diff options
| author |   Yaniv Rosner <yanivr@broadcom.com> | 2011-06-14 01:34:12 +0000 |
|---|---|---|
| committer |   David S. Miller <davem@conan.davemloft.net> | 2011-06-15 10:56:57 -0400 |
| commit | 3c9ada227c56c6f41e24b01d183b00b007c7ac93 (patch) | |
| tree | a6aeae7cdf2ae66cf43b033ebe437beb27a07fbc /drivers/net/bnx2x/bnx2x_link.h | |
| parent | bnx2x: Add new MAC support for 578xx (diff) | |
| download | linux-dev-3c9ada227c56c6f41e24b01d183b00b007c7ac93.tar.xz linux-dev-3c9ada227c56c6f41e24b01d183b00b007c7ac93.zip | |
bnx2x: Add Warpcore support for 578xx
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.h')
| -rw-r--r-- | drivers/net/bnx2x/bnx2x_link.h | 40 |
1 files changed, 33 insertions, 7 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h index 12602f18fae8..82bc021bdf07 100644 --- a/drivers/net/bnx2x/bnx2x_link.h +++ b/drivers/net/bnx2x/bnx2x_link.h @@ -33,12 +33,13 @@ #define BNX2X_FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH #define BNX2X_FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE +#define NET_SERDES_IF_XFI 1 +#define NET_SERDES_IF_SFI 2 +#define NET_SERDES_IF_KR 3 +#define NET_SERDES_IF_DXGXS 4 + #define SPEED_AUTO_NEG 0 -#define SPEED_12000 12000 -#define SPEED_12500 12500 -#define SPEED_13000 13000 -#define SPEED_15000 15000 -#define SPEED_16000 16000 +#define SPEED_20000 20000 #define SFP_EEPROM_VENDOR_NAME_ADDR 0x14 #define SFP_EEPROM_VENDOR_NAME_SIZE 16 @@ -46,6 +47,12 @@ #define SFP_EEPROM_VENDOR_OUI_SIZE 3 #define SFP_EEPROM_PART_NO_ADDR 0x28 #define SFP_EEPROM_PART_NO_SIZE 16 +#define SFP_EEPROM_REVISION_ADDR 0x38 +#define SFP_EEPROM_REVISION_SIZE 4 +#define SFP_EEPROM_SERIAL_ADDR 0x44 +#define SFP_EEPROM_SERIAL_SIZE 16 +#define SFP_EEPROM_DATE_ADDR 0x54 /* ASCII YYMMDD */ +#define SFP_EEPROM_DATE_SIZE 6 #define PWR_FLT_ERR_MSG_LEN 250 #define XGXS_EXT_PHY_TYPE(ext_phy_config) \ @@ -62,7 +69,18 @@ #define SINGLE_MEDIA(params) (params->num_phys == 2) /* Dual Media board contains two external phy with different media */ #define DUAL_MEDIA(params) (params->num_phys == 3) + +#define FW_PARAM_PHY_ADDR_MASK 0x000000FF +#define FW_PARAM_PHY_TYPE_MASK 0x0000FF00 +#define FW_PARAM_MDIO_CTRL_MASK 0xFFFF0000 #define FW_PARAM_MDIO_CTRL_OFFSET 16 +#define FW_PARAM_PHY_ADDR(fw_param) (fw_param & \ + FW_PARAM_PHY_ADDR_MASK) +#define FW_PARAM_PHY_TYPE(fw_param) (fw_param & \ + FW_PARAM_PHY_TYPE_MASK) +#define FW_PARAM_MDIO_CTRL(fw_param) ((fw_param & \ + FW_PARAM_MDIO_CTRL_MASK) >> \ + FW_PARAM_MDIO_CTRL_OFFSET) #define FW_PARAM_SET(phy_addr, phy_type, mdio_access) \ (phy_addr | phy_type | mdio_access << FW_PARAM_MDIO_CTRL_OFFSET) @@ -121,9 +139,12 @@ struct bnx2x_phy { #define FLAGS_FAN_FAILURE_DET_REQ (1<<2) /* Initialize first the XGXS and only then the phy itself */ #define FLAGS_INIT_XGXS_FIRST (1<<3) +#define FLAGS_WC_DUAL_MODE (1<<4) #define FLAGS_4_PORT_MODE (1<<5) #define FLAGS_REARM_LATCH_SIGNAL (1<<6) #define FLAGS_SFP_NOT_APPROVED (1<<7) +#define FLAGS_MDC_MDIO_WA (1<<8) +#define FLAGS_DUMMY_READ (1<<9) /* preemphasis values for the rx side */ u16 rx_preemphasis[4]; @@ -142,8 +163,8 @@ struct bnx2x_phy { #define ETH_PHY_XFP_FIBER 0x2 #define ETH_PHY_DA_TWINAX 0x3 #define ETH_PHY_BASE_T 0x4 -#define ETH_PHY_KR 0xf0 -#define ETH_PHY_CX4 0xf1 +#define ETH_PHY_KR 0xf0 +#define ETH_PHY_CX4 0xf1 #define ETH_PHY_NOT_PRESENT 0xff /* The address in which version is located*/ @@ -248,6 +269,8 @@ struct link_params { /* Output parameters */ struct link_vars { u8 phy_flags; +#define PHY_XGXS_FLAG (1<<0) +#define PHY_SGMII_FLAG (1<<1) u8 mac_type; #define MAC_TYPE_NONE 0 @@ -414,4 +437,7 @@ void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars, void bnx2x_init_mod_abs_int(struct bnx2x *bp, struct link_vars *vars, u32 chip_id, u32 shmem_base, u32 shmem2_base, u8 port); + +int bnx2x_sfp_module_detection(struct bnx2x_phy *phy, + struct link_params *params); #endif /* BNX2X_LINK_H */ |