diff options
| author |   Peter Griffin <peter.griffin@linaro.org> | 2015-04-10 10:40:27 +0100 |
|---|---|---|
| committer |   Ulf Hansson <ulf.hansson@linaro.org> | 2015-04-10 12:55:40 +0200 |
| commit | cf48d32efb4b9e70ca1e17f2c38f77756e9aae58 (patch) | |
| tree | aa07dabb5c9a7c6626cd58dab244fa39c19da10e /drivers/mmc | |
| parent | mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue registers. (diff) | |
| download | linux-dev-cf48d32efb4b9e70ca1e17f2c38f77756e9aae58.tar.xz linux-dev-cf48d32efb4b9e70ca1e17f2c38f77756e9aae58.zip | |
mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function.
To allow UHS modes to work properly we need to provide the st specific
set_uhs_signaling callback function. This function differs from the
generic sdhci_set_uhs_signaling callback in that we need to configure
the correct delay depending on the UHS mode, and also set the V18_EN
bit.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/host/sdhci-st.c | 51 |
1 files changed, 51 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c index 10989edb5100..42a361c14f52 100644 --- a/drivers/mmc/host/sdhci-st.c +++ b/drivers/mmc/host/sdhci-st.c @@ -261,6 +261,56 @@ static int sdhci_st_set_dll_for_clock(struct sdhci_host *host) return ret; } +static void sdhci_st_set_uhs_signaling(struct sdhci_host *host, + unsigned int uhs) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct st_mmc_platform_data *pdata = pltfm_host->priv; + u16 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + int ret = 0; + + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + switch (uhs) { + /* + * Set V18_EN -- UHS modes do not work without this. + * does not change signaling voltage + */ + + case MMC_TIMING_UHS_SDR12: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_SDR12 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_SDR25: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_SDR25 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_SDR50: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180; + ret = sdhci_st_set_dll_for_clock(host); + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180; + ret = sdhci_st_set_dll_for_clock(host); + break; + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180; + break; + } + + if (ret) + dev_warn(mmc_dev(host->mmc), "Error setting dll for clock " + "(uhs %d)\n", uhs); + + dev_dbg(mmc_dev(host->mmc), "uhs %d, ctrl_2 %04X\n", uhs, ctrl_2); + + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); +} static u32 sdhci_st_readl(struct sdhci_host *host, int reg) { @@ -284,6 +334,7 @@ static const struct sdhci_ops sdhci_st_ops = { .set_bus_width = sdhci_set_bus_width, .read_l = sdhci_st_readl, .reset = sdhci_reset, + .set_uhs_signaling = sdhci_st_set_uhs_signaling, }; static const struct sdhci_pltfm_data sdhci_st_pdata = { |