diff options
| author |   Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-04-07 06:03:04 -0700 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-08-10 19:54:39 -0700 |
| commit | adfc5217e9db68d3f0cec8dd847c1a6d3ab549ee (patch) | |
| tree | 4082ae79d2d4d40b39c9b5144b8171464b5f7eb2 /drivers/net/bnx2x/bnx2x_link.c | |
| parent | 8390: Move the 8390 related drivers (diff) | |
| download | linux-dev-adfc5217e9db68d3f0cec8dd847c1a6d3ab549ee.tar.xz linux-dev-adfc5217e9db68d3f0cec8dd847c1a6d3ab549ee.zip | |
broadcom: Move the Broadcom drivers
Moves the drivers for Broadcom devices into
drivers/net/ethernet/broadcom/ and the necessary Kconfig and Makefile
changes.
CC: Eilon Greenstein <eilong@broadcom.com>
CC: Michael Chan <mchan@broadcom.com>
CC: Matt Carlson <mcarlson@broadcom.com>
CC: Gary Zambrano <zambrano@broadcom.com>
CC: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.c')
| -rw-r--r-- | drivers/net/bnx2x/bnx2x_link.c | 12472 |
1 files changed, 0 insertions, 12472 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c deleted file mode 100644 index d45b1555a602..000000000000 --- a/drivers/net/bnx2x/bnx2x_link.c +++ /dev/null @@ -1,12472 +0,0 @@ -/* Copyright 2008-2011 Broadcom Corporation - * - * Unless you and Broadcom execute a separate written software license - * agreement governing use of this software, this software is licensed to you - * under the terms of the GNU General Public License version 2, available - * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). - * - * Notwithstanding the above, under no circumstances may you combine this - * software in any way with any other Broadcom software provided under a - * license other than the GPL, without Broadcom's express prior written - * consent. - * - * Written by Yaniv Rosner - * - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/netdevice.h> -#include <linux/delay.h> -#include <linux/ethtool.h> -#include <linux/mutex.h> - -#include "bnx2x.h" -#include "bnx2x_cmn.h" - - -/********************************************************/ -#define ETH_HLEN 14 -/* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */ -#define ETH_OVREHEAD (ETH_HLEN + 8 + 8) -#define ETH_MIN_PACKET_SIZE 60 -#define ETH_MAX_PACKET_SIZE 1500 -#define ETH_MAX_JUMBO_PACKET_SIZE 9600 -#define MDIO_ACCESS_TIMEOUT 1000 -#define BMAC_CONTROL_RX_ENABLE 2 -#define WC_LANE_MAX 4 -#define I2C_SWITCH_WIDTH 2 -#define I2C_BSC0 0 -#define I2C_BSC1 1 -#define I2C_WA_RETRY_CNT 3 -#define MCPR_IMC_COMMAND_READ_OP 1 -#define MCPR_IMC_COMMAND_WRITE_OP 2 - -/***********************************************************/ -/* Shortcut definitions */ -/***********************************************************/ - -#define NIG_LATCH_BC_ENABLE_MI_INT 0 - -#define NIG_STATUS_EMAC0_MI_INT \ - NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT -#define NIG_STATUS_XGXS0_LINK10G \ - NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G -#define NIG_STATUS_XGXS0_LINK_STATUS \ - NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS -#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \ - NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE -#define NIG_STATUS_SERDES0_LINK_STATUS \ - NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS -#define NIG_MASK_MI_INT \ - NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT -#define NIG_MASK_XGXS0_LINK10G \ - NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G -#define NIG_MASK_XGXS0_LINK_STATUS \ - NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS -#define NIG_MASK_SERDES0_LINK_STATUS \ - NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS - -#define MDIO_AN_CL73_OR_37_COMPLETE \ - (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | \ - MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE) - -#define XGXS_RESET_BITS \ - (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB) - -#define SERDES_RESET_BITS \ - (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD) - -#define AUTONEG_CL37 SHARED_HW_CFG_AN_ENABLE_CL37 -#define AUTONEG_CL73 SHARED_HW_CFG_AN_ENABLE_CL73 -#define AUTONEG_BAM SHARED_HW_CFG_AN_ENABLE_BAM -#define AUTONEG_PARALLEL \ - SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION -#define AUTONEG_SGMII_FIBER_AUTODET \ - SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT -#define AUTONEG_REMOTE_PHY SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY - -#define GP_STATUS_PAUSE_RSOLUTION_TXSIDE \ - MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE -#define GP_STATUS_PAUSE_RSOLUTION_RXSIDE \ - MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE -#define GP_STATUS_SPEED_MASK \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK -#define GP_STATUS_10M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M -#define GP_STATUS_100M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M -#define GP_STATUS_1G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G -#define GP_STATUS_2_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G -#define GP_STATUS_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G -#define GP_STATUS_6G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G -#define GP_STATUS_10G_HIG \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG -#define GP_STATUS_10G_CX4 \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 -#define GP_STATUS_1G_KX MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX -#define GP_STATUS_10G_KX4 \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 -#define GP_STATUS_10G_KR MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KR -#define GP_STATUS_10G_XFI MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI -#define GP_STATUS_20G_DXGXS MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS -#define GP_STATUS_10G_SFI MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI -#define LINK_10THD LINK_STATUS_SPEED_AND_DUPLEX_10THD -#define LINK_10TFD LINK_STATUS_SPEED_AND_DUPLEX_10TFD -#define LINK_100TXHD LINK_STATUS_SPEED_AND_DUPLEX_100TXHD -#define LINK_100T4 LINK_STATUS_SPEED_AND_DUPLEX_100T4 -#define LINK_100TXFD LINK_STATUS_SPEED_AND_DUPLEX_100TXFD -#define LINK_1000THD LINK_STATUS_SPEED_AND_DUPLEX_1000THD -#define LINK_1000TFD LINK_STATUS_SPEED_AND_DUPLEX_1000TFD -#define LINK_1000XFD LINK_STATUS_SPEED_AND_DUPLEX_1000XFD -#define LINK_2500THD LINK_STATUS_SPEED_AND_DUPLEX_2500THD -#define LINK_2500TFD LINK_STATUS_SPEED_AND_DUPLEX_2500TFD -#define LINK_2500XFD LINK_STATUS_SPEED_AND_DUPLEX_2500XFD -#define LINK_10GTFD LINK_STATUS_SPEED_AND_DUPLEX_10GTFD -#define LINK_10GXFD LINK_STATUS_SPEED_AND_DUPLEX_10GXFD -#define LINK_20GTFD LINK_STATUS_SPEED_AND_DUPLEX_20GTFD -#define LINK_20GXFD LINK_STATUS_SPEED_AND_DUPLEX_20GXFD - - - -/* */ -#define SFP_EEPROM_CON_TYPE_ADDR 0x2 - #define SFP_EEPROM_CON_TYPE_VAL_LC 0x7 - #define SFP_EEPROM_CON_TYPE_VAL_COPPER 0x21 - - -#define SFP_EEPROM_COMP_CODE_ADDR 0x3 - #define SFP_EEPROM_COMP_CODE_SR_MASK (1<<4) - #define SFP_EEPROM_COMP_CODE_LR_MASK (1<<5) - #define SFP_EEPROM_COMP_CODE_LRM_MASK (1<<6) - -#define SFP_EEPROM_FC_TX_TECH_ADDR 0x8 - #define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE 0x4 - #define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE 0x8 - -#define SFP_EEPROM_OPTIONS_ADDR 0x40 - #define SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK 0x1 -#define SFP_EEPROM_OPTIONS_SIZE 2 - -#define EDC_MODE_LINEAR 0x0022 -#define EDC_MODE_LIMITING 0x0044 -#define EDC_MODE_PASSIVE_DAC 0x0055 - - -/* BRB thresholds for E2*/ -#define PFC_E2_BRB_MAC_PAUSE_XOFF_THR_PAUSE 170 -#define PFC_E2_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE 0 - -#define PFC_E2_BRB_MAC_PAUSE_XON_THR_PAUSE 250 -#define PFC_E2_BRB_MAC_PAUSE_XON_THR_NON_PAUSE 0 - -#define PFC_E2_BRB_MAC_FULL_XOFF_THR_PAUSE 10 -#define PFC_E2_BRB_MAC_FULL_XOFF_THR_NON_PAUSE 90 - -#define PFC_E2_BRB_MAC_FULL_XON_THR_PAUSE 50 -#define PFC_E2_BRB_MAC_FULL_XON_THR_NON_PAUSE 250 - -/* BRB thresholds for E3A0 */ -#define PFC_E3A0_BRB_MAC_PAUSE_XOFF_THR_PAUSE 290 -#define PFC_E3A0_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE 0 - -#define PFC_E3A0_BRB_MAC_PAUSE_XON_THR_PAUSE 410 -#define PFC_E3A0_BRB_MAC_PAUSE_XON_THR_NON_PAUSE 0 - -#define PFC_E3A0_BRB_MAC_FULL_XOFF_THR_PAUSE 10 -#define PFC_E3A0_BRB_MAC_FULL_XOFF_THR_NON_PAUSE 170 - -#define PFC_E3A0_BRB_MAC_FULL_XON_THR_PAUSE 50 -#define PFC_E3A0_BRB_MAC_FULL_XON_THR_NON_PAUSE 410 - - -/* BRB thresholds for E3B0 2 port mode*/ -#define PFC_E3B0_2P_BRB_MAC_PAUSE_XOFF_THR_PAUSE 1025 -#define PFC_E3B0_2P_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE 0 - -#define PFC_E3B0_2P_BRB_MAC_PAUSE_XON_THR_PAUSE 1025 -#define PFC_E3B0_2P_BRB_MAC_PAUSE_XON_THR_NON_PAUSE 0 - -#define PFC_E3B0_2P_BRB_MAC_FULL_XOFF_THR_PAUSE 10 -#define PFC_E3B0_2P_BRB_MAC_FULL_XOFF_THR_NON_PAUSE 1025 - -#define PFC_E3B0_2P_BRB_MAC_FULL_XON_THR_PAUSE 50 -#define PFC_E3B0_2P_BRB_MAC_FULL_XON_THR_NON_PAUSE 1025 - -/* only for E3B0*/ -#define PFC_E3B0_2P_BRB_FULL_LB_XOFF_THR 1025 -#define PFC_E3B0_2P_BRB_FULL_LB_XON_THR 1025 - -/* Lossy +Lossless GUARANTIED == GUART */ -#define PFC_E3B0_2P_MIX_PAUSE_LB_GUART 284 -/* Lossless +Lossless*/ -#define PFC_E3B0_2P_PAUSE_LB_GUART 236 -/* Lossy +Lossy*/ -#define PFC_E3B0_2P_NON_PAUSE_LB_GUART 342 - -/* Lossy +Lossless*/ -#define PFC_E3B0_2P_MIX_PAUSE_MAC_0_CLASS_T_GUART 284 -/* Lossless +Lossless*/ -#define PFC_E3B0_2P_PAUSE_MAC_0_CLASS_T_GUART 236 -/* Lossy +Lossy*/ -#define PFC_E3B0_2P_NON_PAUSE_MAC_0_CLASS_T_GUART 336 -#define PFC_E3B0_2P_BRB_MAC_0_CLASS_T_GUART_HYST 80 - -#define PFC_E3B0_2P_BRB_MAC_1_CLASS_T_GUART 0 -#define PFC_E3B0_2P_BRB_MAC_1_CLASS_T_GUART_HYST 0 - -/* BRB thresholds for E3B0 4 port mode */ -#define PFC_E3B0_4P_BRB_MAC_PAUSE_XOFF_THR_PAUSE 304 -#define PFC_E3B0_4P_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE 0 - -#define PFC_E3B0_4P_BRB_MAC_PAUSE_XON_THR_PAUSE 384 -#define PFC_E3B0_4P_BRB_MAC_PAUSE_XON_THR_NON_PAUSE 0 - -#define PFC_E3B0_4P_BRB_MAC_FULL_XOFF_THR_PAUSE 10 -#define PFC_E3B0_4P_BRB_MAC_FULL_XOFF_THR_NON_PAUSE 304 - -#define PFC_E3B0_4P_BRB_MAC_FULL_XON_THR_PAUSE 50 -#define PFC_E3B0_4P_BRB_MAC_FULL_XON_THR_NON_PAUSE 384 - - -/* only for E3B0*/ -#define PFC_E3B0_4P_BRB_FULL_LB_XOFF_THR 304 -#define PFC_E3B0_4P_BRB_FULL_LB_XON_THR 384 -#define PFC_E3B0_4P_LB_GUART 120 - -#define PFC_E3B0_4P_BRB_MAC_0_CLASS_T_GUART 120 -#define PFC_E3B0_4P_BRB_MAC_0_CLASS_T_GUART_HYST 80 - -#define PFC_E3B0_4P_BRB_MAC_1_CLASS_T_GUART 80 -#define PFC_E3B0_4P_BRB_MAC_1_CLASS_T_GUART_HYST 120 - -#define DCBX_INVALID_COS (0xFF) - -#define ETS_BW_LIMIT_CREDIT_UPPER_BOUND (0x5000) -#define ETS_BW_LIMIT_CREDIT_WEIGHT (0x5000) -#define ETS_E3B0_NIG_MIN_W_VAL_UP_TO_10GBPS (1360) -#define ETS_E3B0_NIG_MIN_W_VAL_20GBPS (2720) -#define ETS_E3B0_PBF_MIN_W_VAL (10000) - -#define MAX_PACKET_SIZE (9700) -#define WC_UC_TIMEOUT 100 - -/**********************************************************/ -/* INTERFACE */ -/**********************************************************/ - -#define CL22_WR_OVER_CL45(_bp, _phy, _bank, _addr, _val) \ - bnx2x_cl45_write(_bp, _phy, \ - (_phy)->def_md_devad, \ - (_bank + (_addr & 0xf)), \ - _val) - -#define CL22_RD_OVER_CL45(_bp, _phy, _bank, _addr, _val) \ - bnx2x_cl45_read(_bp, _phy, \ - (_phy)->def_md_devad, \ - (_bank + (_addr & 0xf)), \ - _val) - -static u32 bnx2x_bits_en(struct bnx2x *bp, u32 reg, u32 bits) -{ - u32 val = REG_RD(bp, reg); - - val |= bits; - REG_WR(bp, reg, val); - return val; -} - -static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits) -{ - u32 val = REG_RD(bp, reg); - - val &= ~bits; - REG_WR(bp, reg, val); - return val; -} - -/******************************************************************/ -/* EPIO/GPIO section */ -/******************************************************************/ -static void bnx2x_get_epio(struct bnx2x *bp, u32 epio_pin, u32 *en) -{ - u32 epio_mask, gp_oenable; - *en = 0; - /* Sanity check */ - if (epio_pin > 31) { - DP(NETIF_MSG_LINK, "Invalid EPIO pin %d to get\n", epio_pin); - return; - } - - epio_mask = 1 << epio_pin; - /* Set this EPIO to output */ - gp_oenable = REG_RD(bp, MCP_REG_MCPR_GP_OENABLE); - REG_WR(bp, MCP_REG_MCPR_GP_OENABLE, gp_oenable & ~epio_mask); - - *en = (REG_RD(bp, MCP_REG_MCPR_GP_INPUTS) & epio_mask) >> epio_pin; -} -static void bnx2x_set_epio(struct bnx2x *bp, u32 epio_pin, u32 en) -{ - u32 epio_mask, gp_output, gp_oenable; - - /* Sanity check */ - if (epio_pin > 31) { - DP(NETIF_MSG_LINK, "Invalid EPIO pin %d to set\n", epio_pin); - return; - } - DP(NETIF_MSG_LINK, "Setting EPIO pin %d to %d\n", epio_pin, en); - epio_mask = 1 << epio_pin; - /* Set this EPIO to output */ - gp_output = REG_RD(bp, MCP_REG_MCPR_GP_OUTPUTS); - if (en) - gp_output |= epio_mask; - else - gp_output &= ~epio_mask; - - REG_WR(bp, MCP_REG_MCPR_GP_OUTPUTS, gp_output); - - /* Set the value for this EPIO */ - gp_oenable = REG_RD(bp, MCP_REG_MCPR_GP_OENABLE); - REG_WR(bp, MCP_REG_MCPR_GP_OENABLE, gp_oenable | epio_mask); -} - -static void bnx2x_set_cfg_pin(struct bnx2x *bp, u32 pin_cfg, u32 val) -{ - if (pin_cfg == PIN_CFG_NA) - return; - if (pin_cfg >= PIN_CFG_EPIO0) { - bnx2x_set_epio(bp, pin_cfg - PIN_CFG_EPIO0, val); - } else { - u8 gpio_num = (pin_cfg - PIN_CFG_GPIO0_P0) & 0x3; - u8 gpio_port = (pin_cfg - PIN_CFG_GPIO0_P0) >> 2; - bnx2x_set_gpio(bp, gpio_num, (u8)val, gpio_port); - } -} - -static u32 bnx2x_get_cfg_pin(struct bnx2x *bp, u32 pin_cfg, u32 *val) -{ - if (pin_cfg == PIN_CFG_NA) - return -EINVAL; - if (pin_cfg >= PIN_CFG_EPIO0) { - bnx2x_get_epio(bp, pin_cfg - PIN_CFG_EPIO0, val); - } else { - u8 gpio_num = (pin_cfg - PIN_CFG_GPIO0_P0) & 0x3; - u8 gpio_port = (pin_cfg - PIN_CFG_GPIO0_P0) >> 2; - *val = bnx2x_get_gpio(bp, gpio_num, gpio_port); - } - return 0; - -} -/******************************************************************/ -/* ETS section */ -/******************************************************************/ -static void bnx2x_ets_e2e3a0_disabled(struct link_params *params) -{ - /* ETS disabled configuration*/ - struct bnx2x *bp = params->bp; - - DP(NETIF_MSG_LINK, "ETS E2E3 disabled configuration\n"); - - /* - * mapping between entry priority to client number (0,1,2 -debug and - * management clients, 3 - COS0 client, 4 - COS client)(HIGHEST) - * 3bits client num. - * PRI4 | PRI3 | PRI2 | PRI1 | PRI0 - * cos1-100 cos0-011 dbg1-010 dbg0-001 MCP-000 - */ - - REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT, 0x4688); - /* - * Bitmap of 5bits length. Each bit specifies whether the entry behaves - * as strict. Bits 0,1,2 - debug and management entries, 3 - - * COS0 entry, 4 - COS1 entry. - * COS1 | COS0 | DEBUG1 | DEBUG0 | MGMT - * bit4 bit3 bit2 bit1 bit0 - * MCP and debug are strict - */ - - REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x7); - /* defines which entries (clients) are subjected to WFQ arbitration */ - REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0); - /* - * For strict priority entries defines the number of consecutive - * slots for the highest priority. - */ - REG_WR(bp, NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100); - /* - * mapping between the CREDIT_WEIGHT registers and actual client - * numbers - */ - REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP, 0); - REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0, 0); - REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1, 0); - - REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0, 0); - REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1, 0); - REG_WR(bp, PBF_REG_HIGH_PRIORITY_COS_NUM, 0); - /* ETS mode disable */ - REG_WR(bp, PBF_REG_ETS_ENABLED, 0); - /* - * If ETS mode is enabled (there is no strict priority) defines a WFQ - * weight for COS0/COS1. - */ - REG_WR(bp, PBF_REG_COS0_WEIGHT, 0x2710); - REG_WR(bp, PBF_REG_COS1_WEIGHT, 0x2710); - /* Upper bound that COS0_WEIGHT can reach in the WFQ arbiter */ - REG_WR(bp, PBF_REG_COS0_UPPER_BOUND, 0x989680); - REG_WR(bp, PBF_REG_COS1_UPPER_BOUND, 0x989680); - /* Defines the number of consecutive slots for the strict priority */ - REG_WR(bp, PBF_REG_NUM_STRICT_ARB_SLOTS, 0); -} -/****************************************************************************** -* Description: -* Getting min_w_val will be set according to line speed . -*. -******************************************************************************/ -static u32 bnx2x_ets_get_min_w_val_nig(const struct link_vars *vars) -{ - u32 min_w_val = 0; - /* Calculate min_w_val.*/ - if (vars->link_up) { - if (SPEED_20000 == vars->line_speed) - min_w_val = ETS_E3B0_NIG_MIN_W_VAL_20GBPS; - else - min_w_val = ETS_E3B0_NIG_MIN_W_VAL_UP_TO_10GBPS; - } else - min_w_val = ETS_E3B0_NIG_MIN_W_VAL_20GBPS; - /** - * If the link isn't up (static configuration for example ) The - * link will be according to 20GBPS. - */ - return min_w_val; -} -/****************************************************************************** -* Description: -* Getting credit upper bound form min_w_val. -*. -******************************************************************************/ -static u32 bnx2x_ets_get_credit_upper_bound(const u32 min_w_val) -{ - const u32 credit_upper_bound = (u32)MAXVAL((150 * min_w_val), - MAX_PACKET_SIZE); - return credit_upper_bound; -} -/****************************************************************************** -* Description: -* Set credit upper bound for NIG. -*. -******************************************************************************/ -static void bnx2x_ets_e3b0_set_credit_upper_bound_nig( - const struct link_params *params, - const u32 min_w_val) -{ - struct bnx2x *bp = params->bp; - const u8 port = params->port; - const u32 credit_upper_bound = - bnx2x_ets_get_credit_upper_bound(min_w_val); - - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_0 : - NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0, credit_upper_bound); - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_1 : - NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1, credit_upper_bound); - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_2 : - NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_2, credit_upper_bound); - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_3 : - NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_3, credit_upper_bound); - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_4 : - NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_4, credit_upper_bound); - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_5 : - NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_5, credit_upper_bound); - - if (0 == port) { - REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_6, - credit_upper_bound); - REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_7, - credit_upper_bound); - REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_8, - credit_upper_bound); - } -} -/****************************************************************************** -* Description: -* Will return the NIG ETS registers to init values.Except -* credit_upper_bound. -* That isn't used in this configuration (No WFQ is enabled) and will be -* configured acording to spec -*. -******************************************************************************/ -static void bnx2x_ets_e3b0_nig_disabled(const struct link_params *params, - const struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - const u8 port = params->port; - const u32 min_w_val = bnx2x_ets_get_min_w_val_nig(vars); - /** - * mapping between entry priority to client number (0,1,2 -debug and - * management clients, 3 - COS0 client, 4 - COS1, ... 8 - - * COS5)(HIGHEST) 4bits client num.TODO_ETS - Should be done by - * reset value or init tool - */ - if (port) { - REG_WR(bp, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB, 0x543210); - REG_WR(bp, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB, 0x0); - } else { - REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB, 0x76543210); - REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB, 0x8); - } - /** - * For strict priority entries defines the number of consecutive - * slots for the highest priority. - */ - /* TODO_ETS - Should be done by reset value or init tool */ - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS : - NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100); - /** - * mapping between the CREDIT_WEIGHT registers and actual client - * numbers - */ - /* TODO_ETS - Should be done by reset value or init tool */ - if (port) { - /*Port 1 has 6 COS*/ - REG_WR(bp, NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_LSB, 0x210543); - REG_WR(bp, NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_MSB, 0x0); - } else { - /*Port 0 has 9 COS*/ - REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_LSB, - 0x43210876); - REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_MSB, 0x5); - } - - /** - * Bitmap of 5bits length. Each bit specifies whether the entry behaves - * as strict. Bits 0,1,2 - debug and management entries, 3 - - * COS0 entry, 4 - COS1 entry. - * COS1 | COS0 | DEBUG1 | DEBUG0 | MGMT - * bit4 bit3 bit2 bit1 bit0 - * MCP and debug are strict - */ - if (port) - REG_WR(bp, NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT, 0x3f); - else - REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x1ff); - /* defines which entries (clients) are subjected to WFQ arbitration */ - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ : - NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0); - - /** - * Please notice the register address are note continuous and a - * for here is note appropriate.In 2 port mode port0 only COS0-5 - * can be used. DEBUG1,DEBUG1,MGMT are never used for WFQ* In 4 - * port mode port1 only COS0-2 can be used. DEBUG1,DEBUG1,MGMT - * are never used for WFQ - */ - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 : - NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0, 0x0); - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 : - NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1, 0x0); - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 : - NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2, 0x0); - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_3 : - NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3, 0x0); - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_4 : - NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4, 0x0); - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_5 : - NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5, 0x0); - if (0 == port) { - REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_6, 0x0); - REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_7, 0x0); - REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_8, 0x0); - } - - bnx2x_ets_e3b0_set_credit_upper_bound_nig(params, min_w_val); -} -/****************************************************************************** -* Description: -* Set credit upper bound for PBF. -*. -******************************************************************************/ -static void bnx2x_ets_e3b0_set_credit_upper_bound_pbf( - const struct link_params *params, - const u32 min_w_val) -{ - struct bnx2x *bp = params->bp; - const u32 credit_upper_bound = - bnx2x_ets_get_credit_upper_bound(min_w_val); - const u8 port = params->port; - u32 base_upper_bound = 0; - u8 max_cos = 0; - u8 i = 0; - /** - * In 2 port mode port0 has COS0-5 that can be used for WFQ.In 4 - * port mode port1 has COS0-2 that can be used for WFQ. - */ - if (0 == port) { - base_upper_bound = PBF_REG_COS0_UPPER_BOUND_P0; - max_cos = DCBX_E3B0_MAX_NUM_COS_PORT0; - } else { - base_upper_bound = PBF_REG_COS0_UPPER_BOUND_P1; - max_cos = DCBX_E3B0_MAX_NUM_COS_PORT1; - } - - for (i = 0; i < max_cos; i++) - REG_WR(bp, base_upper_bound + (i << 2), credit_upper_bound); -} - -/****************************************************************************** -* Description: -* Will return the PBF ETS registers to init values.Except -* credit_upper_bound. -* That isn't used in this configuration (No WFQ is enabled) and will be -* configured acording to spec -*. -******************************************************************************/ -static void bnx2x_ets_e3b0_pbf_disabled(const struct link_params *params) -{ - struct bnx2x *bp = params->bp; - const u8 port = params->port; - const u32 min_w_val_pbf = ETS_E3B0_PBF_MIN_W_VAL; - u8 i = 0; - u32 base_weight = 0; - u8 max_cos = 0; - - /** - * mapping between entry priority to client number 0 - COS0 - * client, 2 - COS1, ... 5 - COS5)(HIGHEST) 4bits client num. - * TODO_ETS - Should be done by reset value or init tool - */ - if (port) - /* 0x688 (|011|0 10|00 1|000) */ - REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 , 0x688); - else - /* (10 1|100 |011|0 10|00 1|000) */ - REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 , 0x2C688); - - /* TODO_ETS - Should be done by reset value or init tool */ - if (port) - /* 0x688 (|011|0 10|00 1|000)*/ - REG_WR(bp, PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P1, 0x688); - else - /* 0x2C688 (10 1|100 |011|0 10|00 1|000) */ - REG_WR(bp, PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P0, 0x2C688); - - REG_WR(bp, (port) ? PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P1 : - PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P0 , 0x100); - - - REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 : - PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 , 0); - - REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 : - PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0 , 0); - /** - * In 2 port mode port0 has COS0-5 that can be used for WFQ. - * In 4 port mode port1 has COS0-2 that can be used for WFQ. - */ - if (0 == port) { - base_weight = PBF_REG_COS0_WEIGHT_P0; - max_cos = DCBX_E3B0_MAX_NUM_COS_PORT0; - } else { - base_weight = PBF_REG_COS0_WEIGHT_P1; - max_cos = DCBX_E3B0_MAX_NUM_COS_PORT1; - } - - for (i = 0; i < max_cos; i++) - REG_WR(bp, base_weight + (0x4 * i), 0); - - bnx2x_ets_e3b0_set_credit_upper_bound_pbf(params, min_w_val_pbf); -} -/****************************************************************************** -* Description: -* E3B0 disable will return basicly the values to init values. -*. -******************************************************************************/ -static int bnx2x_ets_e3b0_disabled(const struct link_params *params, - const struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - - if (!CHIP_IS_E3B0(bp)) { - DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0" - "\n"); - return -EINVAL; - } - - bnx2x_ets_e3b0_nig_disabled(params, vars); - - bnx2x_ets_e3b0_pbf_disabled(params); - - return 0; -} - -/****************************************************************************** -* Description: -* Disable will return basicly the values to init values. -*. -******************************************************************************/ -int bnx2x_ets_disabled(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - int bnx2x_status = 0; - - if ((CHIP_IS_E2(bp)) || (CHIP_IS_E3A0(bp))) - bnx2x_ets_e2e3a0_disabled(params); - else if (CHIP_IS_E3B0(bp)) - bnx2x_status = bnx2x_ets_e3b0_disabled(params, vars); - else { - DP(NETIF_MSG_LINK, "bnx2x_ets_disabled - chip not supported\n"); - return -EINVAL; - } - - return bnx2x_status; -} - -/****************************************************************************** -* Description -* Set the COS mappimg to SP and BW until this point all the COS are not -* set as SP or BW. -******************************************************************************/ -static int bnx2x_ets_e3b0_cli_map(const struct link_params *params, - const struct bnx2x_ets_params *ets_params, - const u8 cos_sp_bitmap, - const u8 cos_bw_bitmap) -{ - struct bnx2x *bp = params->bp; - const u8 port = params->port; - const u8 nig_cli_sp_bitmap = 0x7 | (cos_sp_bitmap << 3); - const u8 pbf_cli_sp_bitmap = cos_sp_bitmap; - const u8 nig_cli_subject2wfq_bitmap = cos_bw_bitmap << 3; - const u8 pbf_cli_subject2wfq_bitmap = cos_bw_bitmap; - - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT : - NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, nig_cli_sp_bitmap); - - REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 : - PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 , pbf_cli_sp_bitmap); - - REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ : - NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, - nig_cli_subject2wfq_bitmap); - - REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 : - PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0, - pbf_cli_subject2wfq_bitmap); - - return 0; -} - -/****************************************************************************** -* Description: -* This function is needed because NIG ARB_CREDIT_WEIGHT_X are -* not continues and ARB_CREDIT_WEIGHT_0 + offset is suitable. -******************************************************************************/ -static int bnx2x_ets_e3b0_set_cos_bw(struct bnx2x *bp, - const u8 cos_entry, - const u32 min_w_val_nig, - const u32 min_w_val_pbf, - const u16 total_bw, - const u8 bw, - const u8 port) -{ - u32 nig_reg_adress_crd_weight = 0; - u32 pbf_reg_adress_crd_weight = 0; - /* Calculate and set BW for this COS*/ - const u32 cos_bw_nig = (bw * min_w_val_nig) / total_bw; - const u32 cos_bw_pbf = (bw * min_w_val_pbf) / total_bw; - - switch (cos_entry) { - case 0: - nig_reg_adress_crd_weight = - (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 : - NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0; - pbf_reg_adress_crd_weight = (port) ? - PBF_REG_COS0_WEIGHT_P1 : PBF_REG_COS0_WEIGHT_P0; - break; - case 1: - nig_reg_adress_crd_weight = (port) ? - NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 : - NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1; - pbf_reg_adress_crd_weight = (port) ? - PBF_REG_COS1_WEIGHT_P1 : PBF_REG_COS1_WEIGHT_P0; - break; - case 2: - nig_reg_adress_crd_weight = (port) ? - NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 : - NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2; - - pbf_reg_adress_crd_weight = (port) ? - PBF_REG_COS2_WEIGHT_P1 : PBF_REG_COS2_WEIGHT_P0; - break; - case 3: - if (port) - return -EINVAL; - nig_reg_adress_crd_weight = - NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3; - pbf_reg_adress_crd_weight = - PBF_REG_COS3_WEIGHT_P0; - break; - case 4: - if (port) - return -EINVAL; - nig_reg_adress_crd_weight = - NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4; - pbf_reg_adress_crd_weight = PBF_REG_COS4_WEIGHT_P0; - break; - case 5: - if (port) - return -EINVAL; - nig_reg_adress_crd_weight = - NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5; - pbf_reg_adress_crd_weight = PBF_REG_COS5_WEIGHT_P0; - break; - } - - REG_WR(bp, nig_reg_adress_crd_weight, cos_bw_nig); - - REG_WR(bp, pbf_reg_adress_crd_weight, cos_bw_pbf); - - return 0; -} -/****************************************************************************** -* Description: -* Calculate the total BW.A value of 0 isn't legal. -*. -******************************************************************************/ -static int bnx2x_ets_e3b0_get_total_bw( - const struct link_params *params, - const struct bnx2x_ets_params *ets_params, - u16 *total_bw) -{ - struct bnx2x *bp = params->bp; - u8 cos_idx = 0; - - *total_bw = 0 ; - /* Calculate total BW requested */ - for (cos_idx = 0; cos_idx < ets_params->num_of_cos; cos_idx++) { - if (bnx2x_cos_state_bw == ets_params->cos[cos_idx].state) { - - if (0 == ets_params->cos[cos_idx].params.bw_params.bw) { - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW" - "was set to 0\n"); - return -EINVAL; - } - *total_bw += - ets_params->cos[cos_idx].params.bw_params.bw; - } - } - - /*Check taotl BW is valid */ - if ((100 != *total_bw) || (0 == *total_bw)) { - if (0 == *total_bw) { - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW" - "shouldn't be 0\n"); - return -EINVAL; - } - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW should be" - "100\n"); - /** - * We can handle a case whre the BW isn't 100 this can happen - * if the TC are joined. - */ - } - return 0; -} - -/****************************************************************************** -* Description: -* Invalidate all the sp_pri_to_cos. -*. -******************************************************************************/ -static void bnx2x_ets_e3b0_sp_pri_to_cos_init(u8 *sp_pri_to_cos) -{ - u8 pri = 0; - for (pri = 0; pri < DCBX_MAX_NUM_COS; pri++) - sp_pri_to_cos[pri] = DCBX_INVALID_COS; -} -/****************************************************************************** -* Description: -* Calculate and set the SP (ARB_PRIORITY_CLIENT) NIG and PBF registers -* according to sp_pri_to_cos. -*. -******************************************************************************/ -static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params, - u8 *sp_pri_to_cos, const u8 pri, - const u8 cos_entry) -{ - struct bnx2x *bp = params->bp; - const u8 port = params->port; - const u8 max_num_of_cos = (port) ? DCBX_E3B0_MAX_NUM_COS_PORT1 : - DCBX_E3B0_MAX_NUM_COS_PORT0; - - if (DCBX_INVALID_COS != sp_pri_to_cos[pri]) { - DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid " - "parameter There can't be two COS's with" - "the same strict pri\n"); - return -EINVAL; - } - - if (pri > max_num_of_cos) { - DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid" - "parameter Illegal strict priority\n"); - return -EINVAL; - } - - sp_pri_to_cos[pri] = cos_entry; - return 0; - -} - -/****************************************************************************** -* Description: -* Returns the correct value according to COS and priority in -* the sp_pri_cli register. -*. -******************************************************************************/ -static u64 bnx2x_e3b0_sp_get_pri_cli_reg(const u8 cos, const u8 cos_offset, - const u8 pri_set, - const u8 pri_offset, - const u8 entry_size) -{ - u64 pri_cli_nig = 0; - pri_cli_nig = ((u64)(cos + cos_offset)) << (entry_size * - (pri_set + pri_offset)); - - return pri_cli_nig; -} -/****************************************************************************** -* Description: -* Returns the correct value according to COS and priority in the -* sp_pri_cli register for NIG. -*. -******************************************************************************/ -static u64 bnx2x_e3b0_sp_get_pri_cli_reg_nig(const u8 cos, const u8 pri_set) -{ - /* MCP Dbg0 and dbg1 are always with higher strict pri*/ - const u8 nig_cos_offset = 3; - const u8 nig_pri_offset = 3; - - return bnx2x_e3b0_sp_get_pri_cli_reg(cos, nig_cos_offset, pri_set, - nig_pri_offset, 4); - -} -/****************************************************************************** -* Description: -* Returns the correct value according to COS and priority in the -* sp_pri_cli register for PBF. -*. -******************************************************************************/ -static u64 bnx2x_e3b0_sp_get_pri_cli_reg_pbf(const u8 cos, const u8 pri_set) -{ - const u8 pbf_cos_offset = 0; - const u8 pbf_pri_offset = 0; - - return bnx2x_e3b0_sp_get_pri_cli_reg(cos, pbf_cos_offset, pri_set, - pbf_pri_offset, 3); - -} - -/****************************************************************************** -* Description: -* Calculate and set the SP (ARB_PRIORITY_CLIENT) NIG and PBF registers -* according to sp_pri_to_cos.(which COS has higher priority) -*. -******************************************************************************/ -static int bnx2x_ets_e3b0_sp_set_pri_cli_reg(const struct link_params *params, - u8 *sp_pri_to_cos) -{ - struct bnx2x *bp = params->bp; - u8 i = 0; - const u8 port = params->port; - /* MCP Dbg0 and dbg1 are always with higher strict pri*/ - u64 pri_cli_nig = 0x210; - u32 pri_cli_pbf = 0x0; - u8 pri_set = 0; - u8 pri_bitmask = 0; - const u8 max_num_of_cos = (port) ? DCBX_E3B0_MAX_NUM_COS_PORT1 : - DCBX_E3B0_MAX_NUM_COS_PORT0; - - u8 cos_bit_to_set = (1 << max_num_of_cos) - 1; - - /* Set all the strict priority first */ - for (i = 0; i < max_num_of_cos; i++) { - if (DCBX_INVALID_COS != sp_pri_to_cos[i]) { - if (DCBX_MAX_NUM_COS <= sp_pri_to_cos[i]) { - DP(NETIF_MSG_LINK, - "bnx2x_ets_e3b0_sp_set_pri_cli_reg " - "invalid cos entry\n"); - return -EINVAL; - } - - pri_cli_nig |= bnx2x_e3b0_sp_get_pri_cli_reg_nig( - sp_pri_to_cos[i], pri_set); - - pri_cli_pbf |= bnx2x_e3b0_sp_get_pri_cli_reg_pbf( - sp_pri_to_cos[i], pri_set); - pri_bitmask = 1 << sp_pri_to_cos[i]; - /* COS is used remove it from bitmap.*/ - if (0 == (pri_bitmask & cos_bit_to_set)) { - DP(NETIF_MSG_LINK, - "bnx2x_ets_e3b0_sp_set_pri_cli_reg " - "invalid There can't be two COS's with" - " the same strict pri\n"); - return -EINVAL; - } - cos_bit_to_set &= ~pri_bitmask; - pri_set++; - } - } - - /* Set all the Non strict priority i= COS*/ - for (i = 0; i < max_num_of_cos; i++) { - pri_bitmask = 1 << i; - /* Check if COS was already used for SP */ - if (pri_bitmask & cos_bit_to_set) { - /* COS wasn't used for SP */ - pri_cli_nig |= bnx2x_e3b0_sp_get_pri_cli_reg_nig( - i, pri_set); - - pri_cli_pbf |= bnx2x_e3b0_sp_get_pri_cli_reg_pbf( - i, pri_set); - /* COS is used remove it from bitmap.*/ - cos_bit_to_set &= ~pri_bitmask; - pri_set++; - } - } - - if (pri_set != max_num_of_cos) { - DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_set_pri_cli_reg not all " - "entries were set\n"); - return -EINVAL; - } - - if (port) { - /* Only 6 usable clients*/ - REG_WR(bp, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB, - (u32)pri_cli_nig); - - REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 , pri_cli_pbf); - } else { - /* Only 9 usable clients*/ - const u32 pri_cli_nig_lsb = (u32) (pri_cli_nig); - const u32 pri_cli_nig_msb = (u32) ((pri_cli_nig >> 32) & 0xF); - - REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB, - pri_cli_nig_lsb); - REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB, - pri_cli_nig_msb); - - REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 , pri_cli_pbf); - } - return 0; -} - -/****************************************************************************** -* Description: -* Configure the COS to ETS according to BW and SP settings. -******************************************************************************/ -int bnx2x_ets_e3b0_config(const struct link_params *params, - const struct link_vars *vars, - const struct bnx2x_ets_params *ets_params) -{ - struct bnx2x *bp = params->bp; - int bnx2x_status = 0; - const u8 port = params->port; - u16 total_bw = 0; - const u32 min_w_val_nig = bnx2x_ets_get_min_w_val_nig(vars); - const u32 min_w_val_pbf = ETS_E3B0_PBF_MIN_W_VAL; - u8 cos_bw_bitmap = 0; - u8 cos_sp_bitmap = 0; - u8 sp_pri_to_cos[DCBX_MAX_NUM_COS] = {0}; - const u8 max_num_of_cos = (port) ? DCBX_E3B0_MAX_NUM_COS_PORT1 : - DCBX_E3B0_MAX_NUM_COS_PORT0; - u8 cos_entry = 0; - - if (!CHIP_IS_E3B0(bp)) { - DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0" - "\n"); - return -EINVAL; - } - - if ((ets_params->num_of_cos > max_num_of_cos)) { - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config the number of COS " - "isn't supported\n"); - return -EINVAL; - } - - /* Prepare sp strict priority parameters*/ - bnx2x_ets_e3b0_sp_pri_to_cos_init(sp_pri_to_cos); - - /* Prepare BW parameters*/ - bnx2x_status = bnx2x_ets_e3b0_get_total_bw(params, ets_params, - &total_bw); - if (0 != bnx2x_status) { - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config get_total_bw failed " - "\n"); - return -EINVAL; - } - - /** - * Upper bound is set according to current link speed (min_w_val - * should be the same for upper bound and COS credit val). - */ - bnx2x_ets_e3b0_set_credit_upper_bound_nig(params, min_w_val_nig); - bnx2x_ets_e3b0_set_credit_upper_bound_pbf(params, min_w_val_pbf); - - - for (cos_entry = 0; cos_entry < ets_params->num_of_cos; cos_entry++) { - if (bnx2x_cos_state_bw == ets_params->cos[cos_entry].state) { - cos_bw_bitmap |= (1 << cos_entry); - /** - * The function also sets the BW in HW(not the mappin - * yet) - */ - bnx2x_status = bnx2x_ets_e3b0_set_cos_bw( - bp, cos_entry, min_w_val_nig, min_w_val_pbf, - total_bw, - ets_params->cos[cos_entry].params.bw_params.bw, - port); - } else if (bnx2x_cos_state_strict == - ets_params->cos[cos_entry].state){ - cos_sp_bitmap |= (1 << cos_entry); - - bnx2x_status = bnx2x_ets_e3b0_sp_pri_to_cos_set( - params, - sp_pri_to_cos, - ets_params->cos[cos_entry].params.sp_params.pri, - cos_entry); - - } else { - DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config cos state not" - " valid\n"); - return -EINVAL; - } - if (0 != bnx2x_status) { - DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config set cos bw " - "failed\n"); - return bnx2x_status; - } - } - - /* Set SP register (which COS has higher priority) */ - bnx2x_status = bnx2x_ets_e3b0_sp_set_pri_cli_reg(params, - sp_pri_to_cos); - - if (0 != bnx2x_status) { - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config set_pri_cli_reg " - "failed\n"); - return bnx2x_status; - } - - /* Set client mapping of BW and strict */ - bnx2x_status = bnx2x_ets_e3b0_cli_map(params, ets_params, - cos_sp_bitmap, - cos_bw_bitmap); - - if (0 != bnx2x_status) { - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config SP failed\n"); - return bnx2x_status; - } - return 0; -} -static void bnx2x_ets_bw_limit_common(const struct link_params *params) -{ - /* ETS disabled configuration */ - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "ETS enabled BW limit configuration\n"); - /* - * defines which entries (clients) are subjected to WFQ arbitration - * COS0 0x8 - * COS1 0x10 - */ - REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0x18); - /* - * mapping between the ARB_CREDIT_WEIGHT registers and actual - * client numbers (WEIGHT_0 does not actually have to represent - * client 0) - * PRI4 | PRI3 | PRI2 | PRI1 | PRI0 - * cos1-001 cos0-000 dbg1-100 dbg0-011 MCP-010 - */ - REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP, 0x111A); - - REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0, - ETS_BW_LIMIT_CREDIT_UPPER_BOUND); - REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1, - ETS_BW_LIMIT_CREDIT_UPPER_BOUND); - - /* ETS mode enabled*/ - REG_WR(bp, PBF_REG_ETS_ENABLED, 1); - - /* Defines the number of consecutive slots for the strict priority */ - REG_WR(bp, PBF_REG_NUM_STRICT_ARB_SLOTS, 0); - /* - * Bitmap of 5bits length. Each bit specifies whether the entry behaves - * as strict. Bits 0,1,2 - debug and management entries, 3 - COS0 - * entry, 4 - COS1 entry. - * COS1 | COS0 | DEBUG21 | DEBUG0 | MGMT - * bit4 bit3 bit2 bit1 bit0 - * MCP and debug are strict - */ - REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x7); - - /* Upper bound that COS0_WEIGHT can reach in the WFQ arbiter.*/ - REG_WR(bp, PBF_REG_COS0_UPPER_BOUND, - ETS_BW_LIMIT_CREDIT_UPPER_BOUND); - REG_WR(bp, PBF_REG_COS1_UPPER_BOUND, - ETS_BW_LIMIT_CREDIT_UPPER_BOUND); -} - -void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw, - const u32 cos1_bw) -{ - /* ETS disabled configuration*/ - struct bnx2x *bp = params->bp; - const u32 total_bw = cos0_bw + cos1_bw; - u32 cos0_credit_weight = 0; - u32 cos1_credit_weight = 0; - - DP(NETIF_MSG_LINK, "ETS enabled BW limit configuration\n"); - - if ((0 == total_bw) || - (0 == cos0_bw) || - (0 == cos1_bw)) { - DP(NETIF_MSG_LINK, "Total BW can't be zero\n"); - return; - } - - cos0_credit_weight = (cos0_bw * ETS_BW_LIMIT_CREDIT_WEIGHT)/ - total_bw; - cos1_credit_weight = (cos1_bw * ETS_BW_LIMIT_CREDIT_WEIGHT)/ - total_bw; - - bnx2x_ets_bw_limit_common(params); - - REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0, cos0_credit_weight); - REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1, cos1_credit_weight); - - REG_WR(bp, PBF_REG_COS0_WEIGHT, cos0_credit_weight); - REG_WR(bp, PBF_REG_COS1_WEIGHT, cos1_credit_weight); -} - -int bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos) -{ - /* ETS disabled configuration*/ - struct bnx2x *bp = params->bp; - u32 val = 0; - - DP(NETIF_MSG_LINK, "ETS enabled strict configuration\n"); - /* - * Bitmap of 5bits length. Each bit specifies whether the entry behaves - * as strict. Bits 0,1,2 - debug and management entries, - * 3 - COS0 entry, 4 - COS1 entry. - * COS1 | COS0 | DEBUG21 | DEBUG0 | MGMT - * bit4 bit3 bit2 bit1 bit0 - * MCP and debug are strict - */ - REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x1F); - /* - * For strict priority entries defines the number of consecutive slots - * for the highest priority. - */ - REG_WR(bp, NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100); - /* ETS mode disable */ - REG_WR(bp, PBF_REG_ETS_ENABLED, 0); - /* Defines the number of consecutive slots for the strict priority */ - REG_WR(bp, PBF_REG_NUM_STRICT_ARB_SLOTS, 0x100); - - /* Defines the number of consecutive slots for the strict priority */ - REG_WR(bp, PBF_REG_HIGH_PRIORITY_COS_NUM, strict_cos); - - /* - * mapping between entry priority to client number (0,1,2 -debug and - * management clients, 3 - COS0 client, 4 - COS client)(HIGHEST) - * 3bits client num. - * PRI4 | PRI3 | PRI2 | PRI1 | PRI0 - * dbg0-010 dbg1-001 cos1-100 cos0-011 MCP-000 - * dbg0-010 dbg1-001 cos0-011 cos1-100 MCP-000 - */ - val = (0 == strict_cos) ? 0x2318 : 0x22E0; - REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT, val); - - return 0; -} -/******************************************************************/ -/* PFC section */ -/******************************************************************/ - -static void bnx2x_update_pfc_xmac(struct link_params *params, - struct link_vars *vars, - u8 is_lb) -{ - struct bnx2x *bp = params->bp; - u32 xmac_base; - u32 pause_val, pfc0_val, pfc1_val; - - /* XMAC base adrr */ - xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; - - /* Initialize pause and pfc registers */ - pause_val = 0x18000; - pfc0_val = 0xFFFF8000; - pfc1_val = 0x2; - - /* No PFC support */ - if (!(params->feature_config_flags & - FEATURE_CONFIG_PFC_ENABLED)) { - - /* - * RX flow control - Process pause frame in receive direction - */ - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) - pause_val |= XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN; - - /* - * TX flow control - Send pause packet when buffer is full - */ - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) - pause_val |= XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN; - } else {/* PFC support */ - pfc1_val |= XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN | - XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN | - XMAC_PFC_CTRL_HI_REG_RX_PFC_EN | - XMAC_PFC_CTRL_HI_REG_TX_PFC_EN; - } - - /* Write pause and PFC registers */ - REG_WR(bp, xmac_base + XMAC_REG_PAUSE_CTRL, pause_val); - REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL, pfc0_val); - REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI, pfc1_val); - - - /* Set MAC address for source TX Pause/PFC frames */ - REG_WR(bp, xmac_base + XMAC_REG_CTRL_SA_LO, - ((params->mac_addr[2] << 24) | - (params->mac_addr[3] << 16) | - (params->mac_addr[4] << 8) | - (params->mac_addr[5]))); - REG_WR(bp, xmac_base + XMAC_REG_CTRL_SA_HI, - ((params->mac_addr[0] << 8) | - (params->mac_addr[1]))); - - udelay(30); -} - - -static void bnx2x_emac_get_pfc_stat(struct link_params *params, - u32 pfc_frames_sent[2], - u32 pfc_frames_received[2]) -{ - /* Read pfc statistic */ - struct bnx2x *bp = params->bp; - u32 emac_base = params->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 val_xon = 0; - u32 val_xoff = 0; - - DP(NETIF_MSG_LINK, "pfc statistic read from EMAC\n"); - - /* PFC received frames */ - val_xoff = REG_RD(bp, emac_base + - EMAC_REG_RX_PFC_STATS_XOFF_RCVD); - val_xoff &= EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT; - val_xon = REG_RD(bp, emac_base + EMAC_REG_RX_PFC_STATS_XON_RCVD); - val_xon &= EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT; - - pfc_frames_received[0] = val_xon + val_xoff; - - /* PFC received sent */ - val_xoff = REG_RD(bp, emac_base + - EMAC_REG_RX_PFC_STATS_XOFF_SENT); - val_xoff &= EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT; - val_xon = REG_RD(bp, emac_base + EMAC_REG_RX_PFC_STATS_XON_SENT); - val_xon &= EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT; - - pfc_frames_sent[0] = val_xon + val_xoff; -} - -/* Read pfc statistic*/ -void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars, - u32 pfc_frames_sent[2], - u32 pfc_frames_received[2]) -{ - /* Read pfc statistic */ - struct bnx2x *bp = params->bp; - - DP(NETIF_MSG_LINK, "pfc statistic\n"); - - if (!vars->link_up) - return; - - if (MAC_TYPE_EMAC == vars->mac_type) { - DP(NETIF_MSG_LINK, "About to read PFC stats from EMAC\n"); - bnx2x_emac_get_pfc_stat(params, pfc_frames_sent, - pfc_frames_received); - } -} -/******************************************************************/ -/* MAC/PBF section */ -/******************************************************************/ -static void bnx2x_set_mdio_clk(struct bnx2x *bp, u32 chip_id, u8 port) -{ - u32 mode, emac_base; - /** - * Set clause 45 mode, slow down the MDIO clock to 2.5MHz - * (a value of 49==0x31) and make sure that the AUTO poll is off - */ - - if (CHIP_IS_E2(bp)) - emac_base = GRCBASE_EMAC0; - else - emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - mode = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - mode &= ~(EMAC_MDIO_MODE_AUTO_POLL | - EMAC_MDIO_MODE_CLOCK_CNT); - if (USES_WARPCORE(bp)) - mode |= (74L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT); - else - mode |= (49L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT); - - mode |= (EMAC_MDIO_MODE_CLAUSE_45); - REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE, mode); - - udelay(40); -} - -static void bnx2x_emac_init(struct link_params *params, - struct link_vars *vars) -{ - /* reset and unreset the emac core */ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 val; - u16 timeout; - - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port)); - udelay(5); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, - (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port)); - - /* init emac - use read-modify-write */ - /* self clear reset */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); - EMAC_WR(bp, EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET)); - - timeout = 200; - do { - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); - DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val); - if (!timeout) { - DP(NETIF_MSG_LINK, "EMAC timeout!\n"); - return; - } - timeout--; - } while (val & EMAC_MODE_RESET); - bnx2x_set_mdio_clk(bp, params->chip_id, port); - /* Set mac address */ - val = ((params->mac_addr[0] << 8) | - params->mac_addr[1]); - EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH, val); - - val = ((params->mac_addr[2] << 24) | - (params->mac_addr[3] << 16) | - (params->mac_addr[4] << 8) | - params->mac_addr[5]); - EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + 4, val); -} - -static void bnx2x_set_xumac_nig(struct link_params *params, - u16 tx_pause_en, - u8 enable) -{ - struct bnx2x *bp = params->bp; - - REG_WR(bp, params->port ? NIG_REG_P1_MAC_IN_EN : NIG_REG_P0_MAC_IN_EN, - enable); - REG_WR(bp, params->port ? NIG_REG_P1_MAC_OUT_EN : NIG_REG_P0_MAC_OUT_EN, - enable); - REG_WR(bp, params->port ? NIG_REG_P1_MAC_PAUSE_OUT_EN : - NIG_REG_P0_MAC_PAUSE_OUT_EN, tx_pause_en); -} - -static void bnx2x_umac_enable(struct link_params *params, - struct link_vars *vars, u8 lb) -{ - u32 val; - u32 umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; - struct bnx2x *bp = params->bp; - /* Reset UMAC */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port)); - usleep_range(1000, 1000); - - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, - (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port)); - - DP(NETIF_MSG_LINK, "enabling UMAC\n"); - - /** - * This register determines on which events the MAC will assert - * error on the i/f to the NIG along w/ EOP. - */ - - /** - * BD REG_WR(bp, NIG_REG_P0_MAC_RSV_ERR_MASK + - * params->port*0x14, 0xfffff. - */ - /* This register opens the gate for the UMAC despite its name */ - REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 1); - - val = UMAC_COMMAND_CONFIG_REG_PROMIS_EN | - UMAC_COMMAND_CONFIG_REG_PAD_EN | - UMAC_COMMAND_CONFIG_REG_SW_RESET | - UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK; - switch (vars->line_speed) { - case SPEED_10: - val |= (0<<2); - break; - case SPEED_100: - val |= (1<<2); - break; - case SPEED_1000: - val |= (2<<2); - break; - case SPEED_2500: - val |= (3<<2); - break; - default: - DP(NETIF_MSG_LINK, "Invalid speed for UMAC %d\n", - vars->line_speed); - break; - } - if (!(vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) - val |= UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE; - - if (!(vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)) - val |= UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE; - - REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val); - udelay(50); - - /* Set MAC address for source TX Pause/PFC frames (under SW reset) */ - REG_WR(bp, umac_base + UMAC_REG_MAC_ADDR0, - ((params->mac_addr[2] << 24) | - (params->mac_addr[3] << 16) | - (params->mac_addr[4] << 8) | - (params->mac_addr[5]))); - REG_WR(bp, umac_base + UMAC_REG_MAC_ADDR1, - ((params->mac_addr[0] << 8) | - (params->mac_addr[1]))); - - /* Enable RX and TX */ - val &= ~UMAC_COMMAND_CONFIG_REG_PAD_EN; - val |= UMAC_COMMAND_CONFIG_REG_TX_ENA | - UMAC_COMMAND_CONFIG_REG_RX_ENA; - REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val); - udelay(50); - - /* Remove SW Reset */ - val &= ~UMAC_COMMAND_CONFIG_REG_SW_RESET; - - /* Check loopback mode */ - if (lb) - val |= UMAC_COMMAND_CONFIG_REG_LOOP_ENA; - REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val); - - /* - * Maximum Frame Length (RW). Defines a 14-Bit maximum frame - * length used by the MAC receive logic to check frames. - */ - REG_WR(bp, umac_base + UMAC_REG_MAXFR, 0x2710); - bnx2x_set_xumac_nig(params, - ((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1); - vars->mac_type = MAC_TYPE_UMAC; - -} - -static u8 bnx2x_is_4_port_mode(struct bnx2x *bp) -{ - u32 port4mode_ovwr_val; - /* Check 4-port override enabled */ - port4mode_ovwr_val = REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR); - if (port4mode_ovwr_val & (1<<0)) { - /* Return 4-port mode override value */ - return ((port4mode_ovwr_val & (1<<1)) == (1<<1)); - } - /* Return 4-port mode from input pin */ - return (u8)REG_RD(bp, MISC_REG_PORT4MODE_EN); -} - -/* Define the XMAC mode */ -static void bnx2x_xmac_init(struct bnx2x *bp, u32 max_speed) -{ - u32 is_port4mode = bnx2x_is_4_port_mode(bp); - - /** - * In 4-port mode, need to set the mode only once, so if XMAC is - * already out of reset, it means the mode has already been set, - * and it must not* reset the XMAC again, since it controls both - * ports of the path - **/ - - if (is_port4mode && (REG_RD(bp, MISC_REG_RESET_REG_2) & - MISC_REGISTERS_RESET_REG_2_XMAC)) { - DP(NETIF_MSG_LINK, "XMAC already out of reset" - " in 4-port mode\n"); - return; - } - - /* Hard reset */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - MISC_REGISTERS_RESET_REG_2_XMAC); - usleep_range(1000, 1000); - - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, - MISC_REGISTERS_RESET_REG_2_XMAC); - if (is_port4mode) { - DP(NETIF_MSG_LINK, "Init XMAC to 2 ports x 10G per path\n"); - - /* Set the number of ports on the system side to up to 2 */ - REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 1); - - /* Set the number of ports on the Warp Core to 10G */ - REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 3); - } else { - /* Set the number of ports on the system side to 1 */ - REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 0); - if (max_speed == SPEED_10000) { - DP(NETIF_MSG_LINK, "Init XMAC to 10G x 1" - " port per path\n"); - /* Set the number of ports on the Warp Core to 10G */ - REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 3); - } else { - DP(NETIF_MSG_LINK, "Init XMAC to 20G x 2 ports" - " per path\n"); - /* Set the number of ports on the Warp Core to 20G */ - REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 1); - } - } - /* Soft reset */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - MISC_REGISTERS_RESET_REG_2_XMAC_SOFT); - usleep_range(1000, 1000); - - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, - MISC_REGISTERS_RESET_REG_2_XMAC_SOFT); - -} - -static void bnx2x_xmac_disable(struct link_params *params) -{ - u8 port = params->port; - struct bnx2x *bp = params->bp; - u32 pfc_ctrl, xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; - - if (REG_RD(bp, MISC_REG_RESET_REG_2) & - MISC_REGISTERS_RESET_REG_2_XMAC) { - /* - * Send an indication to change the state in the NIG back to XON - * Clearing this bit enables the next set of this bit to get - * rising edge - */ - pfc_ctrl = REG_RD(bp, xmac_base + XMAC_REG_PFC_CTRL_HI); - REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI, - (pfc_ctrl & ~(1<<1))); - REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI, - (pfc_ctrl | (1<<1))); - DP(NETIF_MSG_LINK, "Disable XMAC on port %x\n", port); - REG_WR(bp, xmac_base + XMAC_REG_CTRL, 0); - usleep_range(1000, 1000); - bnx2x_set_xumac_nig(params, 0, 0); - REG_WR(bp, xmac_base + XMAC_REG_CTRL, - XMAC_CTRL_REG_SOFT_RESET); - } -} - -static int bnx2x_xmac_enable(struct link_params *params, - struct link_vars *vars, u8 lb) -{ - u32 val, xmac_base; - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "enabling XMAC\n"); - - xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; - - bnx2x_xmac_init(bp, vars->line_speed); - - /* - * This register determines on which events the MAC will assert - * error on the i/f to the NIG along w/ EOP. - */ - - /* - * This register tells the NIG whether to send traffic to UMAC - * or XMAC - */ - REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 0); - - /* Set Max packet size */ - REG_WR(bp, xmac_base + XMAC_REG_RX_MAX_SIZE, 0x2710); - - /* CRC append for Tx packets */ - REG_WR(bp, xmac_base + XMAC_REG_TX_CTRL, 0xC800); - - /* update PFC */ - bnx2x_update_pfc_xmac(params, vars, 0); - - /* Enable TX and RX */ - val = XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN; - - /* Check loopback mode */ - if (lb) - val |= XMAC_CTRL_REG_CORE_LOCAL_LPBK; - REG_WR(bp, xmac_base + XMAC_REG_CTRL, val); - bnx2x_set_xumac_nig(params, - ((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1); - - vars->mac_type = MAC_TYPE_XMAC; - - return 0; -} -static int bnx2x_emac_enable(struct link_params *params, - struct link_vars *vars, u8 lb) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 val; - - DP(NETIF_MSG_LINK, "enabling EMAC\n"); - - /* Disable BMAC */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - - /* enable emac and not bmac */ - REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 1); - - /* ASIC */ - if (vars->phy_flags & PHY_XGXS_FLAG) { - u32 ser_lane = ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - - DP(NETIF_MSG_LINK, "XGXS\n"); - /* select the master lanes (out of 0-3) */ - REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, ser_lane); - /* select XGXS */ - REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1); - - } else { /* SerDes */ - DP(NETIF_MSG_LINK, "SerDes\n"); - /* select SerDes */ - REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0); - } - - bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_RX_MODE, - EMAC_RX_MODE_RESET); - bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_TX_MODE, - EMAC_TX_MODE_RESET); - - if (CHIP_REV_IS_SLOW(bp)) { - /* config GMII mode */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); - EMAC_WR(bp, EMAC_REG_EMAC_MODE, (val | EMAC_MODE_PORT_GMII)); - } else { /* ASIC */ - /* pause enable/disable */ - bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE, - EMAC_RX_MODE_FLOW_EN); - - bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_TX_MODE, - (EMAC_TX_MODE_EXT_PAUSE_EN | - EMAC_TX_MODE_FLOW_EN)); - if (!(params->feature_config_flags & - FEATURE_CONFIG_PFC_ENABLED)) { - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) - bnx2x_bits_en(bp, emac_base + - EMAC_REG_EMAC_RX_MODE, - EMAC_RX_MODE_FLOW_EN); - - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) - bnx2x_bits_en(bp, emac_base + - EMAC_REG_EMAC_TX_MODE, - (EMAC_TX_MODE_EXT_PAUSE_EN | - EMAC_TX_MODE_FLOW_EN)); - } else - bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_TX_MODE, - EMAC_TX_MODE_FLOW_EN); - } - - /* KEEP_VLAN_TAG, promiscuous */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE); - val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS; - - /* - * Setting this bit causes MAC control frames (except for pause - * frames) to be passed on for processing. This setting has no - * affect on the operation of the pause frames. This bit effects - * all packets regardless of RX Parser packet sorting logic. - * Turn the PFC off to make sure we are in Xon state before - * enabling it. - */ - EMAC_WR(bp, EMAC_REG_RX_PFC_MODE, 0); - if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) { - DP(NETIF_MSG_LINK, "PFC is enabled\n"); - /* Enable PFC again */ - EMAC_WR(bp, EMAC_REG_RX_PFC_MODE, - EMAC_REG_RX_PFC_MODE_RX_EN | - EMAC_REG_RX_PFC_MODE_TX_EN | - EMAC_REG_RX_PFC_MODE_PRIORITIES); - - EMAC_WR(bp, EMAC_REG_RX_PFC_PARAM, - ((0x0101 << - EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT) | - (0x00ff << - EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT))); - val |= EMAC_RX_MODE_KEEP_MAC_CONTROL; - } - EMAC_WR(bp, EMAC_REG_EMAC_RX_MODE, val); - - /* Set Loopback */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); - if (lb) - val |= 0x810; - else - val &= ~0x810; - EMAC_WR(bp, EMAC_REG_EMAC_MODE, val); - - /* enable emac */ - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1); - - /* enable emac for jumbo packets */ - EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE, - (EMAC_RX_MTU_SIZE_JUMBO_ENA | - (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD))); - - /* strip CRC */ - REG_WR(bp, NIG_REG_NIG_INGRESS_EMAC0_NO_CRC + port*4, 0x1); - - /* disable the NIG in/out to the bmac */ - REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0x0); - REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, 0x0); - REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0x0); - - /* enable the NIG in/out to the emac */ - REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x1); - val = 0; - if ((params->feature_config_flags & - FEATURE_CONFIG_PFC_ENABLED) || - (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) - val = 1; - - REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val); - REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x1); - - REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x0); - - vars->mac_type = MAC_TYPE_EMAC; - return 0; -} - -static void bnx2x_update_pfc_bmac1(struct link_params *params, - struct link_vars *vars) -{ - u32 wb_data[2]; - struct bnx2x *bp = params->bp; - u32 bmac_addr = params->port ? NIG_REG_INGRESS_BMAC1_MEM : - NIG_REG_INGRESS_BMAC0_MEM; - - u32 val = 0x14; - if ((!(params->feature_config_flags & - FEATURE_CONFIG_PFC_ENABLED)) && - (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)) - /* Enable BigMAC to react on received Pause packets */ - val |= (1<<5); - wb_data[0] = val; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_CONTROL, wb_data, 2); - - /* tx control */ - val = 0xc0; - if (!(params->feature_config_flags & - FEATURE_CONFIG_PFC_ENABLED) && - (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) - val |= 0x800000; - wb_data[0] = val; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_CONTROL, wb_data, 2); -} - -static void bnx2x_update_pfc_bmac2(struct link_params *params, - struct link_vars *vars, - u8 is_lb) -{ - /* - * Set rx control: Strip CRC and enable BigMAC to relay - * control packets to the system as well - */ - u32 wb_data[2]; - struct bnx2x *bp = params->bp; - u32 bmac_addr = params->port ? NIG_REG_INGRESS_BMAC1_MEM : - NIG_REG_INGRESS_BMAC0_MEM; - u32 val = 0x14; - - if ((!(params->feature_config_flags & - FEATURE_CONFIG_PFC_ENABLED)) && - (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)) - /* Enable BigMAC to react on received Pause packets */ - val |= (1<<5); - wb_data[0] = val; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_CONTROL, wb_data, 2); - udelay(30); - - /* Tx control */ - val = 0xc0; - if (!(params->feature_config_flags & - FEATURE_CONFIG_PFC_ENABLED) && - (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) - val |= 0x800000; - wb_data[0] = val; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_TX_CONTROL, wb_data, 2); - - if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) { - DP(NETIF_MSG_LINK, "PFC is enabled\n"); - /* Enable PFC RX & TX & STATS and set 8 COS */ - wb_data[0] = 0x0; - wb_data[0] |= (1<<0); /* RX */ - wb_data[0] |= (1<<1); /* TX */ - wb_data[0] |= (1<<2); /* Force initial Xon */ - wb_data[0] |= (1<<3); /* 8 cos */ - wb_data[0] |= (1<<5); /* STATS */ - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_PFC_CONTROL, - wb_data, 2); - /* Clear the force Xon */ - wb_data[0] &= ~(1<<2); - } else { - DP(NETIF_MSG_LINK, "PFC is disabled\n"); - /* disable PFC RX & TX & STATS and set 8 COS */ - wb_data[0] = 0x8; - wb_data[1] = 0; - } - - REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_PFC_CONTROL, wb_data, 2); - - /* - * Set Time (based unit is 512 bit time) between automatic - * re-sending of PP packets amd enable automatic re-send of - * Per-Priroity Packet as long as pp_gen is asserted and - * pp_disable is low. - */ - val = 0x8000; - if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) - val |= (1<<16); /* enable automatic re-send */ - - wb_data[0] = val; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_TX_PAUSE_CONTROL, - wb_data, 2); - - /* mac control */ - val = 0x3; /* Enable RX and TX */ - if (is_lb) { - val |= 0x4; /* Local loopback */ - DP(NETIF_MSG_LINK, "enable bmac loopback\n"); - } - /* When PFC enabled, Pass pause frames towards the NIG. */ - if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) - val |= ((1<<6)|(1<<5)); - - wb_data[0] = val; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_BMAC_CONTROL, wb_data, 2); -} - - -/* PFC BRB internal port configuration params */ -struct bnx2x_pfc_brb_threshold_val { - u32 pause_xoff; - u32 pause_xon; - u32 full_xoff; - u32 full_xon; -}; - -struct bnx2x_pfc_brb_e3b0_val { - u32 full_lb_xoff_th; - u32 full_lb_xon_threshold; - u32 lb_guarantied; - u32 mac_0_class_t_guarantied; - u32 mac_0_class_t_guarantied_hyst; - u32 mac_1_class_t_guarantied; - u32 mac_1_class_t_guarantied_hyst; -}; - -struct bnx2x_pfc_brb_th_val { - struct bnx2x_pfc_brb_threshold_val pauseable_th; - struct bnx2x_pfc_brb_threshold_val non_pauseable_th; -}; -static int bnx2x_pfc_brb_get_config_params( - struct link_params *params, - struct bnx2x_pfc_brb_th_val *config_val) -{ - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "Setting PFC BRB configuration\n"); - if (CHIP_IS_E2(bp)) { - config_val->pauseable_th.pause_xoff = - PFC_E2_BRB_MAC_PAUSE_XOFF_THR_PAUSE; - config_val->pauseable_th.pause_xon = - PFC_E2_BRB_MAC_PAUSE_XON_THR_PAUSE; - config_val->pauseable_th.full_xoff = - PFC_E2_BRB_MAC_FULL_XOFF_THR_PAUSE; - config_val->pauseable_th.full_xon = - PFC_E2_BRB_MAC_FULL_XON_THR_PAUSE; - /* non pause able*/ - config_val->non_pauseable_th.pause_xoff = - PFC_E2_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE; - config_val->non_pauseable_th.pause_xon = - PFC_E2_BRB_MAC_PAUSE_XON_THR_NON_PAUSE; - config_val->non_pauseable_th.full_xoff = - PFC_E2_BRB_MAC_FULL_XOFF_THR_NON_PAUSE; - config_val->non_pauseable_th.full_xon = - PFC_E2_BRB_MAC_FULL_XON_THR_NON_PAUSE; - } else if (CHIP_IS_E3A0(bp)) { - config_val->pauseable_th.pause_xoff = - PFC_E3A0_BRB_MAC_PAUSE_XOFF_THR_PAUSE; - config_val->pauseable_th.pause_xon = - PFC_E3A0_BRB_MAC_PAUSE_XON_THR_PAUSE; - config_val->pauseable_th.full_xoff = - PFC_E3A0_BRB_MAC_FULL_XOFF_THR_PAUSE; - config_val->pauseable_th.full_xon = - PFC_E3A0_BRB_MAC_FULL_XON_THR_PAUSE; - /* non pause able*/ - config_val->non_pauseable_th.pause_xoff = - PFC_E3A0_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE; - config_val->non_pauseable_th.pause_xon = - PFC_E3A0_BRB_MAC_PAUSE_XON_THR_NON_PAUSE; - config_val->non_pauseable_th.full_xoff = - PFC_E3A0_BRB_MAC_FULL_XOFF_THR_NON_PAUSE; - config_val->non_pauseable_th.full_xon = - PFC_E3A0_BRB_MAC_FULL_XON_THR_NON_PAUSE; - } else if (CHIP_IS_E3B0(bp)) { - if (params->phy[INT_PHY].flags & - FLAGS_4_PORT_MODE) { - config_val->pauseable_th.pause_xoff = - PFC_E3B0_4P_BRB_MAC_PAUSE_XOFF_THR_PAUSE; - config_val->pauseable_th.pause_xon = - PFC_E3B0_4P_BRB_MAC_PAUSE_XON_THR_PAUSE; - config_val->pauseable_th.full_xoff = - PFC_E3B0_4P_BRB_MAC_FULL_XOFF_THR_PAUSE; - config_val->pauseable_th.full_xon = - PFC_E3B0_4P_BRB_MAC_FULL_XON_THR_PAUSE; - /* non pause able*/ - config_val->non_pauseable_th.pause_xoff = - PFC_E3B0_4P_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE; - config_val->non_pauseable_th.pause_xon = - PFC_E3B0_4P_BRB_MAC_PAUSE_XON_THR_NON_PAUSE; - config_val->non_pauseable_th.full_xoff = - PFC_E3B0_4P_BRB_MAC_FULL_XOFF_THR_NON_PAUSE; - config_val->non_pauseable_th.full_xon = - PFC_E3B0_4P_BRB_MAC_FULL_XON_THR_NON_PAUSE; - } else { - config_val->pauseable_th.pause_xoff = - PFC_E3B0_2P_BRB_MAC_PAUSE_XOFF_THR_PAUSE; - config_val->pauseable_th.pause_xon = - PFC_E3B0_2P_BRB_MAC_PAUSE_XON_THR_PAUSE; - config_val->pauseable_th.full_xoff = - PFC_E3B0_2P_BRB_MAC_FULL_XOFF_THR_PAUSE; - config_val->pauseable_th.full_xon = - PFC_E3B0_2P_BRB_MAC_FULL_XON_THR_PAUSE; - /* non pause able*/ - config_val->non_pauseable_th.pause_xoff = - PFC_E3B0_2P_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE; - config_val->non_pauseable_th.pause_xon = - PFC_E3B0_2P_BRB_MAC_PAUSE_XON_THR_NON_PAUSE; - config_val->non_pauseable_th.full_xoff = - PFC_E3B0_2P_BRB_MAC_FULL_XOFF_THR_NON_PAUSE; - config_val->non_pauseable_th.full_xon = - PFC_E3B0_2P_BRB_MAC_FULL_XON_THR_NON_PAUSE; - } - } else - return -EINVAL; - - return 0; -} - - -static void bnx2x_pfc_brb_get_e3b0_config_params(struct link_params *params, - struct bnx2x_pfc_brb_e3b0_val - *e3b0_val, - u32 cos0_pauseable, - u32 cos1_pauseable) -{ - if (params->phy[INT_PHY].flags & FLAGS_4_PORT_MODE) { - e3b0_val->full_lb_xoff_th = - PFC_E3B0_4P_BRB_FULL_LB_XOFF_THR; - e3b0_val->full_lb_xon_threshold = - PFC_E3B0_4P_BRB_FULL_LB_XON_THR; - e3b0_val->lb_guarantied = - PFC_E3B0_4P_LB_GUART; - e3b0_val->mac_0_class_t_guarantied = - PFC_E3B0_4P_BRB_MAC_0_CLASS_T_GUART; - e3b0_val->mac_0_class_t_guarantied_hyst = - PFC_E3B0_4P_BRB_MAC_0_CLASS_T_GUART_HYST; - e3b0_val->mac_1_class_t_guarantied = - PFC_E3B0_4P_BRB_MAC_1_CLASS_T_GUART; - e3b0_val->mac_1_class_t_guarantied_hyst = - PFC_E3B0_4P_BRB_MAC_1_CLASS_T_GUART_HYST; - } else { - e3b0_val->full_lb_xoff_th = - PFC_E3B0_2P_BRB_FULL_LB_XOFF_THR; - e3b0_val->full_lb_xon_threshold = - PFC_E3B0_2P_BRB_FULL_LB_XON_THR; - e3b0_val->mac_0_class_t_guarantied_hyst = - PFC_E3B0_2P_BRB_MAC_0_CLASS_T_GUART_HYST; - e3b0_val->mac_1_class_t_guarantied = - PFC_E3B0_2P_BRB_MAC_1_CLASS_T_GUART; - e3b0_val->mac_1_class_t_guarantied_hyst = - PFC_E3B0_2P_BRB_MAC_1_CLASS_T_GUART_HYST; - - if (cos0_pauseable != cos1_pauseable) { - /* nonpauseable= Lossy + pauseable = Lossless*/ - e3b0_val->lb_guarantied = - PFC_E3B0_2P_MIX_PAUSE_LB_GUART; - e3b0_val->mac_0_class_t_guarantied = - PFC_E3B0_2P_MIX_PAUSE_MAC_0_CLASS_T_GUART; - } else if (cos0_pauseable) { - /* Lossless +Lossless*/ - e3b0_val->lb_guarantied = - PFC_E3B0_2P_PAUSE_LB_GUART; - e3b0_val->mac_0_class_t_guarantied = - PFC_E3B0_2P_PAUSE_MAC_0_CLASS_T_GUART; - } else { - /* Lossy +Lossy*/ - e3b0_val->lb_guarantied = - PFC_E3B0_2P_NON_PAUSE_LB_GUART; - e3b0_val->mac_0_class_t_guarantied = - PFC_E3B0_2P_NON_PAUSE_MAC_0_CLASS_T_GUART; - } - } -} -static int bnx2x_update_pfc_brb(struct link_params *params, - struct link_vars *vars, - struct bnx2x_nig_brb_pfc_port_params - *pfc_params) -{ - struct bnx2x *bp = params->bp; - struct bnx2x_pfc_brb_th_val config_val = { {0} }; - struct bnx2x_pfc_brb_threshold_val *reg_th_config = - &config_val.pauseable_th; - struct bnx2x_pfc_brb_e3b0_val e3b0_val = {0}; - int set_pfc = params->feature_config_flags & - FEATURE_CONFIG_PFC_ENABLED; - int bnx2x_status = 0; - u8 port = params->port; - - /* default - pause configuration */ - reg_th_config = &config_val.pauseable_th; - bnx2x_status = bnx2x_pfc_brb_get_config_params(params, &config_val); - if (0 != bnx2x_status) - return bnx2x_status; - - if (set_pfc && pfc_params) - /* First COS */ - if (!pfc_params->cos0_pauseable) - reg_th_config = &config_val.non_pauseable_th; - /* - * The number of free blocks below which the pause signal to class 0 - * of MAC #n is asserted. n=0,1 - */ - REG_WR(bp, (port) ? BRB1_REG_PAUSE_0_XOFF_THRESHOLD_1 : - BRB1_REG_PAUSE_0_XOFF_THRESHOLD_0 , - reg_th_config->pause_xoff); - /* - * The number of free blocks above which the pause signal to class 0 - * of MAC #n is de-asserted. n=0,1 - */ - REG_WR(bp, (port) ? BRB1_REG_PAUSE_0_XON_THRESHOLD_1 : - BRB1_REG_PAUSE_0_XON_THRESHOLD_0 , reg_th_config->pause_xon); - /* - * The number of free blocks below which the full signal to class 0 - * of MAC #n is asserted. n=0,1 - */ - REG_WR(bp, (port) ? BRB1_REG_FULL_0_XOFF_THRESHOLD_1 : - BRB1_REG_FULL_0_XOFF_THRESHOLD_0 , reg_th_config->full_xoff); - /* - * The number of free blocks above which the full signal to class 0 - * of MAC #n is de-asserted. n=0,1 - */ - REG_WR(bp, (port) ? BRB1_REG_FULL_0_XON_THRESHOLD_1 : - BRB1_REG_FULL_0_XON_THRESHOLD_0 , reg_th_config->full_xon); - - if (set_pfc && pfc_params) { - /* Second COS */ - if (pfc_params->cos1_pauseable) - reg_th_config = &config_val.pauseable_th; - else - reg_th_config = &config_val.non_pauseable_th; - /* - * The number of free blocks below which the pause signal to - * class 1 of MAC #n is asserted. n=0,1 - **/ - REG_WR(bp, (port) ? BRB1_REG_PAUSE_1_XOFF_THRESHOLD_1 : - BRB1_REG_PAUSE_1_XOFF_THRESHOLD_0, - reg_th_config->pause_xoff); - /* - * The number of free blocks above which the pause signal to - * class 1 of MAC #n is de-asserted. n=0,1 - */ - REG_WR(bp, (port) ? BRB1_REG_PAUSE_1_XON_THRESHOLD_1 : - BRB1_REG_PAUSE_1_XON_THRESHOLD_0, - reg_th_config->pause_xon); - /* - * The number of free blocks below which the full signal to - * class 1 of MAC #n is asserted. n=0,1 - */ - REG_WR(bp, (port) ? BRB1_REG_FULL_1_XOFF_THRESHOLD_1 : - BRB1_REG_FULL_1_XOFF_THRESHOLD_0, - reg_th_config->full_xoff); - /* - * The number of free blocks above which the full signal to - * class 1 of MAC #n is de-asserted. n=0,1 - */ - REG_WR(bp, (port) ? BRB1_REG_FULL_1_XON_THRESHOLD_1 : - BRB1_REG_FULL_1_XON_THRESHOLD_0, - reg_th_config->full_xon); - - - if (CHIP_IS_E3B0(bp)) { - /*Should be done by init tool */ - /* - * BRB_empty_for_dup = BRB1_REG_BRB_EMPTY_THRESHOLD - * reset value - * 944 - */ - - /** - * The hysteresis on the guarantied buffer space for the Lb port - * before signaling XON. - **/ - REG_WR(bp, BRB1_REG_LB_GUARANTIED_HYST, 80); - - bnx2x_pfc_brb_get_e3b0_config_params( - params, - &e3b0_val, - pfc_params->cos0_pauseable, - pfc_params->cos1_pauseable); - /** - * The number of free blocks below which the full signal to the - * LB port is asserted. - */ - REG_WR(bp, BRB1_REG_FULL_LB_XOFF_THRESHOLD, - e3b0_val.full_lb_xoff_th); - /** - * The number of free blocks above which the full signal to the - * LB port is de-asserted. - */ - REG_WR(bp, BRB1_REG_FULL_LB_XON_THRESHOLD, - e3b0_val.full_lb_xon_threshold); - /** - * The number of blocks guarantied for the MAC #n port. n=0,1 - */ - - /*The number of blocks guarantied for the LB port.*/ - REG_WR(bp, BRB1_REG_LB_GUARANTIED, - e3b0_val.lb_guarantied); - - /** - * The number of blocks guarantied for the MAC #n port. - */ - REG_WR(bp, BRB1_REG_MAC_GUARANTIED_0, - 2 * e3b0_val.mac_0_class_t_guarantied); - REG_WR(bp, BRB1_REG_MAC_GUARANTIED_1, - 2 * e3b0_val.mac_1_class_t_guarantied); - /** - * The number of blocks guarantied for class #t in MAC0. t=0,1 - */ - REG_WR(bp, BRB1_REG_MAC_0_CLASS_0_GUARANTIED, - e3b0_val.mac_0_class_t_guarantied); - REG_WR(bp, BRB1_REG_MAC_0_CLASS_1_GUARANTIED, - e3b0_val.mac_0_class_t_guarantied); - /** - * The hysteresis on the guarantied buffer space for class in - * MAC0. t=0,1 - */ - REG_WR(bp, BRB1_REG_MAC_0_CLASS_0_GUARANTIED_HYST, - e3b0_val.mac_0_class_t_guarantied_hyst); - REG_WR(bp, BRB1_REG_MAC_0_CLASS_1_GUARANTIED_HYST, - e3b0_val.mac_0_class_t_guarantied_hyst); - - /** - * The number of blocks guarantied for class #t in MAC1.t=0,1 - */ - REG_WR(bp, BRB1_REG_MAC_1_CLASS_0_GUARANTIED, - e3b0_val.mac_1_class_t_guarantied); - REG_WR(bp, BRB1_REG_MAC_1_CLASS_1_GUARANTIED, - e3b0_val.mac_1_class_t_guarantied); - /** - * The hysteresis on the guarantied buffer space for class #t - * in MAC1. t=0,1 - */ - REG_WR(bp, BRB1_REG_MAC_1_CLASS_0_GUARANTIED_HYST, - e3b0_val.mac_1_class_t_guarantied_hyst); - REG_WR(bp, BRB1_REG_MAC_1_CLASS_1_GUARANTIED_HYST, - e3b0_val.mac_1_class_t_guarantied_hyst); - - } - - } - - return bnx2x_status; -} - -/****************************************************************************** -* Description: -* This function is needed because NIG ARB_CREDIT_WEIGHT_X are -* not continues and ARB_CREDIT_WEIGHT_0 + offset is suitable. -******************************************************************************/ -int bnx2x_pfc_nig_rx_priority_mask(struct bnx2x *bp, - u8 cos_entry, - u32 priority_mask, u8 port) -{ - u32 nig_reg_rx_priority_mask_add = 0; - - switch (cos_entry) { - case 0: - nig_reg_rx_priority_mask_add = (port) ? - NIG_REG_P1_RX_COS0_PRIORITY_MASK : - NIG_REG_P0_RX_COS0_PRIORITY_MASK; - break; - case 1: - nig_reg_rx_priority_mask_add = (port) ? - NIG_REG_P1_RX_COS1_PRIORITY_MASK : - NIG_REG_P0_RX_COS1_PRIORITY_MASK; - break; - case 2: - nig_reg_rx_priority_mask_add = (port) ? - NIG_REG_P1_RX_COS2_PRIORITY_MASK : - NIG_REG_P0_RX_COS2_PRIORITY_MASK; - break; - case 3: - if (port) - return -EINVAL; - nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS3_PRIORITY_MASK; - break; - case 4: - if (port) - return -EINVAL; - nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS4_PRIORITY_MASK; - break; - case 5: - if (port) - return -EINVAL; - nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS5_PRIORITY_MASK; - break; - } - - REG_WR(bp, nig_reg_rx_priority_mask_add, priority_mask); - - return 0; -} -static void bnx2x_update_mng(struct link_params *params, u32 link_status) -{ - struct bnx2x *bp = params->bp; - - REG_WR(bp, params->shmem_base + - offsetof(struct shmem_region, - port_mb[params->port].link_status), link_status); -} - -static void bnx2x_update_pfc_nig(struct link_params *params, - struct link_vars *vars, - struct bnx2x_nig_brb_pfc_port_params *nig_params) -{ - u32 xcm_mask = 0, ppp_enable = 0, pause_enable = 0, llfc_out_en = 0; - u32 llfc_enable = 0, xcm0_out_en = 0, p0_hwpfc_enable = 0; - u32 pkt_priority_to_cos = 0; - struct bnx2x *bp = params->bp; - u8 port = params->port; - - int set_pfc = params->feature_config_flags & - FEATURE_CONFIG_PFC_ENABLED; - DP(NETIF_MSG_LINK, "updating pfc nig parameters\n"); - - /* - * When NIG_LLH0_XCM_MASK_REG_LLHX_XCM_MASK_BCN bit is set - * MAC control frames (that are not pause packets) - * will be forwarded to the XCM. - */ - xcm_mask = REG_RD(bp, - port ? NIG_REG_LLH1_XCM_MASK : - NIG_REG_LLH0_XCM_MASK); - /* - * nig params will override non PFC params, since it's possible to - * do transition from PFC to SAFC - */ - if (set_pfc) { - pause_enable = 0; - llfc_out_en = 0; - llfc_enable = 0; - if (CHIP_IS_E3(bp)) - ppp_enable = 0; - else - ppp_enable = 1; - xcm_mask &= ~(port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN : - NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN); - xcm0_out_en = 0; - p0_hwpfc_enable = 1; - } else { - if (nig_params) { - llfc_out_en = nig_params->llfc_out_en; - llfc_enable = nig_params->llfc_enable; - pause_enable = nig_params->pause_enable; - } else /*defaul non PFC mode - PAUSE */ - pause_enable = 1; - - xcm_mask |= (port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN : - NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN); - xcm0_out_en = 1; - } - - if (CHIP_IS_E3(bp)) - REG_WR(bp, port ? NIG_REG_BRB1_PAUSE_IN_EN : - NIG_REG_BRB0_PAUSE_IN_EN, pause_enable); - REG_WR(bp, port ? NIG_REG_LLFC_OUT_EN_1 : - NIG_REG_LLFC_OUT_EN_0, llfc_out_en); - REG_WR(bp, port ? NIG_REG_LLFC_ENABLE_1 : - NIG_REG_LLFC_ENABLE_0, llfc_enable); - REG_WR(bp, port ? NIG_REG_PAUSE_ENABLE_1 : - NIG_REG_PAUSE_ENABLE_0, pause_enable); - - REG_WR(bp, port ? NIG_REG_PPP_ENABLE_1 : - NIG_REG_PPP_ENABLE_0, ppp_enable); - - REG_WR(bp, port ? NIG_REG_LLH1_XCM_MASK : - NIG_REG_LLH0_XCM_MASK, xcm_mask); - - REG_WR(bp, NIG_REG_LLFC_EGRESS_SRC_ENABLE_0, 0x7); - - /* output enable for RX_XCM # IF */ - REG_WR(bp, NIG_REG_XCM0_OUT_EN, xcm0_out_en); - - /* HW PFC TX enable */ - REG_WR(bp, NIG_REG_P0_HWPFC_ENABLE, p0_hwpfc_enable); - - if (nig_params) { - u8 i = 0; - pkt_priority_to_cos = nig_params->pkt_priority_to_cos; - - for (i = 0; i < nig_params->num_of_rx_cos_priority_mask; i++) - bnx2x_pfc_nig_rx_priority_mask(bp, i, - nig_params->rx_cos_priority_mask[i], port); - - REG_WR(bp, port ? NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 : - NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0, - nig_params->llfc_high_priority_classes); - - REG_WR(bp, port ? NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1 : - NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0, - nig_params->llfc_low_priority_classes); - } - REG_WR(bp, port ? NIG_REG_P1_PKT_PRIORITY_TO_COS : - NIG_REG_P0_PKT_PRIORITY_TO_COS, - pkt_priority_to_cos); -} - -int bnx2x_update_pfc(struct link_params *params, - struct link_vars *vars, - struct bnx2x_nig_brb_pfc_port_params *pfc_params) -{ - /* - * The PFC and pause are orthogonal to one another, meaning when - * PFC is enabled, the pause are disabled, and when PFC is - * disabled, pause are set according to the pause result. - */ - u32 val; - struct bnx2x *bp = params->bp; - int bnx2x_status = 0; - u8 bmac_loopback = (params->loopback_mode == LOOPBACK_BMAC); - - if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) - vars->link_status |= LINK_STATUS_PFC_ENABLED; - else - vars->link_status &= ~LINK_STATUS_PFC_ENABLED; - - bnx2x_update_mng(params, vars->link_status); - - /* update NIG params */ - bnx2x_update_pfc_nig(params, vars, pfc_params); - - /* update BRB params */ - bnx2x_status = bnx2x_update_pfc_brb(params, vars, pfc_params); - if (0 != bnx2x_status) - return bnx2x_status; - - if (!vars->link_up) - return bnx2x_status; - - DP(NETIF_MSG_LINK, "About to update PFC in BMAC\n"); - if (CHIP_IS_E3(bp)) - bnx2x_update_pfc_xmac(params, vars, 0); - else { - val = REG_RD(bp, MISC_REG_RESET_REG_2); - if ((val & - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) - == 0) { - DP(NETIF_MSG_LINK, "About to update PFC in EMAC\n"); - bnx2x_emac_enable(params, vars, 0); - return bnx2x_status; - } - - if (CHIP_IS_E2(bp)) - bnx2x_update_pfc_bmac2(params, vars, bmac_loopback); - else - bnx2x_update_pfc_bmac1(params, vars); - - val = 0; - if ((params->feature_config_flags & - FEATURE_CONFIG_PFC_ENABLED) || - (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) - val = 1; - REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + params->port*4, val); - } - return bnx2x_status; -} - - -static int bnx2x_bmac1_enable(struct link_params *params, - struct link_vars *vars, - u8 is_lb) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : - NIG_REG_INGRESS_BMAC0_MEM; - u32 wb_data[2]; - u32 val; - - DP(NETIF_MSG_LINK, "Enabling BigMAC1\n"); - - /* XGXS control */ - wb_data[0] = 0x3c; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_XGXS_CONTROL, - wb_data, 2); - - /* tx MAC SA */ - wb_data[0] = ((params->mac_addr[2] << 24) | - (params->mac_addr[3] << 16) | - (params->mac_addr[4] << 8) | - params->mac_addr[5]); - wb_data[1] = ((params->mac_addr[0] << 8) | - params->mac_addr[1]); - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_SOURCE_ADDR, wb_data, 2); - - /* mac control */ - val = 0x3; - if (is_lb) { - val |= 0x4; - DP(NETIF_MSG_LINK, "enable bmac loopback\n"); - } - wb_data[0] = val; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, wb_data, 2); - - /* set rx mtu */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_MAX_SIZE, wb_data, 2); - - bnx2x_update_pfc_bmac1(params, vars); - - /* set tx mtu */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_MAX_SIZE, wb_data, 2); - - /* set cnt max size */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_CNT_MAX_SIZE, wb_data, 2); - - /* configure safc */ - wb_data[0] = 0x1000200; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS, - wb_data, 2); - - return 0; -} - -static int bnx2x_bmac2_enable(struct link_params *params, - struct link_vars *vars, - u8 is_lb) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : - NIG_REG_INGRESS_BMAC0_MEM; - u32 wb_data[2]; - - DP(NETIF_MSG_LINK, "Enabling BigMAC2\n"); - - wb_data[0] = 0; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_BMAC_CONTROL, wb_data, 2); - udelay(30); - - /* XGXS control: Reset phy HW, MDIO registers, PHY PLL and BMAC */ - wb_data[0] = 0x3c; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_BMAC_XGXS_CONTROL, - wb_data, 2); - - udelay(30); - - /* tx MAC SA */ - wb_data[0] = ((params->mac_addr[2] << 24) | - (params->mac_addr[3] << 16) | - (params->mac_addr[4] << 8) | - params->mac_addr[5]); - wb_data[1] = ((params->mac_addr[0] << 8) | - params->mac_addr[1]); - REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_TX_SOURCE_ADDR, - wb_data, 2); - - udelay(30); - - /* Configure SAFC */ - wb_data[0] = 0x1000200; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS, - wb_data, 2); - udelay(30); - - /* set rx mtu */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_MAX_SIZE, wb_data, 2); - udelay(30); - - /* set tx mtu */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_TX_MAX_SIZE, wb_data, 2); - udelay(30); - /* set cnt max size */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD - 2; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_CNT_MAX_SIZE, wb_data, 2); - udelay(30); - bnx2x_update_pfc_bmac2(params, vars, is_lb); - - return 0; -} - -static int bnx2x_bmac_enable(struct link_params *params, - struct link_vars *vars, - u8 is_lb) -{ - int rc = 0; - u8 port = params->port; - struct bnx2x *bp = params->bp; - u32 val; - /* reset and unreset the BigMac */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - msleep(1); - - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - - /* enable access for bmac registers */ - REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1); - - /* Enable BMAC according to BMAC type*/ - if (CHIP_IS_E2(bp)) - rc = bnx2x_bmac2_enable(params, vars, is_lb); - else - rc = bnx2x_bmac1_enable(params, vars, is_lb); - REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0x1); - REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0); - REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0); - val = 0; - if ((params->feature_config_flags & - FEATURE_CONFIG_PFC_ENABLED) || - (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) - val = 1; - REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val); - REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0); - REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x0); - REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, 0x0); - REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0x1); - REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0x1); - - vars->mac_type = MAC_TYPE_BMAC; - return rc; -} - -static void bnx2x_bmac_rx_disable(struct bnx2x *bp, u8 port) -{ - u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : - NIG_REG_INGRESS_BMAC0_MEM; - u32 wb_data[2]; - u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4); - - /* Only if the bmac is out of reset */ - if (REG_RD(bp, MISC_REG_RESET_REG_2) & - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port) && - nig_bmac_enable) { - - if (CHIP_IS_E2(bp)) { - /* Clear Rx Enable bit in BMAC_CONTROL register */ - REG_RD_DMAE(bp, bmac_addr + - BIGMAC2_REGISTER_BMAC_CONTROL, - wb_data, 2); - wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE; - REG_WR_DMAE(bp, bmac_addr + - BIGMAC2_REGISTER_BMAC_CONTROL, - wb_data, 2); - } else { - /* Clear Rx Enable bit in BMAC_CONTROL register */ - REG_RD_DMAE(bp, bmac_addr + - BIGMAC_REGISTER_BMAC_CONTROL, - wb_data, 2); - wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE; - REG_WR_DMAE(bp, bmac_addr + - BIGMAC_REGISTER_BMAC_CONTROL, - wb_data, 2); - } - msleep(1); - } -} - -static int bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, - u32 line_speed) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u32 init_crd, crd; - u32 count = 1000; - - /* disable port */ - REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1); - - /* wait for init credit */ - init_crd = REG_RD(bp, PBF_REG_P0_INIT_CRD + port*4); - crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8); - DP(NETIF_MSG_LINK, "init_crd 0x%x crd 0x%x\n", init_crd, crd); - - while ((init_crd != crd) && count) { - msleep(5); - - crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8); - count--; - } - crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8); - if (init_crd != crd) { - DP(NETIF_MSG_LINK, "BUG! init_crd 0x%x != crd 0x%x\n", - init_crd, crd); - return -EINVAL; - } - - if (flow_ctrl & BNX2X_FLOW_CTRL_RX || - line_speed == SPEED_10 || - line_speed == SPEED_100 || - line_speed == SPEED_1000 || - line_speed == SPEED_2500) { - REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 1); - /* update threshold */ - REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, 0); - /* update init credit */ - init_crd = 778; /* (800-18-4) */ - - } else { - u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE + - ETH_OVREHEAD)/16; - REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0); - /* update threshold */ - REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh); - /* update init credit */ - switch (line_speed) { - case SPEED_10000: - init_crd = thresh + 553 - 22; - break; - default: - DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", - line_speed); - return -EINVAL; - } - } - REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, init_crd); - DP(NETIF_MSG_LINK, "PBF updated to speed %d credit %d\n", - line_speed, init_crd); - - /* probe the credit changes */ - REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x1); - msleep(5); - REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x0); - - /* enable port */ - REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x0); - return 0; -} - -/** - * bnx2x_get_emac_base - retrive emac base address - * - * @bp: driver handle - * @mdc_mdio_access: access type - * @port: port id - * - * This function selects the MDC/MDIO access (through emac0 or - * emac1) depend on the mdc_mdio_access, port, port swapped. Each - * phy has a default access mode, which could also be overridden - * by nvram configuration. This parameter, whether this is the - * default phy configuration, or the nvram overrun - * configuration, is passed here as mdc_mdio_access and selects - * the emac_base for the CL45 read/writes operations - */ -static u32 bnx2x_get_emac_base(struct bnx2x *bp, - u32 mdc_mdio_access, u8 port) -{ - u32 emac_base = 0; - switch (mdc_mdio_access) { - case SHARED_HW_CFG_MDC_MDIO_ACCESS1_PHY_TYPE: - break; - case SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC0: - if (REG_RD(bp, NIG_REG_PORT_SWAP)) - emac_base = GRCBASE_EMAC1; - else - emac_base = GRCBASE_EMAC0; - break; - case SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1: - if (REG_RD(bp, NIG_REG_PORT_SWAP)) - emac_base = GRCBASE_EMAC0; - else - emac_base = GRCBASE_EMAC1; - break; - case SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH: - emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - break; - case SHARED_HW_CFG_MDC_MDIO_ACCESS1_SWAPPED: - emac_base = (port) ? GRCBASE_EMAC0 : GRCBASE_EMAC1; - break; - default: - break; - } - return emac_base; - -} - -/******************************************************************/ -/* CL22 access functions */ -/******************************************************************/ -static int bnx2x_cl22_write(struct bnx2x *bp, - struct bnx2x_phy *phy, - u16 reg, u16 val) -{ - u32 tmp, mode; - u8 i; - int rc = 0; - /* Switch to CL22 */ - mode = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, - mode & ~EMAC_MDIO_MODE_CLAUSE_45); - - /* address */ - tmp = ((phy->addr << 21) | (reg << 16) | val | - EMAC_MDIO_COMM_COMMAND_WRITE_22 | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); - - for (i = 0; i < 50; i++) { - udelay(10); - - tmp = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); - if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { - udelay(5); - break; - } - } - if (tmp & EMAC_MDIO_COMM_START_BUSY) { - DP(NETIF_MSG_LINK, "write phy register failed\n"); - rc = -EFAULT; - } - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode); - return rc; -} - -static int bnx2x_cl22_read(struct bnx2x *bp, - struct bnx2x_phy *phy, - u16 reg, u16 *ret_val) -{ - u32 val, mode; - u16 i; - int rc = 0; - - /* Switch to CL22 */ - mode = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, - mode & ~EMAC_MDIO_MODE_CLAUSE_45); - - /* address */ - val = ((phy->addr << 21) | (reg << 16) | - EMAC_MDIO_COMM_COMMAND_READ_22 | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); - - for (i = 0; i < 50; i++) { - udelay(10); - - val = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); - if (!(val & EMAC_MDIO_COMM_START_BUSY)) { - *ret_val = (u16)(val & EMAC_MDIO_COMM_DATA); - udelay(5); - break; - } - } - if (val & EMAC_MDIO_COMM_START_BUSY) { - DP(NETIF_MSG_LINK, "read phy register failed\n"); - - *ret_val = 0; - rc = -EFAULT; - } - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode); - return rc; -} - -/******************************************************************/ -/* CL45 access functions */ -/******************************************************************/ -static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy, - u8 devad, u16 reg, u16 *ret_val) -{ - u32 val; - u16 i; - int rc = 0; - if (phy->flags & FLAGS_MDC_MDIO_WA_B0) - bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, - EMAC_MDIO_STATUS_10MB); - /* address */ - val = ((phy->addr << 21) | (devad << 16) | reg | - EMAC_MDIO_COMM_COMMAND_ADDRESS | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); - - for (i = 0; i < 50; i++) { - udelay(10); - - val = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); - if (!(val & EMAC_MDIO_COMM_START_BUSY)) { - udelay(5); - break; - } - } - if (val & EMAC_MDIO_COMM_START_BUSY) { - DP(NETIF_MSG_LINK, "read phy register failed\n"); - netdev_err(bp->dev, "MDC/MDIO access timeout\n"); - *ret_val = 0; - rc = -EFAULT; - } else { - /* data */ - val = ((phy->addr << 21) | (devad << 16) | - EMAC_MDIO_COMM_COMMAND_READ_45 | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); - - for (i = 0; i < 50; i++) { - udelay(10); - - val = REG_RD(bp, phy->mdio_ctrl + - EMAC_REG_EMAC_MDIO_COMM); - if (!(val & EMAC_MDIO_COMM_START_BUSY)) { - *ret_val = (u16)(val & EMAC_MDIO_COMM_DATA); - break; - } - } - if (val & EMAC_MDIO_COMM_START_BUSY) { - DP(NETIF_MSG_LINK, "read phy register failed\n"); - netdev_err(bp->dev, "MDC/MDIO access timeout\n"); - *ret_val = 0; - rc = -EFAULT; - } - } - /* Work around for E3 A0 */ - if (phy->flags & FLAGS_MDC_MDIO_WA) { - phy->flags ^= FLAGS_DUMMY_READ; - if (phy->flags & FLAGS_DUMMY_READ) { - u16 temp_val; - bnx2x_cl45_read(bp, phy, devad, 0xf, &temp_val); - } - } - - if (phy->flags & FLAGS_MDC_MDIO_WA_B0) - bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, - EMAC_MDIO_STATUS_10MB); - return rc; -} - -static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy, - u8 devad, u16 reg, u16 val) -{ - u32 tmp; - u8 i; - int rc = 0; - if (phy->flags & FLAGS_MDC_MDIO_WA_B0) - bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, - EMAC_MDIO_STATUS_10MB); - - /* address */ - - tmp = ((phy->addr << 21) | (devad << 16) | reg | - EMAC_MDIO_COMM_COMMAND_ADDRESS | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); - - for (i = 0; i < 50; i++) { - udelay(10); - - tmp = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); - if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { - udelay(5); - break; - } - } - if (tmp & EMAC_MDIO_COMM_START_BUSY) { - DP(NETIF_MSG_LINK, "write phy register failed\n"); - netdev_err(bp->dev, "MDC/MDIO access timeout\n"); - rc = -EFAULT; - - } else { - /* data */ - tmp = ((phy->addr << 21) | (devad << 16) | val | - EMAC_MDIO_COMM_COMMAND_WRITE_45 | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); - - for (i = 0; i < 50; i++) { - udelay(10); - - tmp = REG_RD(bp, phy->mdio_ctrl + - EMAC_REG_EMAC_MDIO_COMM); - if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { - udelay(5); - break; - } - } - if (tmp & EMAC_MDIO_COMM_START_BUSY) { - DP(NETIF_MSG_LINK, "write phy register failed\n"); - netdev_err(bp->dev, "MDC/MDIO access timeout\n"); - rc = -EFAULT; - } - } - /* Work around for E3 A0 */ - if (phy->flags & FLAGS_MDC_MDIO_WA) { - phy->flags ^= FLAGS_DUMMY_READ; - if (phy->flags & FLAGS_DUMMY_READ) { - u16 temp_val; - bnx2x_cl45_read(bp, phy, devad, 0xf, &temp_val); - } - } - if (phy->flags & FLAGS_MDC_MDIO_WA_B0) - bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, - EMAC_MDIO_STATUS_10MB); - return rc; -} - - -/******************************************************************/ -/* BSC access functions from E3 */ -/******************************************************************/ -static void bnx2x_bsc_module_sel(struct link_params *params) -{ - int idx; - u32 board_cfg, sfp_ctrl; - u32 i2c_pins[I2C_SWITCH_WIDTH], i2c_val[I2C_SWITCH_WIDTH]; - struct bnx2x *bp = params->bp; - u8 port = params->port; - /* Read I2C output PINs */ - board_cfg = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.shared_hw_config.board)); - i2c_pins[I2C_BSC0] = board_cfg & SHARED_HW_CFG_E3_I2C_MUX0_MASK; - i2c_pins[I2C_BSC1] = (board_cfg & SHARED_HW_CFG_E3_I2C_MUX1_MASK) >> - SHARED_HW_CFG_E3_I2C_MUX1_SHIFT; - - /* Read I2C output value */ - sfp_ctrl = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].e3_cmn_pin_cfg)); - i2c_val[I2C_BSC0] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX0_MASK) > 0; - i2c_val[I2C_BSC1] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX1_MASK) > 0; - DP(NETIF_MSG_LINK, "Setting BSC switch\n"); - for (idx = 0; idx < I2C_SWITCH_WIDTH; idx++) - bnx2x_set_cfg_pin(bp, i2c_pins[idx], i2c_val[idx]); -} - -static int bnx2x_bsc_read(struct link_params *params, - struct bnx2x_phy *phy, - u8 sl_devid, - u16 sl_addr, - u8 lc_addr, - u8 xfer_cnt, - u32 *data_array) -{ - u32 val, i; - int rc = 0; - struct bnx2x *bp = params->bp; - - if ((sl_devid != 0xa0) && (sl_devid != 0xa2)) { - DP(NETIF_MSG_LINK, "invalid sl_devid 0x%x\n", sl_devid); - return -EINVAL; - } - - if (xfer_cnt > 16) { - DP(NETIF_MSG_LINK, "invalid xfer_cnt %d. Max is 16 bytes\n", - xfer_cnt); - return -EINVAL; - } - bnx2x_bsc_module_sel(params); - - xfer_cnt = 16 - lc_addr; - - /* enable the engine */ - val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); - val |= MCPR_IMC_COMMAND_ENABLE; - REG_WR(bp, MCP_REG_MCPR_IMC_COMMAND, val); - - /* program slave device ID */ - val = (sl_devid << 16) | sl_addr; - REG_WR(bp, MCP_REG_MCPR_IMC_SLAVE_CONTROL, val); - - /* start xfer with 0 byte to update the address pointer ???*/ - val = (MCPR_IMC_COMMAND_ENABLE) | - (MCPR_IMC_COMMAND_WRITE_OP << - MCPR_IMC_COMMAND_OPERATION_BITSHIFT) | - (lc_addr << MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT) | (0); - REG_WR(bp, MCP_REG_MCPR_IMC_COMMAND, val); - - /* poll for completion */ - i = 0; - val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); - while (((val >> MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT) & 0x3) != 1) { - udelay(10); - val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); - if (i++ > 1000) { - DP(NETIF_MSG_LINK, "wr 0 byte timed out after %d try\n", - i); - rc = -EFAULT; - break; - } - } - if (rc == -EFAULT) - return rc; - - /* start xfer with read op */ - val = (MCPR_IMC_COMMAND_ENABLE) | - (MCPR_IMC_COMMAND_READ_OP << - MCPR_IMC_COMMAND_OPERATION_BITSHIFT) | - (lc_addr << MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT) | - (xfer_cnt); - REG_WR(bp, MCP_REG_MCPR_IMC_COMMAND, val); - - /* poll for completion */ - i = 0; - val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); - while (((val >> MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT) & 0x3) != 1) { - udelay(10); - val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); - if (i++ > 1000) { - DP(NETIF_MSG_LINK, "rd op timed out after %d try\n", i); - rc = -EFAULT; - break; - } - } - if (rc == -EFAULT) - return rc; - - for (i = (lc_addr >> 2); i < 4; i++) { - data_array[i] = REG_RD(bp, (MCP_REG_MCPR_IMC_DATAREG0 + i*4)); -#ifdef __BIG_ENDIAN - data_array[i] = ((data_array[i] & 0x000000ff) << 24) | - ((data_array[i] & 0x0000ff00) << 8) | - ((data_array[i] & 0x00ff0000) >> 8) | - ((data_array[i] & 0xff000000) >> 24); -#endif - } - return rc; -} - -static void bnx2x_cl45_read_or_write(struct bnx2x *bp, struct bnx2x_phy *phy, - u8 devad, u16 reg, u16 or_val) -{ - u16 val; - bnx2x_cl45_read(bp, phy, devad, reg, &val); - bnx2x_cl45_write(bp, phy, devad, reg, val | or_val); -} - -int bnx2x_phy_read(struct link_params *params, u8 phy_addr, - u8 devad, u16 reg, u16 *ret_val) -{ - u8 phy_index; - /* - * Probe for the phy according to the given phy_addr, and execute - * the read request on it - */ - for (phy_index = 0; phy_index < params->num_phys; phy_index++) { - if (params->phy[phy_index].addr == phy_addr) { - return bnx2x_cl45_read(params->bp, - ¶ms->phy[phy_index], devad, - reg, ret_val); - } - } - return -EINVAL; -} - -int bnx2x_phy_write(struct link_params *params, u8 phy_addr, - u8 devad, u16 reg, u16 val) -{ - u8 phy_index; - /* - * Probe for the phy according to the given phy_addr, and execute - * the write request on it - */ - for (phy_index = 0; phy_index < params->num_phys; phy_index++) { - if (params->phy[phy_index].addr == phy_addr) { - return bnx2x_cl45_write(params->bp, - ¶ms->phy[phy_index], devad, - reg, val); - } - } - return -EINVAL; -} -static u8 bnx2x_get_warpcore_lane(struct bnx2x_phy *phy, - struct link_params *params) -{ - u8 lane = 0; - struct bnx2x *bp = params->bp; - u32 path_swap, path_swap_ovr; - u8 path, port; - - path = BP_PATH(bp); - port = params->port; - - if (bnx2x_is_4_port_mode(bp)) { - u32 port_swap, port_swap_ovr; - - /*figure out path swap value */ - path_swap_ovr = REG_RD(bp, MISC_REG_FOUR_PORT_PATH_SWAP_OVWR); - if (path_swap_ovr & 0x1) - path_swap = (path_swap_ovr & 0x2); - else - path_swap = REG_RD(bp, MISC_REG_FOUR_PORT_PATH_SWAP); - - if (path_swap) - path = path ^ 1; - - /*figure out port swap value */ - port_swap_ovr = REG_RD(bp, MISC_REG_FOUR_PORT_PORT_SWAP_OVWR); - if (port_swap_ovr & 0x1) - port_swap = (port_swap_ovr & 0x2); - else - port_swap = REG_RD(bp, MISC_REG_FOUR_PORT_PORT_SWAP); - - if (port_swap) - port = port ^ 1; - - lane = (port<<1) + path; - } else { /* two port mode - no port swap */ - - /*figure out path swap value */ - path_swap_ovr = - REG_RD(bp, MISC_REG_TWO_PORT_PATH_SWAP_OVWR); - if (path_swap_ovr & 0x1) { - path_swap = (path_swap_ovr & 0x2); - } else { - path_swap = - REG_RD(bp, MISC_REG_TWO_PORT_PATH_SWAP); - } - if (path_swap) - path = path ^ 1; - - lane = path << 1 ; - } - return lane; -} - -static void bnx2x_set_aer_mmd(struct link_params *params, - struct bnx2x_phy *phy) -{ - u32 ser_lane; - u16 offset, aer_val; - struct bnx2x *bp = params->bp; - ser_lane = ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - - offset = (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ? - (phy->addr + ser_lane) : 0; - - if (USES_WARPCORE(bp)) { - aer_val = bnx2x_get_warpcore_lane(phy, params); - /* - * In Dual-lane mode, two lanes are joined together, - * so in order to configure them, the AER broadcast method is - * used here. - * 0x200 is the broadcast address for lanes 0,1 - * 0x201 is the broadcast address for lanes 2,3 - */ - if (phy->flags & FLAGS_WC_DUAL_MODE) - aer_val = (aer_val >> 1) | 0x200; - } else if (CHIP_IS_E2(bp)) - aer_val = 0x3800 + offset - 1; - else - aer_val = 0x3800 + offset; - DP(NETIF_MSG_LINK, "Set AER to 0x%x\n", aer_val); - CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, - MDIO_AER_BLOCK_AER_REG, aer_val); - -} - -/******************************************************************/ -/* Internal phy section */ -/******************************************************************/ - -static void bnx2x_set_serdes_access(struct bnx2x *bp, u8 port) -{ - u32 emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - - /* Set Clause 22 */ - REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + port*0x10, 1); - REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245f8000); - udelay(500); - REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245d000f); - udelay(500); - /* Set Clause 45 */ - REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + port*0x10, 0); -} - -static void bnx2x_serdes_deassert(struct bnx2x *bp, u8 port) -{ - u32 val; - - DP(NETIF_MSG_LINK, "bnx2x_serdes_deassert\n"); - - val = SERDES_RESET_BITS << (port*16); - - /* reset and unreset the SerDes/XGXS */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val); - udelay(500); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); - - bnx2x_set_serdes_access(bp, port); - - REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_DEVAD + port*0x10, - DEFAULT_PHY_DEV_ADDR); -} - -static void bnx2x_xgxs_deassert(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 port; - u32 val; - DP(NETIF_MSG_LINK, "bnx2x_xgxs_deassert\n"); - port = params->port; - - val = XGXS_RESET_BITS << (port*16); - - /* reset and unreset the SerDes/XGXS */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val); - udelay(500); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); - - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + port*0x18, 0); - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, - params->phy[INT_PHY].def_md_devad); -} - -static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy, - struct link_params *params, u16 *ieee_fc) -{ - struct bnx2x *bp = params->bp; - *ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX; - /** - * resolve pause mode and advertisement Please refer to Table - * 28B-3 of the 802.3ab-1999 spec - */ - - switch (phy->req_flow_ctrl) { - case BNX2X_FLOW_CTRL_AUTO: - if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) - *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - else - *ieee_fc |= - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - break; - - case BNX2X_FLOW_CTRL_TX: - *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - break; - - case BNX2X_FLOW_CTRL_RX: - case BNX2X_FLOW_CTRL_BOTH: - *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - break; - - case BNX2X_FLOW_CTRL_NONE: - default: - *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; - break; - } - DP(NETIF_MSG_LINK, "ieee_fc = 0x%x\n", *ieee_fc); -} - -static void set_phy_vars(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 actual_phy_idx, phy_index, link_cfg_idx; - u8 phy_config_swapped = params->multi_phy_config & - PORT_HW_CFG_PHY_SWAPPED_ENABLED; - for (phy_index = INT_PHY; phy_index < params->num_phys; - phy_index++) { - link_cfg_idx = LINK_CONFIG_IDX(phy_index); - actual_phy_idx = phy_index; - if (phy_config_swapped) { - if (phy_index == EXT_PHY1) - actual_phy_idx = EXT_PHY2; - else if (phy_index == EXT_PHY2) - actual_phy_idx = EXT_PHY1; - } - params->phy[actual_phy_idx].req_flow_ctrl = - params->req_flow_ctrl[link_cfg_idx]; - - params->phy[actual_phy_idx].req_line_speed = - params->req_line_speed[link_cfg_idx]; - - params->phy[actual_phy_idx].speed_cap_mask = - params->speed_cap_mask[link_cfg_idx]; - - params->phy[actual_phy_idx].req_duplex = - params->req_duplex[link_cfg_idx]; - - if (params->req_line_speed[link_cfg_idx] == - SPEED_AUTO_NEG) - vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED; - - DP(NETIF_MSG_LINK, "req_flow_ctrl %x, req_line_speed %x," - " speed_cap_mask %x\n", - params->phy[actual_phy_idx].req_flow_ctrl, - params->phy[actual_phy_idx].req_line_speed, - params->phy[actual_phy_idx].speed_cap_mask); - } -} - -static void bnx2x_ext_phy_set_pause(struct link_params *params, - struct bnx2x_phy *phy, - struct link_vars *vars) -{ - u16 val; - struct bnx2x *bp = params->bp; - /* read modify write pause advertizing */ - bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, &val); - - val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH; - - /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ - bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) { - val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC; - } - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { - val |= MDIO_AN_REG_ADV_PAUSE_PAUSE; - } - DP(NETIF_MSG_LINK, "Ext phy AN advertize 0x%x\n", val); - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val); -} - -static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result) -{ /* LD LP */ - switch (pause_result) { /* ASYM P ASYM P */ - case 0xb: /* 1 0 1 1 */ - vars->flow_ctrl = BNX2X_FLOW_CTRL_TX; - break; - - case 0xe: /* 1 1 1 0 */ - vars->flow_ctrl = BNX2X_FLOW_CTRL_RX; - break; - - case 0x5: /* 0 1 0 1 */ - case 0x7: /* 0 1 1 1 */ - case 0xd: /* 1 1 0 1 */ - case 0xf: /* 1 1 1 1 */ - vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH; - break; - - default: - break; - } - if (pause_result & (1<<0)) - vars->link_status |= LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE; - if (pause_result & (1<<1)) - vars->link_status |= LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE; -} - -static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 ld_pause; /* local */ - u16 lp_pause; /* link partner */ - u16 pause_result; - u8 ret = 0; - /* read twice */ - - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - - if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) - vars->flow_ctrl = phy->req_flow_ctrl; - else if (phy->req_line_speed != SPEED_AUTO_NEG) - vars->flow_ctrl = params->req_fc_auto_adv; - else if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) { - ret = 1; - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) { - bnx2x_cl22_read(bp, phy, - 0x4, &ld_pause); - bnx2x_cl22_read(bp, phy, - 0x5, &lp_pause); - } else { - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_ADV_PAUSE, &ld_pause); - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_LP_AUTO_NEG, &lp_pause); - } - pause_result = (ld_pause & - MDIO_AN_REG_ADV_PAUSE_MASK) >> 8; - pause_result |= (lp_pause & - MDIO_AN_REG_ADV_PAUSE_MASK) >> 10; - DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n", - pause_result); - bnx2x_pause_resolve(vars, pause_result); - } - return ret; -} -/******************************************************************/ -/* Warpcore section */ -/******************************************************************/ -/* The init_internal_warpcore should mirror the xgxs, - * i.e. reset the lane (if needed), set aer for the - * init configuration, and set/clear SGMII flag. Internal - * phy init is done purely in phy_init stage. - */ -static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) { - u16 val16 = 0, lane, bam37 = 0; - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n"); - /* Check adding advertisement for 1G KX */ - if (((vars->line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || - (vars->line_speed == SPEED_1000)) { - u16 sd_digital; - val16 |= (1<<5); - - /* Enable CL37 1G Parallel Detect */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, &sd_digital); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, - (sd_digital | 0x1)); - - DP(NETIF_MSG_LINK, "Advertize 1G\n"); - } - if (((vars->line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || - (vars->line_speed == SPEED_10000)) { - /* Check adding advertisement for 10G KR */ - val16 |= (1<<7); - /* Enable 10G Parallel Detect */ - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, - MDIO_WC_REG_PAR_DET_10G_CTRL, 1); - - DP(NETIF_MSG_LINK, "Advertize 10G\n"); - } - - /* Set Transmit PMD settings */ - lane = bnx2x_get_warpcore_lane(phy, params); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, - ((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | - (0x06 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | - (0x09 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET))); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL, - 0x03f0); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL, - 0x03f0); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, - 0x383f); - - /* Advertised speeds */ - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, - MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16); - - /* Enable CL37 BAM */ - if (REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, dev_info. - port_hw_config[params->port].default_cfg)) & - PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) { - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL, &bam37); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL, bam37 | 1); - DP(NETIF_MSG_LINK, "Enable CL37 BAM on KR\n"); - } - - /* Advertise pause */ - bnx2x_ext_phy_set_pause(params, phy, vars); - - /* Enable Autoneg */ - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, - MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1000); - - /* Over 1G - AN local device user page 1 */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL3_UP1, 0x1f); - - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL5_MISC7, &val16); - - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL5_MISC7, val16 | 0x100); -} - -static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 val; - - /* Disable Autoneg */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7); - - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, - MDIO_WC_REG_PAR_DET_10G_CTRL, 0); - - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0x3f00); - - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, - MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0); - - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, - MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0); - - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL3_UP1, 0x1); - - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL5_MISC7, 0xa); - - /* Disable CL36 PCS Tx */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0x0); - - /* Double Wide Single Data Rate @ pll rate */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0xFFFF); - - /* Leave cl72 training enable, needed for KR */ - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, - MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150, - 0x2); - - /* Leave CL72 enabled */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, - &val); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, - val | 0x3800); - - /* Set speed via PMA/PMD register */ - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, - MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040); - - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, - MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0xB); - - /*Enable encoded forced speed */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x30); - - /* Turn TX scramble payload only the 64/66 scrambler */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_TX66_CONTROL, 0x9); - - /* Turn RX scramble payload only the 64/66 scrambler */ - bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX66_CONTROL, 0xF9); - - /* set and clear loopback to cause a reset to 64/66 decoder */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x4000); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0); - -} - -static void bnx2x_warpcore_set_10G_XFI(struct bnx2x_phy *phy, - struct link_params *params, - u8 is_xfi) -{ - struct bnx2x *bp = params->bp; - u16 misc1_val, tap_val, tx_driver_val, lane, val; - /* Hold rxSeqStart */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, &val); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, (val | 0x8000)); - - /* Hold tx_fifo_reset */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, &val); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, (val | 0x1)); - - /* Disable CL73 AN */ - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0); - - /* Disable 100FX Enable and Auto-Detect */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_FX100_CTRL1, &val); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_FX100_CTRL1, (val & 0xFFFA)); - - /* Disable 100FX Idle detect */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_FX100_CTRL3, &val); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_FX100_CTRL3, (val | 0x0080)); - - /* Set Block address to Remote PHY & Clear forced_speed[5] */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL4_MISC3, &val); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL4_MISC3, (val & 0xFF7F)); - - /* Turn off auto-detect & fiber mode */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, &val); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, - (val & 0xFFEE)); - - /* Set filter_force_link, disable_false_link and parallel_detect */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, &val); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, - ((val | 0x0006) & 0xFFFE)); - - /* Set XFI / SFI */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_MISC1, &misc1_val); - - misc1_val &= ~(0x1f); - - if (is_xfi) { - misc1_val |= 0x5; - tap_val = ((0x08 << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | - (0x37 << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | - (0x00 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET)); - tx_driver_val = - ((0x00 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | - (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | - (0x03 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)); - - } else { - misc1_val |= 0x9; - tap_val = ((0x12 << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | - (0x2d << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | - (0x00 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET)); - tx_driver_val = - ((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | - (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | - (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)); - } - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_MISC1, misc1_val); - - /* Set Transmit PMD settings */ - lane = bnx2x_get_warpcore_lane(phy, params); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_TX_FIR_TAP, - tap_val | MDIO_WC_REG_TX_FIR_TAP_ENABLE); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, - tx_driver_val); - - /* Enable fiber mode, enable and invert sig_det */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, &val); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, val | 0xd); - - /* Set Block address to Remote PHY & Set forced_speed[5], 40bit mode */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL4_MISC3, &val); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL4_MISC3, val | 0x8080); - - /* 10G XFI Full Duplex */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x100); - - /* Release tx_fifo_reset */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, &val); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, val & 0xFFFE); - - /* Release rxSeqStart */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, &val); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, (val & 0x7FFF)); -} - -static void bnx2x_warpcore_set_20G_KR2(struct bnx2x *bp, - struct bnx2x_phy *phy) -{ - DP(NETIF_MSG_LINK, "KR2 still not supported !!!\n"); -} - -static void bnx2x_warpcore_set_20G_DXGXS(struct bnx2x *bp, - struct bnx2x_phy *phy, - u16 lane) -{ - /* Rx0 anaRxControl1G */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX0_ANARXCONTROL1G, 0x90); - - /* Rx2 anaRxControl1G */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX2_ANARXCONTROL1G, 0x90); - - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX66_SCW0, 0xE070); - - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX66_SCW1, 0xC0D0); - - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX66_SCW2, 0xA0B0); - - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX66_SCW3, 0x8090); - - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX66_SCW0_MASK, 0xF0F0); - - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX66_SCW1_MASK, 0xF0F0); - - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX66_SCW2_MASK, 0xF0F0); - - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX66_SCW3_MASK, 0xF0F0); - - /* Serdes Digital Misc1 */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x6008); - - /* Serdes Digital4 Misc3 */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL4_MISC3, 0x8088); - - /* Set Transmit PMD settings */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_TX_FIR_TAP, - ((0x12 << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | - (0x2d << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | - (0x00 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET) | - MDIO_WC_REG_TX_FIR_TAP_ENABLE)); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, - ((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | - (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | - (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET))); -} - -static void bnx2x_warpcore_set_sgmii_speed(struct bnx2x_phy *phy, - struct link_params *params, - u8 fiber_mode) -{ - struct bnx2x *bp = params->bp; - u16 val16, digctrl_kx1, digctrl_kx2; - u8 lane; - - lane = bnx2x_get_warpcore_lane(phy, params); - - /* Clear XFI clock comp in non-10G single lane mode. */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX66_CONTROL, &val16); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX66_CONTROL, val16 & ~(3<<13)); - - if (phy->req_line_speed == SPEED_AUTO_NEG) { - /* SGMII Autoneg */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_COMBO_IEEE0_MIICTRL, - val16 | 0x1000); - DP(NETIF_MSG_LINK, "set SGMII AUTONEG\n"); - } else { - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); - val16 &= 0xcfbf; - switch (phy->req_line_speed) { - case SPEED_10: - break; - case SPEED_100: - val16 |= 0x2000; - break; - case SPEED_1000: - val16 |= 0x0040; - break; - default: - DP(NETIF_MSG_LINK, "Speed not supported: 0x%x" - "\n", phy->req_line_speed); - return; - } - - if (phy->req_duplex == DUPLEX_FULL) - val16 |= 0x0100; - - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16); - - DP(NETIF_MSG_LINK, "set SGMII force speed %d\n", - phy->req_line_speed); - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); - DP(NETIF_MSG_LINK, " (readback) %x\n", val16); - } - - /* SGMII Slave mode and disable signal detect */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, &digctrl_kx1); - if (fiber_mode) - digctrl_kx1 = 1; - else - digctrl_kx1 &= 0xff4a; - - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, - digctrl_kx1); - - /* Turn off parallel detect */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, &digctrl_kx2); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, - (digctrl_kx2 & ~(1<<2))); - - /* Re-enable parallel detect */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, - (digctrl_kx2 | (1<<2))); - - /* Enable autodet */ - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, - (digctrl_kx1 | 0x10)); -} - -static void bnx2x_warpcore_reset_lane(struct bnx2x *bp, - struct bnx2x_phy *phy, - u8 reset) -{ - u16 val; - /* Take lane out of reset after configuration is finished */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL5_MISC6, &val); - if (reset) - val |= 0xC000; - else - val &= 0x3FFF; - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL5_MISC6, val); - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL5_MISC6, &val); -} - - - /* Clear SFI/XFI link settings registers */ -static void bnx2x_warpcore_clear_regs(struct bnx2x_phy *phy, - struct link_params *params, - u16 lane) -{ - struct bnx2x *bp = params->bp; - u16 val16; - - /* Set XFI clock comp as default. */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX66_CONTROL, &val16); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RX66_CONTROL, val16 | (3<<13)); - - bnx2x_warpcore_reset_lane(bp, phy, 1); - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_FX100_CTRL1, 0x014a); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_FX100_CTRL3, 0x0800); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_DIGITAL4_MISC3, 0x8008); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0x0195); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x0007); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, 0x0002); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x6000); - lane = bnx2x_get_warpcore_lane(phy, params); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_TX_FIR_TAP, 0x0000); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, 0x0990); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_COMBO_IEEE0_MIICTRL, 0x0140); - bnx2x_warpcore_reset_lane(bp, phy, 0); -} - -static int bnx2x_get_mod_abs_int_cfg(struct bnx2x *bp, - u32 chip_id, - u32 shmem_base, u8 port, - u8 *gpio_num, u8 *gpio_port) -{ - u32 cfg_pin; - *gpio_num = 0; - *gpio_port = 0; - if (CHIP_IS_E3(bp)) { - cfg_pin = (REG_RD(bp, shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].e3_sfp_ctrl)) & - PORT_HW_CFG_E3_MOD_ABS_MASK) >> - PORT_HW_CFG_E3_MOD_ABS_SHIFT; - - /* - * Should not happen. This function called upon interrupt - * triggered by GPIO ( since EPIO can only generate interrupts - * to MCP). - * So if this function was called and none of the GPIOs was set, - * it means the shit hit the fan. - */ - if ((cfg_pin < PIN_CFG_GPIO0_P0) || - (cfg_pin > PIN_CFG_GPIO3_P1)) { - DP(NETIF_MSG_LINK, "ERROR: Invalid cfg pin %x for " - "module detect indication\n", - cfg_pin); - return -EINVAL; - } - - *gpio_num = (cfg_pin - PIN_CFG_GPIO0_P0) & 0x3; - *gpio_port = (cfg_pin - PIN_CFG_GPIO0_P0) >> 2; - } else { - *gpio_num = MISC_REGISTERS_GPIO_3; - *gpio_port = port; - } - DP(NETIF_MSG_LINK, "MOD_ABS int GPIO%d_P%d\n", *gpio_num, *gpio_port); - return 0; -} - -static int bnx2x_is_sfp_module_plugged(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 gpio_num, gpio_port; - u32 gpio_val; - if (bnx2x_get_mod_abs_int_cfg(bp, params->chip_id, - params->shmem_base, params->port, - &gpio_num, &gpio_port) != 0) - return 0; - gpio_val = bnx2x_get_gpio(bp, gpio_num, gpio_port); - - /* Call the handling function in case module is detected */ - if (gpio_val == 0) - return 1; - else - return 0; -} - -static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u32 serdes_net_if; - u8 fiber_mode; - u16 lane = bnx2x_get_warpcore_lane(phy, params); - serdes_net_if = (REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, dev_info. - port_hw_config[params->port].default_cfg)) & - PORT_HW_CFG_NET_SERDES_IF_MASK); - DP(NETIF_MSG_LINK, "Begin Warpcore init, link_speed %d, " - "serdes_net_if = 0x%x\n", - vars->line_speed, serdes_net_if); - bnx2x_set_aer_mmd(params, phy); - - vars->phy_flags |= PHY_XGXS_FLAG; - if ((serdes_net_if == PORT_HW_CFG_NET_SERDES_IF_SGMII) || - (phy->req_line_speed && - ((phy->req_line_speed == SPEED_100) || - (phy->req_line_speed == SPEED_10)))) { - vars->phy_flags |= PHY_SGMII_FLAG; - DP(NETIF_MSG_LINK, "Setting SGMII mode\n"); - bnx2x_warpcore_clear_regs(phy, params, lane); - bnx2x_warpcore_set_sgmii_speed(phy, params, 0); - } else { - switch (serdes_net_if) { - case PORT_HW_CFG_NET_SERDES_IF_KR: - /* Enable KR Auto Neg */ - if (params->loopback_mode == LOOPBACK_NONE) - bnx2x_warpcore_enable_AN_KR(phy, params, vars); - else { - DP(NETIF_MSG_LINK, "Setting KR 10G-Force\n"); - bnx2x_warpcore_set_10G_KR(phy, params, vars); - } - break; - - case PORT_HW_CFG_NET_SERDES_IF_XFI: - bnx2x_warpcore_clear_regs(phy, params, lane); - if (vars->line_speed == SPEED_10000) { - DP(NETIF_MSG_LINK, "Setting 10G XFI\n"); - bnx2x_warpcore_set_10G_XFI(phy, params, 1); - } else { - if (SINGLE_MEDIA_DIRECT(params)) { - DP(NETIF_MSG_LINK, "1G Fiber\n"); - fiber_mode = 1; - } else { - DP(NETIF_MSG_LINK, "10/100/1G SGMII\n"); - fiber_mode = 0; - } - bnx2x_warpcore_set_sgmii_speed(phy, - params, - fiber_mode); - } - - break; - - case PORT_HW_CFG_NET_SERDES_IF_SFI: - - bnx2x_warpcore_clear_regs(phy, params, lane); - if (vars->line_speed == SPEED_10000) { - DP(NETIF_MSG_LINK, "Setting 10G SFI\n"); - bnx2x_warpcore_set_10G_XFI(phy, params, 0); - } else if (vars->line_speed == SPEED_1000) { - DP(NETIF_MSG_LINK, "Setting 1G Fiber\n"); - bnx2x_warpcore_set_sgmii_speed(phy, params, 1); - } - /* Issue Module detection */ - if (bnx2x_is_sfp_module_plugged(phy, params)) - bnx2x_sfp_module_detection(phy, params); - break; - - case PORT_HW_CFG_NET_SERDES_IF_DXGXS: - if (vars->line_speed != SPEED_20000) { - DP(NETIF_MSG_LINK, "Speed not supported yet\n"); - return; - } - DP(NETIF_MSG_LINK, "Setting 20G DXGXS\n"); - bnx2x_warpcore_set_20G_DXGXS(bp, phy, lane); - /* Issue Module detection */ - - bnx2x_sfp_module_detection(phy, params); - break; - - case PORT_HW_CFG_NET_SERDES_IF_KR2: - if (vars->line_speed != SPEED_20000) { - DP(NETIF_MSG_LINK, "Speed not supported yet\n"); - return; - } - DP(NETIF_MSG_LINK, "Setting 20G KR2\n"); - bnx2x_warpcore_set_20G_KR2(bp, phy); - break; - - default: - DP(NETIF_MSG_LINK, "Unsupported Serdes Net Interface " - "0x%x\n", serdes_net_if); - return; - } - } - - /* Take lane out of reset after configuration is finished */ - bnx2x_warpcore_reset_lane(bp, phy, 0); - DP(NETIF_MSG_LINK, "Exit config init\n"); -} - -static void bnx2x_sfp_e3_set_transmitter(struct link_params *params, - struct bnx2x_phy *phy, - u8 tx_en) -{ - struct bnx2x *bp = params->bp; - u32 cfg_pin; - u8 port = params->port; - - cfg_pin = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].e3_sfp_ctrl)) & - PORT_HW_CFG_TX_LASER_MASK; - /* Set the !tx_en since this pin is DISABLE_TX_LASER */ - DP(NETIF_MSG_LINK, "Setting WC TX to %d\n", tx_en); - /* For 20G, the expected pin to be used is 3 pins after the current */ - - bnx2x_set_cfg_pin(bp, cfg_pin, tx_en ^ 1); - if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G) - bnx2x_set_cfg_pin(bp, cfg_pin + 3, tx_en ^ 1); -} - -static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 val16; - bnx2x_sfp_e3_set_transmitter(params, phy, 0); - bnx2x_set_mdio_clk(bp, params->chip_id, params->port); - bnx2x_set_aer_mmd(params, phy); - /* Global register */ - bnx2x_warpcore_reset_lane(bp, phy, 1); - - /* Clear loopback settings (if any) */ - /* 10G & 20G */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16 & - 0xBFFF); - - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_IEEE0BLK_MIICNTL, &val16); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_IEEE0BLK_MIICNTL, val16 & 0xfffe); - - /* Update those 1-copy registers */ - CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, - MDIO_AER_BLOCK_AER_REG, 0); - /* Enable 1G MDIO (1-copy) */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, - &val16); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, - val16 & ~0x10); - - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_XGXSBLK1_LANECTRL2, &val16); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_XGXSBLK1_LANECTRL2, - val16 & 0xff00); - -} - -static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 val16; - u32 lane; - DP(NETIF_MSG_LINK, "Setting Warpcore loopback type %x, speed %d\n", - params->loopback_mode, phy->req_line_speed); - - if (phy->req_line_speed < SPEED_10000) { - /* 10/100/1000 */ - - /* Update those 1-copy registers */ - CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, - MDIO_AER_BLOCK_AER_REG, 0); - /* Enable 1G MDIO (1-copy) */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, - &val16); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, - val16 | 0x10); - /* Set 1G loopback based on lane (1-copy) */ - lane = bnx2x_get_warpcore_lane(phy, params); - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_XGXSBLK1_LANECTRL2, &val16); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_XGXSBLK1_LANECTRL2, - val16 | (1<<lane)); - - /* Switch back to 4-copy registers */ - bnx2x_set_aer_mmd(params, phy); - /* Global loopback, not recommended. */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16 | - 0x4000); - } else { - /* 10G & 20G */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16 | - 0x4000); - - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_IEEE0BLK_MIICNTL, &val16); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_IEEE0BLK_MIICNTL, val16 | 0x1); - } -} - - -void bnx2x_link_status_update(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 link_10g_plus; - u8 port = params->port; - u32 sync_offset, media_types; - /* Update PHY configuration */ - set_phy_vars(params, vars); - - vars->link_status = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - port_mb[port].link_status)); - - vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP); - vars->phy_flags = PHY_XGXS_FLAG; - if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG) - vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG; - - if (vars->link_up) { - DP(NETIF_MSG_LINK, "phy link up\n"); - - vars->phy_link_up = 1; - vars->duplex = DUPLEX_FULL; - switch (vars->link_status & - LINK_STATUS_SPEED_AND_DUPLEX_MASK) { - case LINK_10THD: - vars->duplex = DUPLEX_HALF; - /* fall thru */ - case LINK_10TFD: - vars->line_speed = SPEED_10; - break; - - case LINK_100TXHD: - vars->duplex = DUPLEX_HALF; - /* fall thru */ - case LINK_100T4: - case LINK_100TXFD: - vars->line_speed = SPEED_100; - break; - - case LINK_1000THD: - vars->duplex = DUPLEX_HALF; - /* fall thru */ - case LINK_1000TFD: - vars->line_speed = SPEED_1000; - break; - - case LINK_2500THD: - vars->duplex = DUPLEX_HALF; - /* fall thru */ - case LINK_2500TFD: - vars->line_speed = SPEED_2500; - break; - - case LINK_10GTFD: - vars->line_speed = SPEED_10000; - break; - case LINK_20GTFD: - vars->line_speed = SPEED_20000; - break; - default: - break; - } - vars->flow_ctrl = 0; - if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED) - vars->flow_ctrl |= BNX2X_FLOW_CTRL_TX; - - if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED) - vars->flow_ctrl |= BNX2X_FLOW_CTRL_RX; - - if (!vars->flow_ctrl) - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - - if (vars->line_speed && - ((vars->line_speed == SPEED_10) || - (vars->line_speed == SPEED_100))) { - vars->phy_flags |= PHY_SGMII_FLAG; - } else { - vars->phy_flags &= ~PHY_SGMII_FLAG; - } - if (vars->line_speed && - USES_WARPCORE(bp) && - (vars->line_speed == SPEED_1000)) - vars->phy_flags |= PHY_SGMII_FLAG; - /* anything 10 and over uses the bmac */ - link_10g_plus = (vars->line_speed >= SPEED_10000); - - if (link_10g_plus) { - if (USES_WARPCORE(bp)) - vars->mac_type = MAC_TYPE_XMAC; - else - vars->mac_type = MAC_TYPE_BMAC; - } else { - if (USES_WARPCORE(bp)) - vars->mac_type = MAC_TYPE_UMAC; - else - vars->mac_type = MAC_TYPE_EMAC; - } - } else { /* link down */ - DP(NETIF_MSG_LINK, "phy link down\n"); - - vars->phy_link_up = 0; - - vars->line_speed = 0; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - - /* indicate no mac active */ - vars->mac_type = MAC_TYPE_NONE; - if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG) - vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; - } - - /* Sync media type */ - sync_offset = params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].media_type); - media_types = REG_RD(bp, sync_offset); - - params->phy[INT_PHY].media_type = - (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) >> - PORT_HW_CFG_MEDIA_TYPE_PHY0_SHIFT; - params->phy[EXT_PHY1].media_type = - (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY1_MASK) >> - PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT; - params->phy[EXT_PHY2].media_type = - (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY2_MASK) >> - PORT_HW_CFG_MEDIA_TYPE_PHY2_SHIFT; - DP(NETIF_MSG_LINK, "media_types = 0x%x\n", media_types); - - /* Sync AEU offset */ - sync_offset = params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].aeu_int_mask); - - vars->aeu_int_mask = REG_RD(bp, sync_offset); - - /* Sync PFC status */ - if (vars->link_status & LINK_STATUS_PFC_ENABLED) - params->feature_config_flags |= - FEATURE_CONFIG_PFC_ENABLED; - else - params->feature_config_flags &= - ~FEATURE_CONFIG_PFC_ENABLED; - - DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x int_mask 0x%x\n", - vars->link_status, vars->phy_link_up, vars->aeu_int_mask); - DP(NETIF_MSG_LINK, "line_speed %x duplex %x flow_ctrl 0x%x\n", - vars->line_speed, vars->duplex, vars->flow_ctrl); -} - - -static void bnx2x_set_master_ln(struct link_params *params, - struct bnx2x_phy *phy) -{ - struct bnx2x *bp = params->bp; - u16 new_master_ln, ser_lane; - ser_lane = ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - - /* set the master_ln for AN */ - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_XGXS_BLOCK2, - MDIO_XGXS_BLOCK2_TEST_MODE_LANE, - &new_master_ln); - - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_XGXS_BLOCK2 , - MDIO_XGXS_BLOCK2_TEST_MODE_LANE, - (new_master_ln | ser_lane)); -} - -static int bnx2x_reset_unicore(struct link_params *params, - struct bnx2x_phy *phy, - u8 set_serdes) -{ - struct bnx2x *bp = params->bp; - u16 mii_control; - u16 i; - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control); - - /* reset the unicore */ - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, - (mii_control | - MDIO_COMBO_IEEO_MII_CONTROL_RESET)); - if (set_serdes) - bnx2x_set_serdes_access(bp, params->port); - - /* wait for the reset to self clear */ - for (i = 0; i < MDIO_ACCESS_TIMEOUT; i++) { - udelay(5); - - /* the reset erased the previous bank value */ - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, - &mii_control); - - if (!(mii_control & MDIO_COMBO_IEEO_MII_CONTROL_RESET)) { - udelay(5); - return 0; - } - } - - netdev_err(bp->dev, "Warning: PHY was not initialized," - " Port %d\n", - params->port); - DP(NETIF_MSG_LINK, "BUG! XGXS is still in reset!\n"); - return -EINVAL; - -} - -static void bnx2x_set_swap_lanes(struct link_params *params, - struct bnx2x_phy *phy) -{ - struct bnx2x *bp = params->bp; - /* - * Each two bits represents a lane number: - * No swap is 0123 => 0x1b no need to enable the swap - */ - u16 ser_lane, rx_lane_swap, tx_lane_swap; - - ser_lane = ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - rx_lane_swap = ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_RX_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_RX_SHIFT); - tx_lane_swap = ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_TX_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_TX_SHIFT); - - if (rx_lane_swap != 0x1b) { - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_XGXS_BLOCK2, - MDIO_XGXS_BLOCK2_RX_LN_SWAP, - (rx_lane_swap | - MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE | - MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE)); - } else { - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_XGXS_BLOCK2, - MDIO_XGXS_BLOCK2_RX_LN_SWAP, 0); - } - - if (tx_lane_swap != 0x1b) { - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_XGXS_BLOCK2, - MDIO_XGXS_BLOCK2_TX_LN_SWAP, - (tx_lane_swap | - MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE)); - } else { - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_XGXS_BLOCK2, - MDIO_XGXS_BLOCK2_TX_LN_SWAP, 0); - } -} - -static void bnx2x_set_parallel_detection(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 control2; - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, - &control2); - if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) - control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN; - else - control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN; - DP(NETIF_MSG_LINK, "phy->speed_cap_mask = 0x%x, control2 = 0x%x\n", - phy->speed_cap_mask, control2); - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, - control2); - - if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && - (phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) { - DP(NETIF_MSG_LINK, "XGXS\n"); - - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_10G_PARALLEL_DETECT, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT); - - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_10G_PARALLEL_DETECT, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, - &control2); - - - control2 |= - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN; - - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_10G_PARALLEL_DETECT, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, - control2); - - /* Disable parallel detection of HiG */ - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_XGXS_BLOCK2, - MDIO_XGXS_BLOCK2_UNICORE_MODE_10G, - MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS | - MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS); - } -} - -static void bnx2x_set_autoneg(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars, - u8 enable_cl73) -{ - struct bnx2x *bp = params->bp; - u16 reg_val; - - /* CL37 Autoneg */ - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, ®_val); - - /* CL37 Autoneg Enabled */ - if (vars->line_speed == SPEED_AUTO_NEG) - reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN; - else /* CL37 Autoneg Disabled */ - reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | - MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN); - - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, reg_val); - - /* Enable/Disable Autodetection */ - - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, ®_val); - reg_val &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN | - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT); - reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE; - if (vars->line_speed == SPEED_AUTO_NEG) - reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET; - else - reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET; - - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, reg_val); - - /* Enable TetonII and BAM autoneg */ - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_BAM_NEXT_PAGE, - MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, - ®_val); - if (vars->line_speed == SPEED_AUTO_NEG) { - /* Enable BAM aneg Mode and TetonII aneg Mode */ - reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE | - MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN); - } else { - /* TetonII and BAM Autoneg Disabled */ - reg_val &= ~(MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE | - MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN); - } - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_BAM_NEXT_PAGE, - MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, - reg_val); - - if (enable_cl73) { - /* Enable Cl73 FSM status bits */ - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_CL73_USERB0, - MDIO_CL73_USERB0_CL73_UCTRL, - 0xe); - - /* Enable BAM Station Manager*/ - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_CL73_USERB0, - MDIO_CL73_USERB0_CL73_BAM_CTRL1, - MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN | - MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN | - MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN); - - /* Advertise CL73 link speeds */ - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_CL73_IEEEB1, - MDIO_CL73_IEEEB1_AN_ADV2, - ®_val); - if (phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) - reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4; - if (phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) - reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX; - - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_CL73_IEEEB1, - MDIO_CL73_IEEEB1_AN_ADV2, - reg_val); - - /* CL73 Autoneg Enabled */ - reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN; - - } else /* CL73 Autoneg Disabled */ - reg_val = 0; - - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_CL73_IEEEB0, - MDIO_CL73_IEEEB0_CL73_AN_CONTROL, reg_val); -} - -/* program SerDes, forced speed */ -static void bnx2x_program_serdes(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 reg_val; - - /* program duplex, disable autoneg and sgmii*/ - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, ®_val); - reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX | - MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | - MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK); - if (phy->req_duplex == DUPLEX_FULL) - reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX; - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, reg_val); - - /* - * program speed - * - needed only if the speed is greater than 1G (2.5G or 10G) - */ - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_MISC1, ®_val); - /* clearing the speed value before setting the right speed */ - DP(NETIF_MSG_LINK, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x\n", reg_val); - - reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK | - MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL); - - if (!((vars->line_speed == SPEED_1000) || - (vars->line_speed == SPEED_100) || - (vars->line_speed == SPEED_10))) { - - reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M | - MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL); - if (vars->line_speed == SPEED_10000) - reg_val |= - MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4; - } - - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_MISC1, reg_val); - -} - -static void bnx2x_set_brcm_cl37_advertisement(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 val = 0; - - /* configure the 48 bits for BAM AN */ - - /* set extended capabilities */ - if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) - val |= MDIO_OVER_1G_UP1_2_5G; - if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) - val |= MDIO_OVER_1G_UP1_10G; - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_OVER_1G, - MDIO_OVER_1G_UP1, val); - - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_OVER_1G, - MDIO_OVER_1G_UP3, 0x400); -} - -static void bnx2x_set_ieee_aneg_advertisement(struct bnx2x_phy *phy, - struct link_params *params, - u16 ieee_fc) -{ - struct bnx2x *bp = params->bp; - u16 val; - /* for AN, we are always publishing full duplex */ - - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_AUTO_NEG_ADV, ieee_fc); - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_CL73_IEEEB1, - MDIO_CL73_IEEEB1_AN_ADV1, &val); - val &= ~MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH; - val |= ((ieee_fc<<3) & MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK); - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_CL73_IEEEB1, - MDIO_CL73_IEEEB1_AN_ADV1, val); -} - -static void bnx2x_restart_autoneg(struct bnx2x_phy *phy, - struct link_params *params, - u8 enable_cl73) -{ - struct bnx2x *bp = params->bp; - u16 mii_control; - - DP(NETIF_MSG_LINK, "bnx2x_restart_autoneg\n"); - /* Enable and restart BAM/CL37 aneg */ - - if (enable_cl73) { - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_CL73_IEEEB0, - MDIO_CL73_IEEEB0_CL73_AN_CONTROL, - &mii_control); - - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_CL73_IEEEB0, - MDIO_CL73_IEEEB0_CL73_AN_CONTROL, - (mii_control | - MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN | - MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN)); - } else { - - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, - &mii_control); - DP(NETIF_MSG_LINK, - "bnx2x_restart_autoneg mii_control before = 0x%x\n", - mii_control); - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, - (mii_control | - MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | - MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN)); - } -} - -static void bnx2x_initialize_sgmii_process(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 control1; - - /* in SGMII mode, the unicore is always slave */ - - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, - &control1); - control1 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT; - /* set sgmii mode (and not fiber) */ - control1 &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE | - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET | - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE); - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, - control1); - - /* if forced speed */ - if (!(vars->line_speed == SPEED_AUTO_NEG)) { - /* set speed, disable autoneg */ - u16 mii_control; - - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, - &mii_control); - mii_control &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | - MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK| - MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX); - - switch (vars->line_speed) { - case SPEED_100: - mii_control |= - MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100; - break; - case SPEED_1000: - mii_control |= - MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000; - break; - case SPEED_10: - /* there is nothing to set for 10M */ - break; - default: - /* invalid speed for SGMII */ - DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", - vars->line_speed); - break; - } - - /* setting the full duplex */ - if (phy->req_duplex == DUPLEX_FULL) - mii_control |= - MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX; - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, - mii_control); - - } else { /* AN mode */ - /* enable and restart AN */ - bnx2x_restart_autoneg(phy, params, 0); - } -} - - -/* - * link management - */ - -static int bnx2x_direct_parallel_detect_used(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 pd_10g, status2_1000x; - if (phy->req_line_speed != SPEED_AUTO_NEG) - return 0; - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_STATUS2, - &status2_1000x); - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_STATUS2, - &status2_1000x); - if (status2_1000x & MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED) { - DP(NETIF_MSG_LINK, "1G parallel detect link on port %d\n", - params->port); - return 1; - } - - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_10G_PARALLEL_DETECT, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS, - &pd_10g); - - if (pd_10g & MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK) { - DP(NETIF_MSG_LINK, "10G parallel detect link on port %d\n", - params->port); - return 1; - } - return 0; -} - -static void bnx2x_flow_ctrl_resolve(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars, - u32 gp_status) -{ - struct bnx2x *bp = params->bp; - u16 ld_pause; /* local driver */ - u16 lp_pause; /* link partner */ - u16 pause_result; - - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - - /* resolve from gp_status in case of AN complete and not sgmii */ - if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) - vars->flow_ctrl = phy->req_flow_ctrl; - else if (phy->req_line_speed != SPEED_AUTO_NEG) - vars->flow_ctrl = params->req_fc_auto_adv; - else if ((gp_status & MDIO_AN_CL73_OR_37_COMPLETE) && - (!(vars->phy_flags & PHY_SGMII_FLAG))) { - if (bnx2x_direct_parallel_detect_used(phy, params)) { - vars->flow_ctrl = params->req_fc_auto_adv; - return; - } - if ((gp_status & - (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | - MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) == - (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | - MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) { - - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_CL73_IEEEB1, - MDIO_CL73_IEEEB1_AN_ADV1, - &ld_pause); - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_CL73_IEEEB1, - MDIO_CL73_IEEEB1_AN_LP_ADV1, - &lp_pause); - pause_result = (ld_pause & - MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK) - >> 8; - pause_result |= (lp_pause & - MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK) - >> 10; - DP(NETIF_MSG_LINK, "pause_result CL73 0x%x\n", - pause_result); - } else { - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_AUTO_NEG_ADV, - &ld_pause); - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1, - &lp_pause); - pause_result = (ld_pause & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>5; - pause_result |= (lp_pause & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7; - DP(NETIF_MSG_LINK, "pause_result CL37 0x%x\n", - pause_result); - } - bnx2x_pause_resolve(vars, pause_result); - } - DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", vars->flow_ctrl); -} - -static void bnx2x_check_fallback_to_cl37(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 rx_status, ustat_val, cl37_fsm_received; - DP(NETIF_MSG_LINK, "bnx2x_check_fallback_to_cl37\n"); - /* Step 1: Make sure signal is detected */ - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_RX0, - MDIO_RX0_RX_STATUS, - &rx_status); - if ((rx_status & MDIO_RX0_RX_STATUS_SIGDET) != - (MDIO_RX0_RX_STATUS_SIGDET)) { - DP(NETIF_MSG_LINK, "Signal is not detected. Restoring CL73." - "rx_status(0x80b0) = 0x%x\n", rx_status); - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_CL73_IEEEB0, - MDIO_CL73_IEEEB0_CL73_AN_CONTROL, - MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN); - return; - } - /* Step 2: Check CL73 state machine */ - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_CL73_USERB0, - MDIO_CL73_USERB0_CL73_USTAT1, - &ustat_val); - if ((ustat_val & - (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK | - MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) != - (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK | - MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) { - DP(NETIF_MSG_LINK, "CL73 state-machine is not stable. " - "ustat_val(0x8371) = 0x%x\n", ustat_val); - return; - } - /* - * Step 3: Check CL37 Message Pages received to indicate LP - * supports only CL37 - */ - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_REMOTE_PHY, - MDIO_REMOTE_PHY_MISC_RX_STATUS, - &cl37_fsm_received); - if ((cl37_fsm_received & - (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG | - MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) != - (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG | - MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) { - DP(NETIF_MSG_LINK, "No CL37 FSM were received. " - "misc_rx_status(0x8330) = 0x%x\n", - cl37_fsm_received); - return; - } - /* - * The combined cl37/cl73 fsm state information indicating that - * we are connected to a device which does not support cl73, but - * does support cl37 BAM. In this case we disable cl73 and - * restart cl37 auto-neg - */ - - /* Disable CL73 */ - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_CL73_IEEEB0, - MDIO_CL73_IEEEB0_CL73_AN_CONTROL, - 0); - /* Restart CL37 autoneg */ - bnx2x_restart_autoneg(phy, params, 0); - DP(NETIF_MSG_LINK, "Disabling CL73, and restarting CL37 autoneg\n"); -} - -static void bnx2x_xgxs_an_resolve(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars, - u32 gp_status) -{ - if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) - vars->link_status |= - LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; - - if (bnx2x_direct_parallel_detect_used(phy, params)) - vars->link_status |= - LINK_STATUS_PARALLEL_DETECTION_USED; -} -static int bnx2x_get_link_speed_duplex(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars, - u16 is_link_up, - u16 speed_mask, - u16 is_duplex) -{ - struct bnx2x *bp = params->bp; - if (phy->req_line_speed == SPEED_AUTO_NEG) - vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED; - if (is_link_up) { - DP(NETIF_MSG_LINK, "phy link up\n"); - - vars->phy_link_up = 1; - vars->link_status |= LINK_STATUS_LINK_UP; - - switch (speed_mask) { - case GP_STATUS_10M: - vars->line_speed = SPEED_10; - if (vars->duplex == DUPLEX_FULL) - vars->link_status |= LINK_10TFD; - else - vars->link_status |= LINK_10THD; - break; - - case GP_STATUS_100M: - vars->line_speed = SPEED_100; - if (vars->duplex == DUPLEX_FULL) - vars->link_status |= LINK_100TXFD; - else - vars->link_status |= LINK_100TXHD; - break; - - case GP_STATUS_1G: - case GP_STATUS_1G_KX: - vars->line_speed = SPEED_1000; - if (vars->duplex == DUPLEX_FULL) - vars->link_status |= LINK_1000TFD; - else - vars->link_status |= LINK_1000THD; - break; - - case GP_STATUS_2_5G: - vars->line_speed = SPEED_2500; - if (vars->duplex == DUPLEX_FULL) - vars->link_status |= LINK_2500TFD; - else - vars->link_status |= LINK_2500THD; - break; - - case GP_STATUS_5G: - case GP_STATUS_6G: - DP(NETIF_MSG_LINK, - "link speed unsupported gp_status 0x%x\n", - speed_mask); - return -EINVAL; - - case GP_STATUS_10G_KX4: - case GP_STATUS_10G_HIG: - case GP_STATUS_10G_CX4: - case GP_STATUS_10G_KR: - case GP_STATUS_10G_SFI: - case GP_STATUS_10G_XFI: - vars->line_speed = SPEED_10000; - vars->link_status |= LINK_10GTFD; - break; - case GP_STATUS_20G_DXGXS: - vars->line_speed = SPEED_20000; - vars->link_status |= LINK_20GTFD; - break; - default: - DP(NETIF_MSG_LINK, - "link speed unsupported gp_status 0x%x\n", - speed_mask); - return -EINVAL; - } - } else { /* link_down */ - DP(NETIF_MSG_LINK, "phy link down\n"); - - vars->phy_link_up = 0; - - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->mac_type = MAC_TYPE_NONE; - } - DP(NETIF_MSG_LINK, " phy_link_up %x line_speed %d\n", - vars->phy_link_up, vars->line_speed); - return 0; -} - -static int bnx2x_link_settings_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - - struct bnx2x *bp = params->bp; - - u16 gp_status, duplex = DUPLEX_HALF, link_up = 0, speed_mask; - int rc = 0; - - /* Read gp_status */ - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_GP_STATUS, - MDIO_GP_STATUS_TOP_AN_STATUS1, - &gp_status); - if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS) - duplex = DUPLEX_FULL; - if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) - link_up = 1; - speed_mask = gp_status & GP_STATUS_SPEED_MASK; - DP(NETIF_MSG_LINK, "gp_status 0x%x, is_link_up %d, speed_mask 0x%x\n", - gp_status, link_up, speed_mask); - rc = bnx2x_get_link_speed_duplex(phy, params, vars, link_up, speed_mask, - duplex); - if (rc == -EINVAL) - return rc; - - if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) { - if (SINGLE_MEDIA_DIRECT(params)) { - bnx2x_flow_ctrl_resolve(phy, params, vars, gp_status); - if (phy->req_line_speed == SPEED_AUTO_NEG) - bnx2x_xgxs_an_resolve(phy, params, vars, - gp_status); - } - } else { /* link_down */ - if ((phy->req_line_speed == SPEED_AUTO_NEG) && - SINGLE_MEDIA_DIRECT(params)) { - /* Check signal is detected */ - bnx2x_check_fallback_to_cl37(phy, params); - } - } - - DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x link_status 0x%x\n", - vars->duplex, vars->flow_ctrl, vars->link_status); - return rc; -} - -static int bnx2x_warpcore_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - - struct bnx2x *bp = params->bp; - - u8 lane; - u16 gp_status1, gp_speed, link_up, duplex = DUPLEX_FULL; - int rc = 0; - lane = bnx2x_get_warpcore_lane(phy, params); - /* Read gp_status */ - if (phy->req_line_speed > SPEED_10000) { - u16 temp_link_up; - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - 1, &temp_link_up); - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - 1, &link_up); - DP(NETIF_MSG_LINK, "PCS RX link status = 0x%x-->0x%x\n", - temp_link_up, link_up); - link_up &= (1<<2); - if (link_up) - bnx2x_ext_phy_resolve_fc(phy, params, vars); - } else { - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_GP2_STATUS_GP_2_1, &gp_status1); - DP(NETIF_MSG_LINK, "0x81d1 = 0x%x\n", gp_status1); - /* Check for either KR or generic link up. */ - gp_status1 = ((gp_status1 >> 8) & 0xf) | - ((gp_status1 >> 12) & 0xf); - link_up = gp_status1 & (1 << lane); - if (link_up && SINGLE_MEDIA_DIRECT(params)) { - u16 pd, gp_status4; - if (phy->req_line_speed == SPEED_AUTO_NEG) { - /* Check Autoneg complete */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_GP2_STATUS_GP_2_4, - &gp_status4); - if (gp_status4 & ((1<<12)<<lane)) - vars->link_status |= - LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; - - /* Check parallel detect used */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_PAR_DET_10G_STATUS, - &pd); - if (pd & (1<<15)) - vars->link_status |= - LINK_STATUS_PARALLEL_DETECTION_USED; - } - bnx2x_ext_phy_resolve_fc(phy, params, vars); - } - } - - if (lane < 2) { - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_GP2_STATUS_GP_2_2, &gp_speed); - } else { - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_GP2_STATUS_GP_2_3, &gp_speed); - } - DP(NETIF_MSG_LINK, "lane %d gp_speed 0x%x\n", lane, gp_speed); - - if ((lane & 1) == 0) - gp_speed <<= 8; - gp_speed &= 0x3f00; - - - rc = bnx2x_get_link_speed_duplex(phy, params, vars, link_up, gp_speed, - duplex); - - DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x link_status 0x%x\n", - vars->duplex, vars->flow_ctrl, vars->link_status); - return rc; -} -static void bnx2x_set_gmii_tx_driver(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - struct bnx2x_phy *phy = ¶ms->phy[INT_PHY]; - u16 lp_up2; - u16 tx_driver; - u16 bank; - - /* read precomp */ - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_OVER_1G, - MDIO_OVER_1G_LP_UP2, &lp_up2); - - /* bits [10:7] at lp_up2, positioned at [15:12] */ - lp_up2 = (((lp_up2 & MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK) >> - MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT) << - MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT); - - if (lp_up2 == 0) - return; - - for (bank = MDIO_REG_BANK_TX0; bank <= MDIO_REG_BANK_TX3; - bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0)) { - CL22_RD_OVER_CL45(bp, phy, - bank, - MDIO_TX0_TX_DRIVER, &tx_driver); - - /* replace tx_driver bits [15:12] */ - if (lp_up2 != - (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK)) { - tx_driver &= ~MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK; - tx_driver |= lp_up2; - CL22_WR_OVER_CL45(bp, phy, - bank, - MDIO_TX0_TX_DRIVER, tx_driver); - } - } -} - -static int bnx2x_emac_program(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u16 mode = 0; - - DP(NETIF_MSG_LINK, "setting link speed & duplex\n"); - bnx2x_bits_dis(bp, GRCBASE_EMAC0 + port*0x400 + - EMAC_REG_EMAC_MODE, - (EMAC_MODE_25G_MODE | - EMAC_MODE_PORT_MII_10M | - EMAC_MODE_HALF_DUPLEX)); - switch (vars->line_speed) { - case SPEED_10: - mode |= EMAC_MODE_PORT_MII_10M; - break; - - case SPEED_100: - mode |= EMAC_MODE_PORT_MII; - break; - - case SPEED_1000: - mode |= EMAC_MODE_PORT_GMII; - break; - - case SPEED_2500: - mode |= (EMAC_MODE_25G_MODE | EMAC_MODE_PORT_GMII); - break; - - default: - /* 10G not valid for EMAC */ - DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", - vars->line_speed); - return -EINVAL; - } - - if (vars->duplex == DUPLEX_HALF) - mode |= EMAC_MODE_HALF_DUPLEX; - bnx2x_bits_en(bp, - GRCBASE_EMAC0 + port*0x400 + EMAC_REG_EMAC_MODE, - mode); - - bnx2x_set_led(params, vars, LED_MODE_OPER, vars->line_speed); - return 0; -} - -static void bnx2x_set_preemphasis(struct bnx2x_phy *phy, - struct link_params *params) -{ - - u16 bank, i = 0; - struct bnx2x *bp = params->bp; - - for (bank = MDIO_REG_BANK_RX0, i = 0; bank <= MDIO_REG_BANK_RX3; - bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0), i++) { - CL22_WR_OVER_CL45(bp, phy, - bank, - MDIO_RX0_RX_EQ_BOOST, - phy->rx_preemphasis[i]); - } - - for (bank = MDIO_REG_BANK_TX0, i = 0; bank <= MDIO_REG_BANK_TX3; - bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0), i++) { - CL22_WR_OVER_CL45(bp, phy, - bank, - MDIO_TX0_TX_DRIVER, - phy->tx_preemphasis[i]); - } -} - -static void bnx2x_xgxs_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 enable_cl73 = (SINGLE_MEDIA_DIRECT(params) || - (params->loopback_mode == LOOPBACK_XGXS)); - if (!(vars->phy_flags & PHY_SGMII_FLAG)) { - if (SINGLE_MEDIA_DIRECT(params) && - (params->feature_config_flags & - FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) - bnx2x_set_preemphasis(phy, params); - - /* forced speed requested? */ - if (vars->line_speed != SPEED_AUTO_NEG || - (SINGLE_MEDIA_DIRECT(params) && - params->loopback_mode == LOOPBACK_EXT)) { - DP(NETIF_MSG_LINK, "not SGMII, no AN\n"); - - /* disable autoneg */ - bnx2x_set_autoneg(phy, params, vars, 0); - - /* program speed and duplex */ - bnx2x_program_serdes(phy, params, vars); - - } else { /* AN_mode */ - DP(NETIF_MSG_LINK, "not SGMII, AN\n"); - - /* AN enabled */ - bnx2x_set_brcm_cl37_advertisement(phy, params); - - /* program duplex & pause advertisement (for aneg) */ - bnx2x_set_ieee_aneg_advertisement(phy, params, - vars->ieee_fc); - - /* enable autoneg */ - bnx2x_set_autoneg(phy, params, vars, enable_cl73); - - /* enable and restart AN */ - bnx2x_restart_autoneg(phy, params, enable_cl73); - } - - } else { /* SGMII mode */ - DP(NETIF_MSG_LINK, "SGMII\n"); - - bnx2x_initialize_sgmii_process(phy, params, vars); - } -} - -static int bnx2x_prepare_xgxs(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - int rc; - vars->phy_flags |= PHY_XGXS_FLAG; - if ((phy->req_line_speed && - ((phy->req_line_speed == SPEED_100) || - (phy->req_line_speed == SPEED_10))) || - (!phy->req_line_speed && - (phy->speed_cap_mask >= - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) && - (phy->speed_cap_mask < - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || - (phy->type == PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT_SD)) - vars->phy_flags |= PHY_SGMII_FLAG; - else - vars->phy_flags &= ~PHY_SGMII_FLAG; - - bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); - bnx2x_set_aer_mmd(params, phy); - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) - bnx2x_set_master_ln(params, phy); - - rc = bnx2x_reset_unicore(params, phy, 0); - /* reset the SerDes and wait for reset bit return low */ - if (rc != 0) - return rc; - - bnx2x_set_aer_mmd(params, phy); - /* setting the masterLn_def again after the reset */ - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) { - bnx2x_set_master_ln(params, phy); - bnx2x_set_swap_lanes(params, phy); - } - - return rc; -} - -static u16 bnx2x_wait_reset_complete(struct bnx2x *bp, - struct bnx2x_phy *phy, - struct link_params *params) -{ - u16 cnt, ctrl; - /* Wait for soft reset to get cleared up to 1 sec */ - for (cnt = 0; cnt < 1000; cnt++) { - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) - bnx2x_cl22_read(bp, phy, - MDIO_PMA_REG_CTRL, &ctrl); - else - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, &ctrl); - if (!(ctrl & (1<<15))) - break; - msleep(1); - } - - if (cnt == 1000) - netdev_err(bp->dev, "Warning: PHY was not initialized," - " Port %d\n", - params->port); - DP(NETIF_MSG_LINK, "control reg 0x%x (after %d ms)\n", ctrl, cnt); - return cnt; -} - -static void bnx2x_link_int_enable(struct link_params *params) -{ - u8 port = params->port; - u32 mask; - struct bnx2x *bp = params->bp; - - /* Setting the status to report on link up for either XGXS or SerDes */ - if (CHIP_IS_E3(bp)) { - mask = NIG_MASK_XGXS0_LINK_STATUS; - if (!(SINGLE_MEDIA_DIRECT(params))) - mask |= NIG_MASK_MI_INT; - } else if (params->switch_cfg == SWITCH_CFG_10G) { - mask = (NIG_MASK_XGXS0_LINK10G | - NIG_MASK_XGXS0_LINK_STATUS); - DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n"); - if (!(SINGLE_MEDIA_DIRECT(params)) && - params->phy[INT_PHY].type != - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) { - mask |= NIG_MASK_MI_INT; - DP(NETIF_MSG_LINK, "enabled external phy int\n"); - } - - } else { /* SerDes */ - mask = NIG_MASK_SERDES0_LINK_STATUS; - DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n"); - if (!(SINGLE_MEDIA_DIRECT(params)) && - params->phy[INT_PHY].type != - PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN) { - mask |= NIG_MASK_MI_INT; - DP(NETIF_MSG_LINK, "enabled external phy int\n"); - } - } - bnx2x_bits_en(bp, - NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - mask); - - DP(NETIF_MSG_LINK, "port %x, is_xgxs %x, int_status 0x%x\n", port, - (params->switch_cfg == SWITCH_CFG_10G), - REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); - DP(NETIF_MSG_LINK, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x\n", - REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), - REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), - REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS+port*0x3c)); - DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n", - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); -} - -static void bnx2x_rearm_latch_signal(struct bnx2x *bp, u8 port, - u8 exp_mi_int) -{ - u32 latch_status = 0; - - /* - * Disable the MI INT ( external phy int ) by writing 1 to the - * status register. Link down indication is high-active-signal, - * so in this case we need to write the status to clear the XOR - */ - /* Read Latched signals */ - latch_status = REG_RD(bp, - NIG_REG_LATCH_STATUS_0 + port*8); - DP(NETIF_MSG_LINK, "latch_status = 0x%x\n", latch_status); - /* Handle only those with latched-signal=up.*/ - if (exp_mi_int) - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 - + port*4, - NIG_STATUS_EMAC0_MI_INT); - else - bnx2x_bits_dis(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 - + port*4, - NIG_STATUS_EMAC0_MI_INT); - - if (latch_status & 1) { - - /* For all latched-signal=up : Re-Arm Latch signals */ - REG_WR(bp, NIG_REG_LATCH_STATUS_0 + port*8, - (latch_status & 0xfffe) | (latch_status & 1)); - } - /* For all latched-signal=up,Write original_signal to status */ -} - -static void bnx2x_link_int_ack(struct link_params *params, - struct link_vars *vars, u8 is_10g_plus) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u32 mask; - /* - * First reset all status we assume only one line will be - * change at a time - */ - bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - (NIG_STATUS_XGXS0_LINK10G | - NIG_STATUS_XGXS0_LINK_STATUS | - NIG_STATUS_SERDES0_LINK_STATUS)); - if (vars->phy_link_up) { - if (USES_WARPCORE(bp)) - mask = NIG_STATUS_XGXS0_LINK_STATUS; - else { - if (is_10g_plus) - mask = NIG_STATUS_XGXS0_LINK10G; - else if (params->switch_cfg == SWITCH_CFG_10G) { - /* - * Disable the link interrupt by writing 1 to - * the relevant lane in the status register - */ - u32 ser_lane = - ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - mask = ((1 << ser_lane) << - NIG_STATUS_XGXS0_LINK_STATUS_SIZE); - } else - mask = NIG_STATUS_SERDES0_LINK_STATUS; - } - DP(NETIF_MSG_LINK, "Ack link up interrupt with mask 0x%x\n", - mask); - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - mask); - } -} - -static int bnx2x_format_ver(u32 num, u8 *str, u16 *len) -{ - u8 *str_ptr = str; - u32 mask = 0xf0000000; - u8 shift = 8*4; - u8 digit; - u8 remove_leading_zeros = 1; - if (*len < 10) { - /* Need more than 10chars for this format */ - *str_ptr = '\0'; - (*len)--; - return -EINVAL; - } - while (shift > 0) { - - shift -= 4; - digit = ((num & mask) >> shift); - if (digit == 0 && remove_leading_zeros) { - mask = mask >> 4; - continue; - } else if (digit < 0xa) - *str_ptr = digit + '0'; - else - *str_ptr = digit - 0xa + 'a'; - remove_leading_zeros = 0; - str_ptr++; - (*len)--; - mask = mask >> 4; - if (shift == 4*4) { - *str_ptr = '.'; - str_ptr++; - (*len)--; - remove_leading_zeros = 1; - } - } - return 0; -} - - -static int bnx2x_null_format_ver(u32 spirom_ver, u8 *str, u16 *len) -{ - str[0] = '\0'; - (*len)--; - return 0; -} - -int bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, - u8 *version, u16 len) -{ - struct bnx2x *bp; - u32 spirom_ver = 0; - int status = 0; - u8 *ver_p = version; - u16 remain_len = len; - if (version == NULL || params == NULL) - return -EINVAL; - bp = params->bp; - - /* Extract first external phy*/ - version[0] = '\0'; - spirom_ver = REG_RD(bp, params->phy[EXT_PHY1].ver_addr); - - if (params->phy[EXT_PHY1].format_fw_ver) { - status |= params->phy[EXT_PHY1].format_fw_ver(spirom_ver, - ver_p, - &remain_len); - ver_p += (len - remain_len); - } - if ((params->num_phys == MAX_PHYS) && - (params->phy[EXT_PHY2].ver_addr != 0)) { - spirom_ver = REG_RD(bp, params->phy[EXT_PHY2].ver_addr); - if (params->phy[EXT_PHY2].format_fw_ver) { - *ver_p = '/'; - ver_p++; - remain_len--; - status |= params->phy[EXT_PHY2].format_fw_ver( - spirom_ver, - ver_p, - &remain_len); - ver_p = version + (len - remain_len); - } - } - *ver_p = '\0'; - return status; -} - -static void bnx2x_set_xgxs_loopback(struct bnx2x_phy *phy, - struct link_params *params) -{ - u8 port = params->port; - struct bnx2x *bp = params->bp; - - if (phy->req_line_speed != SPEED_1000) { - u32 md_devad = 0; - - DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n"); - - if (!CHIP_IS_E3(bp)) { - /* change the uni_phy_addr in the nig */ - md_devad = REG_RD(bp, (NIG_REG_XGXS0_CTRL_MD_DEVAD + - port*0x18)); - - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, - 0x5); - } - - bnx2x_cl45_write(bp, phy, - 5, - (MDIO_REG_BANK_AER_BLOCK + - (MDIO_AER_BLOCK_AER_REG & 0xf)), - 0x2800); - - bnx2x_cl45_write(bp, phy, - 5, - (MDIO_REG_BANK_CL73_IEEEB0 + - (MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)), - 0x6041); - msleep(200); - /* set aer mmd back */ - bnx2x_set_aer_mmd(params, phy); - - if (!CHIP_IS_E3(bp)) { - /* and md_devad */ - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, - md_devad); - } - } else { - u16 mii_ctrl; - DP(NETIF_MSG_LINK, "XGXS 1G loopback enable\n"); - bnx2x_cl45_read(bp, phy, 5, - (MDIO_REG_BANK_COMBO_IEEE0 + - (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)), - &mii_ctrl); - bnx2x_cl45_write(bp, phy, 5, - (MDIO_REG_BANK_COMBO_IEEE0 + - (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)), - mii_ctrl | - MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK); - } -} - -int bnx2x_set_led(struct link_params *params, - struct link_vars *vars, u8 mode, u32 speed) -{ - u8 port = params->port; - u16 hw_led_mode = params->hw_led_mode; - int rc = 0; - u8 phy_idx; - u32 tmp; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode); - DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n", - speed, hw_led_mode); - /* In case */ - for (phy_idx = EXT_PHY1; phy_idx < MAX_PHYS; phy_idx++) { - if (params->phy[phy_idx].set_link_led) { - params->phy[phy_idx].set_link_led( - ¶ms->phy[phy_idx], params, mode); - } - } - - switch (mode) { - case LED_MODE_FRONT_PANEL_OFF: - case LED_MODE_OFF: - REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 0); - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, - SHARED_HW_CFG_LED_MAC1); - - tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); - EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE)); - break; - - case LED_MODE_OPER: - /* - * For all other phys, OPER mode is same as ON, so in case - * link is down, do nothing - */ - if (!vars->link_up) - break; - case LED_MODE_ON: - if (((params->phy[EXT_PHY1].type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) || - (params->phy[EXT_PHY1].type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722)) && - CHIP_IS_E2(bp) && params->num_phys == 2) { - /* - * This is a work-around for E2+8727 Configurations - */ - if (mode == LED_MODE_ON || - speed == SPEED_10000){ - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); - REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); - - tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); - EMAC_WR(bp, EMAC_REG_EMAC_LED, - (tmp | EMAC_LED_OVERRIDE)); - /* - * return here without enabling traffic - * LED blink andsetting rate in ON mode. - * In oper mode, enabling LED blink - * and setting rate is needed. - */ - if (mode == LED_MODE_ON) - return rc; - } - } else if (SINGLE_MEDIA_DIRECT(params)) { - /* - * This is a work-around for HW issue found when link - * is up in CL73 - */ - REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); - if (CHIP_IS_E1x(bp) || - CHIP_IS_E2(bp) || - (mode == LED_MODE_ON)) - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); - else - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, - hw_led_mode); - } else - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode); - - REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0); - /* Set blinking rate to ~15.9Hz */ - REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4, - LED_BLINK_RATE_VAL); - REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 + - port*4, 1); - tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); - EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp & (~EMAC_LED_OVERRIDE))); - - if (CHIP_IS_E1(bp) && - ((speed == SPEED_2500) || - (speed == SPEED_1000) || - (speed == SPEED_100) || - (speed == SPEED_10))) { - /* - * On Everest 1 Ax chip versions for speeds less than - * 10G LED scheme is different - */ - REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 - + port*4, 1); - REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 + - port*4, 0); - REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 + - port*4, 1); - } - break; - - default: - rc = -EINVAL; - DP(NETIF_MSG_LINK, "bnx2x_set_led: Invalid led mode %d\n", - mode); - break; - } - return rc; - -} - -/* - * This function comes to reflect the actual link state read DIRECTLY from the - * HW - */ -int bnx2x_test_link(struct link_params *params, struct link_vars *vars, - u8 is_serdes) -{ - struct bnx2x *bp = params->bp; - u16 gp_status = 0, phy_index = 0; - u8 ext_phy_link_up = 0, serdes_phy_type; - struct link_vars temp_vars; - struct bnx2x_phy *int_phy = ¶ms->phy[INT_PHY]; - - if (CHIP_IS_E3(bp)) { - u16 link_up; - if (params->req_line_speed[LINK_CONFIG_IDX(INT_PHY)] - > SPEED_10000) { - /* Check 20G link */ - bnx2x_cl45_read(bp, int_phy, MDIO_WC_DEVAD, - 1, &link_up); - bnx2x_cl45_read(bp, int_phy, MDIO_WC_DEVAD, - 1, &link_up); - link_up &= (1<<2); - } else { - /* Check 10G link and below*/ - u8 lane = bnx2x_get_warpcore_lane(int_phy, params); - bnx2x_cl45_read(bp, int_phy, MDIO_WC_DEVAD, - MDIO_WC_REG_GP2_STATUS_GP_2_1, - &gp_status); - gp_status = ((gp_status >> 8) & 0xf) | - ((gp_status >> 12) & 0xf); - link_up = gp_status & (1 << lane); - } - if (!link_up) - return -ESRCH; - } else { - CL22_RD_OVER_CL45(bp, int_phy, - MDIO_REG_BANK_GP_STATUS, - MDIO_GP_STATUS_TOP_AN_STATUS1, - &gp_status); - /* link is up only if both local phy and external phy are up */ - if (!(gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS)) - return -ESRCH; - } - /* In XGXS loopback mode, do not check external PHY */ - if (params->loopback_mode == LOOPBACK_XGXS) - return 0; - - switch (params->num_phys) { - case 1: - /* No external PHY */ - return 0; - case 2: - ext_phy_link_up = params->phy[EXT_PHY1].read_status( - ¶ms->phy[EXT_PHY1], - params, &temp_vars); - break; - case 3: /* Dual Media */ - for (phy_index = EXT_PHY1; phy_index < params->num_phys; - phy_index++) { - serdes_phy_type = ((params->phy[phy_index].media_type == - ETH_PHY_SFP_FIBER) || - (params->phy[phy_index].media_type == - ETH_PHY_XFP_FIBER) || - (params->phy[phy_index].media_type == - ETH_PHY_DA_TWINAX)); - - if (is_serdes != serdes_phy_type) - continue; - if (params->phy[phy_index].read_status) { - ext_phy_link_up |= - params->phy[phy_index].read_status( - ¶ms->phy[phy_index], - params, &temp_vars); - } - } - break; - } - if (ext_phy_link_up) - return 0; - return -ESRCH; -} - -static int bnx2x_link_initialize(struct link_params *params, - struct link_vars *vars) -{ - int rc = 0; - u8 phy_index, non_ext_phy; - struct bnx2x *bp = params->bp; - /* - * In case of external phy existence, the line speed would be the - * line speed linked up by the external phy. In case it is direct - * only, then the line_speed during initialization will be - * equal to the req_line_speed - */ - vars->line_speed = params->phy[INT_PHY].req_line_speed; - - /* - * Initialize the internal phy in case this is a direct board - * (no external phys), or this board has external phy which requires - * to first. - */ - if (!USES_WARPCORE(bp)) - bnx2x_prepare_xgxs(¶ms->phy[INT_PHY], params, vars); - /* init ext phy and enable link state int */ - non_ext_phy = (SINGLE_MEDIA_DIRECT(params) || - (params->loopback_mode == LOOPBACK_XGXS)); - - if (non_ext_phy || - (params->phy[EXT_PHY1].flags & FLAGS_INIT_XGXS_FIRST) || - (params->loopback_mode == LOOPBACK_EXT_PHY)) { - struct bnx2x_phy *phy = ¶ms->phy[INT_PHY]; - if (vars->line_speed == SPEED_AUTO_NEG && - (CHIP_IS_E1x(bp) || - CHIP_IS_E2(bp))) - bnx2x_set_parallel_detection(phy, params); - if (params->phy[INT_PHY].config_init) - params->phy[INT_PHY].config_init(phy, - params, - vars); - } - - /* Init external phy*/ - if (non_ext_phy) { - if (params->phy[INT_PHY].supported & - SUPPORTED_FIBRE) - vars->link_status |= LINK_STATUS_SERDES_LINK; - } else { - for (phy_index = EXT_PHY1; phy_index < params->num_phys; - phy_index++) { - /* - * No need to initialize second phy in case of first - * phy only selection. In case of second phy, we do - * need to initialize the first phy, since they are - * connected. - */ - if (params->phy[phy_index].supported & - SUPPORTED_FIBRE) - vars->link_status |= LINK_STATUS_SERDES_LINK; - - if (phy_index == EXT_PHY2 && - (bnx2x_phy_selection(params) == - PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) { - DP(NETIF_MSG_LINK, "Not initializing" - " second phy\n"); - continue; - } - params->phy[phy_index].config_init( - ¶ms->phy[phy_index], - params, vars); - } - } - /* Reset the interrupt indication after phy was initialized */ - bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + - params->port*4, - (NIG_STATUS_XGXS0_LINK10G | - NIG_STATUS_XGXS0_LINK_STATUS | - NIG_STATUS_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - bnx2x_update_mng(params, vars->link_status); - return rc; -} - -static void bnx2x_int_link_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - /* reset the SerDes/XGXS */ - REG_WR(params->bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, - (0x1ff << (params->port*16))); -} - -static void bnx2x_common_ext_link_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 gpio_port; - /* HW reset */ - if (CHIP_IS_E2(bp)) - gpio_port = BP_PATH(bp); - else - gpio_port = params->port; - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW, - gpio_port); - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_LOW, - gpio_port); - DP(NETIF_MSG_LINK, "reset external PHY\n"); -} - -static int bnx2x_update_link_down(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - - DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port); - bnx2x_set_led(params, vars, LED_MODE_OFF, 0); - vars->phy_flags &= ~PHY_PHYSICAL_LINK_FLAG; - /* indicate no mac active */ - vars->mac_type = MAC_TYPE_NONE; - - /* update shared memory */ - vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK | - LINK_STATUS_LINK_UP | - LINK_STATUS_PHYSICAL_LINK_FLAG | - LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | - LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | - LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | - LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK); - vars->line_speed = 0; - bnx2x_update_mng(params, vars->link_status); - - /* activate nig drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); - - /* disable emac */ - if (!CHIP_IS_E3(bp)) - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); - - msleep(10); - /* reset BigMac/Xmac */ - if (CHIP_IS_E1x(bp) || - CHIP_IS_E2(bp)) { - bnx2x_bmac_rx_disable(bp, params->port); - REG_WR(bp, GRCBASE_MISC + - MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - } - if (CHIP_IS_E3(bp)) - bnx2x_xmac_disable(params); - - return 0; -} - -static int bnx2x_update_link_up(struct link_params *params, - struct link_vars *vars, - u8 link_10g) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - int rc = 0; - - vars->link_status |= (LINK_STATUS_LINK_UP | - LINK_STATUS_PHYSICAL_LINK_FLAG); - vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG; - - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) - vars->link_status |= - LINK_STATUS_TX_FLOW_CONTROL_ENABLED; - - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) - vars->link_status |= - LINK_STATUS_RX_FLOW_CONTROL_ENABLED; - if (USES_WARPCORE(bp)) { - if (link_10g) { - if (bnx2x_xmac_enable(params, vars, 0) == - -ESRCH) { - DP(NETIF_MSG_LINK, "Found errors on XMAC\n"); - vars->link_up = 0; - vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; - vars->link_status &= ~LINK_STATUS_LINK_UP; - } - } else - bnx2x_umac_enable(params, vars, 0); - bnx2x_set_led(params, vars, - LED_MODE_OPER, vars->line_speed); - } - if ((CHIP_IS_E1x(bp) || - CHIP_IS_E2(bp))) { - if (link_10g) { - if (bnx2x_bmac_enable(params, vars, 0) == - -ESRCH) { - DP(NETIF_MSG_LINK, "Found errors on BMAC\n"); - vars->link_up = 0; - vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; - vars->link_status &= ~LINK_STATUS_LINK_UP; - } - - bnx2x_set_led(params, vars, - LED_MODE_OPER, SPEED_10000); - } else { - rc = bnx2x_emac_program(params, vars); - bnx2x_emac_enable(params, vars, 0); - - /* AN complete? */ - if ((vars->link_status & - LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) - && (!(vars->phy_flags & PHY_SGMII_FLAG)) && - SINGLE_MEDIA_DIRECT(params)) - bnx2x_set_gmii_tx_driver(params); - } - } - - /* PBF - link up */ - if (CHIP_IS_E1x(bp)) - rc |= bnx2x_pbf_update(params, vars->flow_ctrl, - vars->line_speed); - - /* disable drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0); - - /* update shared memory */ - bnx2x_update_mng(params, vars->link_status); - msleep(20); - return rc; -} -/* - * The bnx2x_link_update function should be called upon link - * interrupt. - * Link is considered up as follows: - * - DIRECT_SINGLE_MEDIA - Only XGXS link (internal link) needs - * to be up - * - SINGLE_MEDIA - The link between the 577xx and the external - * phy (XGXS) need to up as well as the external link of the - * phy (PHY_EXT1) - * - DUAL_MEDIA - The link between the 577xx and the first - * external phy needs to be up, and at least one of the 2 - * external phy link must be up. - */ -int bnx2x_link_update(struct link_params *params, struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - struct link_vars phy_vars[MAX_PHYS]; - u8 port = params->port; - u8 link_10g_plus, phy_index; - u8 ext_phy_link_up = 0, cur_link_up; - int rc = 0; - u8 is_mi_int = 0; - u16 ext_phy_line_speed = 0, prev_line_speed = vars->line_speed; - u8 active_external_phy = INT_PHY; - vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG; - for (phy_index = INT_PHY; phy_index < params->num_phys; - phy_index++) { - phy_vars[phy_index].flow_ctrl = 0; - phy_vars[phy_index].link_status = 0; - phy_vars[phy_index].line_speed = 0; - phy_vars[phy_index].duplex = DUPLEX_FULL; - phy_vars[phy_index].phy_link_up = 0; - phy_vars[phy_index].link_up = 0; - phy_vars[phy_index].fault_detected = 0; - } - - if (USES_WARPCORE(bp)) - bnx2x_set_aer_mmd(params, ¶ms->phy[INT_PHY]); - - DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n", - port, (vars->phy_flags & PHY_XGXS_FLAG), - REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); - - is_mi_int = (u8)(REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + - port*0x18) > 0); - DP(NETIF_MSG_LINK, "int_mask 0x%x MI_INT %x, SERDES_LINK %x\n", - REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), - is_mi_int, - REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c)); - - DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n", - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); - - /* disable emac */ - if (!CHIP_IS_E3(bp)) - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); - - /* - * Step 1: - * Check external link change only for external phys, and apply - * priority selection between them in case the link on both phys - * is up. Note that instead of the common vars, a temporary - * vars argument is used since each phy may have different link/ - * speed/duplex result - */ - for (phy_index = EXT_PHY1; phy_index < params->num_phys; - phy_index++) { - struct bnx2x_phy *phy = ¶ms->phy[phy_index]; - if (!phy->read_status) - continue; - /* Read link status and params of this ext phy */ - cur_link_up = phy->read_status(phy, params, - &phy_vars[phy_index]); - if (cur_link_up) { - DP(NETIF_MSG_LINK, "phy in index %d link is up\n", - phy_index); - } else { - DP(NETIF_MSG_LINK, "phy in index %d link is down\n", - phy_index); - continue; - } - - if (!ext_phy_link_up) { - ext_phy_link_up = 1; - active_external_phy = phy_index; - } else { - switch (bnx2x_phy_selection(params)) { - case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT: - case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY: - /* - * In this option, the first PHY makes sure to pass the - * traffic through itself only. - * Its not clear how to reset the link on the second phy - */ - active_external_phy = EXT_PHY1; - break; - case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY: - /* - * In this option, the first PHY makes sure to pass the - * traffic through the second PHY. - */ - active_external_phy = EXT_PHY2; - break; - default: - /* - * Link indication on both PHYs with the following cases - * is invalid: - * - FIRST_PHY means that second phy wasn't initialized, - * hence its link is expected to be down - * - SECOND_PHY means that first phy should not be able - * to link up by itself (using configuration) - * - DEFAULT should be overriden during initialiazation - */ - DP(NETIF_MSG_LINK, "Invalid link indication" - "mpc=0x%x. DISABLING LINK !!!\n", - params->multi_phy_config); - ext_phy_link_up = 0; - break; - } - } - } - prev_line_speed = vars->line_speed; - /* - * Step 2: - * Read the status of the internal phy. In case of - * DIRECT_SINGLE_MEDIA board, this link is the external link, - * otherwise this is the link between the 577xx and the first - * external phy - */ - if (params->phy[INT_PHY].read_status) - params->phy[INT_PHY].read_status( - ¶ms->phy[INT_PHY], - params, vars); - /* - * The INT_PHY flow control reside in the vars. This include the - * case where the speed or flow control are not set to AUTO. - * Otherwise, the active external phy flow control result is set - * to the vars. The ext_phy_line_speed is needed to check if the - * speed is different between the internal phy and external phy. - * This case may be result of intermediate link speed change. - */ - if (active_external_phy > INT_PHY) { - vars->flow_ctrl = phy_vars[active_external_phy].flow_ctrl; - /* - * Link speed is taken from the XGXS. AN and FC result from - * the external phy. - */ - vars->link_status |= phy_vars[active_external_phy].link_status; - - /* - * if active_external_phy is first PHY and link is up - disable - * disable TX on second external PHY - */ - if (active_external_phy == EXT_PHY1) { - if (params->phy[EXT_PHY2].phy_specific_func) { - DP(NETIF_MSG_LINK, "Disabling TX on" - " EXT_PHY2\n"); - params->phy[EXT_PHY2].phy_specific_func( - ¶ms->phy[EXT_PHY2], - params, DISABLE_TX); - } - } - - ext_phy_line_speed = phy_vars[active_external_phy].line_speed; - vars->duplex = phy_vars[active_external_phy].duplex; - if (params->phy[active_external_phy].supported & - SUPPORTED_FIBRE) - vars->link_status |= LINK_STATUS_SERDES_LINK; - else - vars->link_status &= ~LINK_STATUS_SERDES_LINK; - DP(NETIF_MSG_LINK, "Active external phy selected: %x\n", - active_external_phy); - } - - for (phy_index = EXT_PHY1; phy_index < params->num_phys; - phy_index++) { - if (params->phy[phy_index].flags & - FLAGS_REARM_LATCH_SIGNAL) { - bnx2x_rearm_latch_signal(bp, port, - phy_index == - active_external_phy); - break; - } - } - DP(NETIF_MSG_LINK, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x," - " ext_phy_line_speed = %d\n", vars->flow_ctrl, - vars->link_status, ext_phy_line_speed); - /* - * Upon link speed change set the NIG into drain mode. Comes to - * deals with possible FIFO glitch due to clk change when speed - * is decreased without link down indicator - */ - - if (vars->phy_link_up) { - if (!(SINGLE_MEDIA_DIRECT(params)) && ext_phy_link_up && - (ext_phy_line_speed != vars->line_speed)) { - DP(NETIF_MSG_LINK, "Internal link speed %d is" - " different than the external" - " link speed %d\n", vars->line_speed, - ext_phy_line_speed); - vars->phy_link_up = 0; - } else if (prev_line_speed != vars->line_speed) { - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, - 0); - msleep(1); - } - } - - /* anything 10 and over uses the bmac */ - link_10g_plus = (vars->line_speed >= SPEED_10000); - - bnx2x_link_int_ack(params, vars, link_10g_plus); - - /* - * In case external phy link is up, and internal link is down - * (not initialized yet probably after link initialization, it - * needs to be initialized. - * Note that after link down-up as result of cable plug, the xgxs - * link would probably become up again without the need - * initialize it - */ - if (!(SINGLE_MEDIA_DIRECT(params))) { - DP(NETIF_MSG_LINK, "ext_phy_link_up = %d, int_link_up = %d," - " init_preceding = %d\n", ext_phy_link_up, - vars->phy_link_up, - params->phy[EXT_PHY1].flags & - FLAGS_INIT_XGXS_FIRST); - if (!(params->phy[EXT_PHY1].flags & - FLAGS_INIT_XGXS_FIRST) - && ext_phy_link_up && !vars->phy_link_up) { - vars->line_speed = ext_phy_line_speed; - if (vars->line_speed < SPEED_1000) - vars->phy_flags |= PHY_SGMII_FLAG; - else - vars->phy_flags &= ~PHY_SGMII_FLAG; - - if (params->phy[INT_PHY].config_init) - params->phy[INT_PHY].config_init( - ¶ms->phy[INT_PHY], params, - vars); - } - } - /* - * Link is up only if both local phy and external phy (in case of - * non-direct board) are up and no fault detected on active PHY. - */ - vars->link_up = (vars->phy_link_up && - (ext_phy_link_up || - SINGLE_MEDIA_DIRECT(params)) && - (phy_vars[active_external_phy].fault_detected == 0)); - - if (vars->link_up) - rc = bnx2x_update_link_up(params, vars, link_10g_plus); - else - rc = bnx2x_update_link_down(params, vars); - - return rc; -} - - -/*****************************************************************************/ -/* External Phy section */ -/*****************************************************************************/ -void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port) -{ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW, port); - msleep(1); - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, port); -} - -static void bnx2x_save_spirom_version(struct bnx2x *bp, u8 port, - u32 spirom_ver, u32 ver_addr) -{ - DP(NETIF_MSG_LINK, "FW version 0x%x:0x%x for port %d\n", - (u16)(spirom_ver>>16), (u16)spirom_ver, port); - - if (ver_addr) - REG_WR(bp, ver_addr, spirom_ver); -} - -static void bnx2x_save_bcm_spirom_ver(struct bnx2x *bp, - struct bnx2x_phy *phy, - u8 port) -{ - u16 fw_ver1, fw_ver2; - - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER1, &fw_ver1); - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER2, &fw_ver2); - bnx2x_save_spirom_version(bp, port, (u32)(fw_ver1<<16 | fw_ver2), - phy->ver_addr); -} - -static void bnx2x_ext_phy_10G_an_resolve(struct bnx2x *bp, - struct bnx2x_phy *phy, - struct link_vars *vars) -{ - u16 val; - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_STATUS, &val); - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_STATUS, &val); - if (val & (1<<5)) - vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; - if ((val & (1<<0)) == 0) - vars->link_status |= LINK_STATUS_PARALLEL_DETECTION_USED; -} - -/******************************************************************/ -/* common BCM8073/BCM8727 PHY SECTION */ -/******************************************************************/ -static void bnx2x_8073_resolve_fc(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - if (phy->req_line_speed == SPEED_10 || - phy->req_line_speed == SPEED_100) { - vars->flow_ctrl = phy->req_flow_ctrl; - return; - } - - if (bnx2x_ext_phy_resolve_fc(phy, params, vars) && - (vars->flow_ctrl == BNX2X_FLOW_CTRL_NONE)) { - u16 pause_result; - u16 ld_pause; /* local */ - u16 lp_pause; /* link partner */ - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_FC_LD, &ld_pause); - - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_FC_LP, &lp_pause); - pause_result = (ld_pause & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 5; - pause_result |= (lp_pause & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7; - - bnx2x_pause_resolve(vars, pause_result); - DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x\n", - pause_result); - } -} -static int bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp, - struct bnx2x_phy *phy, - u8 port) -{ - u32 count = 0; - u16 fw_ver1, fw_msgout; - int rc = 0; - - /* Boot port from external ROM */ - /* EDC grst */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - 0x0001); - - /* ucode reboot and rst */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - 0x008c); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL1, 0x0001); - - /* Reset internal microprocessor */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET); - - /* Release srst bit */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); - - /* Delay 100ms per the PHY specifications */ - msleep(100); - - /* 8073 sometimes taking longer to download */ - do { - count++; - if (count > 300) { - DP(NETIF_MSG_LINK, - "bnx2x_8073_8727_external_rom_boot port %x:" - "Download failed. fw version = 0x%x\n", - port, fw_ver1); - rc = -EINVAL; - break; - } - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER1, &fw_ver1); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_M8051_MSGOUT_REG, &fw_msgout); - - msleep(1); - } while (fw_ver1 == 0 || fw_ver1 == 0x4321 || - ((fw_msgout & 0xff) != 0x03 && (phy->type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))); - - /* Clear ser_boot_ctl bit */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL1, 0x0000); - bnx2x_save_bcm_spirom_ver(bp, phy, port); - - DP(NETIF_MSG_LINK, - "bnx2x_8073_8727_external_rom_boot port %x:" - "Download complete. fw version = 0x%x\n", - port, fw_ver1); - - return rc; -} - -/******************************************************************/ -/* BCM8073 PHY SECTION */ -/******************************************************************/ -static int bnx2x_8073_is_snr_needed(struct bnx2x *bp, struct bnx2x_phy *phy) -{ - /* This is only required for 8073A1, version 102 only */ - u16 val; - - /* Read 8073 HW revision*/ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_CHIP_REV, &val); - - if (val != 1) { - /* No need to workaround in 8073 A1 */ - return 0; - } - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER2, &val); - - /* SNR should be applied only for version 0x102 */ - if (val != 0x102) - return 0; - - return 1; -} - -static int bnx2x_8073_xaui_wa(struct bnx2x *bp, struct bnx2x_phy *phy) -{ - u16 val, cnt, cnt1 ; - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_CHIP_REV, &val); - - if (val > 0) { - /* No need to workaround in 8073 A1 */ - return 0; - } - /* XAUI workaround in 8073 A0: */ - - /* - * After loading the boot ROM and restarting Autoneg, poll - * Dev1, Reg $C820: - */ - - for (cnt = 0; cnt < 1000; cnt++) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_SPEED_LINK_STATUS, - &val); - /* - * If bit [14] = 0 or bit [13] = 0, continue on with - * system initialization (XAUI work-around not required, as - * these bits indicate 2.5G or 1G link up). - */ - if (!(val & (1<<14)) || !(val & (1<<13))) { - DP(NETIF_MSG_LINK, "XAUI work-around not required\n"); - return 0; - } else if (!(val & (1<<15))) { - DP(NETIF_MSG_LINK, "bit 15 went off\n"); - /* - * If bit 15 is 0, then poll Dev1, Reg $C841 until it's - * MSB (bit15) goes to 1 (indicating that the XAUI - * workaround has completed), then continue on with - * system initialization. - */ - for (cnt1 = 0; cnt1 < 1000; cnt1++) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_XAUI_WA, &val); - if (val & (1<<15)) { - DP(NETIF_MSG_LINK, - "XAUI workaround has completed\n"); - return 0; - } - msleep(3); - } - break; - } - msleep(3); - } - DP(NETIF_MSG_LINK, "Warning: XAUI work-around timeout !!!\n"); - return -EINVAL; -} - -static void bnx2x_807x_force_10G(struct bnx2x *bp, struct bnx2x_phy *phy) -{ - /* Force KR or KX */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x2040); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0x000b); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_BCM_CTRL, 0x0000); - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x0000); -} - -static void bnx2x_8073_set_pause_cl37(struct link_params *params, - struct bnx2x_phy *phy, - struct link_vars *vars) -{ - u16 cl37_val; - struct bnx2x *bp = params->bp; - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, &cl37_val); - - cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ - bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) { - cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC; - } - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) { - cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - } - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { - cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - } - DP(NETIF_MSG_LINK, - "Ext phy AN advertize cl37 0x%x\n", cl37_val); - - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, cl37_val); - msleep(500); -} - -static int bnx2x_8073_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 val = 0, tmp1; - u8 gpio_port; - DP(NETIF_MSG_LINK, "Init 8073\n"); - - if (CHIP_IS_E2(bp)) - gpio_port = BP_PATH(bp); - else - gpio_port = params->port; - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port); - - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port); - - /* enable LASI */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, (1<<2)); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x0004); - - bnx2x_8073_set_pause_cl37(params, phy, vars); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1); - - DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1); - - /* Swap polarity if required - Must be done only in non-1G mode */ - if (params->lane_config & PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) { - /* Configure the 8073 to swap _P and _N of the KR lines */ - DP(NETIF_MSG_LINK, "Swapping polarity for the 8073\n"); - /* 10G Rx/Tx and 1G Tx signal polarity swap */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL, &val); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL, - (val | (3<<9))); - } - - - /* Enable CL37 BAM */ - if (REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, dev_info. - port_hw_config[params->port].default_cfg)) & - PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) { - - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8073_BAM, &val); - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8073_BAM, val | 1); - DP(NETIF_MSG_LINK, "Enable CL37 BAM on KR\n"); - } - if (params->loopback_mode == LOOPBACK_EXT) { - bnx2x_807x_force_10G(bp, phy); - DP(NETIF_MSG_LINK, "Forced speed 10G on 807X\n"); - return 0; - } else { - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_BCM_CTRL, 0x0002); - } - if (phy->req_line_speed != SPEED_AUTO_NEG) { - if (phy->req_line_speed == SPEED_10000) { - val = (1<<7); - } else if (phy->req_line_speed == SPEED_2500) { - val = (1<<5); - /* - * Note that 2.5G works only when used with 1G - * advertisement - */ - } else - val = (1<<5); - } else { - val = 0; - if (phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) - val |= (1<<7); - - /* Note that 2.5G works only when used with 1G advertisement */ - if (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G | - PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) - val |= (1<<5); - DP(NETIF_MSG_LINK, "807x autoneg val = 0x%x\n", val); - } - - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, val); - bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8073_2_5G, &tmp1); - - if (((phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) && - (phy->req_line_speed == SPEED_AUTO_NEG)) || - (phy->req_line_speed == SPEED_2500)) { - u16 phy_ver; - /* Allow 2.5G for A1 and above */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, - &phy_ver); - DP(NETIF_MSG_LINK, "Add 2.5G\n"); - if (phy_ver > 0) - tmp1 |= 1; - else - tmp1 &= 0xfffe; - } else { - DP(NETIF_MSG_LINK, "Disable 2.5G\n"); - tmp1 &= 0xfffe; - } - - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8073_2_5G, tmp1); - /* Add support for CL37 (passive mode) II */ - - bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, &tmp1); - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, - (tmp1 | ((phy->req_duplex == DUPLEX_FULL) ? - 0x20 : 0x40))); - - /* Add support for CL37 (passive mode) III */ - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000); - - /* - * The SNR will improve about 2db by changing BW and FEE main - * tap. Rest commands are executed after link is up - * Change FFE main cursor to 5 in EDC register - */ - if (bnx2x_8073_is_snr_needed(bp, phy)) - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_EDC_FFE_MAIN, - 0xFB0C); - - /* Enable FEC (Forware Error Correction) Request in the AN */ - bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV2, &tmp1); - tmp1 |= (1<<15); - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV2, tmp1); - - bnx2x_ext_phy_set_pause(params, phy, vars); - - /* Restart autoneg */ - msleep(500); - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200); - DP(NETIF_MSG_LINK, "807x Autoneg Restart: Advertise 1G=%x, 10G=%x\n", - ((val & (1<<5)) > 0), ((val & (1<<7)) > 0)); - return 0; -} - -static u8 bnx2x_8073_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 link_up = 0; - u16 val1, val2; - u16 link_status = 0; - u16 an1000_status = 0; - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); - - DP(NETIF_MSG_LINK, "8703 LASI status 0x%x\n", val1); - - /* clear the interrupt LASI status register */ - bnx2x_cl45_read(bp, phy, - MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2); - bnx2x_cl45_read(bp, phy, - MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val1); - DP(NETIF_MSG_LINK, "807x PCS status 0x%x->0x%x\n", val2, val1); - /* Clear MSG-OUT */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &val1); - - /* Check the LASI */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2); - - DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2); - - /* Check the link status */ - bnx2x_cl45_read(bp, phy, - MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2); - DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); - link_up = ((val1 & 4) == 4); - DP(NETIF_MSG_LINK, "PMA_REG_STATUS=0x%x\n", val1); - - if (link_up && - ((phy->req_line_speed != SPEED_10000))) { - if (bnx2x_8073_xaui_wa(bp, phy) != 0) - return 0; - } - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &an1000_status); - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &an1000_status); - - /* Check the link status on 1.1.2 */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); - DP(NETIF_MSG_LINK, "KR PMA status 0x%x->0x%x," - "an_link_status=0x%x\n", val2, val1, an1000_status); - - link_up = (((val1 & 4) == 4) || (an1000_status & (1<<1))); - if (link_up && bnx2x_8073_is_snr_needed(bp, phy)) { - /* - * The SNR will improve about 2dbby changing the BW and FEE main - * tap. The 1st write to change FFE main tap is set before - * restart AN. Change PLL Bandwidth in EDC register - */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_PLL_BANDWIDTH, - 0x26BC); - - /* Change CDR Bandwidth in EDC register */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_CDR_BANDWIDTH, - 0x0333); - } - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_SPEED_LINK_STATUS, - &link_status); - - /* Bits 0..2 --> speed detected, bits 13..15--> link is down */ - if ((link_status & (1<<2)) && (!(link_status & (1<<15)))) { - link_up = 1; - vars->line_speed = SPEED_10000; - DP(NETIF_MSG_LINK, "port %x: External link up in 10G\n", - params->port); - } else if ((link_status & (1<<1)) && (!(link_status & (1<<14)))) { - link_up = 1; - vars->line_speed = SPEED_2500; - DP(NETIF_MSG_LINK, "port %x: External link up in 2.5G\n", - params->port); - } else if ((link_status & (1<<0)) && (!(link_status & (1<<13)))) { - link_up = 1; - vars->line_speed = SPEED_1000; - DP(NETIF_MSG_LINK, "port %x: External link up in 1G\n", - params->port); - } else { - link_up = 0; - DP(NETIF_MSG_LINK, "port %x: External link is down\n", - params->port); - } - - if (link_up) { - /* Swap polarity if required */ - if (params->lane_config & - PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) { - /* Configure the 8073 to swap P and N of the KR lines */ - bnx2x_cl45_read(bp, phy, - MDIO_XS_DEVAD, - MDIO_XS_REG_8073_RX_CTRL_PCIE, &val1); - /* - * Set bit 3 to invert Rx in 1G mode and clear this bit - * when it`s in 10G mode. - */ - if (vars->line_speed == SPEED_1000) { - DP(NETIF_MSG_LINK, "Swapping 1G polarity for" - "the 8073\n"); - val1 |= (1<<3); - } else - val1 &= ~(1<<3); - - bnx2x_cl45_write(bp, phy, - MDIO_XS_DEVAD, - MDIO_XS_REG_8073_RX_CTRL_PCIE, - val1); - } - bnx2x_ext_phy_10G_an_resolve(bp, phy, vars); - bnx2x_8073_resolve_fc(phy, params, vars); - vars->duplex = DUPLEX_FULL; - } - return link_up; -} - -static void bnx2x_8073_link_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 gpio_port; - if (CHIP_IS_E2(bp)) - gpio_port = BP_PATH(bp); - else - gpio_port = params->port; - DP(NETIF_MSG_LINK, "Setting 8073 port %d into low power mode\n", - gpio_port); - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_LOW, - gpio_port); -} - -/******************************************************************/ -/* BCM8705 PHY SECTION */ -/******************************************************************/ -static int bnx2x_8705_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "init 8705\n"); - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); - /* HW reset */ - bnx2x_ext_phy_hw_reset(bp, params->port); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040); - bnx2x_wait_reset_complete(bp, phy, params); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL, 0x8288); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, 0x7fbf); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_CMU_PLL_BYPASS, 0x0100); - bnx2x_cl45_write(bp, phy, - MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_CNTL, 0x1); - /* BCM8705 doesn't have microcode, hence the 0 */ - bnx2x_save_spirom_version(bp, params->port, params->shmem_base, 0); - return 0; -} - -static u8 bnx2x_8705_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - u8 link_up = 0; - u16 val1, rx_sd; - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "read status 8705\n"); - bnx2x_cl45_read(bp, phy, - MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); - - bnx2x_cl45_read(bp, phy, - MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, 0xc809, &val1); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, 0xc809, &val1); - - DP(NETIF_MSG_LINK, "8705 1.c809 val=0x%x\n", val1); - link_up = ((rx_sd & 0x1) && (val1 & (1<<9)) && ((val1 & (1<<8)) == 0)); - if (link_up) { - vars->line_speed = SPEED_10000; - bnx2x_ext_phy_resolve_fc(phy, params, vars); - } - return link_up; -} - -/******************************************************************/ -/* SFP+ module Section */ -/******************************************************************/ -static void bnx2x_set_disable_pmd_transmit(struct link_params *params, - struct bnx2x_phy *phy, - u8 pmd_dis) -{ - struct bnx2x *bp = params->bp; - /* - * Disable transmitter only for bootcodes which can enable it afterwards - * (for D3 link) - */ - if (pmd_dis) { - if (params->feature_config_flags & - FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED) - DP(NETIF_MSG_LINK, "Disabling PMD transmitter\n"); - else { - DP(NETIF_MSG_LINK, "NOT disabling PMD transmitter\n"); - return; - } - } else - DP(NETIF_MSG_LINK, "Enabling PMD transmitter\n"); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_TX_DISABLE, pmd_dis); -} - -static u8 bnx2x_get_gpio_port(struct link_params *params) -{ - u8 gpio_port; - u32 swap_val, swap_override; - struct bnx2x *bp = params->bp; - if (CHIP_IS_E2(bp)) - gpio_port = BP_PATH(bp); - else - gpio_port = params->port; - swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); - swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); - return gpio_port ^ (swap_val && swap_override); -} - -static void bnx2x_sfp_e1e2_set_transmitter(struct link_params *params, - struct bnx2x_phy *phy, - u8 tx_en) -{ - u16 val; - u8 port = params->port; - struct bnx2x *bp = params->bp; - u32 tx_en_mode; - - /* Disable/Enable transmitter ( TX laser of the SFP+ module.)*/ - tx_en_mode = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].sfp_ctrl)) & - PORT_HW_CFG_TX_LASER_MASK; - DP(NETIF_MSG_LINK, "Setting transmitter tx_en=%x for port %x " - "mode = %x\n", tx_en, port, tx_en_mode); - switch (tx_en_mode) { - case PORT_HW_CFG_TX_LASER_MDIO: - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - &val); - - if (tx_en) - val &= ~(1<<15); - else - val |= (1<<15); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - val); - break; - case PORT_HW_CFG_TX_LASER_GPIO0: - case PORT_HW_CFG_TX_LASER_GPIO1: - case PORT_HW_CFG_TX_LASER_GPIO2: - case PORT_HW_CFG_TX_LASER_GPIO3: - { - u16 gpio_pin; - u8 gpio_port, gpio_mode; - if (tx_en) - gpio_mode = MISC_REGISTERS_GPIO_OUTPUT_HIGH; - else - gpio_mode = MISC_REGISTERS_GPIO_OUTPUT_LOW; - - gpio_pin = tx_en_mode - PORT_HW_CFG_TX_LASER_GPIO0; - gpio_port = bnx2x_get_gpio_port(params); - bnx2x_set_gpio(bp, gpio_pin, gpio_mode, gpio_port); - break; - } - default: - DP(NETIF_MSG_LINK, "Invalid TX_LASER_MDIO 0x%x\n", tx_en_mode); - break; - } -} - -static void bnx2x_sfp_set_transmitter(struct link_params *params, - struct bnx2x_phy *phy, - u8 tx_en) -{ - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "Setting SFP+ transmitter to %d\n", tx_en); - if (CHIP_IS_E3(bp)) - bnx2x_sfp_e3_set_transmitter(params, phy, tx_en); - else - bnx2x_sfp_e1e2_set_transmitter(params, phy, tx_en); -} - -static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, - struct link_params *params, - u16 addr, u8 byte_cnt, u8 *o_buf) -{ - struct bnx2x *bp = params->bp; - u16 val = 0; - u16 i; - if (byte_cnt > 16) { - DP(NETIF_MSG_LINK, "Reading from eeprom is" - " is limited to 0xf\n"); - return -EINVAL; - } - /* Set the read command byte count */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT, - (byte_cnt | 0xa000)); - - /* Set the read command address */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR, - addr); - - /* Activate read command */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, - 0x2c0f); - - /* Wait up to 500us for command complete status */ - for (i = 0; i < 100; i++) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); - if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == - MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) - break; - udelay(5); - } - - if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) != - MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) { - DP(NETIF_MSG_LINK, - "Got bad status 0x%x when reading from SFP+ EEPROM\n", - (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK)); - return -EINVAL; - } - - /* Read the buffer */ - for (i = 0; i < byte_cnt; i++) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF + i, &val); - o_buf[i] = (u8)(val & MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK); - } - - for (i = 0; i < 100; i++) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); - if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == - MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE) - return 0; - msleep(1); - } - return -EINVAL; -} - -static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, - struct link_params *params, - u16 addr, u8 byte_cnt, - u8 *o_buf) -{ - int rc = 0; - u8 i, j = 0, cnt = 0; - u32 data_array[4]; - u16 addr32; - struct bnx2x *bp = params->bp; - /*DP(NETIF_MSG_LINK, "bnx2x_direct_read_sfp_module_eeprom:" - " addr %d, cnt %d\n", - addr, byte_cnt);*/ - if (byte_cnt > 16) { - DP(NETIF_MSG_LINK, "Reading from eeprom is" - " is limited to 16 bytes\n"); - return -EINVAL; - } - - /* 4 byte aligned address */ - addr32 = addr & (~0x3); - do { - rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt, - data_array); - } while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT)); - - if (rc == 0) { - for (i = (addr - addr32); i < byte_cnt + (addr - addr32); i++) { - o_buf[j] = *((u8 *)data_array + i); - j++; - } - } - - return rc; -} - -static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy, - struct link_params *params, - u16 addr, u8 byte_cnt, u8 *o_buf) -{ - struct bnx2x *bp = params->bp; - u16 val, i; - - if (byte_cnt > 16) { - DP(NETIF_MSG_LINK, "Reading from eeprom is" - " is limited to 0xf\n"); - return -EINVAL; - } - - /* Need to read from 1.8000 to clear it */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, - &val); - - /* Set the read command byte count */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT, - ((byte_cnt < 2) ? 2 : byte_cnt)); - - /* Set the read command address */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR, - addr); - /* Set the destination address */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - 0x8004, - MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF); - - /* Activate read command */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, - 0x8002); - /* - * Wait appropriate time for two-wire command to finish before - * polling the status register - */ - msleep(1); - - /* Wait up to 500us for command complete status */ - for (i = 0; i < 100; i++) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); - if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == - MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) - break; - udelay(5); - } - - if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) != - MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) { - DP(NETIF_MSG_LINK, - "Got bad status 0x%x when reading from SFP+ EEPROM\n", - (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK)); - return -EFAULT; - } - - /* Read the buffer */ - for (i = 0; i < byte_cnt; i++) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF + i, &val); - o_buf[i] = (u8)(val & MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK); - } - - for (i = 0; i < 100; i++) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); - if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == - MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE) - return 0; - msleep(1); - } - - return -EINVAL; -} - -int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, - struct link_params *params, u16 addr, - u8 byte_cnt, u8 *o_buf) -{ - int rc = -EINVAL; - switch (phy->type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: - rc = bnx2x_8726_read_sfp_module_eeprom(phy, params, addr, - byte_cnt, o_buf); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: - rc = bnx2x_8727_read_sfp_module_eeprom(phy, params, addr, - byte_cnt, o_buf); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, params, addr, - byte_cnt, o_buf); - break; - } - return rc; -} - -static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, - struct link_params *params, - u16 *edc_mode) -{ - struct bnx2x *bp = params->bp; - u32 sync_offset = 0, phy_idx, media_types; - u8 val, check_limiting_mode = 0; - *edc_mode = EDC_MODE_LIMITING; - - phy->media_type = ETH_PHY_UNSPECIFIED; - /* First check for copper cable */ - if (bnx2x_read_sfp_module_eeprom(phy, - params, - SFP_EEPROM_CON_TYPE_ADDR, - 1, - &val) != 0) { - DP(NETIF_MSG_LINK, "Failed to read from SFP+ module EEPROM\n"); - return -EINVAL; - } - - switch (val) { - case SFP_EEPROM_CON_TYPE_VAL_COPPER: - { - u8 copper_module_type; - phy->media_type = ETH_PHY_DA_TWINAX; - /* - * Check if its active cable (includes SFP+ module) - * of passive cable - */ - if (bnx2x_read_sfp_module_eeprom(phy, - params, - SFP_EEPROM_FC_TX_TECH_ADDR, - 1, - &copper_module_type) != 0) { - DP(NETIF_MSG_LINK, - "Failed to read copper-cable-type" - " from SFP+ EEPROM\n"); - return -EINVAL; - } - - if (copper_module_type & - SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) { - DP(NETIF_MSG_LINK, "Active Copper cable detected\n"); - check_limiting_mode = 1; - } else if (copper_module_type & - SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) { - DP(NETIF_MSG_LINK, "Passive Copper" - " cable detected\n"); - *edc_mode = - EDC_MODE_PASSIVE_DAC; - } else { - DP(NETIF_MSG_LINK, "Unknown copper-cable-" - "type 0x%x !!!\n", copper_module_type); - return -EINVAL; - } - break; - } - case SFP_EEPROM_CON_TYPE_VAL_LC: - phy->media_type = ETH_PHY_SFP_FIBER; - DP(NETIF_MSG_LINK, "Optic module detected\n"); - check_limiting_mode = 1; - break; - default: - DP(NETIF_MSG_LINK, "Unable to determine module type 0x%x !!!\n", - val); - return -EINVAL; - } - sync_offset = params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[params->port].media_type); - media_types = REG_RD(bp, sync_offset); - /* Update media type for non-PMF sync */ - for (phy_idx = INT_PHY; phy_idx < MAX_PHYS; phy_idx++) { - if (&(params->phy[phy_idx]) == phy) { - media_types &= ~(PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK << - (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * phy_idx)); - media_types |= ((phy->media_type & - PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) << - (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * phy_idx)); - break; - } - } - REG_WR(bp, sync_offset, media_types); - if (check_limiting_mode) { - u8 options[SFP_EEPROM_OPTIONS_SIZE]; - if (bnx2x_read_sfp_module_eeprom(phy, - params, - SFP_EEPROM_OPTIONS_ADDR, - SFP_EEPROM_OPTIONS_SIZE, - options) != 0) { - DP(NETIF_MSG_LINK, "Failed to read Option" - " field from module EEPROM\n"); - return -EINVAL; - } - if ((options[0] & SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK)) - *edc_mode = EDC_MODE_LINEAR; - else - *edc_mode = EDC_MODE_LIMITING; - } - DP(NETIF_MSG_LINK, "EDC mode is set to 0x%x\n", *edc_mode); - return 0; -} -/* - * This function read the relevant field from the module (SFP+), and verify it - * is compliant with this board - */ -static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u32 val, cmd; - u32 fw_resp, fw_cmd_param; - char vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE+1]; - char vendor_pn[SFP_EEPROM_PART_NO_SIZE+1]; - phy->flags &= ~FLAGS_SFP_NOT_APPROVED; - val = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, dev_info. - port_feature_config[params->port].config)); - if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == - PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT) { - DP(NETIF_MSG_LINK, "NOT enforcing module verification\n"); - return 0; - } - - if (params->feature_config_flags & - FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY) { - /* Use specific phy request */ - cmd = DRV_MSG_CODE_VRFY_SPECIFIC_PHY_OPT_MDL; - } else if (params->feature_config_flags & - FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY) { - /* Use first phy request only in case of non-dual media*/ - if (DUAL_MEDIA(params)) { - DP(NETIF_MSG_LINK, "FW does not support OPT MDL " - "verification\n"); - return -EINVAL; - } - cmd = DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL; - } else { - /* No support in OPT MDL detection */ - DP(NETIF_MSG_LINK, "FW does not support OPT MDL " - "verification\n"); - return -EINVAL; - } - - fw_cmd_param = FW_PARAM_SET(phy->addr, phy->type, phy->mdio_ctrl); - fw_resp = bnx2x_fw_command(bp, cmd, fw_cmd_param); - if (fw_resp == FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS) { - DP(NETIF_MSG_LINK, "Approved module\n"); - return 0; - } - - /* format the warning message */ - if (bnx2x_read_sfp_module_eeprom(phy, - params, - SFP_EEPROM_VENDOR_NAME_ADDR, - SFP_EEPROM_VENDOR_NAME_SIZE, - (u8 *)vendor_name)) - vendor_name[0] = '\0'; - else - vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE] = '\0'; - if (bnx2x_read_sfp_module_eeprom(phy, - params, - SFP_EEPROM_PART_NO_ADDR, - SFP_EEPROM_PART_NO_SIZE, - (u8 *)vendor_pn)) - vendor_pn[0] = '\0'; - else - vendor_pn[SFP_EEPROM_PART_NO_SIZE] = '\0'; - - netdev_err(bp->dev, "Warning: Unqualified SFP+ module detected," - " Port %d from %s part number %s\n", - params->port, vendor_name, vendor_pn); - phy->flags |= FLAGS_SFP_NOT_APPROVED; - return -EINVAL; -} - -static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, - struct link_params *params) - -{ - u8 val; - struct bnx2x *bp = params->bp; - u16 timeout; - /* - * Initialization time after hot-plug may take up to 300ms for - * some phys type ( e.g. JDSU ) - */ - - for (timeout = 0; timeout < 60; timeout++) { - if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val) - == 0) { - DP(NETIF_MSG_LINK, "SFP+ module initialization " - "took %d ms\n", timeout * 5); - return 0; - } - msleep(5); - } - return -EINVAL; -} - -static void bnx2x_8727_power_module(struct bnx2x *bp, - struct bnx2x_phy *phy, - u8 is_power_up) { - /* Make sure GPIOs are not using for LED mode */ - u16 val; - /* - * In the GPIO register, bit 4 is use to determine if the GPIOs are - * operating as INPUT or as OUTPUT. Bit 1 is for input, and 0 for - * output - * Bits 0-1 determine the GPIOs value for OUTPUT in case bit 4 val is 0 - * Bits 8-9 determine the GPIOs value for INPUT in case bit 4 val is 1 - * where the 1st bit is the over-current(only input), and 2nd bit is - * for power( only output ) - * - * In case of NOC feature is disabled and power is up, set GPIO control - * as input to enable listening of over-current indication - */ - if (phy->flags & FLAGS_NOC) - return; - if (is_power_up) - val = (1<<4); - else - /* - * Set GPIO control to OUTPUT, and set the power bit - * to according to the is_power_up - */ - val = (1<<1); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_GPIO_CTRL, - val); -} - -static int bnx2x_8726_set_limiting_mode(struct bnx2x *bp, - struct bnx2x_phy *phy, - u16 edc_mode) -{ - u16 cur_limiting_mode; - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER2, - &cur_limiting_mode); - DP(NETIF_MSG_LINK, "Current Limiting mode is 0x%x\n", - cur_limiting_mode); - - if (edc_mode == EDC_MODE_LIMITING) { - DP(NETIF_MSG_LINK, "Setting LIMITING MODE\n"); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER2, - EDC_MODE_LIMITING); - } else { /* LRM mode ( default )*/ - - DP(NETIF_MSG_LINK, "Setting LRM MODE\n"); - - /* - * Changing to LRM mode takes quite few seconds. So do it only - * if current mode is limiting (default is LRM) - */ - if (cur_limiting_mode != EDC_MODE_LIMITING) - return 0; - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_LRM_MODE, - 0); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER2, - 0x128); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL0, - 0x4008); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_LRM_MODE, - 0xaaaa); - } - return 0; -} - -static int bnx2x_8727_set_limiting_mode(struct bnx2x *bp, - struct bnx2x_phy *phy, - u16 edc_mode) -{ - u16 phy_identifier; - u16 rom_ver2_val; - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - &phy_identifier); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - (phy_identifier & ~(1<<9))); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER2, - &rom_ver2_val); - /* Keep the MSB 8-bits, and set the LSB 8-bits with the edc_mode */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER2, - (rom_ver2_val & 0xff00) | (edc_mode & 0x00ff)); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - (phy_identifier | (1<<9))); - - return 0; -} - -static void bnx2x_8727_specific_func(struct bnx2x_phy *phy, - struct link_params *params, - u32 action) -{ - struct bnx2x *bp = params->bp; - - switch (action) { - case DISABLE_TX: - bnx2x_sfp_set_transmitter(params, phy, 0); - break; - case ENABLE_TX: - if (!(phy->flags & FLAGS_SFP_NOT_APPROVED)) - bnx2x_sfp_set_transmitter(params, phy, 1); - break; - default: - DP(NETIF_MSG_LINK, "Function 0x%x not supported by 8727\n", - action); - return; - } -} - -static void bnx2x_set_e1e2_module_fault_led(struct link_params *params, - u8 gpio_mode) -{ - struct bnx2x *bp = params->bp; - - u32 fault_led_gpio = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[params->port].sfp_ctrl)) & - PORT_HW_CFG_FAULT_MODULE_LED_MASK; - switch (fault_led_gpio) { - case PORT_HW_CFG_FAULT_MODULE_LED_DISABLED: - return; - case PORT_HW_CFG_FAULT_MODULE_LED_GPIO0: - case PORT_HW_CFG_FAULT_MODULE_LED_GPIO1: - case PORT_HW_CFG_FAULT_MODULE_LED_GPIO2: - case PORT_HW_CFG_FAULT_MODULE_LED_GPIO3: - { - u8 gpio_port = bnx2x_get_gpio_port(params); - u16 gpio_pin = fault_led_gpio - - PORT_HW_CFG_FAULT_MODULE_LED_GPIO0; - DP(NETIF_MSG_LINK, "Set fault module-detected led " - "pin %x port %x mode %x\n", - gpio_pin, gpio_port, gpio_mode); - bnx2x_set_gpio(bp, gpio_pin, gpio_mode, gpio_port); - } - break; - default: - DP(NETIF_MSG_LINK, "Error: Invalid fault led mode 0x%x\n", - fault_led_gpio); - } -} - -static void bnx2x_set_e3_module_fault_led(struct link_params *params, - u8 gpio_mode) -{ - u32 pin_cfg; - u8 port = params->port; - struct bnx2x *bp = params->bp; - pin_cfg = (REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].e3_sfp_ctrl)) & - PORT_HW_CFG_E3_FAULT_MDL_LED_MASK) >> - PORT_HW_CFG_E3_FAULT_MDL_LED_SHIFT; - DP(NETIF_MSG_LINK, "Setting Fault LED to %d using pin cfg %d\n", - gpio_mode, pin_cfg); - bnx2x_set_cfg_pin(bp, pin_cfg, gpio_mode); -} - -static void bnx2x_set_sfp_module_fault_led(struct link_params *params, - u8 gpio_mode) -{ - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "Setting SFP+ module fault LED to %d\n", gpio_mode); - if (CHIP_IS_E3(bp)) { - /* - * Low ==> if SFP+ module is supported otherwise - * High ==> if SFP+ module is not on the approved vendor list - */ - bnx2x_set_e3_module_fault_led(params, gpio_mode); - } else - bnx2x_set_e1e2_module_fault_led(params, gpio_mode); -} - -static void bnx2x_warpcore_power_module(struct link_params *params, - struct bnx2x_phy *phy, - u8 power) -{ - u32 pin_cfg; - struct bnx2x *bp = params->bp; - - pin_cfg = (REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[params->port].e3_sfp_ctrl)) & - PORT_HW_CFG_E3_PWR_DIS_MASK) >> - PORT_HW_CFG_E3_PWR_DIS_SHIFT; - - if (pin_cfg == PIN_CFG_NA) - return; - DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n", - power, pin_cfg); - /* - * Low ==> corresponding SFP+ module is powered - * high ==> the SFP+ module is powered down - */ - bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1); -} - -static void bnx2x_warpcore_hw_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - bnx2x_warpcore_power_module(params, phy, 0); -} - -static void bnx2x_power_sfp_module(struct link_params *params, - struct bnx2x_phy *phy, - u8 power) -{ - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "Setting SFP+ power to %x\n", power); - - switch (phy->type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: - bnx2x_8727_power_module(params->bp, phy, power); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - bnx2x_warpcore_power_module(params, phy, power); - break; - default: - break; - } -} -static void bnx2x_warpcore_set_limiting_mode(struct link_params *params, - struct bnx2x_phy *phy, - u16 edc_mode) -{ - u16 val = 0; - u16 mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT; - struct bnx2x *bp = params->bp; - - u8 lane = bnx2x_get_warpcore_lane(phy, params); - /* This is a global register which controls all lanes */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val); - val &= ~(0xf << (lane << 2)); - - switch (edc_mode) { - case EDC_MODE_LINEAR: - case EDC_MODE_LIMITING: - mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT; - break; - case EDC_MODE_PASSIVE_DAC: - mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC; - break; - default: - break; - } - - val |= (mode << (lane << 2)); - bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, val); - /* A must read */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val); - - /* Restart microcode to re-read the new mode */ - bnx2x_warpcore_reset_lane(bp, phy, 1); - bnx2x_warpcore_reset_lane(bp, phy, 0); - -} - -static void bnx2x_set_limiting_mode(struct link_params *params, - struct bnx2x_phy *phy, - u16 edc_mode) -{ - switch (phy->type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: - bnx2x_8726_set_limiting_mode(params->bp, phy, edc_mode); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: - bnx2x_8727_set_limiting_mode(params->bp, phy, edc_mode); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - bnx2x_warpcore_set_limiting_mode(params, phy, edc_mode); - break; - } -} - -int bnx2x_sfp_module_detection(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 edc_mode; - int rc = 0; - - u32 val = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, dev_info. - port_feature_config[params->port].config)); - - DP(NETIF_MSG_LINK, "SFP+ module plugged in/out detected on port %d\n", - params->port); - /* Power up module */ - bnx2x_power_sfp_module(params, phy, 1); - if (bnx2x_get_edc_mode(phy, params, &edc_mode) != 0) { - DP(NETIF_MSG_LINK, "Failed to get valid module type\n"); - return -EINVAL; - } else if (bnx2x_verify_sfp_module(phy, params) != 0) { - /* check SFP+ module compatibility */ - DP(NETIF_MSG_LINK, "Module verification failed!!\n"); - rc = -EINVAL; - /* Turn on fault module-detected led */ - bnx2x_set_sfp_module_fault_led(params, - MISC_REGISTERS_GPIO_HIGH); - - /* Check if need to power down the SFP+ module */ - if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == - PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN) { - DP(NETIF_MSG_LINK, "Shutdown SFP+ module!!\n"); - bnx2x_power_sfp_module(params, phy, 0); - return rc; - } - } else { - /* Turn off fault module-detected led */ - bnx2x_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_LOW); - } - - /* - * Check and set limiting mode / LRM mode on 8726. On 8727 it - * is done automatically - */ - bnx2x_set_limiting_mode(params, phy, edc_mode); - - /* - * Enable transmit for this module if the module is approved, or - * if unapproved modules should also enable the Tx laser - */ - if (rc == 0 || - (val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) != - PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) - bnx2x_sfp_set_transmitter(params, phy, 1); - else - bnx2x_sfp_set_transmitter(params, phy, 0); - - return rc; -} - -void bnx2x_handle_module_detect_int(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - struct bnx2x_phy *phy; - u32 gpio_val; - u8 gpio_num, gpio_port; - if (CHIP_IS_E3(bp)) - phy = ¶ms->phy[INT_PHY]; - else - phy = ¶ms->phy[EXT_PHY1]; - - if (bnx2x_get_mod_abs_int_cfg(bp, params->chip_id, params->shmem_base, - params->port, &gpio_num, &gpio_port) == - -EINVAL) { - DP(NETIF_MSG_LINK, "Failed to get MOD_ABS interrupt config\n"); - return; - } - - /* Set valid module led off */ - bnx2x_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_HIGH); - - /* Get current gpio val reflecting module plugged in / out*/ - gpio_val = bnx2x_get_gpio(bp, gpio_num, gpio_port); - - /* Call the handling function in case module is detected */ - if (gpio_val == 0) { - bnx2x_power_sfp_module(params, phy, 1); - bnx2x_set_gpio_int(bp, gpio_num, - MISC_REGISTERS_GPIO_INT_OUTPUT_CLR, - gpio_port); - if (bnx2x_wait_for_sfp_module_initialized(phy, params) == 0) - bnx2x_sfp_module_detection(phy, params); - else - DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n"); - } else { - u32 val = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, dev_info. - port_feature_config[params->port]. - config)); - bnx2x_set_gpio_int(bp, gpio_num, - MISC_REGISTERS_GPIO_INT_OUTPUT_SET, - gpio_port); - /* - * Module was plugged out. - * Disable transmit for this module - */ - phy->media_type = ETH_PHY_NOT_PRESENT; - if (((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == - PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) || - CHIP_IS_E3(bp)) - bnx2x_sfp_set_transmitter(params, phy, 0); - } -} - -/******************************************************************/ -/* Used by 8706 and 8727 */ -/******************************************************************/ -static void bnx2x_sfp_mask_fault(struct bnx2x *bp, - struct bnx2x_phy *phy, - u16 alarm_status_offset, - u16 alarm_ctrl_offset) -{ - u16 alarm_status, val; - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, alarm_status_offset, - &alarm_status); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, alarm_status_offset, - &alarm_status); - /* Mask or enable the fault event. */ - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, alarm_ctrl_offset, &val); - if (alarm_status & (1<<0)) - val &= ~(1<<0); - else - val |= (1<<0); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, alarm_ctrl_offset, val); -} -/******************************************************************/ -/* common BCM8706/BCM8726 PHY SECTION */ -/******************************************************************/ -static u8 bnx2x_8706_8726_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - u8 link_up = 0; - u16 val1, val2, rx_sd, pcs_status; - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "XGXS 8706/8726\n"); - /* Clear RX Alarm*/ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2); - - bnx2x_sfp_mask_fault(bp, phy, MDIO_PMA_LASI_TXSTAT, - MDIO_PMA_LASI_TXCTRL); - - /* clear LASI indication*/ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2); - DP(NETIF_MSG_LINK, "8706/8726 LASI status 0x%x--> 0x%x\n", val1, val2); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd); - bnx2x_cl45_read(bp, phy, - MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &pcs_status); - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2); - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2); - - DP(NETIF_MSG_LINK, "8706/8726 rx_sd 0x%x pcs_status 0x%x 1Gbps" - " link_status 0x%x\n", rx_sd, pcs_status, val2); - /* - * link is up if both bit 0 of pmd_rx_sd and bit 0 of pcs_status - * are set, or if the autoneg bit 1 is set - */ - link_up = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1))); - if (link_up) { - if (val2 & (1<<1)) - vars->line_speed = SPEED_1000; - else - vars->line_speed = SPEED_10000; - bnx2x_ext_phy_resolve_fc(phy, params, vars); - vars->duplex = DUPLEX_FULL; - } - - /* Capture 10G link fault. Read twice to clear stale value. */ - if (vars->line_speed == SPEED_10000) { - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_LASI_TXSTAT, &val1); - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_LASI_TXSTAT, &val1); - if (val1 & (1<<0)) - vars->fault_detected = 1; - } - - return link_up; -} - -/******************************************************************/ -/* BCM8706 PHY SECTION */ -/******************************************************************/ -static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - u32 tx_en_mode; - u16 cnt, val, tmp1; - struct bnx2x *bp = params->bp; - - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); - /* HW reset */ - bnx2x_ext_phy_hw_reset(bp, params->port); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040); - bnx2x_wait_reset_complete(bp, phy, params); - - /* Wait until fw is loaded */ - for (cnt = 0; cnt < 100; cnt++) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER1, &val); - if (val) - break; - msleep(10); - } - DP(NETIF_MSG_LINK, "XGXS 8706 is initialized after %d ms\n", cnt); - if ((params->feature_config_flags & - FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { - u8 i; - u16 reg; - for (i = 0; i < 4; i++) { - reg = MDIO_XS_8706_REG_BANK_RX0 + - i*(MDIO_XS_8706_REG_BANK_RX1 - - MDIO_XS_8706_REG_BANK_RX0); - bnx2x_cl45_read(bp, phy, MDIO_XS_DEVAD, reg, &val); - /* Clear first 3 bits of the control */ - val &= ~0x7; - /* Set control bits according to configuration */ - val |= (phy->rx_preemphasis[i] & 0x7); - DP(NETIF_MSG_LINK, "Setting RX Equalizer to BCM8706" - " reg 0x%x <-- val 0x%x\n", reg, val); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, reg, val); - } - } - /* Force speed */ - if (phy->req_line_speed == SPEED_10000) { - DP(NETIF_MSG_LINK, "XGXS 8706 force 10Gbps\n"); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_DIGITAL_CTRL, 0x400); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL, - 0); - /* Arm LASI for link and Tx fault. */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 3); - } else { - /* Force 1Gbps using autoneg with 1G advertisement */ - - /* Allow CL37 through CL73 */ - DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n"); - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c); - - /* Enable Full-Duplex advertisement on CL37 */ - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LP, 0x0020); - /* Enable CL37 AN */ - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000); - /* 1G support */ - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_ADV, (1<<5)); - - /* Enable clause 73 AN */ - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, - 0x0400); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, - 0x0004); - } - bnx2x_save_bcm_spirom_ver(bp, phy, params->port); - - /* - * If TX Laser is controlled by GPIO_0, do not let PHY go into low - * power mode, if TX Laser is disabled - */ - - tx_en_mode = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[params->port].sfp_ctrl)) - & PORT_HW_CFG_TX_LASER_MASK; - - if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) { - DP(NETIF_MSG_LINK, "Enabling TXONOFF_PWRDN_DIS\n"); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL, &tmp1); - tmp1 |= 0x1; - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL, tmp1); - } - - return 0; -} - -static int bnx2x_8706_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - return bnx2x_8706_8726_read_status(phy, params, vars); -} - -/******************************************************************/ -/* BCM8726 PHY SECTION */ -/******************************************************************/ -static void bnx2x_8726_config_loopback(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "PMA/PMD ext_phy_loopback: 8726\n"); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0001); -} - -static void bnx2x_8726_external_rom_boot(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - /* Need to wait 100ms after reset */ - msleep(100); - - /* Micro controller re-boot */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x018B); - - /* Set soft reset */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL1, 0x0001); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); - - /* wait for 150ms for microcode load */ - msleep(150); - - /* Disable serial boot control, tristates pins SS_N, SCK, MOSI, MISO */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL1, 0x0000); - - msleep(200); - bnx2x_save_bcm_spirom_ver(bp, phy, params->port); -} - -static u8 bnx2x_8726_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 val1; - u8 link_up = bnx2x_8706_8726_read_status(phy, params, vars); - if (link_up) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, - &val1); - if (val1 & (1<<15)) { - DP(NETIF_MSG_LINK, "Tx is disabled\n"); - link_up = 0; - vars->line_speed = 0; - } - } - return link_up; -} - - -static int bnx2x_8726_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "Initializing BCM8726\n"); - - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); - bnx2x_wait_reset_complete(bp, phy, params); - - bnx2x_8726_external_rom_boot(phy, params); - - /* - * Need to call module detected on initialization since the module - * detection triggered by actual module insertion might occur before - * driver is loaded, and when driver is loaded, it reset all - * registers, including the transmitter - */ - bnx2x_sfp_module_detection(phy, params); - - if (phy->req_line_speed == SPEED_1000) { - DP(NETIF_MSG_LINK, "Setting 1G force\n"); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x40); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0xD); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x5); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, - 0x400); - } else if ((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) && - ((phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) != - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) { - DP(NETIF_MSG_LINK, "Setting 1G clause37\n"); - /* Set Flow control */ - bnx2x_ext_phy_set_pause(params, phy, vars); - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_ADV, 0x20); - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c); - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, 0x0020); - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000); - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200); - /* - * Enable RX-ALARM control to receive interrupt for 1G speed - * change - */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x4); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, - 0x400); - - } else { /* Default 10G. Set only LASI control */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 1); - } - - /* Set TX PreEmphasis if needed */ - if ((params->feature_config_flags & - FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { - DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x," - "TX_CTRL2 0x%x\n", - phy->tx_preemphasis[0], - phy->tx_preemphasis[1]); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8726_TX_CTRL1, - phy->tx_preemphasis[0]); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8726_TX_CTRL2, - phy->tx_preemphasis[1]); - } - - return 0; - -} - -static void bnx2x_8726_link_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "bnx2x_8726_link_reset port %d\n", params->port); - /* Set serial boot control for external load */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, 0x0001); -} - -/******************************************************************/ -/* BCM8727 PHY SECTION */ -/******************************************************************/ - -static void bnx2x_8727_set_link_led(struct bnx2x_phy *phy, - struct link_params *params, u8 mode) -{ - struct bnx2x *bp = params->bp; - u16 led_mode_bitmask = 0; - u16 gpio_pins_bitmask = 0; - u16 val; - /* Only NOC flavor requires to set the LED specifically */ - if (!(phy->flags & FLAGS_NOC)) - return; - switch (mode) { - case LED_MODE_FRONT_PANEL_OFF: - case LED_MODE_OFF: - led_mode_bitmask = 0; - gpio_pins_bitmask = 0x03; - break; - case LED_MODE_ON: - led_mode_bitmask = 0; - gpio_pins_bitmask = 0x02; - break; - case LED_MODE_OPER: - led_mode_bitmask = 0x60; - gpio_pins_bitmask = 0x11; - break; - } - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_PCS_OPT_CTRL, - &val); - val &= 0xff8f; - val |= led_mode_bitmask; - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_PCS_OPT_CTRL, - val); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_GPIO_CTRL, - &val); - val &= 0xffe0; - val |= gpio_pins_bitmask; - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_GPIO_CTRL, - val); -} -static void bnx2x_8727_hw_reset(struct bnx2x_phy *phy, - struct link_params *params) { - u32 swap_val, swap_override; - u8 port; - /* - * The PHY reset is controlled by GPIO 1. Fake the port number - * to cancel the swap done in set_gpio() - */ - struct bnx2x *bp = params->bp; - swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); - swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); - port = (swap_val && swap_override) ^ 1; - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW, port); -} - -static int bnx2x_8727_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - u32 tx_en_mode; - u16 tmp1, val, mod_abs, tmp2; - u16 rx_alarm_ctrl_val; - u16 lasi_ctrl_val; - struct bnx2x *bp = params->bp; - /* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */ - - bnx2x_wait_reset_complete(bp, phy, params); - rx_alarm_ctrl_val = (1<<2) | (1<<5) ; - /* Should be 0x6 to enable XS on Tx side. */ - lasi_ctrl_val = 0x0006; - - DP(NETIF_MSG_LINK, "Initializing BCM8727\n"); - /* enable LASI */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, - rx_alarm_ctrl_val); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL, - 0); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, lasi_ctrl_val); - - /* - * Initially configure MOD_ABS to interrupt when module is - * presence( bit 8) - */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs); - /* - * Set EDC off by setting OPTXLOS signal input to low (bit 9). - * When the EDC is off it locks onto a reference clock and avoids - * becoming 'lost' - */ - mod_abs &= ~(1<<8); - if (!(phy->flags & FLAGS_NOC)) - mod_abs &= ~(1<<9); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); - - - /* Enable/Disable PHY transmitter output */ - bnx2x_set_disable_pmd_transmit(params, phy, 0); - - /* Make MOD_ABS give interrupt on change */ - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL, - &val); - val |= (1<<12); - if (phy->flags & FLAGS_NOC) - val |= (3<<5); - - /* - * Set 8727 GPIOs to input to allow reading from the 8727 GPIO0 - * status which reflect SFP+ module over-current - */ - if (!(phy->flags & FLAGS_NOC)) - val &= 0xff8f; /* Reset bits 4-6 */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL, val); - - bnx2x_8727_power_module(bp, phy, 1); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1); - - /* Set option 1G speed */ - if (phy->req_line_speed == SPEED_1000) { - DP(NETIF_MSG_LINK, "Setting 1G force\n"); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x40); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0xD); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, &tmp1); - DP(NETIF_MSG_LINK, "1.7 = 0x%x\n", tmp1); - /* - * Power down the XAUI until link is up in case of dual-media - * and 1G - */ - if (DUAL_MEDIA(params)) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_PCS_GP, &val); - val |= (3<<10); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_PCS_GP, val); - } - } else if ((phy->req_line_speed == SPEED_AUTO_NEG) && - ((phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) && - ((phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) != - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) { - - DP(NETIF_MSG_LINK, "Setting 1G clause37\n"); - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL, 0); - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1300); - } else { - /* - * Since the 8727 has only single reset pin, need to set the 10G - * registers although it is default - */ - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL, - 0x0020); - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x0100); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x2040); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, - 0x0008); - } - - /* - * Set 2-wire transfer rate of SFP+ module EEPROM - * to 100Khz since some DACs(direct attached cables) do - * not work at 400Khz. - */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR, - 0xa001); - - /* Set TX PreEmphasis if needed */ - if ((params->feature_config_flags & - FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { - DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x\n", - phy->tx_preemphasis[0], - phy->tx_preemphasis[1]); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_TX_CTRL1, - phy->tx_preemphasis[0]); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_TX_CTRL2, - phy->tx_preemphasis[1]); - } - - /* - * If TX Laser is controlled by GPIO_0, do not let PHY go into low - * power mode, if TX Laser is disabled - */ - tx_en_mode = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[params->port].sfp_ctrl)) - & PORT_HW_CFG_TX_LASER_MASK; - - if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) { - - DP(NETIF_MSG_LINK, "Enabling TXONOFF_PWRDN_DIS\n"); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG, &tmp2); - tmp2 |= 0x1000; - tmp2 &= 0xFFEF; - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG, tmp2); - } - - return 0; -} - -static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 mod_abs, rx_alarm_status; - u32 val = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, dev_info. - port_feature_config[params->port]. - config)); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs); - if (mod_abs & (1<<8)) { - - /* Module is absent */ - DP(NETIF_MSG_LINK, "MOD_ABS indication " - "show module is absent\n"); - phy->media_type = ETH_PHY_NOT_PRESENT; - /* - * 1. Set mod_abs to detect next module - * presence event - * 2. Set EDC off by setting OPTXLOS signal input to low - * (bit 9). - * When the EDC is off it locks onto a reference clock and - * avoids becoming 'lost'. - */ - mod_abs &= ~(1<<8); - if (!(phy->flags & FLAGS_NOC)) - mod_abs &= ~(1<<9); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); - - /* - * Clear RX alarm since it stays up as long as - * the mod_abs wasn't changed - */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); - - } else { - /* Module is present */ - DP(NETIF_MSG_LINK, "MOD_ABS indication " - "show module is present\n"); - /* - * First disable transmitter, and if the module is ok, the - * module_detection will enable it - * 1. Set mod_abs to detect next module absent event ( bit 8) - * 2. Restore the default polarity of the OPRXLOS signal and - * this signal will then correctly indicate the presence or - * absence of the Rx signal. (bit 9) - */ - mod_abs |= (1<<8); - if (!(phy->flags & FLAGS_NOC)) - mod_abs |= (1<<9); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); - - /* - * Clear RX alarm since it stays up as long as the mod_abs - * wasn't changed. This is need to be done before calling the - * module detection, otherwise it will clear* the link update - * alarm - */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); - - - if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == - PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) - bnx2x_sfp_set_transmitter(params, phy, 0); - - if (bnx2x_wait_for_sfp_module_initialized(phy, params) == 0) - bnx2x_sfp_module_detection(phy, params); - else - DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n"); - } - - DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n", - rx_alarm_status); - /* No need to check link status in case of module plugged in/out */ -} - -static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) - -{ - struct bnx2x *bp = params->bp; - u8 link_up = 0, oc_port = params->port; - u16 link_status = 0; - u16 rx_alarm_status, lasi_ctrl, val1; - - /* If PHY is not initialized, do not check link status */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, - &lasi_ctrl); - if (!lasi_ctrl) - return 0; - - /* Check the LASI on Rx */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, - &rx_alarm_status); - vars->line_speed = 0; - DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n", rx_alarm_status); - - bnx2x_sfp_mask_fault(bp, phy, MDIO_PMA_LASI_TXSTAT, - MDIO_PMA_LASI_TXCTRL); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); - - DP(NETIF_MSG_LINK, "8727 LASI status 0x%x\n", val1); - - /* Clear MSG-OUT */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &val1); - - /* - * If a module is present and there is need to check - * for over current - */ - if (!(phy->flags & FLAGS_NOC) && !(rx_alarm_status & (1<<5))) { - /* Check over-current using 8727 GPIO0 input*/ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_GPIO_CTRL, - &val1); - - if ((val1 & (1<<8)) == 0) { - if (!CHIP_IS_E1x(bp)) - oc_port = BP_PATH(bp) + (params->port << 1); - DP(NETIF_MSG_LINK, "8727 Power fault has been detected" - " on port %d\n", oc_port); - netdev_err(bp->dev, "Error: Power fault on Port %d has" - " been detected and the power to " - "that SFP+ module has been removed" - " to prevent failure of the card." - " Please remove the SFP+ module and" - " restart the system to clear this" - " error.\n", - oc_port); - /* Disable all RX_ALARMs except for mod_abs */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_LASI_RXCTRL, (1<<5)); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, &val1); - /* Wait for module_absent_event */ - val1 |= (1<<8); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, val1); - /* Clear RX alarm */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); - return 0; - } - } /* Over current check */ - - /* When module absent bit is set, check module */ - if (rx_alarm_status & (1<<5)) { - bnx2x_8727_handle_mod_abs(phy, params); - /* Enable all mod_abs and link detection bits */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, - ((1<<5) | (1<<2))); - } - DP(NETIF_MSG_LINK, "Enabling 8727 TX laser if SFP is approved\n"); - bnx2x_8727_specific_func(phy, params, ENABLE_TX); - /* If transmitter is disabled, ignore false link up indication */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, &val1); - if (val1 & (1<<15)) { - DP(NETIF_MSG_LINK, "Tx is disabled\n"); - return 0; - } - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_SPEED_LINK_STATUS, &link_status); - - /* - * Bits 0..2 --> speed detected, - * Bits 13..15--> link is down - */ - if ((link_status & (1<<2)) && (!(link_status & (1<<15)))) { - link_up = 1; - vars->line_speed = SPEED_10000; - DP(NETIF_MSG_LINK, "port %x: External link up in 10G\n", - params->port); - } else if ((link_status & (1<<0)) && (!(link_status & (1<<13)))) { - link_up = 1; - vars->line_speed = SPEED_1000; - DP(NETIF_MSG_LINK, "port %x: External link up in 1G\n", - params->port); - } else { - link_up = 0; - DP(NETIF_MSG_LINK, "port %x: External link is down\n", - params->port); - } - - /* Capture 10G link fault. */ - if (vars->line_speed == SPEED_10000) { - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_LASI_TXSTAT, &val1); - - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_LASI_TXSTAT, &val1); - - if (val1 & (1<<0)) { - vars->fault_detected = 1; - } - } - - if (link_up) { - bnx2x_ext_phy_resolve_fc(phy, params, vars); - vars->duplex = DUPLEX_FULL; - DP(NETIF_MSG_LINK, "duplex = 0x%x\n", vars->duplex); - } - - if ((DUAL_MEDIA(params)) && - (phy->req_line_speed == SPEED_1000)) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_PCS_GP, &val1); - /* - * In case of dual-media board and 1G, power up the XAUI side, - * otherwise power it down. For 10G it is done automatically - */ - if (link_up) - val1 &= ~(3<<10); - else - val1 |= (3<<10); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_PCS_GP, val1); - } - return link_up; -} - -static void bnx2x_8727_link_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - - /* Enable/Disable PHY transmitter output */ - bnx2x_set_disable_pmd_transmit(params, phy, 1); - - /* Disable Transmitter */ - bnx2x_sfp_set_transmitter(params, phy, 0); - /* Clear LASI */ - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0); - -} - -/******************************************************************/ -/* BCM8481/BCM84823/BCM84833 PHY SECTION */ -/******************************************************************/ -static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy, - struct link_params *params) -{ - u16 val, fw_ver1, fw_ver2, cnt; - u8 port; - struct bnx2x *bp = params->bp; - - port = params->port; - - /* For the 32 bits registers in 848xx, access via MDIO2ARM interface.*/ - /* (1) set register 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */ - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0014); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B, 0x0000); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C, 0x0300); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x0009); - - for (cnt = 0; cnt < 100; cnt++) { - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val); - if (val & 1) - break; - udelay(5); - } - if (cnt == 100) { - DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(1)\n"); - bnx2x_save_spirom_version(bp, port, 0, - phy->ver_addr); - return; - } - - - /* 2) read register 0xc200_0000 (SPI_FW_STATUS) */ - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x000A); - for (cnt = 0; cnt < 100; cnt++) { - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val); - if (val & 1) - break; - udelay(5); - } - if (cnt == 100) { - DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(2)\n"); - bnx2x_save_spirom_version(bp, port, 0, - phy->ver_addr); - return; - } - - /* lower 16 bits of the register SPI_FW_STATUS */ - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B, &fw_ver1); - /* upper 16 bits of register SPI_FW_STATUS */ - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C, &fw_ver2); - - bnx2x_save_spirom_version(bp, port, (fw_ver2<<16) | fw_ver1, - phy->ver_addr); -} - -static void bnx2x_848xx_set_led(struct bnx2x *bp, - struct bnx2x_phy *phy) -{ - u16 val; - - /* PHYC_CTL_LED_CTL */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, &val); - val &= 0xFE00; - val |= 0x0092; - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, val); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK, - 0x80); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED2_MASK, - 0x18); - - /* Select activity source by Tx and Rx, as suggested by PHY AE */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED3_MASK, - 0x0006); - - /* Select the closest activity blink rate to that in 10/100/1000 */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED3_BLINK, - 0); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_84823_CTL_LED_CTL_1, &val); - val |= MDIO_PMA_REG_84823_LED3_STRETCH_EN; /* stretch_en for LED3*/ - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_84823_CTL_LED_CTL_1, val); - - /* 'Interrupt Mask' */ - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, - 0xFFFB, 0xFFFD); -} - -static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 autoneg_val, an_1000_val, an_10_100_val; - u16 tmp_req_line_speed; - - tmp_req_line_speed = phy->req_line_speed; - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) - if (phy->req_line_speed == SPEED_10000) - phy->req_line_speed = SPEED_AUTO_NEG; - - /* - * This phy uses the NIG latch mechanism since link indication - * arrives through its LED4 and not via its LASI signal, so we - * get steady signal instead of clear on read - */ - bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4, - 1 << NIG_LATCH_BC_ENABLE_MI_INT); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0000); - - bnx2x_848xx_set_led(bp, phy); - - /* set 1000 speed advertisement */ - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, - &an_1000_val); - - bnx2x_ext_phy_set_pause(params, phy, vars); - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_AN_ADV, - &an_10_100_val); - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_8481_LEGACY_MII_CTRL, - &autoneg_val); - /* Disable forced speed */ - autoneg_val &= ~((1<<6) | (1<<8) | (1<<9) | (1<<12) | (1<<13)); - an_10_100_val &= ~((1<<5) | (1<<6) | (1<<7) | (1<<8)); - - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || - (phy->req_line_speed == SPEED_1000)) { - an_1000_val |= (1<<8); - autoneg_val |= (1<<9 | 1<<12); - if (phy->req_duplex == DUPLEX_FULL) - an_1000_val |= (1<<9); - DP(NETIF_MSG_LINK, "Advertising 1G\n"); - } else - an_1000_val &= ~((1<<8) | (1<<9)); - - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, - an_1000_val); - - /* set 100 speed advertisement */ - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) && - (phy->supported & - (SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full)))) { - an_10_100_val |= (1<<7); - /* Enable autoneg and restart autoneg for legacy speeds */ - autoneg_val |= (1<<9 | 1<<12); - - if (phy->req_duplex == DUPLEX_FULL) - an_10_100_val |= (1<<8); - DP(NETIF_MSG_LINK, "Advertising 100M\n"); - } - /* set 10 speed advertisement */ - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) && - (phy->supported & - (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full)))) { - an_10_100_val |= (1<<5); - autoneg_val |= (1<<9 | 1<<12); - if (phy->req_duplex == DUPLEX_FULL) - an_10_100_val |= (1<<6); - DP(NETIF_MSG_LINK, "Advertising 10M\n"); - } - - /* Only 10/100 are allowed to work in FORCE mode */ - if ((phy->req_line_speed == SPEED_100) && - (phy->supported & - (SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full))) { - autoneg_val |= (1<<13); - /* Enabled AUTO-MDIX when autoneg is disabled */ - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL, - (1<<15 | 1<<9 | 7<<0)); - DP(NETIF_MSG_LINK, "Setting 100M force\n"); - } - if ((phy->req_line_speed == SPEED_10) && - (phy->supported & - (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full))) { - /* Enabled AUTO-MDIX when autoneg is disabled */ - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL, - (1<<15 | 1<<9 | 7<<0)); - DP(NETIF_MSG_LINK, "Setting 10M force\n"); - } - - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_8481_LEGACY_AN_ADV, - an_10_100_val); - - if (phy->req_duplex == DUPLEX_FULL) - autoneg_val |= (1<<8); - - /* - * Always write this if this is not 84833. - * For 84833, write it only when it's a forced speed. - */ - if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) || - ((autoneg_val & (1<<12)) == 0)) - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_MII_CTRL, autoneg_val); - - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || - (phy->req_line_speed == SPEED_10000)) { - DP(NETIF_MSG_LINK, "Advertising 10G\n"); - /* Restart autoneg for 10G*/ - - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, - 0x3200); - } else - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_10GBASE_T_AN_CTRL, - 1); - - /* Save spirom version */ - bnx2x_save_848xx_spirom_version(phy, params); - - phy->req_line_speed = tmp_req_line_speed; - - return 0; -} - -static int bnx2x_8481_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); - - /* HW reset */ - bnx2x_ext_phy_hw_reset(bp, params->port); - bnx2x_wait_reset_complete(bp, phy, params); - - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); - return bnx2x_848xx_cmn_config_init(phy, params, vars); -} - - -#define PHY84833_HDSHK_WAIT 300 -static int bnx2x_84833_pair_swap_cfg(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - u32 idx; - u32 pair_swap; - u16 val; - u16 data; - struct bnx2x *bp = params->bp; - /* Do pair swap */ - - /* Check for configuration. */ - pair_swap = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[params->port].xgbt_phy_cfg)) & - PORT_HW_CFG_RJ45_PAIR_SWAP_MASK; - - if (pair_swap == 0) - return 0; - - data = (u16)pair_swap; - - /* Write CMD_OPEN_OVERRIDE to STATUS reg */ - bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_SCRATCH_REG2, - PHY84833_CMD_OPEN_OVERRIDE); - for (idx = 0; idx < PHY84833_HDSHK_WAIT; idx++) { - bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_SCRATCH_REG2, &val); - if (val == PHY84833_CMD_OPEN_FOR_CMDS) - break; - msleep(1); - } - if (idx >= PHY84833_HDSHK_WAIT) { - DP(NETIF_MSG_LINK, "Pairswap: FW not ready.\n"); - return -EINVAL; - } - - bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_SCRATCH_REG4, - data); - /* Issue pair swap command */ - bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_SCRATCH_REG0, - PHY84833_DIAG_CMD_PAIR_SWAP_CHANGE); - for (idx = 0; idx < PHY84833_HDSHK_WAIT; idx++) { - bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_SCRATCH_REG2, &val); - if ((val == PHY84833_CMD_COMPLETE_PASS) || - (val == PHY84833_CMD_COMPLETE_ERROR)) - break; - msleep(1); - } - if ((idx >= PHY84833_HDSHK_WAIT) || - (val == PHY84833_CMD_COMPLETE_ERROR)) { - DP(NETIF_MSG_LINK, "Pairswap: override failed.\n"); - return -EINVAL; - } - bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_SCRATCH_REG2, - PHY84833_CMD_CLEAR_COMPLETE); - DP(NETIF_MSG_LINK, "Pairswap OK, val=0x%x\n", data); - return 0; -} - - -static u8 bnx2x_84833_get_reset_gpios(struct bnx2x *bp, - u32 shmem_base_path[], - u32 chip_id) -{ - u32 reset_pin[2]; - u32 idx; - u8 reset_gpios; - if (CHIP_IS_E3(bp)) { - /* Assume that these will be GPIOs, not EPIOs. */ - for (idx = 0; idx < 2; idx++) { - /* Map config param to register bit. */ - reset_pin[idx] = REG_RD(bp, shmem_base_path[idx] + - offsetof(struct shmem_region, - dev_info.port_hw_config[0].e3_cmn_pin_cfg)); - reset_pin[idx] = (reset_pin[idx] & - PORT_HW_CFG_E3_PHY_RESET_MASK) >> - PORT_HW_CFG_E3_PHY_RESET_SHIFT; - reset_pin[idx] -= PIN_CFG_GPIO0_P0; - reset_pin[idx] = (1 << reset_pin[idx]); - } - reset_gpios = (u8)(reset_pin[0] | reset_pin[1]); - } else { - /* E2, look from diff place of shmem. */ - for (idx = 0; idx < 2; idx++) { - reset_pin[idx] = REG_RD(bp, shmem_base_path[idx] + - offsetof(struct shmem_region, - dev_info.port_hw_config[0].default_cfg)); - reset_pin[idx] &= PORT_HW_CFG_EXT_PHY_GPIO_RST_MASK; - reset_pin[idx] -= PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0; - reset_pin[idx] >>= PORT_HW_CFG_EXT_PHY_GPIO_RST_SHIFT; - reset_pin[idx] = (1 << reset_pin[idx]); - } - reset_gpios = (u8)(reset_pin[0] | reset_pin[1]); - } - - return reset_gpios; -} - -static int bnx2x_84833_hw_reset_phy(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 reset_gpios; - u32 other_shmem_base_addr = REG_RD(bp, params->shmem2_base + - offsetof(struct shmem2_region, - other_shmem_base_addr)); - - u32 shmem_base_path[2]; - shmem_base_path[0] = params->shmem_base; - shmem_base_path[1] = other_shmem_base_addr; - - reset_gpios = bnx2x_84833_get_reset_gpios(bp, shmem_base_path, - params->chip_id); - - bnx2x_set_mult_gpio(bp, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_LOW); - udelay(10); - DP(NETIF_MSG_LINK, "84833 hw reset on pin values 0x%x\n", - reset_gpios); - - return 0; -} - -static int bnx2x_84833_common_init_phy(struct bnx2x *bp, - u32 shmem_base_path[], - u32 chip_id) -{ - u8 reset_gpios; - - reset_gpios = bnx2x_84833_get_reset_gpios(bp, shmem_base_path, chip_id); - - bnx2x_set_mult_gpio(bp, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_LOW); - udelay(10); - bnx2x_set_mult_gpio(bp, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_HIGH); - msleep(800); - DP(NETIF_MSG_LINK, "84833 reset pulse on pin values 0x%x\n", - reset_gpios); - - return 0; -} - -#define PHY84833_CONSTANT_LATENCY 1193 -static int bnx2x_848x3_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 port, initialize = 1; - u16 val; - u16 temp; - u32 actual_phy_selection, cms_enable, idx; - int rc = 0; - - msleep(1); - - if (!(CHIP_IS_E1(bp))) - port = BP_PATH(bp); - else - port = params->port; - - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) { - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, - port); - } else { - /* MDIO reset */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, 0x8000); - /* Bring PHY out of super isolate mode */ - bnx2x_cl45_read(bp, phy, - MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val); - val &= ~MDIO_84833_SUPER_ISOLATE; - bnx2x_cl45_write(bp, phy, - MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_XGPHY_STRAP1, val); - } - - bnx2x_wait_reset_complete(bp, phy, params); - - /* Wait for GPHY to come out of reset */ - msleep(50); - - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) - bnx2x_84833_pair_swap_cfg(phy, params, vars); - - /* - * BCM84823 requires that XGXS links up first @ 10G for normal behavior - */ - temp = vars->line_speed; - vars->line_speed = SPEED_10000; - bnx2x_set_autoneg(¶ms->phy[INT_PHY], params, vars, 0); - bnx2x_program_serdes(¶ms->phy[INT_PHY], params, vars); - vars->line_speed = temp; - - /* Set dual-media configuration according to configuration */ - - bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, - MDIO_CTL_REG_84823_MEDIA, &val); - val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK | - MDIO_CTL_REG_84823_MEDIA_LINE_MASK | - MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN | - MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK | - MDIO_CTL_REG_84823_MEDIA_FIBER_1G); - - if (CHIP_IS_E3(bp)) { - val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK | - MDIO_CTL_REG_84823_MEDIA_LINE_MASK); - } else { - val |= (MDIO_CTL_REG_84823_CTRL_MAC_XFI | - MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L); - } - - actual_phy_selection = bnx2x_phy_selection(params); - - switch (actual_phy_selection) { - case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT: - /* Do nothing. Essentially this is like the priority copper */ - break; - case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY: - val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER; - break; - case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY: - val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER; - break; - case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY: - /* Do nothing here. The first PHY won't be initialized at all */ - break; - case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY: - val |= MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN; - initialize = 0; - break; - } - if (params->phy[EXT_PHY2].req_line_speed == SPEED_1000) - val |= MDIO_CTL_REG_84823_MEDIA_FIBER_1G; - - bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, - MDIO_CTL_REG_84823_MEDIA, val); - DP(NETIF_MSG_LINK, "Multi_phy config = 0x%x, Media control = 0x%x\n", - params->multi_phy_config, val); - - /* AutogrEEEn */ - if (params->feature_config_flags & - FEATURE_CONFIG_AUTOGREEEN_ENABLED) { - /* Ensure that f/w is ready */ - for (idx = 0; idx < PHY84833_HDSHK_WAIT; idx++) { - bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_SCRATCH_REG2, &val); - if (val == PHY84833_CMD_OPEN_FOR_CMDS) - break; - usleep_range(1000, 1000); - } - if (idx >= PHY84833_HDSHK_WAIT) { - DP(NETIF_MSG_LINK, "AutogrEEEn: FW not ready.\n"); - return -EINVAL; - } - - /* Select EEE mode */ - bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_SCRATCH_REG3, - 0x2); - - /* Set Idle and Latency */ - bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_SCRATCH_REG4, - PHY84833_CONSTANT_LATENCY + 1); - - bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_DATA3_REG, - PHY84833_CONSTANT_LATENCY + 1); - - bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_DATA4_REG, - PHY84833_CONSTANT_LATENCY); - - /* Send EEE instruction to command register */ - bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_SCRATCH_REG0, - PHY84833_DIAG_CMD_SET_EEE_MODE); - - /* Ensure that the command has completed */ - for (idx = 0; idx < PHY84833_HDSHK_WAIT; idx++) { - bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_SCRATCH_REG2, &val); - if ((val == PHY84833_CMD_COMPLETE_PASS) || - (val == PHY84833_CMD_COMPLETE_ERROR)) - break; - usleep_range(1000, 1000); - } - if ((idx >= PHY84833_HDSHK_WAIT) || - (val == PHY84833_CMD_COMPLETE_ERROR)) { - DP(NETIF_MSG_LINK, "AutogrEEEn: command failed.\n"); - return -EINVAL; - } - - /* Reset command handler */ - bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_SCRATCH_REG2, - PHY84833_CMD_CLEAR_COMPLETE); - } - - if (initialize) - rc = bnx2x_848xx_cmn_config_init(phy, params, vars); - else - bnx2x_save_848xx_spirom_version(phy, params); - /* 84833 PHY has a better feature and doesn't need to support this. */ - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) { - cms_enable = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[params->port].default_cfg)) & - PORT_HW_CFG_ENABLE_CMS_MASK; - - bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, - MDIO_CTL_REG_84823_USER_CTRL_REG, &val); - if (cms_enable) - val |= MDIO_CTL_REG_84823_USER_CTRL_CMS; - else - val &= ~MDIO_CTL_REG_84823_USER_CTRL_CMS; - bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, - MDIO_CTL_REG_84823_USER_CTRL_REG, val); - } - - return rc; -} - -static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 val, val1, val2; - u8 link_up = 0; - - - /* Check 10G-BaseT link status */ - /* Check PMD signal ok */ - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, 0xFFFA, &val1); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL, - &val2); - DP(NETIF_MSG_LINK, "BCM848xx: PMD_SIGNAL 1.a811 = 0x%x\n", val2); - - /* Check link 10G */ - if (val2 & (1<<11)) { - vars->line_speed = SPEED_10000; - vars->duplex = DUPLEX_FULL; - link_up = 1; - bnx2x_ext_phy_10G_an_resolve(bp, phy, vars); - } else { /* Check Legacy speed link */ - u16 legacy_status, legacy_speed; - - /* Enable expansion register 0x42 (Operation mode status) */ - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_EXPANSION_REG_ACCESS, 0xf42); - - /* Get legacy speed operation status */ - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, - &legacy_status); - - DP(NETIF_MSG_LINK, "Legacy speed status" - " = 0x%x\n", legacy_status); - link_up = ((legacy_status & (1<<11)) == (1<<11)); - if (link_up) { - legacy_speed = (legacy_status & (3<<9)); - if (legacy_speed == (0<<9)) - vars->line_speed = SPEED_10; - else if (legacy_speed == (1<<9)) - vars->line_speed = SPEED_100; - else if (legacy_speed == (2<<9)) - vars->line_speed = SPEED_1000; - else /* Should not happen */ - vars->line_speed = 0; - - if (legacy_status & (1<<8)) - vars->duplex = DUPLEX_FULL; - else - vars->duplex = DUPLEX_HALF; - - DP(NETIF_MSG_LINK, "Link is up in %dMbps," - " is_duplex_full= %d\n", vars->line_speed, - (vars->duplex == DUPLEX_FULL)); - /* Check legacy speed AN resolution */ - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_MII_STATUS, - &val); - if (val & (1<<5)) - vars->link_status |= - LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_AN_EXPANSION, - &val); - if ((val & (1<<0)) == 0) - vars->link_status |= - LINK_STATUS_PARALLEL_DETECTION_USED; - } - } - if (link_up) { - DP(NETIF_MSG_LINK, "BCM84823: link speed is %d\n", - vars->line_speed); - bnx2x_ext_phy_resolve_fc(phy, params, vars); - } - - return link_up; -} - - -static int bnx2x_848xx_format_ver(u32 raw_ver, u8 *str, u16 *len) -{ - int status = 0; - u32 spirom_ver; - spirom_ver = ((raw_ver & 0xF80) >> 7) << 16 | (raw_ver & 0x7F); - status = bnx2x_format_ver(spirom_ver, str, len); - return status; -} - -static void bnx2x_8481_hw_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - bnx2x_set_gpio(params->bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW, 0); - bnx2x_set_gpio(params->bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW, 1); -} - -static void bnx2x_8481_link_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - bnx2x_cl45_write(params->bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x0000); - bnx2x_cl45_write(params->bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1); -} - -static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 port; - u16 val16; - - if (!(CHIP_IS_E1(bp))) - port = BP_PATH(bp); - else - port = params->port; - - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) { - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, - MISC_REGISTERS_GPIO_OUTPUT_LOW, - port); - } else { - bnx2x_cl45_read(bp, phy, - MDIO_CTL_DEVAD, - 0x400f, &val16); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, 0x800); - } -} - -static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, - struct link_params *params, u8 mode) -{ - struct bnx2x *bp = params->bp; - u16 val; - u8 port; - - if (!(CHIP_IS_E1(bp))) - port = BP_PATH(bp); - else - port = params->port; - - switch (mode) { - case LED_MODE_OFF: - - DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OFF\n", port); - - if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == - SHARED_HW_CFG_LED_EXTPHY1) { - - /* Set LED masks */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK, - 0x0); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED2_MASK, - 0x0); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED3_MASK, - 0x0); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED5_MASK, - 0x0); - - } else { - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK, - 0x0); - } - break; - case LED_MODE_FRONT_PANEL_OFF: - - DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE FRONT PANEL OFF\n", - port); - - if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == - SHARED_HW_CFG_LED_EXTPHY1) { - - /* Set LED masks */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK, - 0x0); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED2_MASK, - 0x0); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED3_MASK, - 0x0); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED5_MASK, - 0x20); - - } else { - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK, - 0x0); - } - break; - case LED_MODE_ON: - - DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE ON\n", port); - - if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == - SHARED_HW_CFG_LED_EXTPHY1) { - /* Set control reg */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, - &val); - val &= 0x8000; - val |= 0x2492; - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, - val); - - /* Set LED masks */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK, - 0x0); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED2_MASK, - 0x20); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED3_MASK, - 0x20); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED5_MASK, - 0x0); - } else { - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK, - 0x20); - } - break; - - case LED_MODE_OPER: - - DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OPER\n", port); - - if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == - SHARED_HW_CFG_LED_EXTPHY1) { - - /* Set control reg */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, - &val); - - if (!((val & - MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK) - >> MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT)) { - DP(NETIF_MSG_LINK, "Setting LINK_SIGNAL\n"); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, - 0xa492); - } - - /* Set LED masks */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK, - 0x10); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED2_MASK, - 0x80); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED3_MASK, - 0x98); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED5_MASK, - 0x40); - - } else { - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK, - 0x80); - - /* Tell LED3 to blink on source */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, - &val); - val &= ~(7<<6); - val |= (1<<6); /* A83B[8:6]= 1 */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, - val); - } - break; - } - - /* - * This is a workaround for E3+84833 until autoneg - * restart is fixed in f/w - */ - if (CHIP_IS_E3(bp)) { - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_GP2_STATUS_GP_2_1, &val); - } -} - -/******************************************************************/ -/* 54618SE PHY SECTION */ -/******************************************************************/ -static int bnx2x_54618se_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 port; - u16 autoneg_val, an_1000_val, an_10_100_val, fc_val, temp; - u32 cfg_pin; - - DP(NETIF_MSG_LINK, "54618SE cfg init\n"); - usleep_range(1000, 1000); - - /* This works with E3 only, no need to check the chip - before determining the port. */ - port = params->port; - - cfg_pin = (REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].e3_cmn_pin_cfg)) & - PORT_HW_CFG_E3_PHY_RESET_MASK) >> - PORT_HW_CFG_E3_PHY_RESET_SHIFT; - - /* Drive pin high to bring the GPHY out of reset. */ - bnx2x_set_cfg_pin(bp, cfg_pin, 1); - - /* wait for GPHY to reset */ - msleep(50); - - /* reset phy */ - bnx2x_cl22_write(bp, phy, - MDIO_PMA_REG_CTRL, 0x8000); - bnx2x_wait_reset_complete(bp, phy, params); - - /*wait for GPHY to reset */ - msleep(50); - - /* Configure LED4: set to INTR (0x6). */ - /* Accessing shadow register 0xe. */ - bnx2x_cl22_write(bp, phy, - MDIO_REG_GPHY_SHADOW, - MDIO_REG_GPHY_SHADOW_LED_SEL2); - bnx2x_cl22_read(bp, phy, - MDIO_REG_GPHY_SHADOW, - &temp); - temp &= ~(0xf << 4); - temp |= (0x6 << 4); - bnx2x_cl22_write(bp, phy, - MDIO_REG_GPHY_SHADOW, - MDIO_REG_GPHY_SHADOW_WR_ENA | temp); - /* Configure INTR based on link status change. */ - bnx2x_cl22_write(bp, phy, - MDIO_REG_INTR_MASK, - ~MDIO_REG_INTR_MASK_LINK_STATUS); - - /* Flip the signal detect polarity (set 0x1c.0x1e[8]). */ - bnx2x_cl22_write(bp, phy, - MDIO_REG_GPHY_SHADOW, - MDIO_REG_GPHY_SHADOW_AUTO_DET_MED); - bnx2x_cl22_read(bp, phy, - MDIO_REG_GPHY_SHADOW, - &temp); - temp |= MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD; - bnx2x_cl22_write(bp, phy, - MDIO_REG_GPHY_SHADOW, - MDIO_REG_GPHY_SHADOW_WR_ENA | temp); - - /* Set up fc */ - /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ - bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); - fc_val = 0; - if ((vars->ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) - fc_val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC; - - if ((vars->ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) - fc_val |= MDIO_AN_REG_ADV_PAUSE_PAUSE; - - /* read all advertisement */ - bnx2x_cl22_read(bp, phy, - 0x09, - &an_1000_val); - - bnx2x_cl22_read(bp, phy, - 0x04, - &an_10_100_val); - - bnx2x_cl22_read(bp, phy, - MDIO_PMA_REG_CTRL, - &autoneg_val); - - /* Disable forced speed */ - autoneg_val &= ~((1<<6) | (1<<8) | (1<<9) | (1<<12) | (1<<13)); - an_10_100_val &= ~((1<<5) | (1<<6) | (1<<7) | (1<<8) | (1<<10) | - (1<<11)); - - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || - (phy->req_line_speed == SPEED_1000)) { - an_1000_val |= (1<<8); - autoneg_val |= (1<<9 | 1<<12); - if (phy->req_duplex == DUPLEX_FULL) - an_1000_val |= (1<<9); - DP(NETIF_MSG_LINK, "Advertising 1G\n"); - } else - an_1000_val &= ~((1<<8) | (1<<9)); - - bnx2x_cl22_write(bp, phy, - 0x09, - an_1000_val); - bnx2x_cl22_read(bp, phy, - 0x09, - &an_1000_val); - - /* set 100 speed advertisement */ - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)))) { - an_10_100_val |= (1<<7); - /* Enable autoneg and restart autoneg for legacy speeds */ - autoneg_val |= (1<<9 | 1<<12); - - if (phy->req_duplex == DUPLEX_FULL) - an_10_100_val |= (1<<8); - DP(NETIF_MSG_LINK, "Advertising 100M\n"); - } - - /* set 10 speed advertisement */ - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)))) { - an_10_100_val |= (1<<5); - autoneg_val |= (1<<9 | 1<<12); - if (phy->req_duplex == DUPLEX_FULL) - an_10_100_val |= (1<<6); - DP(NETIF_MSG_LINK, "Advertising 10M\n"); - } - - /* Only 10/100 are allowed to work in FORCE mode */ - if (phy->req_line_speed == SPEED_100) { - autoneg_val |= (1<<13); - /* Enabled AUTO-MDIX when autoneg is disabled */ - bnx2x_cl22_write(bp, phy, - 0x18, - (1<<15 | 1<<9 | 7<<0)); - DP(NETIF_MSG_LINK, "Setting 100M force\n"); - } - if (phy->req_line_speed == SPEED_10) { - /* Enabled AUTO-MDIX when autoneg is disabled */ - bnx2x_cl22_write(bp, phy, - 0x18, - (1<<15 | 1<<9 | 7<<0)); - DP(NETIF_MSG_LINK, "Setting 10M force\n"); - } - - /* Check if we should turn on Auto-GrEEEn */ - bnx2x_cl22_read(bp, phy, MDIO_REG_GPHY_PHYID_LSB, &temp); - if (temp == MDIO_REG_GPHY_ID_54618SE) { - if (params->feature_config_flags & - FEATURE_CONFIG_AUTOGREEEN_ENABLED) { - temp = 6; - DP(NETIF_MSG_LINK, "Enabling Auto-GrEEEn\n"); - } else { - temp = 0; - DP(NETIF_MSG_LINK, "Disabling Auto-GrEEEn\n"); - } - bnx2x_cl22_write(bp, phy, - MDIO_REG_GPHY_CL45_ADDR_REG, MDIO_AN_DEVAD); - bnx2x_cl22_write(bp, phy, - MDIO_REG_GPHY_CL45_DATA_REG, - MDIO_REG_GPHY_EEE_ADV); - bnx2x_cl22_write(bp, phy, - MDIO_REG_GPHY_CL45_ADDR_REG, - (0x1 << 14) | MDIO_AN_DEVAD); - bnx2x_cl22_write(bp, phy, - MDIO_REG_GPHY_CL45_DATA_REG, - temp); - } - - bnx2x_cl22_write(bp, phy, - 0x04, - an_10_100_val | fc_val); - - if (phy->req_duplex == DUPLEX_FULL) - autoneg_val |= (1<<8); - - bnx2x_cl22_write(bp, phy, - MDIO_PMA_REG_CTRL, autoneg_val); - - return 0; -} - -static void bnx2x_54618se_set_link_led(struct bnx2x_phy *phy, - struct link_params *params, u8 mode) -{ - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "54618SE set link led (mode=%x)\n", mode); - switch (mode) { - case LED_MODE_FRONT_PANEL_OFF: - case LED_MODE_OFF: - case LED_MODE_OPER: - case LED_MODE_ON: - default: - break; - } - return; -} - -static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u32 cfg_pin; - u8 port; - - /* - * In case of no EPIO routed to reset the GPHY, put it - * in low power mode. - */ - bnx2x_cl22_write(bp, phy, MDIO_PMA_REG_CTRL, 0x800); - /* - * This works with E3 only, no need to check the chip - * before determining the port. - */ - port = params->port; - cfg_pin = (REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].e3_cmn_pin_cfg)) & - PORT_HW_CFG_E3_PHY_RESET_MASK) >> - PORT_HW_CFG_E3_PHY_RESET_SHIFT; - - /* Drive pin low to put GPHY in reset. */ - bnx2x_set_cfg_pin(bp, cfg_pin, 0); -} - -static u8 bnx2x_54618se_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 val; - u8 link_up = 0; - u16 legacy_status, legacy_speed; - - /* Get speed operation status */ - bnx2x_cl22_read(bp, phy, - 0x19, - &legacy_status); - DP(NETIF_MSG_LINK, "54618SE read_status: 0x%x\n", legacy_status); - - /* Read status to clear the PHY interrupt. */ - bnx2x_cl22_read(bp, phy, - MDIO_REG_INTR_STATUS, - &val); - - link_up = ((legacy_status & (1<<2)) == (1<<2)); - - if (link_up) { - legacy_speed = (legacy_status & (7<<8)); - if (legacy_speed == (7<<8)) { - vars->line_speed = SPEED_1000; - vars->duplex = DUPLEX_FULL; - } else if (legacy_speed == (6<<8)) { - vars->line_speed = SPEED_1000; - vars->duplex = DUPLEX_HALF; - } else if (legacy_speed == (5<<8)) { - vars->line_speed = SPEED_100; - vars->duplex = DUPLEX_FULL; - } - /* Omitting 100Base-T4 for now */ - else if (legacy_speed == (3<<8)) { - vars->line_speed = SPEED_100; - vars->duplex = DUPLEX_HALF; - } else if (legacy_speed == (2<<8)) { - vars->line_speed = SPEED_10; - vars->duplex = DUPLEX_FULL; - } else if (legacy_speed == (1<<8)) { - vars->line_speed = SPEED_10; - vars->duplex = DUPLEX_HALF; - } else /* Should not happen */ - vars->line_speed = 0; - - DP(NETIF_MSG_LINK, "Link is up in %dMbps," - " is_duplex_full= %d\n", vars->line_speed, - (vars->duplex == DUPLEX_FULL)); - - /* Check legacy speed AN resolution */ - bnx2x_cl22_read(bp, phy, - 0x01, - &val); - if (val & (1<<5)) - vars->link_status |= - LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; - bnx2x_cl22_read(bp, phy, - 0x06, - &val); - if ((val & (1<<0)) == 0) - vars->link_status |= - LINK_STATUS_PARALLEL_DETECTION_USED; - - DP(NETIF_MSG_LINK, "BCM54618SE: link speed is %d\n", - vars->line_speed); - - /* Report whether EEE is resolved. */ - bnx2x_cl22_read(bp, phy, MDIO_REG_GPHY_PHYID_LSB, &val); - if (val == MDIO_REG_GPHY_ID_54618SE) { - if (vars->link_status & - LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) - val = 0; - else { - bnx2x_cl22_write(bp, phy, - MDIO_REG_GPHY_CL45_ADDR_REG, - MDIO_AN_DEVAD); - bnx2x_cl22_write(bp, phy, - MDIO_REG_GPHY_CL45_DATA_REG, - MDIO_REG_GPHY_EEE_RESOLVED); - bnx2x_cl22_write(bp, phy, - MDIO_REG_GPHY_CL45_ADDR_REG, - (0x1 << 14) | MDIO_AN_DEVAD); - bnx2x_cl22_read(bp, phy, - MDIO_REG_GPHY_CL45_DATA_REG, - &val); - } - DP(NETIF_MSG_LINK, "EEE resolution: 0x%x\n", val); - } - - bnx2x_ext_phy_resolve_fc(phy, params, vars); - } - return link_up; -} - -static void bnx2x_54618se_config_loopback(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 val; - u32 umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; - - DP(NETIF_MSG_LINK, "2PMA/PMD ext_phy_loopback: 54618se\n"); - - /* Enable master/slave manual mmode and set to master */ - /* mii write 9 [bits set 11 12] */ - bnx2x_cl22_write(bp, phy, 0x09, 3<<11); - - /* forced 1G and disable autoneg */ - /* set val [mii read 0] */ - /* set val [expr $val & [bits clear 6 12 13]] */ - /* set val [expr $val | [bits set 6 8]] */ - /* mii write 0 $val */ - bnx2x_cl22_read(bp, phy, 0x00, &val); - val &= ~((1<<6) | (1<<12) | (1<<13)); - val |= (1<<6) | (1<<8); - bnx2x_cl22_write(bp, phy, 0x00, val); - - /* Set external loopback and Tx using 6dB coding */ - /* mii write 0x18 7 */ - /* set val [mii read 0x18] */ - /* mii write 0x18 [expr $val | [bits set 10 15]] */ - bnx2x_cl22_write(bp, phy, 0x18, 7); - bnx2x_cl22_read(bp, phy, 0x18, &val); - bnx2x_cl22_write(bp, phy, 0x18, val | (1<<10) | (1<<15)); - - /* This register opens the gate for the UMAC despite its name */ - REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 1); - - /* - * Maximum Frame Length (RW). Defines a 14-Bit maximum frame - * length used by the MAC receive logic to check frames. - */ - REG_WR(bp, umac_base + UMAC_REG_MAXFR, 0x2710); -} - -/******************************************************************/ -/* SFX7101 PHY SECTION */ -/******************************************************************/ -static void bnx2x_7101_config_loopback(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - /* SFX7101_XGXS_TEST1 */ - bnx2x_cl45_write(bp, phy, - MDIO_XS_DEVAD, MDIO_XS_SFX7101_XGXS_TEST1, 0x100); -} - -static int bnx2x_7101_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - u16 fw_ver1, fw_ver2, val; - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "Setting the SFX7101 LASI indication\n"); - - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); - /* HW reset */ - bnx2x_ext_phy_hw_reset(bp, params->port); - bnx2x_wait_reset_complete(bp, phy, params); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x1); - DP(NETIF_MSG_LINK, "Setting the SFX7101 LED to blink on traffic\n"); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_7107_LED_CNTL, (1<<3)); - - bnx2x_ext_phy_set_pause(params, phy, vars); - /* Restart autoneg */ - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, &val); - val |= 0x200; - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, val); - - /* Save spirom version */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_7101_VER1, &fw_ver1); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_7101_VER2, &fw_ver2); - bnx2x_save_spirom_version(bp, params->port, - (u32)(fw_ver1<<16 | fw_ver2), phy->ver_addr); - return 0; -} - -static u8 bnx2x_7101_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 link_up; - u16 val1, val2; - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); - DP(NETIF_MSG_LINK, "10G-base-T LASI status 0x%x->0x%x\n", - val2, val1); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); - DP(NETIF_MSG_LINK, "10G-base-T PMA status 0x%x->0x%x\n", - val2, val1); - link_up = ((val1 & 4) == 4); - /* if link is up print the AN outcome of the SFX7101 PHY */ - if (link_up) { - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_MASTER_STATUS, - &val2); - vars->line_speed = SPEED_10000; - vars->duplex = DUPLEX_FULL; - DP(NETIF_MSG_LINK, "SFX7101 AN status 0x%x->Master=%x\n", - val2, (val2 & (1<<14))); - bnx2x_ext_phy_10G_an_resolve(bp, phy, vars); - bnx2x_ext_phy_resolve_fc(phy, params, vars); - } - return link_up; -} - -static int bnx2x_7101_format_ver(u32 spirom_ver, u8 *str, u16 *len) -{ - if (*len < 5) - return -EINVAL; - str[0] = (spirom_ver & 0xFF); - str[1] = (spirom_ver & 0xFF00) >> 8; - str[2] = (spirom_ver & 0xFF0000) >> 16; - str[3] = (spirom_ver & 0xFF000000) >> 24; - str[4] = '\0'; - *len -= 5; - return 0; -} - -void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy) -{ - u16 val, cnt; - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_7101_RESET, &val); - - for (cnt = 0; cnt < 10; cnt++) { - msleep(50); - /* Writes a self-clearing reset */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_7101_RESET, - (val | (1<<15))); - /* Wait for clear */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_7101_RESET, &val); - - if ((val & (1<<15)) == 0) - break; - } -} - -static void bnx2x_7101_hw_reset(struct bnx2x_phy *phy, - struct link_params *params) { - /* Low power mode is controlled by GPIO 2 */ - bnx2x_set_gpio(params->bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_LOW, params->port); - /* The PHY reset is controlled by GPIO 1 */ - bnx2x_set_gpio(params->bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW, params->port); -} - -static void bnx2x_7101_set_link_led(struct bnx2x_phy *phy, - struct link_params *params, u8 mode) -{ - u16 val = 0; - struct bnx2x *bp = params->bp; - switch (mode) { - case LED_MODE_FRONT_PANEL_OFF: - case LED_MODE_OFF: - val = 2; - break; - case LED_MODE_ON: - val = 1; - break; - case LED_MODE_OPER: - val = 0; - break; - } - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_7107_LINK_LED_CNTL, - val); -} - -/******************************************************************/ -/* STATIC PHY DECLARATION */ -/******************************************************************/ - -static struct bnx2x_phy phy_null = { - .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN, - .addr = 0, - .def_md_devad = 0, - .flags = FLAGS_INIT_XGXS_FIRST, - .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .mdio_ctrl = 0, - .supported = 0, - .media_type = ETH_PHY_NOT_PRESENT, - .ver_addr = 0, - .req_flow_ctrl = 0, - .req_line_speed = 0, - .speed_cap_mask = 0, - .req_duplex = 0, - .rsrv = 0, - .config_init = (config_init_t)NULL, - .read_status = (read_status_t)NULL, - .link_reset = (link_reset_t)NULL, - .config_loopback = (config_loopback_t)NULL, - .format_fw_ver = (format_fw_ver_t)NULL, - .hw_reset = (hw_reset_t)NULL, - .set_link_led = (set_link_led_t)NULL, - .phy_specific_func = (phy_specific_func_t)NULL -}; - -static struct bnx2x_phy phy_serdes = { - .type = PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT, - .addr = 0xff, - .def_md_devad = 0, - .flags = 0, - .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .mdio_ctrl = 0, - .supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_2500baseX_Full | - SUPPORTED_TP | - SUPPORTED_Autoneg | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_BASE_T, - .ver_addr = 0, - .req_flow_ctrl = 0, - .req_line_speed = 0, - .speed_cap_mask = 0, - .req_duplex = 0, - .rsrv = 0, - .config_init = (config_init_t)bnx2x_xgxs_config_init, - .read_status = (read_status_t)bnx2x_link_settings_status, - .link_reset = (link_reset_t)bnx2x_int_link_reset, - .config_loopback = (config_loopback_t)NULL, - .format_fw_ver = (format_fw_ver_t)NULL, - .hw_reset = (hw_reset_t)NULL, - .set_link_led = (set_link_led_t)NULL, - .phy_specific_func = (phy_specific_func_t)NULL -}; - -static struct bnx2x_phy phy_xgxs = { - .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, - .addr = 0xff, - .def_md_devad = 0, - .flags = 0, - .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .mdio_ctrl = 0, - .supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_2500baseX_Full | - SUPPORTED_10000baseT_Full | - SUPPORTED_FIBRE | - SUPPORTED_Autoneg | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_CX4, - .ver_addr = 0, - .req_flow_ctrl = 0, - .req_line_speed = 0, - .speed_cap_mask = 0, - .req_duplex = 0, - .rsrv = 0, - .config_init = (config_init_t)bnx2x_xgxs_config_init, - .read_status = (read_status_t)bnx2x_link_settings_status, - .link_reset = (link_reset_t)bnx2x_int_link_reset, - .config_loopback = (config_loopback_t)bnx2x_set_xgxs_loopback, - .format_fw_ver = (format_fw_ver_t)NULL, - .hw_reset = (hw_reset_t)NULL, - .set_link_led = (set_link_led_t)NULL, - .phy_specific_func = (phy_specific_func_t)NULL -}; -static struct bnx2x_phy phy_warpcore = { - .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, - .addr = 0xff, - .def_md_devad = 0, - .flags = (FLAGS_HW_LOCK_REQUIRED | - FLAGS_TX_ERROR_CHECK), - .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .mdio_ctrl = 0, - .supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_10000baseT_Full | - SUPPORTED_20000baseKR2_Full | - SUPPORTED_20000baseMLD2_Full | - SUPPORTED_FIBRE | - SUPPORTED_Autoneg | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_UNSPECIFIED, - .ver_addr = 0, - .req_flow_ctrl = 0, - .req_line_speed = 0, - .speed_cap_mask = 0, - /* req_duplex = */0, - /* rsrv = */0, - .config_init = (config_init_t)bnx2x_warpcore_config_init, - .read_status = (read_status_t)bnx2x_warpcore_read_status, - .link_reset = (link_reset_t)bnx2x_warpcore_link_reset, - .config_loopback = (config_loopback_t)bnx2x_set_warpcore_loopback, - .format_fw_ver = (format_fw_ver_t)NULL, - .hw_reset = (hw_reset_t)bnx2x_warpcore_hw_reset, - .set_link_led = (set_link_led_t)NULL, - .phy_specific_func = (phy_specific_func_t)NULL -}; - - -static struct bnx2x_phy phy_7101 = { - .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101, - .addr = 0xff, - .def_md_devad = 0, - .flags = FLAGS_FAN_FAILURE_DET_REQ, - .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .mdio_ctrl = 0, - .supported = (SUPPORTED_10000baseT_Full | - SUPPORTED_TP | - SUPPORTED_Autoneg | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_BASE_T, - .ver_addr = 0, - .req_flow_ctrl = 0, - .req_line_speed = 0, - .speed_cap_mask = 0, - .req_duplex = 0, - .rsrv = 0, - .config_init = (config_init_t)bnx2x_7101_config_init, - .read_status = (read_status_t)bnx2x_7101_read_status, - .link_reset = (link_reset_t)bnx2x_common_ext_link_reset, - .config_loopback = (config_loopback_t)bnx2x_7101_config_loopback, - .format_fw_ver = (format_fw_ver_t)bnx2x_7101_format_ver, - .hw_reset = (hw_reset_t)bnx2x_7101_hw_reset, - .set_link_led = (set_link_led_t)bnx2x_7101_set_link_led, - .phy_specific_func = (phy_specific_func_t)NULL -}; -static struct bnx2x_phy phy_8073 = { - .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - .addr = 0xff, - .def_md_devad = 0, - .flags = FLAGS_HW_LOCK_REQUIRED, - .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .mdio_ctrl = 0, - .supported = (SUPPORTED_10000baseT_Full | - SUPPORTED_2500baseX_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE | - SUPPORTED_Autoneg | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_KR, - .ver_addr = 0, - .req_flow_ctrl = 0, - .req_line_speed = 0, - .speed_cap_mask = 0, - .req_duplex = 0, - .rsrv = 0, - .config_init = (config_init_t)bnx2x_8073_config_init, - .read_status = (read_status_t)bnx2x_8073_read_status, - .link_reset = (link_reset_t)bnx2x_8073_link_reset, - .config_loopback = (config_loopback_t)NULL, - .format_fw_ver = (format_fw_ver_t)bnx2x_format_ver, - .hw_reset = (hw_reset_t)NULL, - .set_link_led = (set_link_led_t)NULL, - .phy_specific_func = (phy_specific_func_t)NULL -}; -static struct bnx2x_phy phy_8705 = { - .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705, - .addr = 0xff, - .def_md_devad = 0, - .flags = FLAGS_INIT_XGXS_FIRST, - .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .mdio_ctrl = 0, - .supported = (SUPPORTED_10000baseT_Full | - SUPPORTED_FIBRE | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_XFP_FIBER, - .ver_addr = 0, - .req_flow_ctrl = 0, - .req_line_speed = 0, - .speed_cap_mask = 0, - .req_duplex = 0, - .rsrv = 0, - .config_init = (config_init_t)bnx2x_8705_config_init, - .read_status = (read_status_t)bnx2x_8705_read_status, - .link_reset = (link_reset_t)bnx2x_common_ext_link_reset, - .config_loopback = (config_loopback_t)NULL, - .format_fw_ver = (format_fw_ver_t)bnx2x_null_format_ver, - .hw_reset = (hw_reset_t)NULL, - .set_link_led = (set_link_led_t)NULL, - .phy_specific_func = (phy_specific_func_t)NULL -}; -static struct bnx2x_phy phy_8706 = { - .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706, - .addr = 0xff, - .def_md_devad = 0, - .flags = (FLAGS_INIT_XGXS_FIRST | - FLAGS_TX_ERROR_CHECK), - .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .mdio_ctrl = 0, - .supported = (SUPPORTED_10000baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_SFP_FIBER, - .ver_addr = 0, - .req_flow_ctrl = 0, - .req_line_speed = 0, - .speed_cap_mask = 0, - .req_duplex = 0, - .rsrv = 0, - .config_init = (config_init_t)bnx2x_8706_config_init, - .read_status = (read_status_t)bnx2x_8706_read_status, - .link_reset = (link_reset_t)bnx2x_common_ext_link_reset, - .config_loopback = (config_loopback_t)NULL, - .format_fw_ver = (format_fw_ver_t)bnx2x_format_ver, - .hw_reset = (hw_reset_t)NULL, - .set_link_led = (set_link_led_t)NULL, - .phy_specific_func = (phy_specific_func_t)NULL -}; - -static struct bnx2x_phy phy_8726 = { - .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, - .addr = 0xff, - .def_md_devad = 0, - .flags = (FLAGS_HW_LOCK_REQUIRED | - FLAGS_INIT_XGXS_FIRST | - FLAGS_TX_ERROR_CHECK), - .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .mdio_ctrl = 0, - .supported = (SUPPORTED_10000baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_Autoneg | - SUPPORTED_FIBRE | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_NOT_PRESENT, - .ver_addr = 0, - .req_flow_ctrl = 0, - .req_line_speed = 0, - .speed_cap_mask = 0, - .req_duplex = 0, - .rsrv = 0, - .config_init = (config_init_t)bnx2x_8726_config_init, - .read_status = (read_status_t)bnx2x_8726_read_status, - .link_reset = (link_reset_t)bnx2x_8726_link_reset, - .config_loopback = (config_loopback_t)bnx2x_8726_config_loopback, - .format_fw_ver = (format_fw_ver_t)bnx2x_format_ver, - .hw_reset = (hw_reset_t)NULL, - .set_link_led = (set_link_led_t)NULL, - .phy_specific_func = (phy_specific_func_t)NULL -}; - -static struct bnx2x_phy phy_8727 = { - .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - .addr = 0xff, - .def_md_devad = 0, - .flags = (FLAGS_FAN_FAILURE_DET_REQ | - FLAGS_TX_ERROR_CHECK), - .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .mdio_ctrl = 0, - .supported = (SUPPORTED_10000baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_NOT_PRESENT, - .ver_addr = 0, - .req_flow_ctrl = 0, - .req_line_speed = 0, - .speed_cap_mask = 0, - .req_duplex = 0, - .rsrv = 0, - .config_init = (config_init_t)bnx2x_8727_config_init, - .read_status = (read_status_t)bnx2x_8727_read_status, - .link_reset = (link_reset_t)bnx2x_8727_link_reset, - .config_loopback = (config_loopback_t)NULL, - .format_fw_ver = (format_fw_ver_t)bnx2x_format_ver, - .hw_reset = (hw_reset_t)bnx2x_8727_hw_reset, - .set_link_led = (set_link_led_t)bnx2x_8727_set_link_led, - .phy_specific_func = (phy_specific_func_t)bnx2x_8727_specific_func -}; -static struct bnx2x_phy phy_8481 = { - .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - .addr = 0xff, - .def_md_devad = 0, - .flags = FLAGS_FAN_FAILURE_DET_REQ | - FLAGS_REARM_LATCH_SIGNAL, - .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .mdio_ctrl = 0, - .supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_10000baseT_Full | - SUPPORTED_TP | - SUPPORTED_Autoneg | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_BASE_T, - .ver_addr = 0, - .req_flow_ctrl = 0, - .req_line_speed = 0, - .speed_cap_mask = 0, - .req_duplex = 0, - .rsrv = 0, - .config_init = (config_init_t)bnx2x_8481_config_init, - .read_status = (read_status_t)bnx2x_848xx_read_status, - .link_reset = (link_reset_t)bnx2x_8481_link_reset, - .config_loopback = (config_loopback_t)NULL, - .format_fw_ver = (format_fw_ver_t)bnx2x_848xx_format_ver, - .hw_reset = (hw_reset_t)bnx2x_8481_hw_reset, - .set_link_led = (set_link_led_t)bnx2x_848xx_set_link_led, - .phy_specific_func = (phy_specific_func_t)NULL -}; - -static struct bnx2x_phy phy_84823 = { - .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823, - .addr = 0xff, - .def_md_devad = 0, - .flags = FLAGS_FAN_FAILURE_DET_REQ | - FLAGS_REARM_LATCH_SIGNAL, - .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .mdio_ctrl = 0, - .supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_10000baseT_Full | - SUPPORTED_TP | - SUPPORTED_Autoneg | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_BASE_T, - .ver_addr = 0, - .req_flow_ctrl = 0, - .req_line_speed = 0, - .speed_cap_mask = 0, - .req_duplex = 0, - .rsrv = 0, - .config_init = (config_init_t)bnx2x_848x3_config_init, - .read_status = (read_status_t)bnx2x_848xx_read_status, - .link_reset = (link_reset_t)bnx2x_848x3_link_reset, - .config_loopback = (config_loopback_t)NULL, - .format_fw_ver = (format_fw_ver_t)bnx2x_848xx_format_ver, - .hw_reset = (hw_reset_t)NULL, - .set_link_led = (set_link_led_t)bnx2x_848xx_set_link_led, - .phy_specific_func = (phy_specific_func_t)NULL -}; - -static struct bnx2x_phy phy_84833 = { - .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833, - .addr = 0xff, - .def_md_devad = 0, - .flags = FLAGS_FAN_FAILURE_DET_REQ | - FLAGS_REARM_LATCH_SIGNAL, - .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .mdio_ctrl = 0, - .supported = (SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_10000baseT_Full | - SUPPORTED_TP | - SUPPORTED_Autoneg | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_BASE_T, - .ver_addr = 0, - .req_flow_ctrl = 0, - .req_line_speed = 0, - .speed_cap_mask = 0, - .req_duplex = 0, - .rsrv = 0, - .config_init = (config_init_t)bnx2x_848x3_config_init, - .read_status = (read_status_t)bnx2x_848xx_read_status, - .link_reset = (link_reset_t)bnx2x_848x3_link_reset, - .config_loopback = (config_loopback_t)NULL, - .format_fw_ver = (format_fw_ver_t)bnx2x_848xx_format_ver, - .hw_reset = (hw_reset_t)bnx2x_84833_hw_reset_phy, - .set_link_led = (set_link_led_t)bnx2x_848xx_set_link_led, - .phy_specific_func = (phy_specific_func_t)NULL -}; - -static struct bnx2x_phy phy_54618se = { - .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE, - .addr = 0xff, - .def_md_devad = 0, - .flags = FLAGS_INIT_XGXS_FIRST, - .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, - .mdio_ctrl = 0, - .supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_TP | - SUPPORTED_Autoneg | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_BASE_T, - .ver_addr = 0, - .req_flow_ctrl = 0, - .req_line_speed = 0, - .speed_cap_mask = 0, - /* req_duplex = */0, - /* rsrv = */0, - .config_init = (config_init_t)bnx2x_54618se_config_init, - .read_status = (read_status_t)bnx2x_54618se_read_status, - .link_reset = (link_reset_t)bnx2x_54618se_link_reset, - .config_loopback = (config_loopback_t)bnx2x_54618se_config_loopback, - .format_fw_ver = (format_fw_ver_t)NULL, - .hw_reset = (hw_reset_t)NULL, - .set_link_led = (set_link_led_t)bnx2x_54618se_set_link_led, - .phy_specific_func = (phy_specific_func_t)NULL -}; -/*****************************************************************/ -/* */ -/* Populate the phy according. Main function: bnx2x_populate_phy */ -/* */ -/*****************************************************************/ - -static void bnx2x_populate_preemphasis(struct bnx2x *bp, u32 shmem_base, - struct bnx2x_phy *phy, u8 port, - u8 phy_index) -{ - /* Get the 4 lanes xgxs config rx and tx */ - u32 rx = 0, tx = 0, i; - for (i = 0; i < 2; i++) { - /* - * INT_PHY and EXT_PHY1 share the same value location in the - * shmem. When num_phys is greater than 1, than this value - * applies only to EXT_PHY1 - */ - if (phy_index == INT_PHY || phy_index == EXT_PHY1) { - rx = REG_RD(bp, shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].xgxs_config_rx[i<<1])); - - tx = REG_RD(bp, shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].xgxs_config_tx[i<<1])); - } else { - rx = REG_RD(bp, shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].xgxs_config2_rx[i<<1])); - - tx = REG_RD(bp, shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].xgxs_config2_rx[i<<1])); - } - - phy->rx_preemphasis[i << 1] = ((rx>>16) & 0xffff); - phy->rx_preemphasis[(i << 1) + 1] = (rx & 0xffff); - - phy->tx_preemphasis[i << 1] = ((tx>>16) & 0xffff); - phy->tx_preemphasis[(i << 1) + 1] = (tx & 0xffff); - } -} - -static u32 bnx2x_get_ext_phy_config(struct bnx2x *bp, u32 shmem_base, - u8 phy_index, u8 port) -{ - u32 ext_phy_config = 0; - switch (phy_index) { - case EXT_PHY1: - ext_phy_config = REG_RD(bp, shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].external_phy_config)); - break; - case EXT_PHY2: - ext_phy_config = REG_RD(bp, shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].external_phy_config2)); - break; - default: - DP(NETIF_MSG_LINK, "Invalid phy_index %d\n", phy_index); - return -EINVAL; - } - - return ext_phy_config; -} -static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, - struct bnx2x_phy *phy) -{ - u32 phy_addr; - u32 chip_id; - u32 switch_cfg = (REG_RD(bp, shmem_base + - offsetof(struct shmem_region, - dev_info.port_feature_config[port].link_config)) & - PORT_FEATURE_CONNECTED_SWITCH_MASK); - chip_id = REG_RD(bp, MISC_REG_CHIP_NUM) << 16; - DP(NETIF_MSG_LINK, ":chip_id = 0x%x\n", chip_id); - if (USES_WARPCORE(bp)) { - u32 serdes_net_if; - phy_addr = REG_RD(bp, - MISC_REG_WC0_CTRL_PHY_ADDR); - *phy = phy_warpcore; - if (REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR) == 0x3) - phy->flags |= FLAGS_4_PORT_MODE; - else - phy->flags &= ~FLAGS_4_PORT_MODE; - /* Check Dual mode */ - serdes_net_if = (REG_RD(bp, shmem_base + - offsetof(struct shmem_region, dev_info. - port_hw_config[port].default_cfg)) & - PORT_HW_CFG_NET_SERDES_IF_MASK); - /* - * Set the appropriate supported and flags indications per - * interface type of the chip - */ - switch (serdes_net_if) { - case PORT_HW_CFG_NET_SERDES_IF_SGMII: - phy->supported &= (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE | - SUPPORTED_Autoneg | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause); - phy->media_type = ETH_PHY_BASE_T; - break; - case PORT_HW_CFG_NET_SERDES_IF_XFI: - phy->media_type = ETH_PHY_XFP_FIBER; - break; - case PORT_HW_CFG_NET_SERDES_IF_SFI: - phy->supported &= (SUPPORTED_1000baseT_Full | - SUPPORTED_10000baseT_Full | - SUPPORTED_FIBRE | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause); - phy->media_type = ETH_PHY_SFP_FIBER; - break; - case PORT_HW_CFG_NET_SERDES_IF_KR: - phy->media_type = ETH_PHY_KR; - phy->supported &= (SUPPORTED_1000baseT_Full | - SUPPORTED_10000baseT_Full | - SUPPORTED_FIBRE | - SUPPORTED_Autoneg | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause); - break; - case PORT_HW_CFG_NET_SERDES_IF_DXGXS: - phy->media_type = ETH_PHY_KR; - phy->flags |= FLAGS_WC_DUAL_MODE; - phy->supported &= (SUPPORTED_20000baseMLD2_Full | - SUPPORTED_FIBRE | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause); - break; - case PORT_HW_CFG_NET_SERDES_IF_KR2: - phy->media_type = ETH_PHY_KR; - phy->flags |= FLAGS_WC_DUAL_MODE; - phy->supported &= (SUPPORTED_20000baseKR2_Full | - SUPPORTED_FIBRE | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause); - break; - default: - DP(NETIF_MSG_LINK, "Unknown WC interface type 0x%x\n", - serdes_net_if); - break; - } - - /* - * Enable MDC/MDIO work-around for E3 A0 since free running MDC - * was not set as expected. For B0, ECO will be enabled so there - * won't be an issue there - */ - if (CHIP_REV(bp) == CHIP_REV_Ax) - phy->flags |= FLAGS_MDC_MDIO_WA; - else - phy->flags |= FLAGS_MDC_MDIO_WA_B0; - } else { - switch (switch_cfg) { - case SWITCH_CFG_1G: - phy_addr = REG_RD(bp, - NIG_REG_SERDES0_CTRL_PHY_ADDR + - port * 0x10); - *phy = phy_serdes; - break; - case SWITCH_CFG_10G: - phy_addr = REG_RD(bp, - NIG_REG_XGXS0_CTRL_PHY_ADDR + - port * 0x18); - *phy = phy_xgxs; - break; - default: - DP(NETIF_MSG_LINK, "Invalid switch_cfg\n"); - return -EINVAL; - } - } - phy->addr = (u8)phy_addr; - phy->mdio_ctrl = bnx2x_get_emac_base(bp, - SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH, - port); - if (CHIP_IS_E2(bp)) - phy->def_md_devad = E2_DEFAULT_PHY_DEV_ADDR; - else - phy->def_md_devad = DEFAULT_PHY_DEV_ADDR; - - DP(NETIF_MSG_LINK, "Internal phy port=%d, addr=0x%x, mdio_ctl=0x%x\n", - port, phy->addr, phy->mdio_ctrl); - - bnx2x_populate_preemphasis(bp, shmem_base, phy, port, INT_PHY); - return 0; -} - -static int bnx2x_populate_ext_phy(struct bnx2x *bp, - u8 phy_index, - u32 shmem_base, - u32 shmem2_base, - u8 port, - struct bnx2x_phy *phy) -{ - u32 ext_phy_config, phy_type, config2; - u32 mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH; - ext_phy_config = bnx2x_get_ext_phy_config(bp, shmem_base, - phy_index, port); - phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config); - /* Select the phy type */ - switch (phy_type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: - mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_SWAPPED; - *phy = phy_8073; - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: - *phy = phy_8705; - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - *phy = phy_8706; - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: - mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1; - *phy = phy_8726; - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC: - /* BCM8727_NOC => BCM8727 no over current */ - mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1; - *phy = phy_8727; - phy->flags |= FLAGS_NOC; - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: - mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1; - *phy = phy_8727; - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: - *phy = phy_8481; - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: - *phy = phy_84823; - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833: - *phy = phy_84833; - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE: - *phy = phy_54618se; - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: - *phy = phy_7101; - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: - *phy = phy_null; - return -EINVAL; - default: - *phy = phy_null; - return 0; - } - - phy->addr = XGXS_EXT_PHY_ADDR(ext_phy_config); - bnx2x_populate_preemphasis(bp, shmem_base, phy, port, phy_index); - - /* - * The shmem address of the phy version is located on different - * structures. In case this structure is too old, do not set - * the address - */ - config2 = REG_RD(bp, shmem_base + offsetof(struct shmem_region, - dev_info.shared_hw_config.config2)); - if (phy_index == EXT_PHY1) { - phy->ver_addr = shmem_base + offsetof(struct shmem_region, - port_mb[port].ext_phy_fw_version); - - /* Check specific mdc mdio settings */ - if (config2 & SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK) - mdc_mdio_access = config2 & - SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK; - } else { - u32 size = REG_RD(bp, shmem2_base); - - if (size > - offsetof(struct shmem2_region, ext_phy_fw_version2)) { - phy->ver_addr = shmem2_base + - offsetof(struct shmem2_region, - ext_phy_fw_version2[port]); - } - /* Check specific mdc mdio settings */ - if (config2 & SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK) - mdc_mdio_access = (config2 & - SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK) >> - (SHARED_HW_CFG_MDC_MDIO_ACCESS2_SHIFT - - SHARED_HW_CFG_MDC_MDIO_ACCESS1_SHIFT); - } - phy->mdio_ctrl = bnx2x_get_emac_base(bp, mdc_mdio_access, port); - - /* - * In case mdc/mdio_access of the external phy is different than the - * mdc/mdio access of the XGXS, a HW lock must be taken in each access - * to prevent one port interfere with another port's CL45 operations. - */ - if (mdc_mdio_access != SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH) - phy->flags |= FLAGS_HW_LOCK_REQUIRED; - DP(NETIF_MSG_LINK, "phy_type 0x%x port %d found in index %d\n", - phy_type, port, phy_index); - DP(NETIF_MSG_LINK, " addr=0x%x, mdio_ctl=0x%x\n", - phy->addr, phy->mdio_ctrl); - return 0; -} - -static int bnx2x_populate_phy(struct bnx2x *bp, u8 phy_index, u32 shmem_base, - u32 shmem2_base, u8 port, struct bnx2x_phy *phy) -{ - int status = 0; - phy->type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN; - if (phy_index == INT_PHY) - return bnx2x_populate_int_phy(bp, shmem_base, port, phy); - status = bnx2x_populate_ext_phy(bp, phy_index, shmem_base, shmem2_base, - port, phy); - return status; -} - -static void bnx2x_phy_def_cfg(struct link_params *params, - struct bnx2x_phy *phy, - u8 phy_index) -{ - struct bnx2x *bp = params->bp; - u32 link_config; - /* Populate the default phy configuration for MF mode */ - if (phy_index == EXT_PHY2) { - link_config = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, dev_info. - port_feature_config[params->port].link_config2)); - phy->speed_cap_mask = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info. - port_hw_config[params->port].speed_capability_mask2)); - } else { - link_config = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, dev_info. - port_feature_config[params->port].link_config)); - phy->speed_cap_mask = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info. - port_hw_config[params->port].speed_capability_mask)); - } - DP(NETIF_MSG_LINK, "Default config phy idx %x cfg 0x%x speed_cap_mask" - " 0x%x\n", phy_index, link_config, phy->speed_cap_mask); - - phy->req_duplex = DUPLEX_FULL; - switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) { - case PORT_FEATURE_LINK_SPEED_10M_HALF: - phy->req_duplex = DUPLEX_HALF; - case PORT_FEATURE_LINK_SPEED_10M_FULL: - phy->req_line_speed = SPEED_10; - break; - case PORT_FEATURE_LINK_SPEED_100M_HALF: - phy->req_duplex = DUPLEX_HALF; - case PORT_FEATURE_LINK_SPEED_100M_FULL: - phy->req_line_speed = SPEED_100; - break; - case PORT_FEATURE_LINK_SPEED_1G: - phy->req_line_speed = SPEED_1000; - break; - case PORT_FEATURE_LINK_SPEED_2_5G: - phy->req_line_speed = SPEED_2500; - break; - case PORT_FEATURE_LINK_SPEED_10G_CX4: - phy->req_line_speed = SPEED_10000; - break; - default: - phy->req_line_speed = SPEED_AUTO_NEG; - break; - } - - switch (link_config & PORT_FEATURE_FLOW_CONTROL_MASK) { - case PORT_FEATURE_FLOW_CONTROL_AUTO: - phy->req_flow_ctrl = BNX2X_FLOW_CTRL_AUTO; - break; - case PORT_FEATURE_FLOW_CONTROL_TX: - phy->req_flow_ctrl = BNX2X_FLOW_CTRL_TX; - break; - case PORT_FEATURE_FLOW_CONTROL_RX: - phy->req_flow_ctrl = BNX2X_FLOW_CTRL_RX; - break; - case PORT_FEATURE_FLOW_CONTROL_BOTH: - phy->req_flow_ctrl = BNX2X_FLOW_CTRL_BOTH; - break; - default: - phy->req_flow_ctrl = BNX2X_FLOW_CTRL_NONE; - break; - } -} - -u32 bnx2x_phy_selection(struct link_params *params) -{ - u32 phy_config_swapped, prio_cfg; - u32 return_cfg = PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT; - - phy_config_swapped = params->multi_phy_config & - PORT_HW_CFG_PHY_SWAPPED_ENABLED; - - prio_cfg = params->multi_phy_config & - PORT_HW_CFG_PHY_SELECTION_MASK; - - if (phy_config_swapped) { - switch (prio_cfg) { - case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY: - return_cfg = PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY; - break; - case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY: - return_cfg = PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY; - break; - case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY: - return_cfg = PORT_HW_CFG_PHY_SELECTION_FIRST_PHY; - break; - case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY: - return_cfg = PORT_HW_CFG_PHY_SELECTION_SECOND_PHY; - break; - } - } else - return_cfg = prio_cfg; - - return return_cfg; -} - - -int bnx2x_phy_probe(struct link_params *params) -{ - u8 phy_index, actual_phy_idx, link_cfg_idx; - u32 phy_config_swapped, sync_offset, media_types; - struct bnx2x *bp = params->bp; - struct bnx2x_phy *phy; - params->num_phys = 0; - DP(NETIF_MSG_LINK, "Begin phy probe\n"); - phy_config_swapped = params->multi_phy_config & - PORT_HW_CFG_PHY_SWAPPED_ENABLED; - - for (phy_index = INT_PHY; phy_index < MAX_PHYS; - phy_index++) { - link_cfg_idx = LINK_CONFIG_IDX(phy_index); - actual_phy_idx = phy_index; - if (phy_config_swapped) { - if (phy_index == EXT_PHY1) - actual_phy_idx = EXT_PHY2; - else if (phy_index == EXT_PHY2) - actual_phy_idx = EXT_PHY1; - } - DP(NETIF_MSG_LINK, "phy_config_swapped %x, phy_index %x," - " actual_phy_idx %x\n", phy_config_swapped, - phy_index, actual_phy_idx); - phy = ¶ms->phy[actual_phy_idx]; - if (bnx2x_populate_phy(bp, phy_index, params->shmem_base, - params->shmem2_base, params->port, - phy) != 0) { - params->num_phys = 0; - DP(NETIF_MSG_LINK, "phy probe failed in phy index %d\n", - phy_index); - for (phy_index = INT_PHY; - phy_index < MAX_PHYS; - phy_index++) - *phy = phy_null; - return -EINVAL; - } - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) - break; - - sync_offset = params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[params->port].media_type); - media_types = REG_RD(bp, sync_offset); - - /* - * Update media type for non-PMF sync only for the first time - * In case the media type changes afterwards, it will be updated - * using the update_status function - */ - if ((media_types & (PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK << - (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * - actual_phy_idx))) == 0) { - media_types |= ((phy->media_type & - PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) << - (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * - actual_phy_idx)); - } - REG_WR(bp, sync_offset, media_types); - - bnx2x_phy_def_cfg(params, phy, phy_index); - params->num_phys++; - } - - DP(NETIF_MSG_LINK, "End phy probe. #phys found %x\n", params->num_phys); - return 0; -} - -void bnx2x_init_bmac_loopback(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - vars->link_up = 1; - vars->line_speed = SPEED_10000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->mac_type = MAC_TYPE_BMAC; - - vars->phy_flags = PHY_XGXS_FLAG; - - bnx2x_xgxs_deassert(params); - - /* set bmac loopback */ - bnx2x_bmac_enable(params, vars, 1); - - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); -} - -void bnx2x_init_emac_loopback(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - vars->link_up = 1; - vars->line_speed = SPEED_1000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->mac_type = MAC_TYPE_EMAC; - - vars->phy_flags = PHY_XGXS_FLAG; - - bnx2x_xgxs_deassert(params); - /* set bmac loopback */ - bnx2x_emac_enable(params, vars, 1); - bnx2x_emac_program(params, vars); - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); -} - -void bnx2x_init_xmac_loopback(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - vars->link_up = 1; - if (!params->req_line_speed[0]) - vars->line_speed = SPEED_10000; - else - vars->line_speed = params->req_line_speed[0]; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->mac_type = MAC_TYPE_XMAC; - vars->phy_flags = PHY_XGXS_FLAG; - /* - * Set WC to loopback mode since link is required to provide clock - * to the XMAC in 20G mode - */ - bnx2x_set_aer_mmd(params, ¶ms->phy[0]); - bnx2x_warpcore_reset_lane(bp, ¶ms->phy[0], 0); - params->phy[INT_PHY].config_loopback( - ¶ms->phy[INT_PHY], - params); - - bnx2x_xmac_enable(params, vars, 1); - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); -} - -void bnx2x_init_umac_loopback(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - vars->link_up = 1; - vars->line_speed = SPEED_1000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->mac_type = MAC_TYPE_UMAC; - vars->phy_flags = PHY_XGXS_FLAG; - bnx2x_umac_enable(params, vars, 1); - - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); -} - -void bnx2x_init_xgxs_loopback(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - vars->link_up = 1; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->duplex = DUPLEX_FULL; - if (params->req_line_speed[0] == SPEED_1000) - vars->line_speed = SPEED_1000; - else - vars->line_speed = SPEED_10000; - - if (!USES_WARPCORE(bp)) - bnx2x_xgxs_deassert(params); - bnx2x_link_initialize(params, vars); - - if (params->req_line_speed[0] == SPEED_1000) { - if (USES_WARPCORE(bp)) - bnx2x_umac_enable(params, vars, 0); - else { - bnx2x_emac_program(params, vars); - bnx2x_emac_enable(params, vars, 0); - } - } else { - if (USES_WARPCORE(bp)) - bnx2x_xmac_enable(params, vars, 0); - else - bnx2x_bmac_enable(params, vars, 0); - } - - if (params->loopback_mode == LOOPBACK_XGXS) { - /* set 10G XGXS loopback */ - params->phy[INT_PHY].config_loopback( - ¶ms->phy[INT_PHY], - params); - - } else { - /* set external phy loopback */ - u8 phy_index; - for (phy_index = EXT_PHY1; - phy_index < params->num_phys; phy_index++) { - if (params->phy[phy_index].config_loopback) - params->phy[phy_index].config_loopback( - ¶ms->phy[phy_index], - params); - } - } - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); - - bnx2x_set_led(params, vars, LED_MODE_OPER, vars->line_speed); -} - -int bnx2x_phy_init(struct link_params *params, struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "Phy Initialization started\n"); - DP(NETIF_MSG_LINK, "(1) req_speed %d, req_flowctrl %d\n", - params->req_line_speed[0], params->req_flow_ctrl[0]); - DP(NETIF_MSG_LINK, "(2) req_speed %d, req_flowctrl %d\n", - params->req_line_speed[1], params->req_flow_ctrl[1]); - vars->link_status = 0; - vars->phy_link_up = 0; - vars->link_up = 0; - vars->line_speed = 0; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->mac_type = MAC_TYPE_NONE; - vars->phy_flags = 0; - - /* disable attentions */ - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G | - NIG_MASK_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - - bnx2x_emac_init(params, vars); - - if (params->num_phys == 0) { - DP(NETIF_MSG_LINK, "No phy found for initialization !!\n"); - return -EINVAL; - } - set_phy_vars(params, vars); - - DP(NETIF_MSG_LINK, "Num of phys on board: %d\n", params->num_phys); - switch (params->loopback_mode) { - case LOOPBACK_BMAC: - bnx2x_init_bmac_loopback(params, vars); - break; - case LOOPBACK_EMAC: - bnx2x_init_emac_loopback(params, vars); - break; - case LOOPBACK_XMAC: - bnx2x_init_xmac_loopback(params, vars); - break; - case LOOPBACK_UMAC: - bnx2x_init_umac_loopback(params, vars); - break; - case LOOPBACK_XGXS: - case LOOPBACK_EXT_PHY: - bnx2x_init_xgxs_loopback(params, vars); - break; - default: - if (!CHIP_IS_E3(bp)) { - if (params->switch_cfg == SWITCH_CFG_10G) - bnx2x_xgxs_deassert(params); - else - bnx2x_serdes_deassert(bp, params->port); - } - bnx2x_link_initialize(params, vars); - msleep(30); - bnx2x_link_int_enable(params); - break; - } - return 0; -} - -int bnx2x_link_reset(struct link_params *params, struct link_vars *vars, - u8 reset_ext_phy) -{ - struct bnx2x *bp = params->bp; - u8 phy_index, port = params->port, clear_latch_ind = 0; - DP(NETIF_MSG_LINK, "Resetting the link of port %d\n", port); - /* disable attentions */ - vars->link_status = 0; - bnx2x_update_mng(params, vars->link_status); - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G | - NIG_MASK_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - - /* activate nig drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); - - /* disable nig egress interface */ - if (!CHIP_IS_E3(bp)) { - REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0); - REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); - } - - /* Stop BigMac rx */ - if (!CHIP_IS_E3(bp)) - bnx2x_bmac_rx_disable(bp, port); - else - bnx2x_xmac_disable(params); - /* disable emac */ - if (!CHIP_IS_E3(bp)) - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); - - msleep(10); - /* The PHY reset is controlled by GPIO 1 - * Hold it as vars low - */ - /* clear link led */ - bnx2x_set_led(params, vars, LED_MODE_OFF, 0); - - if (reset_ext_phy) { - bnx2x_set_mdio_clk(bp, params->chip_id, port); - for (phy_index = EXT_PHY1; phy_index < params->num_phys; - phy_index++) { - if (params->phy[phy_index].link_reset) { - bnx2x_set_aer_mmd(params, - ¶ms->phy[phy_index]); - params->phy[phy_index].link_reset( - ¶ms->phy[phy_index], - params); - } - if (params->phy[phy_index].flags & - FLAGS_REARM_LATCH_SIGNAL) - clear_latch_ind = 1; - } - } - - if (clear_latch_ind) { - /* Clear latching indication */ - bnx2x_rearm_latch_signal(bp, port, 0); - bnx2x_bits_dis(bp, NIG_REG_LATCH_BC_0 + port*4, - 1 << NIG_LATCH_BC_ENABLE_MI_INT); - } - if (params->phy[INT_PHY].link_reset) - params->phy[INT_PHY].link_reset( - ¶ms->phy[INT_PHY], params); - /* reset BigMac */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - - /* disable nig ingress interface */ - if (!CHIP_IS_E3(bp)) { - REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0); - REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0); - } - vars->link_up = 0; - vars->phy_flags = 0; - return 0; -} - -/****************************************************************************/ -/* Common function */ -/****************************************************************************/ -static int bnx2x_8073_common_init_phy(struct bnx2x *bp, - u32 shmem_base_path[], - u32 shmem2_base_path[], u8 phy_index, - u32 chip_id) -{ - struct bnx2x_phy phy[PORT_MAX]; - struct bnx2x_phy *phy_blk[PORT_MAX]; - u16 val; - s8 port = 0; - s8 port_of_path = 0; - u32 swap_val, swap_override; - swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); - swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); - port ^= (swap_val && swap_override); - bnx2x_ext_phy_hw_reset(bp, port); - /* PART1 - Reset both phys */ - for (port = PORT_MAX - 1; port >= PORT_0; port--) { - u32 shmem_base, shmem2_base; - /* In E2, same phy is using for port0 of the two paths */ - if (CHIP_IS_E1x(bp)) { - shmem_base = shmem_base_path[0]; - shmem2_base = shmem2_base_path[0]; - port_of_path = port; - } else { - shmem_base = shmem_base_path[port]; - shmem2_base = shmem2_base_path[port]; - port_of_path = 0; - } - - /* Extract the ext phy address for the port */ - if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base, - port_of_path, &phy[port]) != - 0) { - DP(NETIF_MSG_LINK, "populate_phy failed\n"); - return -EINVAL; - } - /* disable attentions */ - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + - port_of_path*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G | - NIG_MASK_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - - /* Need to take the phy out of low power mode in order - to write to access its registers */ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, - port); - - /* Reset the phy */ - bnx2x_cl45_write(bp, &phy[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, - 1<<15); - } - - /* Add delay of 150ms after reset */ - msleep(150); - - if (phy[PORT_0].addr & 0x1) { - phy_blk[PORT_0] = &(phy[PORT_1]); - phy_blk[PORT_1] = &(phy[PORT_0]); - } else { - phy_blk[PORT_0] = &(phy[PORT_0]); - phy_blk[PORT_1] = &(phy[PORT_1]); - } - - /* PART2 - Download firmware to both phys */ - for (port = PORT_MAX - 1; port >= PORT_0; port--) { - if (CHIP_IS_E1x(bp)) - port_of_path = port; - else - port_of_path = 0; - - DP(NETIF_MSG_LINK, "Loading spirom for phy address 0x%x\n", - phy_blk[port]->addr); - if (bnx2x_8073_8727_external_rom_boot(bp, phy_blk[port], - port_of_path)) - return -EINVAL; - - /* Only set bit 10 = 1 (Tx power down) */ - bnx2x_cl45_read(bp, phy_blk[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_TX_POWER_DOWN, &val); - - /* Phase1 of TX_POWER_DOWN reset */ - bnx2x_cl45_write(bp, phy_blk[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_TX_POWER_DOWN, - (val | 1<<10)); - } - - /* - * Toggle Transmitter: Power down and then up with 600ms delay - * between - */ - msleep(600); - - /* PART3 - complete TX_POWER_DOWN process, and set GPIO2 back to low */ - for (port = PORT_MAX - 1; port >= PORT_0; port--) { - /* Phase2 of POWER_DOWN_RESET */ - /* Release bit 10 (Release Tx power down) */ - bnx2x_cl45_read(bp, phy_blk[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_TX_POWER_DOWN, &val); - - bnx2x_cl45_write(bp, phy_blk[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10)))); - msleep(15); - - /* Read modify write the SPI-ROM version select register */ - bnx2x_cl45_read(bp, phy_blk[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_EDC_FFE_MAIN, &val); - bnx2x_cl45_write(bp, phy_blk[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_EDC_FFE_MAIN, (val | (1<<12))); - - /* set GPIO2 back to LOW */ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_LOW, port); - } - return 0; -} -static int bnx2x_8726_common_init_phy(struct bnx2x *bp, - u32 shmem_base_path[], - u32 shmem2_base_path[], u8 phy_index, - u32 chip_id) -{ - u32 val; - s8 port; - struct bnx2x_phy phy; - /* Use port1 because of the static port-swap */ - /* Enable the module detection interrupt */ - val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN); - val |= ((1<<MISC_REGISTERS_GPIO_3)| - (1<<(MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT))); - REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val); - - bnx2x_ext_phy_hw_reset(bp, 0); - msleep(5); - for (port = 0; port < PORT_MAX; port++) { - u32 shmem_base, shmem2_base; - - /* In E2, same phy is using for port0 of the two paths */ - if (CHIP_IS_E1x(bp)) { - shmem_base = shmem_base_path[0]; - shmem2_base = shmem2_base_path[0]; - } else { - shmem_base = shmem_base_path[port]; - shmem2_base = shmem2_base_path[port]; - } - /* Extract the ext phy address for the port */ - if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base, - port, &phy) != - 0) { - DP(NETIF_MSG_LINK, "populate phy failed\n"); - return -EINVAL; - } - - /* Reset phy*/ - bnx2x_cl45_write(bp, &phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001); - - - /* Set fault module detected LED on */ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, - MISC_REGISTERS_GPIO_HIGH, - port); - } - - return 0; -} -static void bnx2x_get_ext_phy_reset_gpio(struct bnx2x *bp, u32 shmem_base, - u8 *io_gpio, u8 *io_port) -{ - - u32 phy_gpio_reset = REG_RD(bp, shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[PORT_0].default_cfg)); - switch (phy_gpio_reset) { - case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0: - *io_gpio = 0; - *io_port = 0; - break; - case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P0: - *io_gpio = 1; - *io_port = 0; - break; - case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P0: - *io_gpio = 2; - *io_port = 0; - break; - case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P0: - *io_gpio = 3; - *io_port = 0; - break; - case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P1: - *io_gpio = 0; - *io_port = 1; - break; - case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P1: - *io_gpio = 1; - *io_port = 1; - break; - case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P1: - *io_gpio = 2; - *io_port = 1; - break; - case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P1: - *io_gpio = 3; - *io_port = 1; - break; - default: - /* Don't override the io_gpio and io_port */ - break; - } -} - -static int bnx2x_8727_common_init_phy(struct bnx2x *bp, - u32 shmem_base_path[], - u32 shmem2_base_path[], u8 phy_index, - u32 chip_id) -{ - s8 port, reset_gpio; - u32 swap_val, swap_override; - struct bnx2x_phy phy[PORT_MAX]; - struct bnx2x_phy *phy_blk[PORT_MAX]; - s8 port_of_path; - swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); - swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); - - reset_gpio = MISC_REGISTERS_GPIO_1; - port = 1; - - /* - * Retrieve the reset gpio/port which control the reset. - * Default is GPIO1, PORT1 - */ - bnx2x_get_ext_phy_reset_gpio(bp, shmem_base_path[0], - (u8 *)&reset_gpio, (u8 *)&port); - - /* Calculate the port based on port swap */ - port ^= (swap_val && swap_override); - - /* Initiate PHY reset*/ - bnx2x_set_gpio(bp, reset_gpio, MISC_REGISTERS_GPIO_OUTPUT_LOW, - port); - msleep(1); - bnx2x_set_gpio(bp, reset_gpio, MISC_REGISTERS_GPIO_OUTPUT_HIGH, - port); - - msleep(5); - - /* PART1 - Reset both phys */ - for (port = PORT_MAX - 1; port >= PORT_0; port--) { - u32 shmem_base, shmem2_base; - - /* In E2, same phy is using for port0 of the two paths */ - if (CHIP_IS_E1x(bp)) { - shmem_base = shmem_base_path[0]; - shmem2_base = shmem2_base_path[0]; - port_of_path = port; - } else { - shmem_base = shmem_base_path[port]; - shmem2_base = shmem2_base_path[port]; - port_of_path = 0; - } - - /* Extract the ext phy address for the port */ - if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base, - port_of_path, &phy[port]) != - 0) { - DP(NETIF_MSG_LINK, "populate phy failed\n"); - return -EINVAL; - } - /* disable attentions */ - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + - port_of_path*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G | - NIG_MASK_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - - - /* Reset the phy */ - bnx2x_cl45_write(bp, &phy[port], - MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); - } - - /* Add delay of 150ms after reset */ - msleep(150); - if (phy[PORT_0].addr & 0x1) { - phy_blk[PORT_0] = &(phy[PORT_1]); - phy_blk[PORT_1] = &(phy[PORT_0]); - } else { - phy_blk[PORT_0] = &(phy[PORT_0]); - phy_blk[PORT_1] = &(phy[PORT_1]); - } - /* PART2 - Download firmware to both phys */ - for (port = PORT_MAX - 1; port >= PORT_0; port--) { - if (CHIP_IS_E1x(bp)) - port_of_path = port; - else - port_of_path = 0; - DP(NETIF_MSG_LINK, "Loading spirom for phy address 0x%x\n", - phy_blk[port]->addr); - if (bnx2x_8073_8727_external_rom_boot(bp, phy_blk[port], - port_of_path)) - return -EINVAL; - /* Disable PHY transmitter output */ - bnx2x_cl45_write(bp, phy_blk[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_TX_DISABLE, 1); - - } - return 0; -} - -static int bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base_path[], - u32 shmem2_base_path[], u8 phy_index, - u32 ext_phy_type, u32 chip_id) -{ - int rc = 0; - - switch (ext_phy_type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: - rc = bnx2x_8073_common_init_phy(bp, shmem_base_path, - shmem2_base_path, - phy_index, chip_id); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC: - rc = bnx2x_8727_common_init_phy(bp, shmem_base_path, - shmem2_base_path, - phy_index, chip_id); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: - /* - * GPIO1 affects both ports, so there's need to pull - * it for single port alone - */ - rc = bnx2x_8726_common_init_phy(bp, shmem_base_path, - shmem2_base_path, - phy_index, chip_id); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833: - /* - * GPIO3's are linked, and so both need to be toggled - * to obtain required 2us pulse. - */ - rc = bnx2x_84833_common_init_phy(bp, shmem_base_path, chip_id); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: - rc = -EINVAL; - break; - default: - DP(NETIF_MSG_LINK, - "ext_phy 0x%x common init not required\n", - ext_phy_type); - break; - } - - if (rc != 0) - netdev_err(bp->dev, "Warning: PHY was not initialized," - " Port %d\n", - 0); - return rc; -} - -int bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], - u32 shmem2_base_path[], u32 chip_id) -{ - int rc = 0; - u32 phy_ver, val; - u8 phy_index = 0; - u32 ext_phy_type, ext_phy_config; - bnx2x_set_mdio_clk(bp, chip_id, PORT_0); - bnx2x_set_mdio_clk(bp, chip_id, PORT_1); - DP(NETIF_MSG_LINK, "Begin common phy init\n"); - if (CHIP_IS_E3(bp)) { - /* Enable EPIO */ - val = REG_RD(bp, MISC_REG_GEN_PURP_HWG); - REG_WR(bp, MISC_REG_GEN_PURP_HWG, val | 1); - } - /* Check if common init was already done */ - phy_ver = REG_RD(bp, shmem_base_path[0] + - offsetof(struct shmem_region, - port_mb[PORT_0].ext_phy_fw_version)); - if (phy_ver) { - DP(NETIF_MSG_LINK, "Not doing common init; phy ver is 0x%x\n", - phy_ver); - return 0; - } - - /* Read the ext_phy_type for arbitrary port(0) */ - for (phy_index = EXT_PHY1; phy_index < MAX_PHYS; - phy_index++) { - ext_phy_config = bnx2x_get_ext_phy_config(bp, - shmem_base_path[0], - phy_index, 0); - ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config); - rc |= bnx2x_ext_phy_common_init(bp, shmem_base_path, - shmem2_base_path, - phy_index, ext_phy_type, - chip_id); - } - return rc; -} - -static void bnx2x_check_over_curr(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u32 cfg_pin; - u8 port = params->port; - u32 pin_val; - - cfg_pin = (REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].e3_cmn_pin_cfg1)) & - PORT_HW_CFG_E3_OVER_CURRENT_MASK) >> - PORT_HW_CFG_E3_OVER_CURRENT_SHIFT; - - /* Ignore check if no external input PIN available */ - if (bnx2x_get_cfg_pin(bp, cfg_pin, &pin_val) != 0) - return; - - if (!pin_val) { - if ((vars->phy_flags & PHY_OVER_CURRENT_FLAG) == 0) { - netdev_err(bp->dev, "Error: Power fault on Port %d has" - " been detected and the power to " - "that SFP+ module has been removed" - " to prevent failure of the card." - " Please remove the SFP+ module and" - " restart the system to clear this" - " error.\n", - params->port); - vars->phy_flags |= PHY_OVER_CURRENT_FLAG; - } - } else - vars->phy_flags &= ~PHY_OVER_CURRENT_FLAG; -} - -static void bnx2x_analyze_link_error(struct link_params *params, - struct link_vars *vars, u32 lss_status) -{ - struct bnx2x *bp = params->bp; - /* Compare new value with previous value */ - u8 led_mode; - u32 half_open_conn = (vars->phy_flags & PHY_HALF_OPEN_CONN_FLAG) > 0; - - if ((lss_status ^ half_open_conn) == 0) - return; - - /* If values differ */ - DP(NETIF_MSG_LINK, "Link changed:%x %x->%x\n", vars->link_up, - half_open_conn, lss_status); - - /* - * a. Update shmem->link_status accordingly - * b. Update link_vars->link_up - */ - if (lss_status) { - DP(NETIF_MSG_LINK, "Remote Fault detected !!!\n"); - vars->link_status &= ~LINK_STATUS_LINK_UP; - vars->link_up = 0; - vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; - /* - * Set LED mode to off since the PHY doesn't know about these - * errors - */ - led_mode = LED_MODE_OFF; - } else { - DP(NETIF_MSG_LINK, "Remote Fault cleared\n"); - vars->link_status |= LINK_STATUS_LINK_UP; - vars->link_up = 1; - vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG; - led_mode = LED_MODE_OPER; - } - /* Update the LED according to the link state */ - bnx2x_set_led(params, vars, led_mode, SPEED_10000); - - /* Update link status in the shared memory */ - bnx2x_update_mng(params, vars->link_status); - - /* C. Trigger General Attention */ - vars->periodic_flags |= PERIODIC_FLAGS_LINK_EVENT; - bnx2x_notify_link_changed(bp); -} - -/****************************************************************************** -* Description: -* This function checks for half opened connection change indication. -* When such change occurs, it calls the bnx2x_analyze_link_error -* to check if Remote Fault is set or cleared. Reception of remote fault -* status message in the MAC indicates that the peer's MAC has detected -* a fault, for example, due to break in the TX side of fiber. -* -******************************************************************************/ -static void bnx2x_check_half_open_conn(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u32 lss_status = 0; - u32 mac_base; - /* In case link status is physically up @ 10G do */ - if ((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0) - return; - - if (CHIP_IS_E3(bp) && - (REG_RD(bp, MISC_REG_RESET_REG_2) & - (MISC_REGISTERS_RESET_REG_2_XMAC))) { - /* Check E3 XMAC */ - /* - * Note that link speed cannot be queried here, since it may be - * zero while link is down. In case UMAC is active, LSS will - * simply not be set - */ - mac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; - - /* Clear stick bits (Requires rising edge) */ - REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0); - REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, - XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS | - XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS); - if (REG_RD(bp, mac_base + XMAC_REG_RX_LSS_STATUS)) - lss_status = 1; - - bnx2x_analyze_link_error(params, vars, lss_status); - } else if (REG_RD(bp, MISC_REG_RESET_REG_2) & - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) { - /* Check E1X / E2 BMAC */ - u32 lss_status_reg; - u32 wb_data[2]; - mac_base = params->port ? NIG_REG_INGRESS_BMAC1_MEM : - NIG_REG_INGRESS_BMAC0_MEM; - /* Read BIGMAC_REGISTER_RX_LSS_STATUS */ - if (CHIP_IS_E2(bp)) - lss_status_reg = BIGMAC2_REGISTER_RX_LSS_STAT; - else - lss_status_reg = BIGMAC_REGISTER_RX_LSS_STATUS; - - REG_RD_DMAE(bp, mac_base + lss_status_reg, wb_data, 2); - lss_status = (wb_data[0] > 0); - - bnx2x_analyze_link_error(params, vars, lss_status); - } -} - -void bnx2x_period_func(struct link_params *params, struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 phy_idx; - if (!params) { - DP(NETIF_MSG_LINK, "Uninitialized params !\n"); - return; - } - - for (phy_idx = INT_PHY; phy_idx < MAX_PHYS; phy_idx++) { - if (params->phy[phy_idx].flags & FLAGS_TX_ERROR_CHECK) { - bnx2x_set_aer_mmd(params, ¶ms->phy[phy_idx]); - bnx2x_check_half_open_conn(params, vars); - break; - } - } - - if (CHIP_IS_E3(bp)) - bnx2x_check_over_curr(params, vars); -} - -u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base, u32 shmem2_base) -{ - u8 phy_index; - struct bnx2x_phy phy; - for (phy_index = INT_PHY; phy_index < MAX_PHYS; - phy_index++) { - if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base, - 0, &phy) != 0) { - DP(NETIF_MSG_LINK, "populate phy failed\n"); - return 0; - } - - if (phy.flags & FLAGS_HW_LOCK_REQUIRED) - return 1; - } - return 0; -} - -u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, - u32 shmem_base, - u32 shmem2_base, - u8 port) -{ - u8 phy_index, fan_failure_det_req = 0; - struct bnx2x_phy phy; - for (phy_index = EXT_PHY1; phy_index < MAX_PHYS; - phy_index++) { - if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base, - port, &phy) - != 0) { - DP(NETIF_MSG_LINK, "populate phy failed\n"); - return 0; - } - fan_failure_det_req |= (phy.flags & - FLAGS_FAN_FAILURE_DET_REQ); - } - return fan_failure_det_req; -} - -void bnx2x_hw_reset_phy(struct link_params *params) -{ - u8 phy_index; - struct bnx2x *bp = params->bp; - bnx2x_update_mng(params, 0); - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G | - NIG_MASK_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - - for (phy_index = INT_PHY; phy_index < MAX_PHYS; - phy_index++) { - if (params->phy[phy_index].hw_reset) { - params->phy[phy_index].hw_reset( - ¶ms->phy[phy_index], - params); - params->phy[phy_index] = phy_null; - } - } -} - -void bnx2x_init_mod_abs_int(struct bnx2x *bp, struct link_vars *vars, - u32 chip_id, u32 shmem_base, u32 shmem2_base, - u8 port) -{ - u8 gpio_num = 0xff, gpio_port = 0xff, phy_index; - u32 val; - u32 offset, aeu_mask, swap_val, swap_override, sync_offset; - if (CHIP_IS_E3(bp)) { - if (bnx2x_get_mod_abs_int_cfg(bp, chip_id, - shmem_base, - port, - &gpio_num, - &gpio_port) != 0) - return; - } else { - struct bnx2x_phy phy; - for (phy_index = EXT_PHY1; phy_index < MAX_PHYS; - phy_index++) { - if (bnx2x_populate_phy(bp, phy_index, shmem_base, - shmem2_base, port, &phy) - != 0) { - DP(NETIF_MSG_LINK, "populate phy failed\n"); - return; - } - if (phy.type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) { - gpio_num = MISC_REGISTERS_GPIO_3; - gpio_port = port; - break; - } - } - } - - if (gpio_num == 0xff) - return; - - /* Set GPIO3 to trigger SFP+ module insertion/removal */ - bnx2x_set_gpio(bp, gpio_num, MISC_REGISTERS_GPIO_INPUT_HI_Z, gpio_port); - - swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); - swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); - gpio_port ^= (swap_val && swap_override); - - vars->aeu_int_mask = AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 << - (gpio_num + (gpio_port << 2)); - - sync_offset = shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].aeu_int_mask); - REG_WR(bp, sync_offset, vars->aeu_int_mask); - - DP(NETIF_MSG_LINK, "Setting MOD_ABS (GPIO%d_P%d) AEU to 0x%x\n", - gpio_num, gpio_port, vars->aeu_int_mask); - - if (port == 0) - offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0; - else - offset = MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0; - - /* Open appropriate AEU for interrupts */ - aeu_mask = REG_RD(bp, offset); - aeu_mask |= vars->aeu_int_mask; - REG_WR(bp, offset, aeu_mask); - - /* Enable the GPIO to trigger interrupt */ - val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN); - val |= 1 << (gpio_num + (gpio_port << 2)); - REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val); -} |