Altera TSE: Add main and header file for Altera Ethernet Driver

This patch adds the main driver and header file for the Altera Triple
Speed Ethernet driver.

Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 486 insertions, 0 deletions

diff --git a/drivers/net/ethernet/altera/altera_tse.h b/drivers/net/ethernet/altera/altera_tse.h
new file mode 100644
index 000000000000..8feeed05de0e
--- /dev/null
+++ b/drivers/net/ethernet/altera/altera_tse.h
@@ -0,0 +1,486 @@
+/* Altera Triple-Speed Ethernet MAC driver
+ * Copyright (C) 2008-2014 Altera Corporation. All rights reserved
+ *
+ * Contributors:
+ *   Dalon Westergreen
+ *   Thomas Chou
+ *   Ian Abbott
+ *   Yuriy Kozlov
+ *   Tobias Klauser
+ *   Andriy Smolskyy
+ *   Roman Bulgakov
+ *   Dmytro Mytarchuk
+ *   Matthew Gerlach
+ *
+ * Original driver contributed by SLS.
+ * Major updates contributed by GlobalLogic
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ALTERA_TSE_H__
+#define __ALTERA_TSE_H__
+
+#define ALTERA_TSE_RESOURCE_NAME	"altera_tse"
+
+#include <linux/bitops.h>
+#include <linux/if_vlan.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+#define ALTERA_TSE_SW_RESET_WATCHDOG_CNTR	10000
+#define ALTERA_TSE_MAC_FIFO_WIDTH		4	/* TX/RX FIFO width in
+							 * bytes
+							 */
+/* Rx FIFO default settings */
+#define ALTERA_TSE_RX_SECTION_EMPTY	16
+#define ALTERA_TSE_RX_SECTION_FULL	0
+#define ALTERA_TSE_RX_ALMOST_EMPTY	8
+#define ALTERA_TSE_RX_ALMOST_FULL	8
+
+/* Tx FIFO default settings */
+#define ALTERA_TSE_TX_SECTION_EMPTY	16
+#define ALTERA_TSE_TX_SECTION_FULL	0
+#define ALTERA_TSE_TX_ALMOST_EMPTY	8
+#define ALTERA_TSE_TX_ALMOST_FULL	3
+
+/* MAC function configuration default settings */
+#define ALTERA_TSE_TX_IPG_LENGTH	12
+
+#define GET_BIT_VALUE(v, bit)		(((v) >> (bit)) & 0x1)
+
+/* MAC Command_Config Register Bit Definitions
+ */
+#define MAC_CMDCFG_TX_ENA			BIT(0)
+#define MAC_CMDCFG_RX_ENA			BIT(1)
+#define MAC_CMDCFG_XON_GEN			BIT(2)
+#define MAC_CMDCFG_ETH_SPEED			BIT(3)
+#define MAC_CMDCFG_PROMIS_EN			BIT(4)
+#define MAC_CMDCFG_PAD_EN			BIT(5)
+#define MAC_CMDCFG_CRC_FWD			BIT(6)
+#define MAC_CMDCFG_PAUSE_FWD			BIT(7)
+#define MAC_CMDCFG_PAUSE_IGNORE			BIT(8)
+#define MAC_CMDCFG_TX_ADDR_INS			BIT(9)
+#define MAC_CMDCFG_HD_ENA			BIT(10)
+#define MAC_CMDCFG_EXCESS_COL			BIT(11)
+#define MAC_CMDCFG_LATE_COL			BIT(12)
+#define MAC_CMDCFG_SW_RESET			BIT(13)
+#define MAC_CMDCFG_MHASH_SEL			BIT(14)
+#define MAC_CMDCFG_LOOP_ENA			BIT(15)
+#define MAC_CMDCFG_TX_ADDR_SEL(v)		(((v) & 0x7) << 16)
+#define MAC_CMDCFG_MAGIC_ENA			BIT(19)
+#define MAC_CMDCFG_SLEEP			BIT(20)
+#define MAC_CMDCFG_WAKEUP			BIT(21)
+#define MAC_CMDCFG_XOFF_GEN			BIT(22)
+#define MAC_CMDCFG_CNTL_FRM_ENA			BIT(23)
+#define MAC_CMDCFG_NO_LGTH_CHECK		BIT(24)
+#define MAC_CMDCFG_ENA_10			BIT(25)
+#define MAC_CMDCFG_RX_ERR_DISC			BIT(26)
+#define MAC_CMDCFG_DISABLE_READ_TIMEOUT		BIT(27)
+#define MAC_CMDCFG_CNT_RESET			BIT(31)
+
+#define MAC_CMDCFG_TX_ENA_GET(v)		GET_BIT_VALUE(v, 0)
+#define MAC_CMDCFG_RX_ENA_GET(v)		GET_BIT_VALUE(v, 1)
+#define MAC_CMDCFG_XON_GEN_GET(v)		GET_BIT_VALUE(v, 2)
+#define MAC_CMDCFG_ETH_SPEED_GET(v)		GET_BIT_VALUE(v, 3)
+#define MAC_CMDCFG_PROMIS_EN_GET(v)		GET_BIT_VALUE(v, 4)
+#define MAC_CMDCFG_PAD_EN_GET(v)		GET_BIT_VALUE(v, 5)
+#define MAC_CMDCFG_CRC_FWD_GET(v)		GET_BIT_VALUE(v, 6)
+#define MAC_CMDCFG_PAUSE_FWD_GET(v)		GET_BIT_VALUE(v, 7)
+#define MAC_CMDCFG_PAUSE_IGNORE_GET(v)		GET_BIT_VALUE(v, 8)
+#define MAC_CMDCFG_TX_ADDR_INS_GET(v)		GET_BIT_VALUE(v, 9)
+#define MAC_CMDCFG_HD_ENA_GET(v)		GET_BIT_VALUE(v, 10)
+#define MAC_CMDCFG_EXCESS_COL_GET(v)		GET_BIT_VALUE(v, 11)
+#define MAC_CMDCFG_LATE_COL_GET(v)		GET_BIT_VALUE(v, 12)
+#define MAC_CMDCFG_SW_RESET_GET(v)		GET_BIT_VALUE(v, 13)
+#define MAC_CMDCFG_MHASH_SEL_GET(v)		GET_BIT_VALUE(v, 14)
+#define MAC_CMDCFG_LOOP_ENA_GET(v)		GET_BIT_VALUE(v, 15)
+#define MAC_CMDCFG_TX_ADDR_SEL_GET(v)		(((v) >> 16) & 0x7)
+#define MAC_CMDCFG_MAGIC_ENA_GET(v)		GET_BIT_VALUE(v, 19)
+#define MAC_CMDCFG_SLEEP_GET(v)			GET_BIT_VALUE(v, 20)
+#define MAC_CMDCFG_WAKEUP_GET(v)		GET_BIT_VALUE(v, 21)
+#define MAC_CMDCFG_XOFF_GEN_GET(v)		GET_BIT_VALUE(v, 22)
+#define MAC_CMDCFG_CNTL_FRM_ENA_GET(v)		GET_BIT_VALUE(v, 23)
+#define MAC_CMDCFG_NO_LGTH_CHECK_GET(v)		GET_BIT_VALUE(v, 24)
+#define MAC_CMDCFG_ENA_10_GET(v)		GET_BIT_VALUE(v, 25)
+#define MAC_CMDCFG_RX_ERR_DISC_GET(v)		GET_BIT_VALUE(v, 26)
+#define MAC_CMDCFG_DISABLE_READ_TIMEOUT_GET(v)	GET_BIT_VALUE(v, 27)
+#define MAC_CMDCFG_CNT_RESET_GET(v)		GET_BIT_VALUE(v, 31)
+
+/* MDIO registers within MAC register Space
+ */
+struct altera_tse_mdio {
+	u32 control;	/* PHY device operation control register */
+	u32 status;	/* PHY device operation status register */
+	u32 phy_id1;	/* Bits 31:16 of PHY identifier */
+	u32 phy_id2;	/* Bits 15:0 of PHY identifier */
+	u32 auto_negotiation_advertisement;	/* Auto-negotiation
+							 * advertisement
+							 * register
+							 */
+	u32 remote_partner_base_page_ability;
+
+	u32 reg6;
+	u32 reg7;
+	u32 reg8;
+	u32 reg9;
+	u32 rega;
+	u32 regb;
+	u32 regc;
+	u32 regd;
+	u32 rege;
+	u32 regf;
+	u32 reg10;
+	u32 reg11;
+	u32 reg12;
+	u32 reg13;
+	u32 reg14;
+	u32 reg15;
+	u32 reg16;
+	u32 reg17;
+	u32 reg18;
+	u32 reg19;
+	u32 reg1a;
+	u32 reg1b;
+	u32 reg1c;
+	u32 reg1d;
+	u32 reg1e;
+	u32 reg1f;
+};
+
+/* MAC register Space. Note that some of these registers may or may not be
+ * present depending upon options chosen by the user when the core was
+ * configured and built. Please consult the Altera Triple Speed Ethernet User
+ * Guide for details.
+ */
+struct altera_tse_mac {
+	/* Bits 15:0: MegaCore function revision (0x0800). Bit 31:16: Customer
+	 * specific revision
+	 */
+	u32 megacore_revision;
+	/* Provides a memory location for user applications to test the device
+	 * memory operation.
+	 */
+	u32 scratch_pad;
+	/* The host processor uses this register to control and configure the
+	 * MAC block
+	 */
+	u32 command_config;
+	/* 32-bit primary MAC address word 0 bits 0 to 31 of the primary
+	 * MAC address
+	 */
+	u32 mac_addr_0;
+	/* 32-bit primary MAC address word 1 bits 32 to 47 of the primary
+	 * MAC address
+	 */
+	u32 mac_addr_1;
+	/* 14-bit maximum frame length. The MAC receive logic */
+	u32 frm_length;
+	/* The pause quanta is used in each pause frame sent to a remote
+	 * Ethernet device, in increments of 512 Ethernet bit times
+	 */
+	u32 pause_quanta;
+	/* 12-bit receive FIFO section-empty threshold */
+	u32 rx_section_empty;
+	/* 12-bit receive FIFO section-full threshold */
+	u32 rx_section_full;
+	/* 12-bit transmit FIFO section-empty threshold */
+	u32 tx_section_empty;
+	/* 12-bit transmit FIFO section-full threshold */
+	u32 tx_section_full;
+	/* 12-bit receive FIFO almost-empty threshold */
+	u32 rx_almost_empty;
+	/* 12-bit receive FIFO almost-full threshold */
+	u32 rx_almost_full;
+	/* 12-bit transmit FIFO almost-empty threshold */
+	u32 tx_almost_empty;
+	/* 12-bit transmit FIFO almost-full threshold */
+	u32 tx_almost_full;
+	/* MDIO address of PHY Device 0. Bits 0 to 4 hold a 5-bit PHY address */
+	u32 mdio_phy0_addr;
+	/* MDIO address of PHY Device 1. Bits 0 to 4 hold a 5-bit PHY address */
+	u32 mdio_phy1_addr;
+
+	/* Bit[15:0]—16-bit holdoff quanta */
+	u32 holdoff_quant;
+
+	/* only if 100/1000 BaseX PCS, reserved otherwise */
+	u32 reserved1[5];
+
+	/* Minimum IPG between consecutive transmit frame in terms of bytes */
+	u32 tx_ipg_length;
+
+	/* IEEE 802.3 oEntity Managed Object Support */
+
+	/* The MAC addresses */
+	u32 mac_id_1;
+	u32 mac_id_2;
+
+	/* Number of frames transmitted without error including pause frames */
+	u32 frames_transmitted_ok;
+	/* Number of frames received without error including pause frames */
+	u32 frames_received_ok;
+	/* Number of frames received with a CRC error */
+	u32 frames_check_sequence_errors;
+	/* Frame received with an alignment error */
+	u32 alignment_errors;
+	/* Sum of payload and padding octets of frames transmitted without
+	 * error
+	 */
+	u32 octets_transmitted_ok;
+	/* Sum of payload and padding octets of frames received without error */
+	u32 octets_received_ok;
+
+	/* IEEE 802.3 oPausedEntity Managed Object Support */
+
+	/* Number of transmitted pause frames */
+	u32 tx_pause_mac_ctrl_frames;
+	/* Number of Received pause frames */
+	u32 rx_pause_mac_ctrl_frames;
+
+	/* IETF MIB (MIB-II) Object Support */
+
+	/* Number of frames received with error */
+	u32 if_in_errors;
+	/* Number of frames transmitted with error */
+	u32 if_out_errors;
+	/* Number of valid received unicast frames */
+	u32 if_in_ucast_pkts;
+	/* Number of valid received multicasts frames (without pause) */
+	u32 if_in_multicast_pkts;
+	/* Number of valid received broadcast frames */
+	u32 if_in_broadcast_pkts;
+	u32 if_out_discards;
+	/* The number of valid unicast frames transmitted */
+	u32 if_out_ucast_pkts;
+	/* The number of valid multicast frames transmitted,
+	 * excluding pause frames
+	 */
+	u32 if_out_multicast_pkts;
+	u32 if_out_broadcast_pkts;
+
+	/* IETF RMON MIB Object Support */
+
+	/* Counts the number of dropped packets due to internal errors
+	 * of the MAC client.
+	 */
+	u32 ether_stats_drop_events;
+	/* Total number of bytes received. Good and bad frames. */
+	u32 ether_stats_octets;
+	/* Total number of packets received. Counts good and bad packets. */
+	u32 ether_stats_pkts;
+	/* Number of packets received with less than 64 bytes. */
+	u32 ether_stats_undersize_pkts;
+	/* The number of frames received that are longer than the
+	 * value configured in the frm_length register
+	 */
+	u32 ether_stats_oversize_pkts;
+	/* Number of received packet with 64 bytes */
+	u32 ether_stats_pkts_64_octets;
+	/* Frames (good and bad) with 65 to 127 bytes */
+	u32 ether_stats_pkts_65to127_octets;
+	/* Frames (good and bad) with 128 to 255 bytes */
+	u32 ether_stats_pkts_128to255_octets;
+	/* Frames (good and bad) with 256 to 511 bytes */
+	u32 ether_stats_pkts_256to511_octets;
+	/* Frames (good and bad) with 512 to 1023 bytes */
+	u32 ether_stats_pkts_512to1023_octets;
+	/* Frames (good and bad) with 1024 to 1518 bytes */
+	u32 ether_stats_pkts_1024to1518_octets;
+
+	/* Any frame length from 1519 to the maximum length configured in the
+	 * frm_length register, if it is greater than 1518
+	 */
+	u32 ether_stats_pkts_1519tox_octets;
+	/* Too long frames with CRC error */
+	u32 ether_stats_jabbers;
+	/* Too short frames with CRC error */
+	u32 ether_stats_fragments;
+
+	u32 reserved2;
+
+	/* FIFO control register */
+	u32 tx_cmd_stat;
+	u32 rx_cmd_stat;
+
+	/* Extended Statistics Counters */
+	u32 msb_octets_transmitted_ok;
+	u32 msb_octets_received_ok;
+	u32 msb_ether_stats_octets;
+
+	u32 reserved3;
+
+	/* Multicast address resolution table, mapped in the controller address
+	 * space
+	 */
+	u32 hash_table[64];
+
+	/* Registers 0 to 31 within PHY device 0/1 connected to the MDIO PHY
+	 * management interface
+	 */
+	struct altera_tse_mdio mdio_phy0;
+	struct altera_tse_mdio mdio_phy1;
+
+	/* 4 Supplemental MAC Addresses */
+	u32 supp_mac_addr_0_0;
+	u32 supp_mac_addr_0_1;
+	u32 supp_mac_addr_1_0;
+	u32 supp_mac_addr_1_1;
+	u32 supp_mac_addr_2_0;
+	u32 supp_mac_addr_2_1;
+	u32 supp_mac_addr_3_0;
+	u32 supp_mac_addr_3_1;
+
+	u32 reserved4[8];
+
+	/* IEEE 1588v2 Feature */
+	u32 tx_period;
+	u32 tx_adjust_fns;
+	u32 tx_adjust_ns;
+	u32 rx_period;
+	u32 rx_adjust_fns;
+	u32 rx_adjust_ns;
+
+	u32 reserved5[42];
+};
+
+/* Transmit and Receive Command Registers Bit Definitions
+ */
+#define ALTERA_TSE_TX_CMD_STAT_OMIT_CRC		BIT(17)
+#define ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16	BIT(18)
+#define ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16	BIT(25)
+
+/* Wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer
+ */
+struct tse_buffer {
+	struct list_head lh;
+	struct sk_buff *skb;
+	dma_addr_t dma_addr;
+	u32 len;
+	int mapped_as_page;
+};
+
+struct altera_tse_private;
+
+#define ALTERA_DTYPE_SGDMA 1
+#define ALTERA_DTYPE_MSGDMA 2
+
+/* standard DMA interface for SGDMA and MSGDMA */
+struct altera_dmaops {
+	int altera_dtype;
+	int dmamask;
+	void (*reset_dma)(struct altera_tse_private *);
+	void (*enable_txirq)(struct altera_tse_private *);
+	void (*enable_rxirq)(struct altera_tse_private *);
+	void (*disable_txirq)(struct altera_tse_private *);
+	void (*disable_rxirq)(struct altera_tse_private *);
+	void (*clear_txirq)(struct altera_tse_private *);
+	void (*clear_rxirq)(struct altera_tse_private *);
+	int (*tx_buffer)(struct altera_tse_private *, struct tse_buffer *);
+	u32 (*tx_completions)(struct altera_tse_private *);
+	int (*add_rx_desc)(struct altera_tse_private *, struct tse_buffer *);
+	u32 (*get_rx_status)(struct altera_tse_private *);
+	int (*init_dma)(struct altera_tse_private *);
+	void (*uninit_dma)(struct altera_tse_private *);
+};
+
+/* This structure is private to each device.
+ */
+struct altera_tse_private {
+	struct net_device *dev;
+	struct device *device;
+	struct napi_struct napi;
+
+	/* MAC address space */
+	struct altera_tse_mac __iomem *mac_dev;
+
+	/* TSE Revision */
+	u32	revision;
+
+	/* mSGDMA Rx Dispatcher address space */
+	void __iomem *rx_dma_csr;
+	void __iomem *rx_dma_desc;
+	void __iomem *rx_dma_resp;
+
+	/* mSGDMA Tx Dispatcher address space */
+	void __iomem *tx_dma_csr;
+	void __iomem *tx_dma_desc;
+
+	/* Rx buffers queue */
+	struct tse_buffer *rx_ring;
+	u32 rx_cons;
+	u32 rx_prod;
+	u32 rx_ring_size;
+	u32 rx_dma_buf_sz;
+
+	/* Tx ring buffer */
+	struct tse_buffer *tx_ring;
+	u32 tx_prod;
+	u32 tx_cons;
+	u32 tx_ring_size;
+
+	/* Interrupts */
+	u32 tx_irq;
+	u32 rx_irq;
+
+	/* RX/TX MAC FIFO configs */
+	u32 tx_fifo_depth;
+	u32 rx_fifo_depth;
+	u32 max_mtu;
+
+	/* Hash filter settings */
+	u32 hash_filter;
+	u32 added_unicast;
+
+	/* Descriptor memory info for managing SGDMA */
+	u32 txdescmem;
+	u32 rxdescmem;
+	dma_addr_t rxdescmem_busaddr;
+	dma_addr_t txdescmem_busaddr;
+	u32 txctrlreg;
+	u32 rxctrlreg;
+	dma_addr_t rxdescphys;
+	dma_addr_t txdescphys;
+
+	struct list_head txlisthd;
+	struct list_head rxlisthd;
+
+	/* MAC command_config register protection */
+	spinlock_t mac_cfg_lock;
+	/* Tx path protection */
+	spinlock_t tx_lock;
+	/* Rx DMA & interrupt control protection */
+	spinlock_t rxdma_irq_lock;
+
+	/* PHY */
+	int phy_addr;		/* PHY's MDIO address, -1 for autodetection */
+	phy_interface_t phy_iface;
+	struct mii_bus *mdio;
+	struct phy_device *phydev;
+	int oldspeed;
+	int oldduplex;
+	int oldlink;
+
+	/* ethtool msglvl option */
+	u32 msg_enable;
+
+	struct altera_dmaops *dmaops;
+};
+
+/* Function prototypes
+ */
+void altera_tse_set_ethtool_ops(struct net_device *);
+
+#endif /* __ALTERA_TSE_H__ */