Merge tag 'net-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - eth: amt: fix possible null-ptr-deref in amt_rcv()

  Previous releases - regressions:

   - tcp: use alloc_large_system_hash() to allocate table_perturb

   - af_unix: fix a data-race in unix_dgram_peer_wake_me()

   - nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling

   - eth: ixgbe: fix unexpected VLAN rx in promisc mode on VF

  Previous releases - always broken:

   - ipv6: fix signed integer overflow in __ip6_append_data

   - netfilter:
       - nat: really support inet nat without l3 address
       - nf_tables: memleak flow rule from commit path

   - bpf: fix calling global functions from BPF_PROG_TYPE_EXT programs

   - openvswitch: fix misuse of the cached connection on tuple changes

   - nfc: nfcmrvl: fix memory leak in nfcmrvl_play_deferred

   - eth: altera: fix refcount leak in altera_tse_mdio_create

  Misc:

   - add Quentin Monnet to bpftool maintainers"

* tag 'net-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
  net: amd-xgbe: fix clang -Wformat warning
  tcp: use alloc_large_system_hash() to allocate table_perturb
  net: dsa: realtek: rtl8365mb: fix GMII caps for ports with internal PHY
  net: dsa: mv88e6xxx: correctly report serdes link failure
  net: dsa: mv88e6xxx: fix BMSR error to be consistent with others
  net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete
  net: altera: Fix refcount leak in altera_tse_mdio_create
  net: openvswitch: fix misuse of the cached connection on tuple changes
  net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag
  ip_gre: test csum_start instead of transport header
  au1000_eth: stop using virt_to_bus()
  ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg
  ipv6: Fix signed integer overflow in __ip6_append_data
  nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred
  nfc: st21nfca: fix incorrect sizing calculations in EVT_TRANSACTION
  nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling
  nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION
  net: ipv6: unexport __init-annotated seg6_hmac_init()
  net: xfrm: unexport __init-annotated xfrm4_protocol_init()
  net: mdio: unexport __init-annotated mdio_bus_init()
  ...

3 files changed, 31 insertions, 46 deletions

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 8af4def38a98..e531b93f3cb2 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -2070,8 +2070,10 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
 	for_each_available_child_of_node(gphy_fw_list_np, gphy_fw_np) {
 		err = gswip_gphy_fw_probe(priv, &priv->gphy_fw[i],
 					  gphy_fw_np, i);
-		if (err)
+		if (err) {
+			of_node_put(gphy_fw_np);
 			goto remove_gphy;
+		}
 		i++;
 	}
 
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index 7b37d45bc9fb..d94150d8f3f4 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -50,22 +50,25 @@ static int mv88e6390_serdes_write(struct mv88e6xxx_chip *chip,
 }
 
 static int mv88e6xxx_serdes_pcs_get_state(struct mv88e6xxx_chip *chip,
-					  u16 ctrl, u16 status, u16 lpa,
+					  u16 bmsr, u16 lpa, u16 status,
 					  struct phylink_link_state *state)
 {
+	state->link = false;
+
+	/* If the BMSR reports that the link had failed, report this to
+	 * phylink.
+	 */
+	if (!(bmsr & BMSR_LSTATUS))
+		return 0;
+
 	state->link = !!(status & MV88E6390_SGMII_PHY_STATUS_LINK);
+	state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
 
 	if (status & MV88E6390_SGMII_PHY_STATUS_SPD_DPL_VALID) {
 		/* The Spped and Duplex Resolved register is 1 if AN is enabled
 		 * and complete, or if AN is disabled. So with disabled AN we
-		 * still get here on link up. But we want to set an_complete
-		 * only if AN was enabled, thus we look at BMCR_ANENABLE.
-		 * (According to 802.3-2008 section 22.2.4.2.10, we should be
-		 *  able to get this same value from BMSR_ANEGCAPABLE, but tests
-		 *  show that these Marvell PHYs don't conform to this part of
-		 *  the specificaion - BMSR_ANEGCAPABLE is simply always 1.)
+		 * still get here on link up.
 		 */
-		state->an_complete = !!(ctrl & BMCR_ANENABLE);
 		state->duplex = status &
 				MV88E6390_SGMII_PHY_STATUS_DUPLEX_FULL ?
 			                         DUPLEX_FULL : DUPLEX_HALF;
@@ -191,12 +194,12 @@ int mv88e6352_serdes_pcs_config(struct mv88e6xxx_chip *chip, int port,
 int mv88e6352_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
 				   int lane, struct phylink_link_state *state)
 {
-	u16 lpa, status, ctrl;
+	u16 bmsr, lpa, status;
 	int err;
 
-	err = mv88e6352_serdes_read(chip, MII_BMCR, &ctrl);
+	err = mv88e6352_serdes_read(chip, MII_BMSR, &bmsr);
 	if (err) {
-		dev_err(chip->dev, "can't read Serdes PHY control: %d\n", err);
+		dev_err(chip->dev, "can't read Serdes PHY BMSR: %d\n", err);
 		return err;
 	}
 
@@ -212,7 +215,7 @@ int mv88e6352_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
 		return err;
 	}
 
-	return mv88e6xxx_serdes_pcs_get_state(chip, ctrl, status, lpa, state);
+	return mv88e6xxx_serdes_pcs_get_state(chip, bmsr, lpa, status, state);
 }
 
 int mv88e6352_serdes_pcs_an_restart(struct mv88e6xxx_chip *chip, int port,
@@ -918,13 +921,13 @@ int mv88e6390_serdes_pcs_config(struct mv88e6xxx_chip *chip, int port,
 static int mv88e6390_serdes_pcs_get_state_sgmii(struct mv88e6xxx_chip *chip,
 	int port, int lane, struct phylink_link_state *state)
 {
-	u16 lpa, status, ctrl;
+	u16 bmsr, lpa, status;
 	int err;
 
 	err = mv88e6390_serdes_read(chip, lane, MDIO_MMD_PHYXS,
-				    MV88E6390_SGMII_BMCR, &ctrl);
+				    MV88E6390_SGMII_BMSR, &bmsr);
 	if (err) {
-		dev_err(chip->dev, "can't read Serdes PHY control: %d\n", err);
+		dev_err(chip->dev, "can't read Serdes PHY BMSR: %d\n", err);
 		return err;
 	}
 
@@ -942,7 +945,7 @@ static int mv88e6390_serdes_pcs_get_state_sgmii(struct mv88e6xxx_chip *chip,
 		return err;
 	}
 
-	return mv88e6xxx_serdes_pcs_get_state(chip, ctrl, status, lpa, state);
+	return mv88e6xxx_serdes_pcs_get_state(chip, bmsr, lpa, status, state);
 }
 
 static int mv88e6390_serdes_pcs_get_state_10g(struct mv88e6xxx_chip *chip,
diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
index 3bb42a9f236d..769f672e9128 100644
--- a/drivers/net/dsa/realtek/rtl8365mb.c
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -955,35 +955,21 @@ static int rtl8365mb_ext_config_forcemode(struct realtek_priv *priv, int port,
 	return 0;
 }
 
-static bool rtl8365mb_phy_mode_supported(struct dsa_switch *ds, int port,
-					 phy_interface_t interface)
-{
-	int ext_int;
-
-	ext_int = rtl8365mb_extint_port_map[port];
-
-	if (ext_int < 0 &&
-	    (interface == PHY_INTERFACE_MODE_NA ||
-	     interface == PHY_INTERFACE_MODE_INTERNAL ||
-	     interface == PHY_INTERFACE_MODE_GMII))
-		/* Internal PHY */
-		return true;
-	else if ((ext_int >= 1) &&
-		 phy_interface_mode_is_rgmii(interface))
-		/* Extension MAC */
-		return true;
-
-	return false;
-}
-
 static void rtl8365mb_phylink_get_caps(struct dsa_switch *ds, int port,
 				       struct phylink_config *config)
 {
-	if (dsa_is_user_port(ds, port))
+	if (dsa_is_user_port(ds, port)) {
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
-	else if (dsa_is_cpu_port(ds, port))
+
+		/* GMII is the default interface mode for phylib, so
+		 * we have to support it for ports with integrated PHY.
+		 */
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+	} else if (dsa_is_cpu_port(ds, port)) {
 		phy_interface_set_rgmii(config->supported_interfaces);
+	}
 
 	config->mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE |
 				   MAC_10 | MAC_100 | MAC_1000FD;
@@ -996,12 +982,6 @@ static void rtl8365mb_phylink_mac_config(struct dsa_switch *ds, int port,
 	struct realtek_priv *priv = ds->priv;
 	int ret;
 
-	if (!rtl8365mb_phy_mode_supported(ds, port, state->interface)) {
-		dev_err(priv->dev, "phy mode %s is unsupported on port %d\n",
-			phy_modes(state->interface), port);
-		return;
-	}
-
 	if (mode != MLO_AN_PHY && mode != MLO_AN_FIXED) {
 		dev_err(priv->dev,
 			"port %d supports only conventional PHY or fixed-link\n",