seeq: Move the SEEQ drivers

Move the drivers that use SEEQ chipset into drivers/net/ethernet/seeq
and make the necessary Kconfig and Makefile changes.

CC: Russell King <linux@arm.linux.org.uk>
CC: Hamish Coleman <hamish@zot.apana.org.au>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 918 deletions

diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c
deleted file mode 100644
index 44a8746f4014..000000000000
--- a/drivers/net/arm/ether3.c
+++ /dev/null
@@ -1,918 +0,0 @@
-/*
- *  linux/drivers/acorn/net/ether3.c
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * SEEQ nq8005 ethernet driver for Acorn/ANT Ether3 card
- *  for Acorn machines
- *
- * By Russell King, with some suggestions from borris@ant.co.uk
- *
- * Changelog:
- * 1.04	RMK	29/02/1996	Won't pass packets that are from our ethernet
- *				address up to the higher levels - they're
- *				silently ignored.  I/F can now be put into
- *				multicast mode.  Receiver routine optimised.
- * 1.05	RMK	30/02/1996	Now claims interrupt at open when part of
- *				the kernel rather than when a module.
- * 1.06	RMK	02/03/1996	Various code cleanups
- * 1.07	RMK	13/10/1996	Optimised interrupt routine and transmit
- *				routines.
- * 1.08	RMK	14/10/1996	Fixed problem with too many packets,
- *				prevented the kernel message about dropped
- *				packets appearing too many times a second.
- *				Now does not disable all IRQs, only the IRQ
- *				used by this card.
- * 1.09	RMK	10/11/1996	Only enables TX irq when buffer space is low,
- *				but we still service the TX queue if we get a
- *				RX interrupt.
- * 1.10	RMK	15/07/1997	Fixed autoprobing of NQ8004.
- * 1.11	RMK	16/11/1997	Fixed autoprobing of NQ8005A.
- * 1.12	RMK	31/12/1997	Removed reference to dev_tint for Linux 2.1.
- *      RMK	27/06/1998	Changed asm/delay.h to linux/delay.h.
- * 1.13	RMK	29/06/1998	Fixed problem with transmission of packets.
- *				Chip seems to have a bug in, whereby if the
- *				packet starts two bytes from the end of the
- *				buffer, it corrupts the receiver chain, and
- *				never updates the transmit status correctly.
- * 1.14	RMK	07/01/1998	Added initial code for ETHERB addressing.
- * 1.15	RMK	30/04/1999	More fixes to the transmit routine for buggy
- *				hardware.
- * 1.16	RMK	10/02/2000	Updated for 2.3.43
- * 1.17	RMK	13/05/2000	Updated for 2.3.99-pre8
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/ecard.h>
-#include <asm/io.h>
-
-static char version[] __devinitdata = "ether3 ethernet driver (c) 1995-2000 R.M.King v1.17\n";
-
-#include "ether3.h"
-
-static unsigned int net_debug = NET_DEBUG;
-
-static void	ether3_setmulticastlist(struct net_device *dev);
-static int	ether3_rx(struct net_device *dev, unsigned int maxcnt);
-static void	ether3_tx(struct net_device *dev);
-static int	ether3_open (struct net_device *dev);
-static int	ether3_sendpacket (struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t ether3_interrupt (int irq, void *dev_id);
-static int	ether3_close (struct net_device *dev);
-static void	ether3_setmulticastlist (struct net_device *dev);
-static void	ether3_timeout(struct net_device *dev);
-
-#define BUS_16		2
-#define BUS_8		1
-#define BUS_UNKNOWN	0
-
-/* --------------------------------------------------------------------------- */
-
-typedef enum {
-	buffer_write,
-	buffer_read
-} buffer_rw_t;
-
-/*
- * ether3 read/write.  Slow things down a bit...
- * The SEEQ8005 doesn't like us writing to its registers
- * too quickly.
- */
-static inline void ether3_outb(int v, const void __iomem *r)
-{
-	writeb(v, r);
-	udelay(1);
-}
-
-static inline void ether3_outw(int v, const void __iomem *r)
-{
-	writew(v, r);
-	udelay(1);
-}
-#define ether3_inb(r)		({ unsigned int __v = readb((r)); udelay(1); __v; })
-#define ether3_inw(r)		({ unsigned int __v = readw((r)); udelay(1); __v; })
-
-static int
-ether3_setbuffer(struct net_device *dev, buffer_rw_t read, int start)
-{
-	int timeout = 1000;
-
-	ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1);
-	ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND);
-
-	while ((ether3_inw(REG_STATUS) & STAT_FIFOEMPTY) == 0) {
-		if (!timeout--) {
-			printk("%s: setbuffer broken\n", dev->name);
-			priv(dev)->broken = 1;
-			return 1;
-		}
-		udelay(1);
-	}
-
-	if (read == buffer_read) {
-		ether3_outw(start, REG_DMAADDR);
-		ether3_outw(priv(dev)->regs.command | CMD_FIFOREAD, REG_COMMAND);
-	} else {
-		ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND);
-		ether3_outw(start, REG_DMAADDR);
-	}
-	return 0;
-}
-
-/*
- * write data to the buffer memory
- */
-#define ether3_writebuffer(dev,data,length)			\
-	writesw(REG_BUFWIN, (data), (length) >> 1)
-
-#define ether3_writeword(dev,data)				\
-	writew((data), REG_BUFWIN)
-
-#define ether3_writelong(dev,data)	{			\
-	void __iomem *reg_bufwin = REG_BUFWIN;			\
-	writew((data), reg_bufwin);				\
-	writew((data) >> 16, reg_bufwin);			\
-}
-
-/*
- * read data from the buffer memory
- */
-#define ether3_readbuffer(dev,data,length)			\
-	readsw(REG_BUFWIN, (data), (length) >> 1)
-
-#define ether3_readword(dev)					\
-	readw(REG_BUFWIN)
-
-#define ether3_readlong(dev)	 				\
-	readw(REG_BUFWIN) | (readw(REG_BUFWIN) << 16)
-
-/*
- * Switch LED off...
- */
-static void ether3_ledoff(unsigned long data)
-{
-	struct net_device *dev = (struct net_device *)data;
-	ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2);
-}
-
-/*
- * switch LED on...
- */
-static inline void ether3_ledon(struct net_device *dev)
-{
-	del_timer(&priv(dev)->timer);
-	priv(dev)->timer.expires = jiffies + HZ / 50; /* leave on for 1/50th second */
-	priv(dev)->timer.data = (unsigned long)dev;
-	priv(dev)->timer.function = ether3_ledoff;
-	add_timer(&priv(dev)->timer);
-	if (priv(dev)->regs.config2 & CFG2_CTRLO)
-		ether3_outw(priv(dev)->regs.config2 &= ~CFG2_CTRLO, REG_CONFIG2);
-}
-
-/*
- * Read the ethernet address string from the on board rom.
- * This is an ascii string!!!
- */
-static int __devinit
-ether3_addr(char *addr, struct expansion_card *ec)
-{
-	struct in_chunk_dir cd;
-	char *s;
-	
-	if (ecard_readchunk(&cd, ec, 0xf5, 0) && (s = strchr(cd.d.string, '('))) {
-		int i;
-		for (i = 0; i<6; i++) {
-			addr[i] = simple_strtoul(s + 1, &s, 0x10);
-			if (*s != (i==5?')' : ':' ))
-				break;
-		}
-		if (i == 6)
-			return 0;
-	}
-	/* I wonder if we should even let the user continue in this case
-	 *   - no, it would be better to disable the device
-	 */
-	printk(KERN_ERR "ether3: Couldn't read a valid MAC address from card.\n");
-	return -ENODEV;
-}
-
-/* --------------------------------------------------------------------------- */
-
-static int __devinit
-ether3_ramtest(struct net_device *dev, unsigned char byte)
-{
-	unsigned char *buffer = kmalloc(RX_END, GFP_KERNEL);
-	int i,ret = 0;
-	int max_errors = 4;
-	int bad = -1;
-
-	if (!buffer)
-		return 1;
-
-	memset(buffer, byte, RX_END);
-	ether3_setbuffer(dev, buffer_write, 0);
-	ether3_writebuffer(dev, buffer, TX_END);
-	ether3_setbuffer(dev, buffer_write, RX_START);
-	ether3_writebuffer(dev, buffer + RX_START, RX_LEN);
-	memset(buffer, byte ^ 0xff, RX_END);
-	ether3_setbuffer(dev, buffer_read, 0);
-	ether3_readbuffer(dev, buffer, TX_END);
-	ether3_setbuffer(dev, buffer_read, RX_START);
-	ether3_readbuffer(dev, buffer + RX_START, RX_LEN);
-
-	for (i = 0; i < RX_END; i++) {
-		if (buffer[i] != byte) {
-			if (max_errors > 0 && bad != buffer[i]) {
-				printk("%s: RAM failed with (%02X instead of %02X) at 0x%04X",
-				       dev->name, buffer[i], byte, i);
-				ret = 2;
-				max_errors--;
-				bad = i;
-			}
-		} else {
-			if (bad != -1) {
-				if (bad != i - 1)
-					printk(" - 0x%04X\n", i - 1);
-				printk("\n");
-				bad = -1;
-			}
-		}
-	}
-	if (bad != -1)
-		printk(" - 0xffff\n");
-	kfree(buffer);
-
-	return ret;
-}
-
-/* ------------------------------------------------------------------------------- */
-
-static int __devinit ether3_init_2(struct net_device *dev)
-{
-	int i;
-
-	priv(dev)->regs.config1 = CFG1_RECVCOMPSTAT0|CFG1_DMABURST8;
-	priv(dev)->regs.config2 = CFG2_CTRLO|CFG2_RECVCRC|CFG2_ERRENCRC;
-	priv(dev)->regs.command = 0;
-
-	/*
-	 * Set up our hardware address
-	 */
-	ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1);
-	for (i = 0; i < 6; i++)
-		ether3_outb(dev->dev_addr[i], REG_BUFWIN);
-
-	if (dev->flags & IFF_PROMISC)
-		priv(dev)->regs.config1 |= CFG1_RECVPROMISC;
-	else if (dev->flags & IFF_MULTICAST)
-		priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI;
-	else
-		priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD;
-
-	/*
-	 * There is a problem with the NQ8005 in that it occasionally loses the
-	 * last two bytes.  To get round this problem, we receive the CRC as
-	 * well.  That way, if we do lose the last two, then it doesn't matter.
-	 */
-	ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1);
-	ether3_outw((TX_END>>8) - 1, REG_BUFWIN);
-	ether3_outw(priv(dev)->rx_head, REG_RECVPTR);
-	ether3_outw(0, REG_TRANSMITPTR);
-	ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND);
-	ether3_outw(priv(dev)->regs.config2, REG_CONFIG2);
-	ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1);
-	ether3_outw(priv(dev)->regs.command, REG_COMMAND);
-
-	i = ether3_ramtest(dev, 0x5A);
-	if(i)
-		return i;
-	i = ether3_ramtest(dev, 0x1E);
-	if(i)
-		return i;
-
-	ether3_setbuffer(dev, buffer_write, 0);
-	ether3_writelong(dev, 0);
-	return 0;
-}
-
-static void
-ether3_init_for_open(struct net_device *dev)
-{
-	int i;
-
-	/* Reset the chip */
-	ether3_outw(CFG2_RESET, REG_CONFIG2);
-	udelay(4);
-
-	priv(dev)->regs.command = 0;
-	ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND);
-	while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON))
-		barrier();
-
-	ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1);
-	for (i = 0; i < 6; i++)
-		ether3_outb(dev->dev_addr[i], REG_BUFWIN);
-
-	priv(dev)->tx_head	= 0;
-	priv(dev)->tx_tail	= 0;
-	priv(dev)->regs.config2 |= CFG2_CTRLO;
-	priv(dev)->rx_head	= RX_START;
-
-	ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1);
-	ether3_outw((TX_END>>8) - 1, REG_BUFWIN);
-	ether3_outw(priv(dev)->rx_head, REG_RECVPTR);
-	ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND);
-	ether3_outw(0, REG_TRANSMITPTR);
-	ether3_outw(priv(dev)->regs.config2, REG_CONFIG2);
-	ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1);
-
-	ether3_setbuffer(dev, buffer_write, 0);
-	ether3_writelong(dev, 0);
-
-	priv(dev)->regs.command = CMD_ENINTRX | CMD_ENINTTX;
-	ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND);
-}
-
-static inline int
-ether3_probe_bus_8(struct net_device *dev, int val)
-{
-	int write_low, write_high, read_low, read_high;
-
-	write_low = val & 255;
-	write_high = val >> 8;
-
-	printk(KERN_DEBUG "ether3_probe: write8 [%02X:%02X]", write_high, write_low);
-
-	ether3_outb(write_low, REG_RECVPTR);
-	ether3_outb(write_high, REG_RECVPTR + 4);
-
-	read_low = ether3_inb(REG_RECVPTR);
-	read_high = ether3_inb(REG_RECVPTR + 4);
-
-	printk(", read8 [%02X:%02X]\n", read_high, read_low);
-
-	return read_low == write_low && read_high == write_high;
-}
-
-static inline int
-ether3_probe_bus_16(struct net_device *dev, int val)
-{
-	int read_val;
-
-	ether3_outw(val, REG_RECVPTR);
-	read_val = ether3_inw(REG_RECVPTR);
-
-	printk(KERN_DEBUG "ether3_probe: write16 [%04X], read16 [%04X]\n", val, read_val);
-
-	return read_val == val;
-}
-
-/*
- * Open/initialize the board.  This is called (in the current kernel)
- * sometime after booting when the 'ifconfig' program is run.
- *
- * This routine should set everything up anew at each open, even
- * registers that "should" only need to be set once at boot, so that
- * there is non-reboot way to recover if something goes wrong.
- */
-static int
-ether3_open(struct net_device *dev)
-{
-	if (!is_valid_ether_addr(dev->dev_addr)) {
-		printk(KERN_WARNING "%s: invalid ethernet MAC address\n",
-			dev->name);
-		return -EINVAL;
-	}
-
-	if (request_irq(dev->irq, ether3_interrupt, 0, "ether3", dev))
-		return -EAGAIN;
-
-	ether3_init_for_open(dev);
-
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-/*
- * The inverse routine to ether3_open().
- */
-static int
-ether3_close(struct net_device *dev)
-{
-	netif_stop_queue(dev);
-
-	disable_irq(dev->irq);
-
-	ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND);
-	priv(dev)->regs.command = 0;
-	while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON))
-		barrier();
-	ether3_outb(0x80, REG_CONFIG2 + 4);
-	ether3_outw(0, REG_COMMAND);
-
-	free_irq(dev->irq, dev);
-
-	return 0;
-}
-
-/*
- * Set or clear promiscuous/multicast mode filter for this adaptor.
- *
- * We don't attempt any packet filtering.  The card may have a SEEQ 8004
- * in which does not have the other ethernet address registers present...
- */
-static void ether3_setmulticastlist(struct net_device *dev)
-{
-	priv(dev)->regs.config1 &= ~CFG1_RECVPROMISC;
-
-	if (dev->flags & IFF_PROMISC) {
-		/* promiscuous mode */
-		priv(dev)->regs.config1 |= CFG1_RECVPROMISC;
-	} else if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev)) {
-		priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI;
-	} else
-		priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD;
-
-	ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1);
-}
-
-static void ether3_timeout(struct net_device *dev)
-{
-	unsigned long flags;
-
-	del_timer(&priv(dev)->timer);
-
-	local_irq_save(flags);
-	printk(KERN_ERR "%s: transmit timed out, network cable problem?\n", dev->name);
-	printk(KERN_ERR "%s: state: { status=%04X cfg1=%04X cfg2=%04X }\n", dev->name,
-		ether3_inw(REG_STATUS), ether3_inw(REG_CONFIG1), ether3_inw(REG_CONFIG2));
-	printk(KERN_ERR "%s: { rpr=%04X rea=%04X tpr=%04X }\n", dev->name,
-		ether3_inw(REG_RECVPTR), ether3_inw(REG_RECVEND), ether3_inw(REG_TRANSMITPTR));
-	printk(KERN_ERR "%s: tx head=%X tx tail=%X\n", dev->name,
-		priv(dev)->tx_head, priv(dev)->tx_tail);
-	ether3_setbuffer(dev, buffer_read, priv(dev)->tx_tail);
-	printk(KERN_ERR "%s: packet status = %08X\n", dev->name, ether3_readlong(dev));
-	local_irq_restore(flags);
-
-	priv(dev)->regs.config2 |= CFG2_CTRLO;
-	dev->stats.tx_errors += 1;
-	ether3_outw(priv(dev)->regs.config2, REG_CONFIG2);
-	priv(dev)->tx_head = priv(dev)->tx_tail = 0;
-
-	netif_wake_queue(dev);
-}
-
-/*
- * Transmit a packet
- */
-static int
-ether3_sendpacket(struct sk_buff *skb, struct net_device *dev)
-{
-	unsigned long flags;
-	unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
-	unsigned int ptr, next_ptr;
-
-	if (priv(dev)->broken) {
-		dev_kfree_skb(skb);
-		dev->stats.tx_dropped++;
-		netif_start_queue(dev);
-		return NETDEV_TX_OK;
-	}
-
-	length = (length + 1) & ~1;
-	if (length != skb->len) {
-		if (skb_padto(skb, length))
-			goto out;
-	}
-
-	next_ptr = (priv(dev)->tx_head + 1) & 15;
-
-	local_irq_save(flags);
-
-	if (priv(dev)->tx_tail == next_ptr) {
-		local_irq_restore(flags);
-		return NETDEV_TX_BUSY;	/* unable to queue */
-	}
-
-	ptr		 = 0x600 * priv(dev)->tx_head;
-	priv(dev)->tx_head = next_ptr;
-	next_ptr	*= 0x600;
-
-#define TXHDR_FLAGS (TXHDR_TRANSMIT|TXHDR_CHAINCONTINUE|TXHDR_DATAFOLLOWS|TXHDR_ENSUCCESS)
-
-	ether3_setbuffer(dev, buffer_write, next_ptr);
-	ether3_writelong(dev, 0);
-	ether3_setbuffer(dev, buffer_write, ptr);
-	ether3_writelong(dev, 0);
-	ether3_writebuffer(dev, skb->data, length);
-	ether3_writeword(dev, htons(next_ptr));
-	ether3_writeword(dev, TXHDR_CHAINCONTINUE >> 16);
-	ether3_setbuffer(dev, buffer_write, ptr);
-	ether3_writeword(dev, htons((ptr + length + 4)));
-	ether3_writeword(dev, TXHDR_FLAGS >> 16);
-	ether3_ledon(dev);
-
-	if (!(ether3_inw(REG_STATUS) & STAT_TXON)) {
-		ether3_outw(ptr, REG_TRANSMITPTR);
-		ether3_outw(priv(dev)->regs.command | CMD_TXON, REG_COMMAND);
-	}
-
-	next_ptr = (priv(dev)->tx_head + 1) & 15;
-	local_irq_restore(flags);
-
-	dev_kfree_skb(skb);
-
-	if (priv(dev)->tx_tail == next_ptr)
-		netif_stop_queue(dev);
-
- out:
-	return NETDEV_TX_OK;
-}
-
-static irqreturn_t
-ether3_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = (struct net_device *)dev_id;
-	unsigned int status, handled = IRQ_NONE;
-
-#if NET_DEBUG > 1
-	if(net_debug & DEBUG_INT)
-		printk("eth3irq: %d ", irq);
-#endif
-
-	status = ether3_inw(REG_STATUS);
-
-	if (status & STAT_INTRX) {
-		ether3_outw(CMD_ACKINTRX | priv(dev)->regs.command, REG_COMMAND);
-		ether3_rx(dev, 12);
-		handled = IRQ_HANDLED;
-	}
-
-	if (status & STAT_INTTX) {
-		ether3_outw(CMD_ACKINTTX | priv(dev)->regs.command, REG_COMMAND);
-		ether3_tx(dev);
-		handled = IRQ_HANDLED;
-	}
-
-#if NET_DEBUG > 1
-	if(net_debug & DEBUG_INT)
-		printk("done\n");
-#endif
-	return handled;
-}
-
-/*
- * If we have a good packet(s), get it/them out of the buffers.
- */
-static int ether3_rx(struct net_device *dev, unsigned int maxcnt)
-{
-	unsigned int next_ptr = priv(dev)->rx_head, received = 0;
-
-	ether3_ledon(dev);
-
-	do {
-		unsigned int this_ptr, status;
-		unsigned char addrs[16];
-
-		/*
-		 * read the first 16 bytes from the buffer.
-		 * This contains the status bytes etc and ethernet addresses,
-		 * and we also check the source ethernet address to see if
-		 * it originated from us.
-		 */
-		{
-			unsigned int temp_ptr;
-			ether3_setbuffer(dev, buffer_read, next_ptr);
-			temp_ptr = ether3_readword(dev);
-			status = ether3_readword(dev);
-			if ((status & (RXSTAT_DONE | RXHDR_CHAINCONTINUE | RXHDR_RECEIVE)) !=
-				(RXSTAT_DONE | RXHDR_CHAINCONTINUE) || !temp_ptr)
-				break;
-
-			this_ptr = next_ptr + 4;
-			next_ptr = ntohs(temp_ptr);
-		}
-		ether3_setbuffer(dev, buffer_read, this_ptr);
-		ether3_readbuffer(dev, addrs+2, 12);
-
-if (next_ptr < RX_START || next_ptr >= RX_END) {
- int i;
- printk("%s: bad next pointer @%04X: ", dev->name, priv(dev)->rx_head);
- printk("%02X %02X %02X %02X ", next_ptr >> 8, next_ptr & 255, status & 255, status >> 8);
- for (i = 2; i < 14; i++)
-   printk("%02X ", addrs[i]);
- printk("\n");
- next_ptr = priv(dev)->rx_head;
- break;
-}
-		/*
- 		 * ignore our own packets...
-	 	 */
-		if (!(*(unsigned long *)&dev->dev_addr[0] ^ *(unsigned long *)&addrs[2+6]) &&
-		    !(*(unsigned short *)&dev->dev_addr[4] ^ *(unsigned short *)&addrs[2+10])) {
-			maxcnt ++; /* compensate for loopedback packet */
-			ether3_outw(next_ptr >> 8, REG_RECVEND);
-		} else
-		if (!(status & (RXSTAT_OVERSIZE|RXSTAT_CRCERROR|RXSTAT_DRIBBLEERROR|RXSTAT_SHORTPACKET))) {
-			unsigned int length = next_ptr - this_ptr;
-			struct sk_buff *skb;
-
-			if (next_ptr <= this_ptr)
-				length += RX_END - RX_START;
-
-			skb = dev_alloc_skb(length + 2);
-			if (skb) {
-				unsigned char *buf;
-
-				skb_reserve(skb, 2);
-				buf = skb_put(skb, length);
-				ether3_readbuffer(dev, buf + 12, length - 12);
-				ether3_outw(next_ptr >> 8, REG_RECVEND);
-				*(unsigned short *)(buf + 0)	= *(unsigned short *)(addrs + 2);
-				*(unsigned long *)(buf + 2)	= *(unsigned long *)(addrs + 4);
-				*(unsigned long *)(buf + 6)	= *(unsigned long *)(addrs + 8);
-				*(unsigned short *)(buf + 10)	= *(unsigned short *)(addrs + 12);
-				skb->protocol = eth_type_trans(skb, dev);
-				netif_rx(skb);
-				received ++;
-			} else
-				goto dropping;
-		} else {
-			struct net_device_stats *stats = &dev->stats;
-			ether3_outw(next_ptr >> 8, REG_RECVEND);
-			if (status & RXSTAT_OVERSIZE)	  stats->rx_over_errors ++;
-			if (status & RXSTAT_CRCERROR)	  stats->rx_crc_errors ++;
-			if (status & RXSTAT_DRIBBLEERROR) stats->rx_fifo_errors ++;
-			if (status & RXSTAT_SHORTPACKET)  stats->rx_length_errors ++;
-			stats->rx_errors++;
-		}
-	}
-	while (-- maxcnt);
-
-done:
-	dev->stats.rx_packets += received;
-	priv(dev)->rx_head = next_ptr;
-	/*
-	 * If rx went off line, then that means that the buffer may be full.  We
-	 * have dropped at least one packet.
-	 */
-	if (!(ether3_inw(REG_STATUS) & STAT_RXON)) {
-		dev->stats.rx_dropped++;
-    		ether3_outw(next_ptr, REG_RECVPTR);
-		ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND);
-	}
-
-	return maxcnt;
-
-dropping:{
-	static unsigned long last_warned;
-
-	ether3_outw(next_ptr >> 8, REG_RECVEND);
-	/*
-	 * Don't print this message too many times...
-	 */
-	if (time_after(jiffies, last_warned + 10 * HZ)) {
-		last_warned = jiffies;
-		printk("%s: memory squeeze, dropping packet.\n", dev->name);
-	}
-	dev->stats.rx_dropped++;
-	goto done;
-	}
-}
-
-/*
- * Update stats for the transmitted packet(s)
- */
-static void ether3_tx(struct net_device *dev)
-{
-	unsigned int tx_tail = priv(dev)->tx_tail;
-	int max_work = 14;
-
-	do {
-	    	unsigned long status;
-
-    		/*
-	    	 * Read the packet header
-    		 */
-	    	ether3_setbuffer(dev, buffer_read, tx_tail * 0x600);
-    		status = ether3_readlong(dev);
-
-		/*
-		 * Check to see if this packet has been transmitted
-		 */
-		if ((status & (TXSTAT_DONE | TXHDR_TRANSMIT)) !=
-		    (TXSTAT_DONE | TXHDR_TRANSMIT))
-			break;
-
-		/*
-		 * Update errors
-		 */
-		if (!(status & (TXSTAT_BABBLED | TXSTAT_16COLLISIONS)))
-			dev->stats.tx_packets++;
-		else {
-			dev->stats.tx_errors++;
-			if (status & TXSTAT_16COLLISIONS)
-				dev->stats.collisions += 16;
-			if (status & TXSTAT_BABBLED)
-				dev->stats.tx_fifo_errors++;
-		}
-
-		tx_tail = (tx_tail + 1) & 15;
-	} while (--max_work);
-
-	if (priv(dev)->tx_tail != tx_tail) {
-		priv(dev)->tx_tail = tx_tail;
-		netif_wake_queue(dev);
-	}
-}
-
-static void __devinit ether3_banner(void)
-{
-	static unsigned version_printed = 0;
-
-	if (net_debug && version_printed++ == 0)
-		printk(KERN_INFO "%s", version);
-}
-
-static const struct net_device_ops ether3_netdev_ops = {
-	.ndo_open		= ether3_open,
-	.ndo_stop		= ether3_close,
-	.ndo_start_xmit		= ether3_sendpacket,
-	.ndo_set_multicast_list	= ether3_setmulticastlist,
-	.ndo_tx_timeout		= ether3_timeout,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address	= eth_mac_addr,
-};
-
-static int __devinit
-ether3_probe(struct expansion_card *ec, const struct ecard_id *id)
-{
-	const struct ether3_data *data = id->data;
-	struct net_device *dev;
-	int bus_type, ret;
-
-	ether3_banner();
-
-	ret = ecard_request_resources(ec);
-	if (ret)
-		goto out;
-
-	dev = alloc_etherdev(sizeof(struct dev_priv));
-	if (!dev) {
-		ret = -ENOMEM;
-		goto release;
-	}
-
-	SET_NETDEV_DEV(dev, &ec->dev);
-
-	priv(dev)->base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
-	if (!priv(dev)->base) {
-		ret = -ENOMEM;
-		goto free;
-	}
-
-	ec->irqaddr = priv(dev)->base + data->base_offset;
-	ec->irqmask = 0xf0;
-
-	priv(dev)->seeq = priv(dev)->base + data->base_offset;
-	dev->irq = ec->irq;
-
-	ether3_addr(dev->dev_addr, ec);
-
-	init_timer(&priv(dev)->timer);
-
-	/* Reset card...
-	 */
-	ether3_outb(0x80, REG_CONFIG2 + 4);
-	bus_type = BUS_UNKNOWN;
-	udelay(4);
-
-	/* Test using Receive Pointer (16-bit register) to find out
-	 * how the ether3 is connected to the bus...
-	 */
-	if (ether3_probe_bus_8(dev, 0x100) &&
-	    ether3_probe_bus_8(dev, 0x201))
-		bus_type = BUS_8;
-
-	if (bus_type == BUS_UNKNOWN &&
-	    ether3_probe_bus_16(dev, 0x101) &&
-	    ether3_probe_bus_16(dev, 0x201))
-		bus_type = BUS_16;
-
-	switch (bus_type) {
-	case BUS_UNKNOWN:
-		printk(KERN_ERR "%s: unable to identify bus width\n", dev->name);
-		ret = -ENODEV;
-		goto free;
-
-	case BUS_8:
-		printk(KERN_ERR "%s: %s found, but is an unsupported "
-			"8-bit card\n", dev->name, data->name);
-		ret = -ENODEV;
-		goto free;
-
-	default:
-		break;
-	}
-
-	if (ether3_init_2(dev)) {
-		ret = -ENODEV;
-		goto free;
-	}
-
-	dev->netdev_ops		= &ether3_netdev_ops;
-	dev->watchdog_timeo	= 5 * HZ / 100;
-
-	ret = register_netdev(dev);
-	if (ret)
-		goto free;
-
-	printk("%s: %s in slot %d, %pM\n",
-	       dev->name, data->name, ec->slot_no, dev->dev_addr);
-
-	ecard_set_drvdata(ec, dev);
-	return 0;
-
- free:
-	free_netdev(dev);
- release:
-	ecard_release_resources(ec);
- out:
-	return ret;
-}
-
-static void __devexit ether3_remove(struct expansion_card *ec)
-{
-	struct net_device *dev = ecard_get_drvdata(ec);
-
-	ecard_set_drvdata(ec, NULL);
-
-	unregister_netdev(dev);
-	free_netdev(dev);
-	ecard_release_resources(ec);
-}
-
-static struct ether3_data ether3 = {
-	.name		= "ether3",
-	.base_offset	= 0,
-};
-
-static struct ether3_data etherb = {
-	.name		= "etherb",
-	.base_offset	= 0x800,
-};
-
-static const struct ecard_id ether3_ids[] = {
-	{ MANU_ANT2, PROD_ANT_ETHER3, &ether3 },
-	{ MANU_ANT,  PROD_ANT_ETHER3, &ether3 },
-	{ MANU_ANT,  PROD_ANT_ETHERB, &etherb },
-	{ 0xffff, 0xffff }
-};
-
-static struct ecard_driver ether3_driver = {
-	.probe		= ether3_probe,
-	.remove		= __devexit_p(ether3_remove),
-	.id_table	= ether3_ids,
-	.drv = {
-		.name	= "ether3",
-	},
-};
-
-static int __init ether3_init(void)
-{
-	return ecard_register_driver(&ether3_driver);
-}
-
-static void __exit ether3_exit(void)
-{
-	ecard_remove_driver(&ether3_driver);
-}
-
-module_init(ether3_init);
-module_exit(ether3_exit);
-
-MODULE_LICENSE("GPL");