diff options
| author |   David Decotigny <decot@google.com> | 2011-04-27 18:32:43 +0000 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2011-04-29 14:03:03 -0700 |
| commit | 14ad2513ed5b709e566a853f4b515d91c5d83311 (patch) | |
| tree | 19ce2e6deefaa0725533612df85c51b99d2513cb /drivers/net/e1000/e1000_main.c | |
| parent | tulip/de2104x: don't report different speeds depending on port type (diff) | |
| download | linux-dev-14ad2513ed5b709e566a853f4b515d91c5d83311.tar.xz linux-dev-14ad2513ed5b709e566a853f4b515d91c5d83311.zip | |
net/igb/e1000/e1000e: more robust ethtool duplex/speed configuration
This makes sure that one cannot request a 99Mbps full-duplex and get a
100Mbps half-duplex configuration in return due to the way the
speed/duplex parameters are handled internally.
Tested: e1000 works
Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/e1000/e1000_main.c')
| -rw-r--r-- | drivers/net/e1000/e1000_main.c | 42 |
1 files changed, 24 insertions, 18 deletions
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 477e066a1cf0..c18cb8e883dd 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -96,7 +96,6 @@ int e1000_up(struct e1000_adapter *adapter); void e1000_down(struct e1000_adapter *adapter); void e1000_reinit_locked(struct e1000_adapter *adapter); void e1000_reset(struct e1000_adapter *adapter); -int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx); int e1000_setup_all_tx_resources(struct e1000_adapter *adapter); int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); void e1000_free_all_tx_resources(struct e1000_adapter *adapter); @@ -4385,7 +4384,6 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, struct mii_ioctl_data *data = if_mii(ifr); int retval; u16 mii_reg; - u16 spddplx; unsigned long flags; if (hw->media_type != e1000_media_type_copper) @@ -4424,17 +4422,18 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, hw->autoneg = 1; hw->autoneg_advertised = 0x2F; } else { + u32 speed; if (mii_reg & 0x40) - spddplx = SPEED_1000; + speed = SPEED_1000; else if (mii_reg & 0x2000) - spddplx = SPEED_100; + speed = SPEED_100; else - spddplx = SPEED_10; - spddplx += (mii_reg & 0x100) - ? DUPLEX_FULL : - DUPLEX_HALF; - retval = e1000_set_spd_dplx(adapter, - spddplx); + speed = SPEED_10; + retval = e1000_set_spd_dplx( + adapter, speed, + ((mii_reg & 0x100) + ? DUPLEX_FULL : + DUPLEX_HALF)); if (retval) return retval; } @@ -4596,20 +4595,24 @@ static void e1000_restore_vlan(struct e1000_adapter *adapter) } } -int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) +int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx) { struct e1000_hw *hw = &adapter->hw; hw->autoneg = 0; + /* Make sure dplx is at most 1 bit and lsb of speed is not set + * for the switch() below to work */ + if ((spd & 1) || (dplx & ~1)) + goto err_inval; + /* Fiber NICs only allow 1000 gbps Full duplex */ if ((hw->media_type == e1000_media_type_fiber) && - spddplx != (SPEED_1000 + DUPLEX_FULL)) { - e_err(probe, "Unsupported Speed/Duplex configuration\n"); - return -EINVAL; - } + spd != SPEED_1000 && + dplx != DUPLEX_FULL) + goto err_inval; - switch (spddplx) { + switch (spd + dplx) { case SPEED_10 + DUPLEX_HALF: hw->forced_speed_duplex = e1000_10_half; break; @@ -4628,10 +4631,13 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) break; case SPEED_1000 + DUPLEX_HALF: /* not supported */ default: - e_err(probe, "Unsupported Speed/Duplex configuration\n"); - return -EINVAL; + goto err_inval; } return 0; + +err_inval: + e_err(probe, "Unsupported Speed/Duplex configuration\n"); + return -EINVAL; } static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) |