diff options
| author |   Bryan Wu <bryan.wu@analog.com> | 2007-09-19 23:37:36 +0800 |
|---|---|---|
| committer |   David S. Miller <davem@sunset.davemloft.net> | 2007-10-10 16:51:50 -0700 |
| commit | 4ae5a3ad5aa35972863f9c656ebd35446fbb5192 (patch) | |
| tree | 0572d69ffbc64858e86b1a5128380c2138916fa7 /drivers/net/bfin_mac.h | |
| parent | Blackfin EMAC driver: add power management interface and change the bf537mac_reset to bf537mac_disable (diff) | |
| download | linux-dev-4ae5a3ad5aa35972863f9c656ebd35446fbb5192.tar.xz linux-dev-4ae5a3ad5aa35972863f9c656ebd35446fbb5192.zip | |
Blackfin EMAC driver: Add phy abstraction layer supporting in bfin_emac driver
- add MDIO functions and register mdio bus
- add phy abstraction layer (PAL) functions and use PAL API
- test on STAMP537 board
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/bfin_mac.h')
| -rw-r--r-- | drivers/net/bfin_mac.h | 53 |
1 files changed, 9 insertions, 44 deletions
diff --git a/drivers/net/bfin_mac.h b/drivers/net/bfin_mac.h index b82724692283..3a107ad75381 100644 --- a/drivers/net/bfin_mac.h +++ b/drivers/net/bfin_mac.h @@ -31,32 +31,6 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -/* - * PHY REGISTER NAMES - */ -#define PHYREG_MODECTL 0x0000 -#define PHYREG_MODESTAT 0x0001 -#define PHYREG_PHYID1 0x0002 -#define PHYREG_PHYID2 0x0003 -#define PHYREG_ANAR 0x0004 -#define PHYREG_ANLPAR 0x0005 -#define PHYREG_ANER 0x0006 -#define PHYREG_NSR 0x0010 -#define PHYREG_LBREMR 0x0011 -#define PHYREG_REC 0x0012 -#define PHYREG_10CFG 0x0013 -#define PHYREG_PHY1_1 0x0014 -#define PHYREG_PHY1_2 0x0015 -#define PHYREG_PHY2 0x0016 -#define PHYREG_TW_1 0x0017 -#define PHYREG_TW_2 0x0018 -#define PHYREG_TEST 0x0019 - -#define PHY_RESET 0x8000 -#define PHY_ANEG_EN 0x1000 -#define PHY_DUPLEX 0x0100 -#define PHY_SPD_SET 0x2000 - #define BFIN_MAC_CSUM_OFFLOAD struct dma_descriptor { @@ -104,27 +78,18 @@ struct bf537mac_local { * can find out semi-useless statistics of how well the card is * performing */ - int version; + struct net_device_stats stats; - int FlowEnabled; /* record if data flow is active */ - int EtherIntIVG; /* IVG for the ethernet interrupt */ - int RXIVG; /* IVG for the RX completion */ - int TXIVG; /* IVG for the TX completion */ - int PhyAddr; /* PHY address */ - int OpMode; /* set these bits n the OPMODE regs */ - int Port10; /* set port speed to 10 Mbit/s */ - int GenChksums; /* IP checksums to be calculated */ - int NoRcveLnth; /* dont insert recv length at start of buffer */ - int StripPads; /* remove trailing pad bytes */ - int FullDuplex; /* set full duplex mode */ - int Negotiate; /* enable auto negotiation */ - int Loopback; /* loopback at the PHY */ - int Cache; /* Buffers may be cached */ - int FlowControl; /* flow control active */ - int CLKIN; /* clock in value in MHZ */ - unsigned short IntMask; /* interrupt mask */ unsigned char Mac[6]; /* MAC address of the board */ spinlock_t lock; + + /* MII and PHY stuffs */ + int old_link; /* used by bf537_adjust_link */ + int old_speed; + int old_duplex; + + struct phy_device *phydev; + struct mii_bus mii_bus; }; extern void get_bf537_ether_addr(char *addr); |