aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/lantiq_gswip.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-05-07 22:03:58 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2019-05-07 22:03:58 -0700
commit80f232121b69cc69a31ccb2b38c1665d770b0710 (patch)
tree106263eac4ff03b899df695e00dd11e593e74fe2 /drivers/net/dsa/lantiq_gswip.c
parentMerge tag 'devicetree-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux (diff)
parentMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net (diff)
downloadlinux-dev-80f232121b69cc69a31ccb2b38c1665d770b0710.tar.xz
linux-dev-80f232121b69cc69a31ccb2b38c1665d770b0710.zip
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
Diffstat (limited to 'drivers/net/dsa/lantiq_gswip.c')
-rw-r--r--drivers/net/dsa/lantiq_gswip.c812
1 files changed, 803 insertions, 9 deletions
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index d8328866908c..553831df58fe 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -4,7 +4,25 @@
*
* Copyright (C) 2010 Lantiq Deutschland
* Copyright (C) 2012 John Crispin <john@phrozen.org>
- * Copyright (C) 2017 - 2018 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright (C) 2017 - 2019 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * The VLAN and bridge model the GSWIP hardware uses does not directly
+ * matches the model DSA uses.
+ *
+ * The hardware has 64 possible table entries for bridges with one VLAN
+ * ID, one flow id and a list of ports for each bridge. All entries which
+ * match the same flow ID are combined in the mac learning table, they
+ * act as one global bridge.
+ * The hardware does not support VLAN filter on the port, but on the
+ * bridge, this driver converts the DSA model to the hardware.
+ *
+ * The CPU gets all the exception frames which do not match any forwarding
+ * rule and the CPU port is also added to all bridges. This makes it possible
+ * to handle all the special cases easily in software.
+ * At the initialization the driver allocates one bridge table entry for
+ * each switch port which is used when the port is used without an
+ * explicit bridge. This prevents the frames from being forwarded
+ * between all LAN ports by default.
*/
#include <linux/clk.h>
@@ -148,19 +166,29 @@
#define GSWIP_PCE_PMAP2 0x454 /* Default Multicast port map */
#define GSWIP_PCE_PMAP3 0x455 /* Default Unknown Unicast port map */
#define GSWIP_PCE_GCTRL_0 0x456
+#define GSWIP_PCE_GCTRL_0_MTFL BIT(0) /* MAC Table Flushing */
#define GSWIP_PCE_GCTRL_0_MC_VALID BIT(3)
#define GSWIP_PCE_GCTRL_0_VLAN BIT(14) /* VLAN aware Switching */
#define GSWIP_PCE_GCTRL_1 0x457
#define GSWIP_PCE_GCTRL_1_MAC_GLOCK BIT(2) /* MAC Address table lock */
#define GSWIP_PCE_GCTRL_1_MAC_GLOCK_MOD BIT(3) /* Mac address table lock forwarding mode */
#define GSWIP_PCE_PCTRL_0p(p) (0x480 + ((p) * 0xA))
-#define GSWIP_PCE_PCTRL_0_INGRESS BIT(11)
+#define GSWIP_PCE_PCTRL_0_TVM BIT(5) /* Transparent VLAN mode */
+#define GSWIP_PCE_PCTRL_0_VREP BIT(6) /* VLAN Replace Mode */
+#define GSWIP_PCE_PCTRL_0_INGRESS BIT(11) /* Accept special tag in ingress */
#define GSWIP_PCE_PCTRL_0_PSTATE_LISTEN 0x0
#define GSWIP_PCE_PCTRL_0_PSTATE_RX 0x1
#define GSWIP_PCE_PCTRL_0_PSTATE_TX 0x2
#define GSWIP_PCE_PCTRL_0_PSTATE_LEARNING 0x3
#define GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING 0x7
#define GSWIP_PCE_PCTRL_0_PSTATE_MASK GENMASK(2, 0)
+#define GSWIP_PCE_VCTRL(p) (0x485 + ((p) * 0xA))
+#define GSWIP_PCE_VCTRL_UVR BIT(0) /* Unknown VLAN Rule */
+#define GSWIP_PCE_VCTRL_VIMR BIT(3) /* VLAN Ingress Member violation rule */
+#define GSWIP_PCE_VCTRL_VEMR BIT(4) /* VLAN Egress Member violation rule */
+#define GSWIP_PCE_VCTRL_VSR BIT(5) /* VLAN Security */
+#define GSWIP_PCE_VCTRL_VID0 BIT(6) /* Priority Tagged Rule */
+#define GSWIP_PCE_DEFPVID(p) (0x486 + ((p) * 0xA))
#define GSWIP_MAC_FLEN 0x8C5
#define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC))
@@ -183,6 +211,11 @@
#define GSWIP_SDMA_PCTRL_FCEN BIT(1) /* Flow Control Enable */
#define GSWIP_SDMA_PCTRL_PAUFWD BIT(1) /* Pause Frame Forwarding */
+#define GSWIP_TABLE_ACTIVE_VLAN 0x01
+#define GSWIP_TABLE_VLAN_MAPPING 0x02
+#define GSWIP_TABLE_MAC_BRIDGE 0x0b
+#define GSWIP_TABLE_MAC_BRIDGE_STATIC 0x01 /* Static not, aging entry */
+
#define XRX200_GPHY_FW_ALIGN (16 * 1024)
struct gswip_hw_info {
@@ -202,6 +235,12 @@ struct gswip_gphy_fw {
char *fw_name;
};
+struct gswip_vlan {
+ struct net_device *bridge;
+ u16 vid;
+ u8 fid;
+};
+
struct gswip_priv {
__iomem void *gswip;
__iomem void *mdio;
@@ -211,8 +250,22 @@ struct gswip_priv {
struct dsa_switch *ds;
struct device *dev;
struct regmap *rcu_regmap;
+ struct gswip_vlan vlans[64];
int num_gphy_fw;
struct gswip_gphy_fw *gphy_fw;
+ u32 port_vlan_filter;
+};
+
+struct gswip_pce_table_entry {
+ u16 index; // PCE_TBL_ADDR.ADDR = pData->table_index
+ u16 table; // PCE_TBL_CTRL.ADDR = pData->table
+ u16 key[8];
+ u16 val[5];
+ u16 mask;
+ u8 gmap;
+ bool type;
+ bool valid;
+ bool key_mode;
};
struct gswip_rmon_cnt_desc {
@@ -447,10 +500,153 @@ static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np)
return of_mdiobus_register(ds->slave_mii_bus, mdio_np);
}
+static int gswip_pce_table_entry_read(struct gswip_priv *priv,
+ struct gswip_pce_table_entry *tbl)
+{
+ int i;
+ int err;
+ u16 crtl;
+ u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSRD :
+ GSWIP_PCE_TBL_CTRL_OPMOD_ADRD;
+
+ err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
+ GSWIP_PCE_TBL_CTRL_BAS);
+ if (err)
+ return err;
+
+ gswip_switch_w(priv, tbl->index, GSWIP_PCE_TBL_ADDR);
+ gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK |
+ GSWIP_PCE_TBL_CTRL_OPMOD_MASK,
+ tbl->table | addr_mode | GSWIP_PCE_TBL_CTRL_BAS,
+ GSWIP_PCE_TBL_CTRL);
+
+ err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
+ GSWIP_PCE_TBL_CTRL_BAS);
+ if (err)
+ return err;
+
+ for (i = 0; i < ARRAY_SIZE(tbl->key); i++)
+ tbl->key[i] = gswip_switch_r(priv, GSWIP_PCE_TBL_KEY(i));
+
+ for (i = 0; i < ARRAY_SIZE(tbl->val); i++)
+ tbl->val[i] = gswip_switch_r(priv, GSWIP_PCE_TBL_VAL(i));
+
+ tbl->mask = gswip_switch_r(priv, GSWIP_PCE_TBL_MASK);
+
+ crtl = gswip_switch_r(priv, GSWIP_PCE_TBL_CTRL);
+
+ tbl->type = !!(crtl & GSWIP_PCE_TBL_CTRL_TYPE);
+ tbl->valid = !!(crtl & GSWIP_PCE_TBL_CTRL_VLD);
+ tbl->gmap = (crtl & GSWIP_PCE_TBL_CTRL_GMAP_MASK) >> 7;
+
+ return 0;
+}
+
+static int gswip_pce_table_entry_write(struct gswip_priv *priv,
+ struct gswip_pce_table_entry *tbl)
+{
+ int i;
+ int err;
+ u16 crtl;
+ u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSWR :
+ GSWIP_PCE_TBL_CTRL_OPMOD_ADWR;
+
+ err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
+ GSWIP_PCE_TBL_CTRL_BAS);
+ if (err)
+ return err;
+
+ gswip_switch_w(priv, tbl->index, GSWIP_PCE_TBL_ADDR);
+ gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK |
+ GSWIP_PCE_TBL_CTRL_OPMOD_MASK,
+ tbl->table | addr_mode,
+ GSWIP_PCE_TBL_CTRL);
+
+ for (i = 0; i < ARRAY_SIZE(tbl->key); i++)
+ gswip_switch_w(priv, tbl->key[i], GSWIP_PCE_TBL_KEY(i));
+
+ for (i = 0; i < ARRAY_SIZE(tbl->val); i++)
+ gswip_switch_w(priv, tbl->val[i], GSWIP_PCE_TBL_VAL(i));
+
+ gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK |
+ GSWIP_PCE_TBL_CTRL_OPMOD_MASK,
+ tbl->table | addr_mode,
+ GSWIP_PCE_TBL_CTRL);
+
+ gswip_switch_w(priv, tbl->mask, GSWIP_PCE_TBL_MASK);
+
+ crtl = gswip_switch_r(priv, GSWIP_PCE_TBL_CTRL);
+ crtl &= ~(GSWIP_PCE_TBL_CTRL_TYPE | GSWIP_PCE_TBL_CTRL_VLD |
+ GSWIP_PCE_TBL_CTRL_GMAP_MASK);
+ if (tbl->type)
+ crtl |= GSWIP_PCE_TBL_CTRL_TYPE;
+ if (tbl->valid)
+ crtl |= GSWIP_PCE_TBL_CTRL_VLD;
+ crtl |= (tbl->gmap << 7) & GSWIP_PCE_TBL_CTRL_GMAP_MASK;
+ crtl |= GSWIP_PCE_TBL_CTRL_BAS;
+ gswip_switch_w(priv, crtl, GSWIP_PCE_TBL_CTRL);
+
+ return gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
+ GSWIP_PCE_TBL_CTRL_BAS);
+}
+
+/* Add the LAN port into a bridge with the CPU port by
+ * default. This prevents automatic forwarding of
+ * packages between the LAN ports when no explicit
+ * bridge is configured.
+ */
+static int gswip_add_single_port_br(struct gswip_priv *priv, int port, bool add)
+{
+ struct gswip_pce_table_entry vlan_active = {0,};
+ struct gswip_pce_table_entry vlan_mapping = {0,};
+ unsigned int cpu_port = priv->hw_info->cpu_port;
+ unsigned int max_ports = priv->hw_info->max_ports;
+ int err;
+
+ if (port >= max_ports) {
+ dev_err(priv->dev, "single port for %i supported\n", port);
+ return -EIO;
+ }
+
+ vlan_active.index = port + 1;
+ vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN;
+ vlan_active.key[0] = 0; /* vid */
+ vlan_active.val[0] = port + 1 /* fid */;
+ vlan_active.valid = add;
+ err = gswip_pce_table_entry_write(priv, &vlan_active);
+ if (err) {
+ dev_err(priv->dev, "failed to write active VLAN: %d\n", err);
+ return err;
+ }
+
+ if (!add)
+ return 0;
+
+ vlan_mapping.index = port + 1;
+ vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING;
+ vlan_mapping.val[0] = 0 /* vid */;
+ vlan_mapping.val[1] = BIT(port) | BIT(cpu_port);
+ vlan_mapping.val[2] = 0;
+ err = gswip_pce_table_entry_write(priv, &vlan_mapping);
+ if (err) {
+ dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
static int gswip_port_enable(struct dsa_switch *ds, int port,
struct phy_device *phydev)
{
struct gswip_priv *priv = ds->priv;
+ int err;
+
+ if (!dsa_is_cpu_port(ds, port)) {
+ err = gswip_add_single_port_br(priv, port, true);
+ if (err)
+ return err;
+ }
/* RMON Counter Enable for port */
gswip_switch_w(priv, GSWIP_BM_PCFG_CNTEN, GSWIP_BM_PCFGp(port));
@@ -461,8 +657,6 @@ static int gswip_port_enable(struct dsa_switch *ds, int port,
GSWIP_FDMA_PCTRLp(port));
gswip_switch_mask(priv, 0, GSWIP_SDMA_PCTRL_EN,
GSWIP_SDMA_PCTRLp(port));
- gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS,
- GSWIP_PCE_PCTRL_0p(port));
if (!dsa_is_cpu_port(ds, port)) {
u32 macconf = GSWIP_MDIO_PHY_LINK_AUTO |
@@ -535,6 +729,39 @@ static int gswip_pce_load_microcode(struct gswip_priv *priv)
return 0;
}
+static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port,
+ bool vlan_filtering)
+{
+ struct gswip_priv *priv = ds->priv;
+ struct net_device *bridge = dsa_to_port(ds, port)->bridge_dev;
+
+ /* Do not allow changing the VLAN filtering options while in bridge */
+ if (!!(priv->port_vlan_filter & BIT(port)) != vlan_filtering && bridge)
+ return -EIO;
+
+ if (vlan_filtering) {
+ /* Use port based VLAN tag */
+ gswip_switch_mask(priv,
+ GSWIP_PCE_VCTRL_VSR,
+ GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR |
+ GSWIP_PCE_VCTRL_VEMR,
+ GSWIP_PCE_VCTRL(port));
+ gswip_switch_mask(priv, GSWIP_PCE_PCTRL_0_TVM, 0,
+ GSWIP_PCE_PCTRL_0p(port));
+ } else {
+ /* Use port based VLAN tag */
+ gswip_switch_mask(priv,
+ GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR |
+ GSWIP_PCE_VCTRL_VEMR,
+ GSWIP_PCE_VCTRL_VSR,
+ GSWIP_PCE_VCTRL(port));
+ gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_TVM,
+ GSWIP_PCE_PCTRL_0p(port));
+ }
+
+ return 0;
+}
+
static int gswip_setup(struct dsa_switch *ds)
{
struct gswip_priv *priv = ds->priv;
@@ -547,8 +774,10 @@ static int gswip_setup(struct dsa_switch *ds)
gswip_switch_w(priv, 0, GSWIP_SWRES);
/* disable port fetch/store dma on all ports */
- for (i = 0; i < priv->hw_info->max_ports; i++)
+ for (i = 0; i < priv->hw_info->max_ports; i++) {
gswip_port_disable(ds, i);
+ gswip_port_vlan_filtering(ds, i, false);
+ }
/* enable Switch */
gswip_mdio_mask(priv, 0, GSWIP_MDIO_GLOB_ENABLE, GSWIP_MDIO_GLOB);
@@ -578,6 +807,10 @@ static int gswip_setup(struct dsa_switch *ds)
gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN,
GSWIP_FDMA_PCTRLp(cpu_port));
+ /* accept special tag in ingress direction */
+ gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS,
+ GSWIP_PCE_PCTRL_0p(cpu_port));
+
gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN,
GSWIP_MAC_CTRL_2p(cpu_port));
gswip_switch_w(priv, VLAN_ETH_FRAME_LEN + 8, GSWIP_MAC_FLEN);
@@ -587,10 +820,15 @@ static int gswip_setup(struct dsa_switch *ds)
/* VLAN aware Switching */
gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_0_VLAN, GSWIP_PCE_GCTRL_0);
- /* Mac Address Table Lock */
- gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_1_MAC_GLOCK |
- GSWIP_PCE_GCTRL_1_MAC_GLOCK_MOD,
- GSWIP_PCE_GCTRL_1);
+ /* Flush MAC Table */
+ gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_0_MTFL, GSWIP_PCE_GCTRL_0);
+
+ err = gswip_switch_r_timeout(priv, GSWIP_PCE_GCTRL_0,
+ GSWIP_PCE_GCTRL_0_MTFL);
+ if (err) {
+ dev_err(priv->dev, "MAC flushing didn't finish\n");
+ return err;
+ }
gswip_port_enable(ds, cpu_port, NULL);
return 0;
@@ -602,6 +840,551 @@ static enum dsa_tag_protocol gswip_get_tag_protocol(struct dsa_switch *ds,
return DSA_TAG_PROTO_GSWIP;
}
+static int gswip_vlan_active_create(struct gswip_priv *priv,
+ struct net_device *bridge,
+ int fid, u16 vid)
+{
+ struct gswip_pce_table_entry vlan_active = {0,};
+ unsigned int max_ports = priv->hw_info->max_ports;
+ int idx = -1;
+ int err;
+ int i;
+
+ /* Look for a free slot */
+ for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) {
+ if (!priv->vlans[i].bridge) {
+ idx = i;
+ break;
+ }
+ }
+
+ if (idx == -1)
+ return -ENOSPC;
+
+ if (fid == -1)
+ fid = idx;
+
+ vlan_active.index = idx;
+ vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN;
+ vlan_active.key[0] = vid;
+ vlan_active.val[0] = fid;
+ vlan_active.valid = true;
+
+ err = gswip_pce_table_entry_write(priv, &vlan_active);
+ if (err) {
+ dev_err(priv->dev, "failed to write active VLAN: %d\n", err);
+ return err;
+ }
+
+ priv->vlans[idx].bridge = bridge;
+ priv->vlans[idx].vid = vid;
+ priv->vlans[idx].fid = fid;
+
+ return idx;
+}
+
+static int gswip_vlan_active_remove(struct gswip_priv *priv, int idx)
+{
+ struct gswip_pce_table_entry vlan_active = {0,};
+ int err;
+
+ vlan_active.index = idx;
+ vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN;
+ vlan_active.valid = false;
+ err = gswip_pce_table_entry_write(priv, &vlan_active);
+ if (err)
+ dev_err(priv->dev, "failed to delete active VLAN: %d\n", err);
+ priv->vlans[idx].bridge = NULL;
+
+ return err;
+}
+
+static int gswip_vlan_add_unaware(struct gswip_priv *priv,
+ struct net_device *bridge, int port)
+{
+ struct gswip_pce_table_entry vlan_mapping = {0,};
+ unsigned int max_ports = priv->hw_info->max_ports;
+ unsigned int cpu_port = priv->hw_info->cpu_port;
+ bool active_vlan_created = false;
+ int idx = -1;
+ int i;
+ int err;
+
+ /* Check if there is already a page for this bridge */
+ for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) {
+ if (priv->vlans[i].bridge == bridge) {
+ idx = i;
+ break;
+ }
+ }
+
+ /* If this bridge is not programmed yet, add a Active VLAN table
+ * entry in a free slot and prepare the VLAN mapping table entry.
+ */
+ if (idx == -1) {
+ idx = gswip_vlan_active_create(priv, bridge, -1, 0);
+ if (idx < 0)
+ return idx;
+ active_vlan_created = true;
+
+ vlan_mapping.index = idx;
+ vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING;
+ /* VLAN ID byte, maps to the VLAN ID of vlan active table */
+ vlan_mapping.val[0] = 0;
+ } else {
+ /* Read the existing VLAN mapping entry from the switch */
+ vlan_mapping.index = idx;
+ vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING;
+ err = gswip_pce_table_entry_read(priv, &vlan_mapping);
+ if (err) {
+ dev_err(priv->dev, "failed to read VLAN mapping: %d\n",
+ err);
+ return err;
+ }
+ }
+
+ /* Update the VLAN mapping entry and write it to the switch */
+ vlan_mapping.val[1] |= BIT(cpu_port);
+ vlan_mapping.val[1] |= BIT(port);
+ err = gswip_pce_table_entry_write(priv, &vlan_mapping);
+ if (err) {
+ dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err);
+ /* In case an Active VLAN was creaetd delete it again */
+ if (active_vlan_created)
+ gswip_vlan_active_remove(priv, idx);
+ return err;
+ }
+
+ gswip_switch_w(priv, 0, GSWIP_PCE_DEFPVID(port));
+ return 0;
+}
+
+static int gswip_vlan_add_aware(struct gswip_priv *priv,
+ struct net_device *bridge, int port,
+ u16 vid, bool untagged,
+ bool pvid)
+{
+ struct gswip_pce_table_entry vlan_mapping = {0,};
+ unsigned int max_ports = priv->hw_info->max_ports;
+ unsigned int cpu_port = priv->hw_info->cpu_port;
+ bool active_vlan_created = false;
+ int idx = -1;
+ int fid = -1;
+ int i;
+ int err;
+
+ /* Check if there is already a page for this bridge */
+ for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) {
+ if (priv->vlans[i].bridge == bridge) {
+ if (fid != -1 && fid != priv->vlans[i].fid)
+ dev_err(priv->dev, "one bridge with multiple flow ids\n");
+ fid = priv->vlans[i].fid;
+ if (priv->vlans[i].vid == vid) {
+ idx = i;
+ break;
+ }
+ }
+ }
+
+ /* If this bridge is not programmed yet, add a Active VLAN table
+ * entry in a free slot and prepare the VLAN mapping table entry.
+ */
+ if (idx == -1) {
+ idx = gswip_vlan_active_create(priv, bridge, fid, vid);
+ if (idx < 0)
+ return idx;
+ active_vlan_created = true;
+
+ vlan_mapping.index = idx;
+ vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING;
+ /* VLAN ID byte, maps to the VLAN ID of vlan active table */
+ vlan_mapping.val[0] = vid;
+ } else {
+ /* Read the existing VLAN mapping entry from the switch */
+ vlan_mapping.index = idx;
+ vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING;
+ err = gswip_pce_table_entry_read(priv, &vlan_mapping);
+ if (err) {
+ dev_err(priv->dev, "failed to read VLAN mapping: %d\n",
+ err);
+ return err;
+ }
+ }
+
+ vlan_mapping.val[0] = vid;
+ /* Update the VLAN mapping entry and write it to the switch */
+ vlan_mapping.val[1] |= BIT(cpu_port);
+ vlan_mapping.val[2] |= BIT(cpu_port);
+ vlan_mapping.val[1] |= BIT(port);
+ if (untagged)
+ vlan_mapping.val[2] &= ~BIT(port);
+ else
+ vlan_mapping.val[2] |= BIT(port);
+ err = gswip_pce_table_entry_write(priv, &vlan_mapping);
+ if (err) {
+ dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err);
+ /* In case an Active VLAN was creaetd delete it again */
+ if (active_vlan_created)
+ gswip_vlan_active_remove(priv, idx);
+ return err;
+ }
+
+ if (pvid)
+ gswip_switch_w(priv, idx, GSWIP_PCE_DEFPVID(port));
+
+ return 0;
+}
+
+static int gswip_vlan_remove(struct gswip_priv *priv,
+ struct net_device *bridge, int port,
+ u16 vid, bool pvid, bool vlan_aware)
+{
+ struct gswip_pce_table_entry vlan_mapping = {0,};
+ unsigned int max_ports = priv->hw_info->max_ports;
+ unsigned int cpu_port = priv->hw_info->cpu_port;
+ int idx = -1;
+ int i;
+ int err;
+
+ /* Check if there is already a page for this bridge */
+ for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) {
+ if (priv->vlans[i].bridge == bridge &&
+ (!vlan_aware || priv->vlans[i].vid == vid)) {
+ idx = i;
+ break;
+ }
+ }
+
+ if (idx == -1) {
+ dev_err(priv->dev, "bridge to leave does not exists\n");
+ return -ENOENT;
+ }
+
+ vlan_mapping.index = idx;
+ vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING;
+ err = gswip_pce_table_entry_read(priv, &vlan_mapping);
+ if (err) {
+ dev_err(priv->dev, "failed to read VLAN mapping: %d\n", err);
+ return err;
+ }
+
+ vlan_mapping.val[1] &= ~BIT(port);
+ vlan_mapping.val[2] &= ~BIT(port);
+ err = gswip_pce_table_entry_write(priv, &vlan_mapping);
+ if (err) {
+ dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err);
+ return err;
+ }
+
+ /* In case all ports are removed from the bridge, remove the VLAN */
+ if ((vlan_mapping.val[1] & ~BIT(cpu_port)) == 0) {
+ err = gswip_vlan_active_remove(priv, idx);
+ if (err) {
+ dev_err(priv->dev, "failed to write active VLAN: %d\n",
+ err);
+ return err;
+ }
+ }
+
+ /* GSWIP 2.2 (GRX300) and later program here the VID directly. */
+ if (pvid)
+ gswip_switch_w(priv, 0, GSWIP_PCE_DEFPVID(port));
+
+ return 0;
+}
+
+static int gswip_port_bridge_join(struct dsa_switch *ds, int port,
+ struct net_device *bridge)
+{
+ struct gswip_priv *priv = ds->priv;
+ int err;
+
+ /* When the bridge uses VLAN filtering we have to configure VLAN
+ * specific bridges. No bridge is configured here.
+ */
+ if (!br_vlan_enabled(bridge)) {
+ err = gswip_vlan_add_unaware(priv, bridge, port);
+ if (err)
+ return err;
+ priv->port_vlan_filter &= ~BIT(port);
+ } else {
+ priv->port_vlan_filter |= BIT(port);
+ }
+ return gswip_add_single_port_br(priv, port, false);
+}
+
+static void gswip_port_bridge_leave(struct dsa_switch *ds, int port,
+ struct net_device *bridge)
+{
+ struct gswip_priv *priv = ds->priv;
+
+ gswip_add_single_port_br(priv, port, true);
+
+ /* When the bridge uses VLAN filtering we have to configure VLAN
+ * specific bridges. No bridge is configured here.
+ */
+ if (!br_vlan_enabled(bridge))
+ gswip_vlan_remove(priv, bridge, port, 0, true, false);
+}
+
+static int gswip_port_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct gswip_priv *priv = ds->priv;
+ struct net_device *bridge = dsa_to_port(ds, port)->bridge_dev;
+ unsigned int max_ports = priv->hw_info->max_ports;
+ u16 vid;
+ int i;
+ int pos = max_ports;
+
+ /* We only support VLAN filtering on bridges */
+ if (!dsa_is_cpu_port(ds, port) && !bridge)
+ return -EOPNOTSUPP;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
+ int idx = -1;
+
+ /* Check if there is already a page for this VLAN */
+ for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) {
+ if (priv->vlans[i].bridge == bridge &&
+ priv->vlans[i].vid == vid) {
+ idx = i;
+ break;
+ }
+ }
+
+ /* If this VLAN is not programmed yet, we have to reserve
+ * one entry in the VLAN table. Make sure we start at the
+ * next position round.
+ */
+ if (idx == -1) {
+ /* Look for a free slot */
+ for (; pos < ARRAY_SIZE(priv->vlans); pos++) {
+ if (!priv->vlans[pos].bridge) {
+ idx = pos;
+ pos++;
+ break;
+ }
+ }
+
+ if (idx == -1)
+ return -ENOSPC;
+ }
+ }
+
+ return 0;
+}
+
+static void gswip_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct gswip_priv *priv = ds->priv;
+ struct net_device *bridge = dsa_to_port(ds, port)->bridge_dev;
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+ u16 vid;
+
+ /* We have to receive all packets on the CPU port and should not
+ * do any VLAN filtering here. This is also called with bridge
+ * NULL and then we do not know for which bridge to configure
+ * this.
+ */
+ if (dsa_is_cpu_port(ds, port))
+ return;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid)
+ gswip_vlan_add_aware(priv, bridge, port, vid, untagged, pvid);
+}
+
+static int gswip_port_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct gswip_priv *priv = ds->priv;
+ struct net_device *bridge = dsa_to_port(ds, port)->bridge_dev;
+ bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+ u16 vid;
+ int err;
+
+ /* We have to receive all packets on the CPU port and should not
+ * do any VLAN filtering here. This is also called with bridge
+ * NULL and then we do not know for which bridge to configure
+ * this.
+ */
+ if (dsa_is_cpu_port(ds, port))
+ return 0;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
+ err = gswip_vlan_remove(priv, bridge, port, vid, pvid, true);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static void gswip_port_fast_age(struct dsa_switch *ds, int port)
+{
+ struct gswip_priv *priv = ds->priv;
+ struct gswip_pce_table_entry mac_bridge = {0,};
+ int i;
+ int err;
+
+ for (i = 0; i < 2048; i++) {
+ mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE;
+ mac_bridge.index = i;
+
+ err = gswip_pce_table_entry_read(priv, &mac_bridge);
+ if (err) {
+ dev_err(priv->dev, "failed to read mac brigde: %d\n",
+ err);
+ return;
+ }
+
+ if (!mac_bridge.valid)
+ continue;
+
+ if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_STATIC)
+ continue;
+
+ if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) != port)
+ continue;
+
+ mac_bridge.valid = false;
+ err = gswip_pce_table_entry_write(priv, &mac_bridge);
+ if (err) {
+ dev_err(priv->dev, "failed to write mac brigde: %d\n",
+ err);
+ return;
+ }
+ }
+}
+
+static void gswip_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
+{
+ struct gswip_priv *priv = ds->priv;
+ u32 stp_state;
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0,
+ GSWIP_SDMA_PCTRLp(port));
+ return;
+ case BR_STATE_BLOCKING:
+ case BR_STATE_LISTENING:
+ stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LISTEN;
+ break;
+ case BR_STATE_LEARNING:
+ stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LEARNING;
+ break;
+ case BR_STATE_FORWARDING:
+ stp_state = GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING;
+ break;
+ default:
+ dev_err(priv->dev, "invalid STP state: %d\n", state);
+ return;
+ }
+
+ gswip_switch_mask(priv, 0, GSWIP_SDMA_PCTRL_EN,
+ GSWIP_SDMA_PCTRLp(port));
+ gswip_switch_mask(priv, GSWIP_PCE_PCTRL_0_PSTATE_MASK, stp_state,
+ GSWIP_PCE_PCTRL_0p(port));
+}
+
+static int gswip_port_fdb(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid, bool add)
+{
+ struct gswip_priv *priv = ds->priv;
+ struct net_device *bridge = dsa_to_port(ds, port)->bridge_dev;
+ struct gswip_pce_table_entry mac_bridge = {0,};
+ unsigned int cpu_port = priv->hw_info->cpu_port;
+ int fid = -1;
+ int i;
+ int err;
+
+ if (!bridge)
+ return -EINVAL;
+
+ for (i = cpu_port; i < ARRAY_SIZE(priv->vlans); i++) {
+ if (priv->vlans[i].bridge == bridge) {
+ fid = priv->vlans[i].fid;
+ break;
+ }
+ }
+
+ if (fid == -1) {
+ dev_err(priv->dev, "Port not part of a bridge\n");
+ return -EINVAL;
+ }
+
+ mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE;
+ mac_bridge.key_mode = true;
+ mac_bridge.key[0] = addr[5] | (addr[4] << 8);
+ mac_bridge.key[1] = addr[3] | (addr[2] << 8);
+ mac_bridge.key[2] = addr[1] | (addr[0] << 8);
+ mac_bridge.key[3] = fid;
+ mac_bridge.val[0] = add ? BIT(port) : 0; /* port map */
+ mac_bridge.val[1] = GSWIP_TABLE_MAC_BRIDGE_STATIC;
+ mac_bridge.valid = add;
+
+ err = gswip_pce_table_entry_write(priv, &mac_bridge);
+ if (err)
+ dev_err(priv->dev, "failed to write mac brigde: %d\n", err);
+
+ return err;
+}
+
+static int gswip_port_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid)
+{
+ return gswip_port_fdb(ds, port, addr, vid, true);
+}
+
+static int gswip_port_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid)
+{
+ return gswip_port_fdb(ds, port, addr, vid, false);
+}
+
+static int gswip_port_fdb_dump(struct dsa_switch *ds, int port,
+ dsa_fdb_dump_cb_t *cb, void *data)
+{
+ struct gswip_priv *priv = ds->priv;
+ struct gswip_pce_table_entry mac_bridge = {0,};
+ unsigned char addr[6];
+ int i;
+ int err;
+
+ for (i = 0; i < 2048; i++) {
+ mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE;
+ mac_bridge.index = i;
+
+ err = gswip_pce_table_entry_read(priv, &mac_bridge);
+ if (err) {
+ dev_err(priv->dev, "failed to write mac brigde: %d\n",
+ err);
+ return err;
+ }
+
+ if (!mac_bridge.valid)
+ continue;
+
+ addr[5] = mac_bridge.key[0] & 0xff;
+ addr[4] = (mac_bridge.key[0] >> 8) & 0xff;
+ addr[3] = mac_bridge.key[1] & 0xff;
+ addr[2] = (mac_bridge.key[1] >> 8) & 0xff;
+ addr[1] = mac_bridge.key[2] & 0xff;
+ addr[0] = (mac_bridge.key[2] >> 8) & 0xff;
+ if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_STATIC) {
+ if (mac_bridge.val[0] & BIT(port))
+ cb(addr, 0, true, data);
+ } else {
+ if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) == port)
+ cb(addr, 0, false, data);
+ }
+ }
+ return 0;
+}
+
static void gswip_phylink_validate(struct dsa_switch *ds, int port,
unsigned long *supported,
struct phylink_link_state *state)
@@ -809,6 +1592,17 @@ static const struct dsa_switch_ops gswip_switch_ops = {
.setup = gswip_setup,
.port_enable = gswip_port_enable,
.port_disable = gswip_port_disable,
+ .port_bridge_join = gswip_port_bridge_join,
+ .port_bridge_leave = gswip_port_bridge_leave,
+ .port_fast_age = gswip_port_fast_age,
+ .port_vlan_filtering = gswip_port_vlan_filtering,
+ .port_vlan_prepare = gswip_port_vlan_prepare,
+ .port_vlan_add = gswip_port_vlan_add,
+ .port_vlan_del = gswip_port_vlan_del,
+ .port_stp_state_set = gswip_port_stp_state_set,
+ .port_fdb_add = gswip_port_fdb_add,
+ .port_fdb_del = gswip_port_fdb_del,
+ .port_fdb_dump = gswip_port_fdb_dump,
.phylink_validate = gswip_phylink_validate,
.phylink_mac_config = gswip_phylink_mac_config,
.phylink_mac_link_down = gswip_phylink_mac_link_down,