diff options
| author |   Pankaj Bansal <pankaj.bansal@nxp.com> | 2018-08-13 23:50:48 +0530 |
|---|---|---|
| committer |   Marc Kleine-Budde <mkl@pengutronix.de> | 2018-11-28 16:51:44 +0100 |
| commit | 7ad0f53a394ba829e45682c2e21175791e36b649 (patch) | |
| tree | 0724400a656337339c6e87fc79ad079d5075e1d4 /drivers/net/can/flexcan.c | |
| parent | can: flexcan: add self wakeup support (diff) | |
| download | linux-dev-7ad0f53a394ba829e45682c2e21175791e36b649.tar.xz linux-dev-7ad0f53a394ba829e45682c2e21175791e36b649.zip | |
can: flexcan: flexcan_chip_start(): enable loopback mode in flexcan
Self reception disable bit needs to be cleared for loopback mode to work
in flexcan.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'drivers/net/can/flexcan.c')
| -rw-r--r-- | drivers/net/can/flexcan.c | 22 |
1 files changed, 19 insertions, 3 deletions
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index cfdeb5bc77b7..f16668b8dd61 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -995,7 +995,6 @@ static int flexcan_chip_start(struct net_device *dev) * halt now * only supervisor access * enable warning int - * disable local echo * enable individual RX masking * choose format C * set max mailbox number @@ -1003,8 +1002,8 @@ static int flexcan_chip_start(struct net_device *dev) reg_mcr = priv->read(®s->mcr); reg_mcr &= ~FLEXCAN_MCR_MAXMB(0xff); reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT | FLEXCAN_MCR_SUPV | - FLEXCAN_MCR_WRN_EN | FLEXCAN_MCR_SRX_DIS | FLEXCAN_MCR_IRMQ | - FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_MAXMB(FLEXCAN_TX_MB); + FLEXCAN_MCR_WRN_EN | FLEXCAN_MCR_IRMQ | FLEXCAN_MCR_IDAM_C | + FLEXCAN_MCR_MAXMB(FLEXCAN_TX_MB); /* MCR * @@ -1017,6 +1016,23 @@ static int flexcan_chip_start(struct net_device *dev) else reg_mcr |= FLEXCAN_MCR_FEN; + /* MCR + * + * NOTE: In loopback mode, the CAN_MCR[SRXDIS] cannot be + * asserted because this will impede the self reception + * of a transmitted message. This is not documented in + * earlier versions of flexcan block guide. + * + * Self Reception: + * - enable Self Reception for loopback mode + * (by clearing "Self Reception Disable" bit) + * - disable for normal operation + */ + if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) + reg_mcr &= ~FLEXCAN_MCR_SRX_DIS; + else + reg_mcr |= FLEXCAN_MCR_SRX_DIS; + netdev_dbg(dev, "%s: writing mcr=0x%08x", __func__, reg_mcr); priv->write(reg_mcr, ®s->mcr); |