DSA: Convert DSA comments to network-style comments

Convert DSA driver comments to network-style comments as reported by
checkpatch.pl.  Fix spelling error.

Signed-off-by: Barry Grussling <barry@grussling.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 9 insertions, 22 deletions

diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index 325391d19bad..637373cebf78 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -67,27 +67,19 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds)
 	int i;
 	int ret;
 
-	/*
-	 * Set all ports to the disabled state.
-	 */
+	/* Set all ports to the disabled state. */
 	for (i = 0; i < 6; i++) {
 		ret = REG_READ(REG_PORT(i), 0x04);
 		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
 	}
 
-	/*
-	 * Wait for transmit queues to drain.
-	 */
+	/* Wait for transmit queues to drain. */
 	msleep(2);
 
-	/*
-	 * Reset the switch.
-	 */
+	/* Reset the switch. */
 	REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
 
-	/*
-	 * Wait up to one second for reset to complete.
-	 */
+	/* Wait up to one second for reset to complete. */
 	for (i = 0; i < 1000; i++) {
 		ret = REG_READ(REG_GLOBAL, 0x00);
 		if ((ret & 0x8000) == 0x0000)
@@ -103,15 +95,13 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds)
 
 static int mv88e6060_setup_global(struct dsa_switch *ds)
 {
-	/*
-	 * Disable discarding of frames with excessive collisions,
+	/* Disable discarding of frames with excessive collisions,
 	 * set the maximum frame size to 1536 bytes, and mask all
 	 * interrupt sources.
 	 */
 	REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
 
-	/*
-	 * Enable automatic address learning, set the address
+	/* Enable automatic address learning, set the address
 	 * database size to 1024 entries, and set the default aging
 	 * time to 5 minutes.
 	 */
@@ -124,16 +114,14 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
 {
 	int addr = REG_PORT(p);
 
-	/*
-	 * Do not force flow control, disable Ingress and Egress
+	/* Do not force flow control, disable Ingress and Egress
 	 * Header tagging, disable VLAN tunneling, and set the port
 	 * state to Forwarding.  Additionally, if this is the CPU
 	 * port, enable Ingress and Egress Trailer tagging mode.
 	 */
 	REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ?  0x4103 : 0x0003);
 
-	/*
-	 * Port based VLAN map: give each port its own address
+	/* Port based VLAN map: give each port its own address
 	 * database, allow the CPU port to talk to each of the 'real'
 	 * ports, and allow each of the 'real' ports to only talk to
 	 * the CPU port.
@@ -144,8 +132,7 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
 				ds->phys_port_mask :
 				(1 << ds->dst->cpu_port)));
 
-	/*
-	 * Port Association Vector: when learning source addresses
+	/* Port Association Vector: when learning source addresses
 	 * of packets, add the address to the address database using
 	 * a port bitmap that has only the bit for this port set and
 	 * the other bits clear.