diff options
| author |   Ulf Hansson <ulf.hansson@linaro.org> | 2019-01-29 15:35:56 +0100 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2019-02-25 08:40:58 +0100 |
| commit | e9968c6fa8e7852184135e84116c6c77ebb2987d (patch) | |
| tree | 7395705d6e606227311214b39f4afaf82026b4cc /drivers/mmc | |
| parent | mmc: sdhci-xenon: Fixup already marked switch fall-through (diff) | |
| download | linux-dev-e9968c6fa8e7852184135e84116c6c77ebb2987d.tar.xz linux-dev-e9968c6fa8e7852184135e84116c6c77ebb2987d.zip | |
mmc: mmci: Send a CMD12 to clear the DPSM at errors
The current approach with sending a CMD12 (STOP_TRANSMISSION) to complete a
data transfer request, either because of using the open-ended transmission
type or because of receiving an error during a pre-defined data transfer,
isn't sufficient for the STM32 sdmmc variant. More precisely, this variant
needs to clear the DPSM ("Data Path State Machine") by sending a CMD12, for
all failing ADTC commands.
Support this, by adding a struct mmc_command inside the struct mmci_host
and initialize it to a CMD12 during ->probe(). Let's also add checks for
the new conditions, to enable mmci_data_irq() and mmci_cmd_irq() to
postpone the calls to mmci_request_end(), but instead send the CMD12.
Cc: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Ludovic Barre <ludovic.barre@st.com>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/host/mmci.c | 25 | ||||
| -rw-r--r-- | drivers/mmc/host/mmci.h | 1 |
2 files changed, 24 insertions, 2 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 7dd3ccf5baf0..387ff14587b8 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1127,6 +1127,12 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c) writel(c, base + MMCICOMMAND); } +static void mmci_stop_command(struct mmci_host *host) +{ + host->stop_abort.error = 0; + mmci_start_command(host, &host->stop_abort, 0); +} + static void mmci_data_irq(struct mmci_host *host, struct mmc_data *data, unsigned int status) @@ -1196,10 +1202,16 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, /* The error clause is handled above, success! */ data->bytes_xfered = data->blksz * data->blocks; - if (!data->stop || (host->mrq->sbc && !data->error)) + if (!data->stop) { + if (host->variant->cmdreg_stop && data->error) + mmci_stop_command(host); + else + mmci_request_end(host, data->mrq); + } else if (host->mrq->sbc && !data->error) { mmci_request_end(host, data->mrq); - else + } else { mmci_start_command(host, data->stop, 0); + } } } @@ -1298,6 +1310,10 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, mmci_dma_error(host); mmci_stop_data(host); + if (host->variant->cmdreg_stop && cmd->error) { + mmci_stop_command(host); + return; + } } mmci_request_end(host, host->mrq); } else if (sbc) { @@ -1956,6 +1972,11 @@ static int mmci_probe(struct amba_device *dev, mmc->max_busy_timeout = 0; } + /* Prepare a CMD12 - needed to clear the DPSM on some variants. */ + host->stop_abort.opcode = MMC_STOP_TRANSMISSION; + host->stop_abort.arg = 0; + host->stop_abort.flags = MMC_RSP_R1B | MMC_CMD_AC; + mmc->ops = &mmci_ops; /* We support these PM capabilities. */ diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 24229097d05c..14df81054438 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -377,6 +377,7 @@ struct mmci_host { void __iomem *base; struct mmc_request *mrq; struct mmc_command *cmd; + struct mmc_command stop_abort; struct mmc_data *data; struct mmc_host *mmc; struct clk *clk; |