diff options
| author |   Marc Kleine-Budde <mkl@pengutronix.de> | 2019-07-24 14:16:29 +0200 |
|---|---|---|
| committer | Marc Kleine-Budde <mkl@pengutronix.de> | 2019-08-13 16:37:03 +0200 |
| commit | 99a3d7c122431c625d368fb959aa0de5fa94a85b (patch) | |
| tree | 5eb41846608f204fb442b6bf6d7087447a79298a /drivers/net/can | |
| parent | can: sja1000: f81601: remove unused including <linux/version.h> (diff) | |
| download | linux-dev-99a3d7c122431c625d368fb959aa0de5fa94a85b.tar.xz linux-dev-99a3d7c122431c625d368fb959aa0de5fa94a85b.zip | |
can: ti_hecc: convert block comments to network style comments
This patch converts all block comments to network subsystem style block
comments.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'drivers/net/can')
| -rw-r--r-- | drivers/net/can/ti_hecc.c | 21 |
1 files changed, 7 insertions, 14 deletions
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index b62f75fa03f0..0448b9a78ed2 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -46,8 +46,7 @@ MODULE_VERSION(HECC_MODULE_VERSION); #define HECC_MAX_MAILBOXES 32 /* hardware mailboxes - do not change */ #define MAX_TX_PRIO 0x3F /* hardware value - do not change */ -/* - * Important Note: TX mailbox configuration +/* Important Note: TX mailbox configuration * TX mailboxes should be restricted to the number of SKB buffers to avoid * maintaining SKB buffers separately. TX mailboxes should be a power of 2 * for the mailbox logic to work. Top mailbox numbers are reserved for RX @@ -309,8 +308,7 @@ static void ti_hecc_reset(struct net_device *ndev) /* Set change control request and wait till enabled */ hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_CCR); - /* - * INFO: It has been observed that at times CCE bit may not be + /* INFO: It has been observed that at times CCE bit may not be * set and hw seems to be ok even if this bit is not set so * timing out with a timing of 1ms to respect the specs */ @@ -320,8 +318,7 @@ static void ti_hecc_reset(struct net_device *ndev) udelay(10); } - /* - * Note: On HECC, BTC can be programmed only in initialization mode, so + /* Note: On HECC, BTC can be programmed only in initialization mode, so * it is expected that the can bittiming parameters are set via ip * utility before the device is opened */ @@ -330,13 +327,11 @@ static void ti_hecc_reset(struct net_device *ndev) /* Clear CCR (and CANMC register) and wait for CCE = 0 enable */ hecc_write(priv, HECC_CANMC, 0); - /* - * INFO: CAN net stack handles bus off and hence disabling auto-bus-on + /* INFO: CAN net stack handles bus off and hence disabling auto-bus-on * hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_ABO); */ - /* - * INFO: It has been observed that at times CCE bit may not be + /* INFO: It has been observed that at times CCE bit may not be * set and hw seems to be ok even if this bit is not set so */ cnt = HECC_CCE_WAIT_COUNT; @@ -439,8 +434,7 @@ static int ti_hecc_get_berr_counter(const struct net_device *ndev, return 0; } -/* - * ti_hecc_xmit: HECC Transmit +/* ti_hecc_xmit: HECC Transmit * * The transmit mailboxes start from 0 to HECC_MAX_TX_MBOX. In HECC the * priority of the mailbox for tranmission is dependent upon priority setting @@ -601,8 +595,7 @@ static int ti_hecc_error(struct net_device *ndev, int int_status, hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_CCR); } - /* - * Need to check busoff condition in error status register too to + /* Need to check busoff condition in error status register too to * ensure warning interrupts don't hog the system */ if ((int_status & HECC_CANGIF_BOIF) || (err_status & HECC_CANES_BO)) { |