aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc/core/slot-gpio.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-06-05 16:11:43 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-06-05 16:11:43 -0700
commitf60342fac9fae20ada2cd5faadbc2a1337cae03f (patch)
treefe64b1cb3ea699d819e5e808264903aee2d8dc9a /drivers/mmc/core/slot-gpio.c
parentMerge tag 'leds_for_4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds (diff)
parentmmc: renesas_sdhi: really fix WP logic regressions (diff)
downloadlinux-dev-f60342fac9fae20ada2cd5faadbc2a1337cae03f.tar.xz
linux-dev-f60342fac9fae20ada2cd5faadbc2a1337cae03f.zip
Merge tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson: "MMC core: - Decrease polling rate for erase/trim/discard - Allow non-sleeping GPIOs for card detect - Improve mmc block removal path - Enable support for mmc_sw_reset() for SDIO cards - Add mmc_sw_reset() to allow users to do a soft reset of the card - Allow power delay to be tunable via DT - Allow card detect debounce delay to be tunable via DT - Enable new quirk to limit clock rate for Marvell 8887 chip - Don't show eMMC RPMB and BOOT areas in /proc/partitions - Add capability to avoid 3.3V signaling for fragile HWs MMC host: - Improve/fixup support for handle highmem pages - Remove depends on HAS_DMA in case of platform dependency - mvsdio: Enable support for erase/trim/discard - rtsx_usb: Enable support for erase/trim/discard - renesas_sdhi: Fix WP logic regressions - renesas_sdhi: Add r8a77965 support - renesas_sdhi: Add R8A77980 to whitelist - meson: Add optional support for device reset - meson: Add support for the Meson-AXG platform - dw_mmc: Add new driver for BlueField DW variant - mediatek: Add support for 64G DRAM DMA - sunxi: Deploy runtime PM support - jz4740: Add support for JZ4780 - jz4740: Enable support for DT based platforms - sdhci: Various improvement to timeout handling - sdhci: Disable support for HS200/HS400/UHS when no 1.8V support - sdhci-omap: Add support for controller in k2g SoC - sdhci-omap: Add workarounds for a couple of Erratas - sdhci-omap: Enable support for generic sdhci DT properties - sdhci-cadence: Re-send tune request to deal with errata - sdhci-pci: Fix 3.3V voltage switch for some BYT-based Intel controllers - sdhci-pci: Avoid 3.3V signaling on some NI 904x - sdhci-esdhc-imx: Use watermark levels for PIO access - sdhci-msm: Improve card detection handling - sdhci-msm: Add support voltage pad switching" * tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (104 commits) mmc: renesas_sdhi: really fix WP logic regressions mmc: mvsdio: Enable MMC_CAP_ERASE mmc: mvsdio: Respect card busy time out from mmc core mmc: sdhci-msm: Remove NO_CARD_NO_RESET quirk mmc: sunxi: Use ifdef rather than __maybe_unused mmc: mxmmc: Use ifdef rather than __maybe_unused mmc: mxmmc: include linux/highmem.h mmc: sunxi: mark PM functions as __maybe_unused mmc: Throttle calls to MMC_SEND_STATUS during mmc_do_erase() mmc: au1xmmc: handle highmem pages mmc: Allow non-sleeping GPIO cd mmc: sdhci-*: Don't emit error msg if sdhci_add_host() fails mmc: sd: Define name for default speed dtr mmc: core: Move calls to ->prepare_hs400_tuning() closer to mmc code mmc: sdhci-xenon: use match_string() helper mmc: wbsd: handle highmem pages mmc: ushc: handle highmem pages mmc: mxcmmc: handle highmem pages mmc: atmel-mci: use sg_copy_{from,to}_buffer mmc: android-goldfish: use sg_copy_{from,to}_buffer ...
Diffstat (limited to 'drivers/mmc/core/slot-gpio.c')
-rw-r--r--drivers/mmc/core/slot-gpio.c22
1 files changed, 16 insertions, 6 deletions
diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
index 31f7dbb15668..ef05e0039378 100644
--- a/drivers/mmc/core/slot-gpio.c
+++ b/drivers/mmc/core/slot-gpio.c
@@ -28,15 +28,17 @@ struct mmc_gpio {
irqreturn_t (*cd_gpio_isr)(int irq, void *dev_id);
char *ro_label;
char cd_label[0];
+ u32 cd_debounce_delay_ms;
};
static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
{
/* Schedule a card detection after a debounce timeout */
struct mmc_host *host = dev_id;
+ struct mmc_gpio *ctx = host->slot.handler_priv;
host->trigger_card_event = true;
- mmc_detect_change(host, msecs_to_jiffies(200));
+ mmc_detect_change(host, msecs_to_jiffies(ctx->cd_debounce_delay_ms));
return IRQ_HANDLED;
}
@@ -49,6 +51,7 @@ int mmc_gpio_alloc(struct mmc_host *host)
if (ctx) {
ctx->ro_label = ctx->cd_label + len;
+ ctx->cd_debounce_delay_ms = 200;
snprintf(ctx->cd_label, len, "%s cd", dev_name(host->parent));
snprintf(ctx->ro_label, len, "%s ro", dev_name(host->parent));
host->slot.handler_priv = ctx;
@@ -76,15 +79,22 @@ EXPORT_SYMBOL(mmc_gpio_get_ro);
int mmc_gpio_get_cd(struct mmc_host *host)
{
struct mmc_gpio *ctx = host->slot.handler_priv;
+ int cansleep;
if (!ctx || !ctx->cd_gpio)
return -ENOSYS;
- if (ctx->override_cd_active_level)
- return !gpiod_get_raw_value_cansleep(ctx->cd_gpio) ^
- !!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH);
+ cansleep = gpiod_cansleep(ctx->cd_gpio);
+ if (ctx->override_cd_active_level) {
+ int value = cansleep ?
+ gpiod_get_raw_value_cansleep(ctx->cd_gpio) :
+ gpiod_get_raw_value(ctx->cd_gpio);
+ return !value ^ !!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH);
+ }
- return gpiod_get_value_cansleep(ctx->cd_gpio);
+ return cansleep ?
+ gpiod_get_value_cansleep(ctx->cd_gpio) :
+ gpiod_get_value(ctx->cd_gpio);
}
EXPORT_SYMBOL(mmc_gpio_get_cd);
@@ -261,7 +271,7 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
if (debounce) {
ret = gpiod_set_debounce(desc, debounce);
if (ret < 0)
- return ret;
+ ctx->cd_debounce_delay_ms = debounce;
}
if (gpio_invert)