aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-11-03 13:28:14 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2011-11-03 13:28:14 -0700
commitd6748066ad0e8b2514545998f8367ebb3906f299 (patch)
treef7a9bfd764a8fb781aeda0ef2249afbab42dddf7 /drivers/mmc/host
parentedac: Only build sb_edac on 64-bit (diff)
parentMIPS: O32: Provide definition of registers ta0 .. ta3. (diff)
downloadlinux-dev-d6748066ad0e8b2514545998f8367ebb3906f299.tar.xz
linux-dev-d6748066ad0e8b2514545998f8367ebb3906f299.zip
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r--drivers/mmc/host/Kconfig2
-rw-r--r--drivers/mmc/host/au1xmmc.c92
2 files changed, 50 insertions, 44 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 87d5067ba629..cf444b0ca2cc 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -263,7 +263,7 @@ config MMC_WBSD
config MMC_AU1X
tristate "Alchemy AU1XX0 MMC Card Interface support"
- depends on SOC_AU1200
+ depends on MIPS_ALCHEMY
help
This selects the AMD Alchemy(R) Multimedia card interface.
If you have a Alchemy platform with a MMC slot, say Y or M here.
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 707bc7dddd22..5d3b9ae64523 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -64,11 +64,8 @@
#define AU1XMMC_DESCRIPTOR_COUNT 1
/* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */
-#ifdef CONFIG_SOC_AU1100
-#define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff
-#else /* Au1200 */
-#define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff
-#endif
+#define AU1100_MMC_DESCRIPTOR_SIZE 0x0000ffff
+#define AU1200_MMC_DESCRIPTOR_SIZE 0x003fffff
#define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
@@ -127,6 +124,7 @@ struct au1xmmc_host {
#define HOST_F_XMIT 0x0001
#define HOST_F_RECV 0x0002
#define HOST_F_DMA 0x0010
+#define HOST_F_DBDMA 0x0020
#define HOST_F_ACTIVE 0x0100
#define HOST_F_STOP 0x1000
@@ -151,6 +149,16 @@ struct au1xmmc_host {
#define DMA_CHANNEL(h) \
(((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan)
+static inline int has_dbdma(void)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1200:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask)
{
u32 val = au_readl(HOST_CONFIG(host));
@@ -353,14 +361,12 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
data->bytes_xfered = 0;
if (!data->error) {
- if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200 /* DBDMA */
+ if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) {
u32 chan = DMA_CHANNEL(host);
chan_tab_t *c = *((chan_tab_t **)chan);
au1x_dma_chan_t *cp = c->chan_ptr;
data->bytes_xfered = cp->ddma_bytecnt;
-#endif
} else
data->bytes_xfered =
(data->blocks * data->blksz) - host->pio.len;
@@ -570,11 +576,10 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
host->status = HOST_S_DATA;
- if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200 /* DBDMA */
+ if ((host->flags & (HOST_F_DMA | HOST_F_DBDMA))) {
u32 channel = DMA_CHANNEL(host);
- /* Start the DMA as soon as the buffer gets something in it */
+ /* Start the DBDMA as soon as the buffer gets something in it */
if (host->flags & HOST_F_RECV) {
u32 mask = SD_STATUS_DB | SD_STATUS_NE;
@@ -584,7 +589,6 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
}
au1xxx_dbdma_start(channel);
-#endif
}
}
@@ -633,8 +637,7 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host,
au_writel(data->blksz - 1, HOST_BLKSIZE(host));
- if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200 /* DBDMA */
+ if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) {
int i;
u32 channel = DMA_CHANNEL(host);
@@ -663,7 +666,6 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host,
datalen -= len;
}
-#endif
} else {
host->pio.index = 0;
host->pio.offset = 0;
@@ -838,7 +840,6 @@ static irqreturn_t au1xmmc_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-#ifdef CONFIG_SOC_AU1200
/* 8bit memory DMA device */
static dbdev_tab_t au1xmmc_mem_dbdev = {
.dev_id = DSCR_CMD0_ALWAYS,
@@ -905,7 +906,7 @@ static int au1xmmc_dbdma_init(struct au1xmmc_host *host)
au1xxx_dbdma_ring_alloc(host->rx_chan, AU1XMMC_DESCRIPTOR_COUNT);
/* DBDMA is good to go */
- host->flags |= HOST_F_DMA;
+ host->flags |= HOST_F_DMA | HOST_F_DBDMA;
return 0;
}
@@ -918,7 +919,6 @@ static void au1xmmc_dbdma_shutdown(struct au1xmmc_host *host)
au1xxx_dbdma_chan_free(host->rx_chan);
}
}
-#endif
static void au1xmmc_enable_sdio_irq(struct mmc_host *mmc, int en)
{
@@ -997,8 +997,16 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
mmc->f_min = 450000;
mmc->f_max = 24000000;
- mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
- mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1100:
+ mmc->max_seg_size = AU1100_MMC_DESCRIPTOR_SIZE;
+ mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+ break;
+ case ALCHEMY_CPU_AU1200:
+ mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE;
+ mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+ break;
+ }
mmc->max_blk_size = 2048;
mmc->max_blk_count = 512;
@@ -1028,11 +1036,11 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
tasklet_init(&host->finish_task, au1xmmc_tasklet_finish,
(unsigned long)host);
-#ifdef CONFIG_SOC_AU1200
- ret = au1xmmc_dbdma_init(host);
- if (ret)
- pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n");
-#endif
+ if (has_dbdma()) {
+ ret = au1xmmc_dbdma_init(host);
+ if (ret)
+ pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n");
+ }
#ifdef CONFIG_LEDS_CLASS
if (host->platdata && host->platdata->led) {
@@ -1073,9 +1081,8 @@ out5:
au_writel(0, HOST_CONFIG2(host));
au_sync();
-#ifdef CONFIG_SOC_AU1200
- au1xmmc_dbdma_shutdown(host);
-#endif
+ if (host->flags & HOST_F_DBDMA)
+ au1xmmc_dbdma_shutdown(host);
tasklet_kill(&host->data_task);
tasklet_kill(&host->finish_task);
@@ -1120,9 +1127,9 @@ static int __devexit au1xmmc_remove(struct platform_device *pdev)
tasklet_kill(&host->data_task);
tasklet_kill(&host->finish_task);
-#ifdef CONFIG_SOC_AU1200
- au1xmmc_dbdma_shutdown(host);
-#endif
+ if (host->flags & HOST_F_DBDMA)
+ au1xmmc_dbdma_shutdown(host);
+
au1xmmc_set_power(host, 0);
free_irq(host->irq, host);
@@ -1181,24 +1188,23 @@ static struct platform_driver au1xmmc_driver = {
static int __init au1xmmc_init(void)
{
-#ifdef CONFIG_SOC_AU1200
- /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
- * of 8 bits. And since devices are shared, we need to create
- * our own to avoid freaking out other devices.
- */
- memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
- if (!memid)
- pr_err("au1xmmc: cannot add memory dbdma dev\n");
-#endif
+ if (has_dbdma()) {
+ /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
+ * of 8 bits. And since devices are shared, we need to create
+ * our own to avoid freaking out other devices.
+ */
+ memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
+ if (!memid)
+ pr_err("au1xmmc: cannot add memory dbdma\n");
+ }
return platform_driver_register(&au1xmmc_driver);
}
static void __exit au1xmmc_exit(void)
{
-#ifdef CONFIG_SOC_AU1200
- if (memid)
+ if (has_dbdma() && memid)
au1xxx_ddma_del_device(memid);
-#endif
+
platform_driver_unregister(&au1xmmc_driver);
}