diff options
| author |   Mårten Lindahl <marten.lindahl@axis.com> | 2021-11-19 16:53:37 +0100 |
|---|---|---|
| committer |   Ulf Hansson <ulf.hansson@linaro.org> | 2021-12-14 21:35:25 +0100 |
| commit | 6a8c2018e872906dddf34da40ddcac54cd7b967f (patch) | |
| tree | 0b0b43a2302e0e5b6be8c9bedc04eabc45aad901 /drivers/mmc | |
| parent | mmc: core: adjust polling interval for CMD1 (diff) | |
| download | linux-dev-6a8c2018e872906dddf34da40ddcac54cd7b967f.tar.xz linux-dev-6a8c2018e872906dddf34da40ddcac54cd7b967f.zip | |
mmc: dw_mmc: Allow lower TMOUT value than maximum
The TMOUT register is always set with a full value for every transfer,
which (with a 200MHz clock) will give a full DRTO of ~84 milliseconds.
This is normally good enough to complete the request, but setting a full
value makes it impossible to test shorter timeouts, when for example
testing data read times on different SD cards.
Add a function to set any value smaller than the maximum of 0xFFFFFF.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/20211119155337.14341-1-marten.lindahl@axis.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/host/dw_mmc.c | 29 |
1 files changed, 28 insertions, 1 deletions
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 439080fbd87d..195f2b2434b0 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1284,6 +1284,33 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit) mci_writel(host, CTYPE, (slot->ctype << slot->id)); } +static void dw_mci_set_data_timeout(struct dw_mci *host, + unsigned int timeout_ns) +{ + u32 clk_div, tmout; + u64 tmp; + + clk_div = (mci_readl(host, CLKDIV) & 0xFF) * 2; + if (clk_div == 0) + clk_div = 1; + + tmp = DIV_ROUND_UP_ULL((u64)timeout_ns * host->bus_hz, NSEC_PER_SEC); + tmp = DIV_ROUND_UP_ULL(tmp, clk_div); + + /* TMOUT[7:0] (RESPONSE_TIMEOUT) */ + tmout = 0xFF; /* Set maximum */ + + /* TMOUT[31:8] (DATA_TIMEOUT) */ + if (!tmp || tmp > 0xFFFFFF) + tmout |= (0xFFFFFF << 8); + else + tmout |= (tmp & 0xFFFFFF) << 8; + + mci_writel(host, TMOUT, tmout); + dev_dbg(host->dev, "timeout_ns: %u => TMOUT[31:8]: 0x%#08x", + timeout_ns, tmout >> 8); +} + static void __dw_mci_start_request(struct dw_mci *host, struct dw_mci_slot *slot, struct mmc_command *cmd) @@ -1304,7 +1331,7 @@ static void __dw_mci_start_request(struct dw_mci *host, data = cmd->data; if (data) { - mci_writel(host, TMOUT, 0xFFFFFFFF); + dw_mci_set_data_timeout(host, data->timeout_ns); mci_writel(host, BYTCNT, data->blksz*data->blocks); mci_writel(host, BLKSIZ, data->blksz); } |