aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc/core/core.h
diff options
context:
space:
mode:
authorAdrian Hunter <adrian.hunter@nokia.com>2010-08-11 14:17:46 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2010-08-12 08:43:30 -0700
commitdfe86cba7676d58db8de7e623f5e72f1b0d3ca35 (patch)
treeed7e6a267c50e0ba2374dc6895515d7a100961a3 /drivers/mmc/core/core.h
parentmm: fix writeback_in_progress() (diff)
downloadlinux-dev-dfe86cba7676d58db8de7e623f5e72f1b0d3ca35.tar.xz
linux-dev-dfe86cba7676d58db8de7e623f5e72f1b0d3ca35.zip
mmc: add erase, secure erase, trim and secure trim operations
SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/mmc/core/core.h')
-rw-r--r--drivers/mmc/core/core.h2
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index a811c52a1659..9d9eef50e5d1 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -29,6 +29,8 @@ struct mmc_bus_ops {
void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops);
void mmc_detach_bus(struct mmc_host *host);
+void mmc_init_erase(struct mmc_card *card);
+
void mmc_set_chip_select(struct mmc_host *host, int mode);
void mmc_set_clock(struct mmc_host *host, unsigned int hz);
void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode);