bnx2x: Using registers name

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 36 insertions, 35 deletions

diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 4a594b84ba20..39db995c6985 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -2094,7 +2094,7 @@ static u8 bnx2x_8073_is_snr_needed(struct link_params *params)
 		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
 		      ext_phy_addr,
 		      MDIO_PMA_DEVAD,
-		      0xc801, &val);
+		      MDIO_PMA_REG_8073_CHIP_REV, &val);
 
 	if (val != 1) {
 		/* No need to workaround in 8073 A1 */
@@ -2126,7 +2126,7 @@ static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params)
 		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
 		      ext_phy_addr,
 		      MDIO_PMA_DEVAD,
-		      0xc801, &val);
+		      MDIO_PMA_REG_8073_CHIP_REV, &val);
 
 	if (val > 0) {
 		/* No need to workaround in 8073 A1 */
@@ -2142,7 +2142,8 @@ static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params)
 			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
 			      ext_phy_addr,
 			      MDIO_PMA_DEVAD,
-			      0xc820, &val);
+			      MDIO_PMA_REG_8073_SPEED_LINK_STATUS,
+			      &val);
 		  /* If bit [14] = 0 or bit [13] = 0, continue on with
 		   system initialization (XAUI work-around not required,
 		    as these bits indicate 2.5G or 1G link up). */
@@ -2160,7 +2161,7 @@ static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params)
 					PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
 					ext_phy_addr,
 					MDIO_PMA_DEVAD,
-					0xc841, &val);
+					MDIO_PMA_REG_8073_XAUI_WA, &val);
 				if (val & (1<<15)) {
 					DP(NETIF_MSG_LINK,
 					  "XAUI workaround has completed\n");
@@ -2758,7 +2759,7 @@ static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
 		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
 		      ext_phy_addr,
 		      MDIO_PMA_DEVAD,
-		      0xc801, &val);
+		      MDIO_PMA_REG_8073_CHIP_REV, &val);
 
 	if (val == 0) {
 		/* Mustn't set low power mode in 8073 A0 */
@@ -3283,7 +3284,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 				      ext_phy_type,
 				      ext_phy_addr,
 				      MDIO_PMA_DEVAD,
-				      0xca13,
+				      MDIO_PMA_REG_M8051_MSGOUT_REG,
 				      &tmp1);
 
 			bnx2x_cl45_read(bp, params->port,
@@ -3350,7 +3351,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 					      ext_phy_type,
 					      ext_phy_addr,
 					      MDIO_AN_DEVAD,
-					      0x8329, &tmp1);
+					      MDIO_AN_REG_8073_2_5G, &tmp1);
 
 				if (((params->speed_cap_mask &
 				      PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) &&
@@ -3364,7 +3365,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 					 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
 					 ext_phy_addr,
 					 MDIO_PMA_DEVAD,
-					 0xc801, &phy_ver);
+					 MDIO_PMA_REG_8073_CHIP_REV, &phy_ver);
 					DP(NETIF_MSG_LINK, "Add 2.5G\n");
 					if (phy_ver > 0)
 						tmp1 |= 1;
@@ -3379,7 +3380,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 					       ext_phy_type,
 					       ext_phy_addr,
 					       MDIO_AN_DEVAD,
-					       0x8329, tmp1);
+					       MDIO_AN_REG_8073_2_5G, tmp1);
 			}
 
 			/* Add support for CL37 (passive mode) II */
@@ -3737,7 +3738,7 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 				      ext_phy_type,
 				      ext_phy_addr,
 				      MDIO_PMA_DEVAD,
-				      0xca13,
+				      MDIO_PMA_REG_M8051_MSGOUT_REG,
 				      &val1);
 
 			/* Check the LASI */
@@ -3782,17 +3783,17 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 					}
 				}
 				bnx2x_cl45_read(bp, params->port,
-						      ext_phy_type,
-						      ext_phy_addr,
-						      MDIO_AN_DEVAD,
-						      0x8304,
-						      &an1000_status);
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_LINK_STATUS,
+					      &an1000_status);
 				bnx2x_cl45_read(bp, params->port,
-						      ext_phy_type,
-						      ext_phy_addr,
-						      MDIO_AN_DEVAD,
-						      0x8304,
-						      &an1000_status);
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_LINK_STATUS,
+					      &an1000_status);
 
 				/* Check the link status on 1.1.2 */
 				bnx2x_cl45_read(bp, params->port,
@@ -3837,11 +3838,11 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 
 				}
 				bnx2x_cl45_read(bp, params->port,
-						      ext_phy_type,
-						      ext_phy_addr,
-						      MDIO_PMA_DEVAD,
-						      0xc820,
-						      &link_status);
+					   ext_phy_type,
+					   ext_phy_addr,
+					   MDIO_PMA_DEVAD,
+					   MDIO_PMA_REG_8073_SPEED_LINK_STATUS,
+					   &link_status);
 
 				/* Bits 0..2 --> speed detected,
 				   bits 13..15--> link is down */
@@ -3875,17 +3876,17 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 			} else {
 				/* See if 1G link is up for the 8072 */
 				bnx2x_cl45_read(bp, params->port,
-						      ext_phy_type,
-						      ext_phy_addr,
-						      MDIO_AN_DEVAD,
-						      0x8304,
-						      &an1000_status);
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_LINK_STATUS,
+					      &an1000_status);
 				bnx2x_cl45_read(bp, params->port,
-						      ext_phy_type,
-						      ext_phy_addr,
-						      MDIO_AN_DEVAD,
-						      0x8304,
-						      &an1000_status);
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_LINK_STATUS,
+					      &an1000_status);
 				if (an1000_status & (1<<1)) {
 					ext_phy_link_up = 1;
 					vars->line_speed = SPEED_1000;