size = sizeof(*pdata->gpo);
-		}
-		children++;
-	}
-
-	ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
-			      NULL, 0, NULL);
-	if (ret)
-		goto mfd_err;
-
-	return 0;
-
-mfd_err:
-	free_irq(twl6040->irq_th, twl6040);
-thirq_err:
-	free_irq(twl6040->irq_ready, twl6040);
-readyirq_err:
-	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
-irq_init_err:
-	if (gpio_is_valid(twl6040->audpwron))
-		gpio_free(twl6040->audpwron);
-gpio_err:
-	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
-power_err:
-	regulator_bulk_free(TWL6040_NUM_SUPPLIES, twl6040->supplies);
-regulator_get_err:
-	i2c_set_clientdata(client, NULL);
-err:
-	return ret;
-}
-
-static int __devexit twl6040_remove(struct i2c_client *client)
-{
-	struct twl6040 *twl6040 = i2c_get_clientdata(client);
-
-	if (twl6040->power_count)
-		twl6040_power(twl6040, 0);
-
-	if (gpio_is_valid(twl6040->audpwron))
-		gpio_free(twl6040->audpwron);
-
-	free_irq(twl6040->irq_ready, twl6040);
-	free_irq(twl6040->irq_th, twl6040);
-	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
-
-	mfd_remove_devices(&client->dev);
-	i2c_set_clientdata(client, NULL);
-
-	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
-	regulator_bulk_free(TWL6040_NUM_SUPPLIES, twl6040->supplies);
-
-	return 0;
-}
-
-static const struct i2c_device_id twl6040_i2c_id[] = {
-	{ "twl6040", 0, },
-	{ "twl6041", 0, },
-	{ },
-};
-MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id);
-
-static struct i2c_driver twl6040_driver = {
-	.driver = {
-		.name = "twl6040",
-		.owner = THIS_MODULE,
-	},
-	.probe		= twl6040_probe,
-	.remove		= __devexit_p(twl6040_remove),
-	.id_table	= twl6040_i2c_id,
-};
-
-module_i2c_driver(twl6040_driver);
-
-MODULE_DESCRIPTION("TWL6040 MFD");
-MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
-MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:twl6040");