Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 248 insertions, 0 deletions

diff --git a/drivers/mtd/maps/octagon-5066.c b/drivers/mtd/maps/octagon-5066.c
new file mode 100644
index 000000000000..e5ff83de420e
--- /dev/null
+++ b/drivers/mtd/maps/octagon-5066.c
@@ -0,0 +1,248 @@
+// $Id: octagon-5066.c,v 1.26 2004/07/12 22:38:29 dwmw2 Exp $
+/* ######################################################################
+
+   Octagon 5066 MTD Driver. 
+  
+   The Octagon 5066 is a SBC based on AMD's 586-WB running at 133 MHZ. It
+   comes with a builtin AMD 29F016 flash chip and a socketed EEPROM that
+   is replacable by flash. Both units are mapped through a multiplexer
+   into a 32k memory window at 0xe8000. The control register for the 
+   multiplexing unit is located at IO 0x208 with a bit map of
+     0-5 Page Selection in 32k increments
+     6-7 Device selection:
+        00 SSD off
+        01 SSD 0 (Socket)
+        10 SSD 1 (Flash chip)
+        11 undefined
+  
+   On each SSD, the first 128k is reserved for use by the bios
+   (actually it IS the bios..) This only matters if you are booting off the 
+   flash, you must not put a file system starting there.
+   
+   The driver tries to do a detection algorithm to guess what sort of devices
+   are plugged into the sockets.
+   
+   ##################################################################### */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+
+#define WINDOW_START 0xe8000
+#define WINDOW_LENGTH 0x8000
+#define WINDOW_SHIFT 27
+#define WINDOW_MASK 0x7FFF
+#define PAGE_IO 0x208
+
+static volatile char page_n_dev = 0;
+static unsigned long iomapadr;
+static DEFINE_SPINLOCK(oct5066_spin);
+
+/*
+ * We use map_priv_1 to identify which device we are.
+ */
+
+static void __oct5066_page(struct map_info *map, __u8 byte)
+{
+	outb(byte,PAGE_IO);
+	page_n_dev = byte;
+}
+
+static inline void oct5066_page(struct map_info *map, unsigned long ofs)
+{
+	__u8 byte = map->map_priv_1 | (ofs >> WINDOW_SHIFT);
+	
+	if (page_n_dev != byte)
+		__oct5066_page(map, byte);
+}
+
+
+static map_word oct5066_read8(struct map_info *map, unsigned long ofs)
+{
+	map_word ret;
+	spin_lock(&oct5066_spin);
+	oct5066_page(map, ofs);
+	ret.x[0] = readb(iomapadr + (ofs & WINDOW_MASK));
+	spin_unlock(&oct5066_spin);
+	return ret;
+}
+
+static void oct5066_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	while(len) {
+		unsigned long thislen = len;
+		if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
+			thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
+		
+		spin_lock(&oct5066_spin);
+		oct5066_page(map, from);
+		memcpy_fromio(to, iomapadr + from, thislen);
+		spin_unlock(&oct5066_spin);
+		to += thislen;
+		from += thislen;
+		len -= thislen;
+	}
+}
+
+static void oct5066_write8(struct map_info *map, map_word d, unsigned long adr)
+{
+	spin_lock(&oct5066_spin);
+	oct5066_page(map, adr);
+	writeb(d.x[0], iomapadr + (adr & WINDOW_MASK));
+	spin_unlock(&oct5066_spin);
+}
+
+static void oct5066_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	while(len) {
+		unsigned long thislen = len;
+		if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
+			thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
+		
+		spin_lock(&oct5066_spin);
+		oct5066_page(map, to);
+		memcpy_toio(iomapadr + to, from, thislen);
+		spin_unlock(&oct5066_spin);
+		to += thislen;
+		from += thislen;
+		len -= thislen;
+	}
+}
+
+static struct map_info oct5066_map[2] = {
+	{
+		.name = "Octagon 5066 Socket",
+		.phys = NO_XIP,
+		.size = 512 * 1024,
+		.bankwidth = 1,
+		.read = oct5066_read8,
+		.copy_from = oct5066_copy_from,
+		.write = oct5066_write8,
+		.copy_to = oct5066_copy_to,
+		.map_priv_1 = 1<<6
+	},
+	{
+		.name = "Octagon 5066 Internal Flash",
+		.phys = NO_XIP,
+		.size = 2 * 1024 * 1024,
+		.bankwidth = 1,
+		.read = oct5066_read8,
+		.copy_from = oct5066_copy_from,
+		.write = oct5066_write8,
+		.copy_to = oct5066_copy_to,
+		.map_priv_1 = 2<<6
+	}
+};
+
+static struct mtd_info *oct5066_mtd[2] = {NULL, NULL};
+
+// OctProbe - Sense if this is an octagon card
+// ---------------------------------------------------------------------
+/* Perform a simple validity test, we map the window select SSD0 and
+   change pages while monitoring the window. A change in the window, 
+   controlled by the PAGE_IO port is a functioning 5066 board. This will
+   fail if the thing in the socket is set to a uniform value. */
+static int __init OctProbe(void)
+{
+   unsigned int Base = (1 << 6);
+   unsigned long I;
+   unsigned long Values[10];
+   for (I = 0; I != 20; I++)
+   {
+      outb(Base + (I%10),PAGE_IO);
+      if (I < 10)
+      {
+	 // Record the value and check for uniqueness
+	 Values[I%10] = readl(iomapadr);
+	 if (I > 0 && Values[I%10] == Values[0])
+	    return -EAGAIN;
+      }      
+      else
+      {
+	 // Make sure we get the same values on the second pass
+	 if (Values[I%10] != readl(iomapadr))
+	    return -EAGAIN;
+      }      
+   }
+   return 0;
+}
+
+void cleanup_oct5066(void)
+{
+	int i;
+	for (i=0; i<2; i++) {
+		if (oct5066_mtd[i]) {
+			del_mtd_device(oct5066_mtd[i]);
+			map_destroy(oct5066_mtd[i]);
+		}
+	}
+	iounmap((void *)iomapadr);
+	release_region(PAGE_IO, 1);
+}
+
+int __init init_oct5066(void)
+{
+	int i;
+	int ret = 0;
+
+	// Do an autoprobe sequence
+	if (!request_region(PAGE_IO,1,"Octagon SSD")) {
+		printk(KERN_NOTICE "5066: Page Register in Use\n");
+		return -EAGAIN;
+	}
+	iomapadr = (unsigned long)ioremap(WINDOW_START, WINDOW_LENGTH);
+	if (!iomapadr) {
+		printk(KERN_NOTICE "Failed to ioremap memory region\n");
+		ret = -EIO;
+		goto out_rel;
+	}
+	if (OctProbe() != 0) {
+		printk(KERN_NOTICE "5066: Octagon Probe Failed, is this an Octagon 5066 SBC?\n");
+		iounmap((void *)iomapadr);
+		ret = -EAGAIN;
+		goto out_unmap;
+	}
+      	
+	// Print out our little header..
+	printk("Octagon 5066 SSD IO:0x%x MEM:0x%x-0x%x\n",PAGE_IO,WINDOW_START,
+	       WINDOW_START+WINDOW_LENGTH);
+	
+	for (i=0; i<2; i++) {
+		oct5066_mtd[i] = do_map_probe("cfi_probe", &oct5066_map[i]);
+		if (!oct5066_mtd[i])
+			oct5066_mtd[i] = do_map_probe("jedec", &oct5066_map[i]);
+		if (!oct5066_mtd[i])
+			oct5066_mtd[i] = do_map_probe("map_ram", &oct5066_map[i]);
+		if (!oct5066_mtd[i])
+			oct5066_mtd[i] = do_map_probe("map_rom", &oct5066_map[i]);
+		if (oct5066_mtd[i]) {
+			oct5066_mtd[i]->owner = THIS_MODULE;
+			add_mtd_device(oct5066_mtd[i]);
+		}
+	}
+	
+	if (!oct5066_mtd[0] && !oct5066_mtd[1]) {
+		cleanup_oct5066();
+		return -ENXIO;
+	}	  
+
+	return 0;
+
+ out_unmap:
+	iounmap((void *)iomapadr);
+ out_rel:
+	release_region(PAGE_IO, 1);
+	return ret;
+}
+
+module_init(init_oct5066);
+module_exit(cleanup_oct5066);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jason Gunthorpe <jgg@deltatee.com>, David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("MTD map driver for Octagon 5066 Single Board Computer");