net/atheros: remove __dev* attributes

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <chris.snook@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 8 insertions, 8 deletions

diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
index 623dd8635c46..7dc9766bb5ba 100644
--- a/drivers/net/ethernet/atheros/atlx/atl2.c
+++ b/drivers/net/ethernet/atheros/atlx/atl2.c
@@ -83,7 +83,7 @@ static void atl2_check_options(struct atl2_adapter *adapter);
  * Fields are initialized based on PCI device information and
  * OS network device settings (MTU size).
  */
-static int __devinit atl2_sw_init(struct atl2_adapter *adapter)
+static int atl2_sw_init(struct atl2_adapter *adapter)
 {
 	struct atl2_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
@@ -1338,7 +1338,7 @@ static const struct net_device_ops atl2_netdev_ops = {
  * The OS initialization, configuring of the adapter private structure,
  * and a hardware reset occur.
  */
-static int __devinit atl2_probe(struct pci_dev *pdev,
+static int atl2_probe(struct pci_dev *pdev,
 	const struct pci_device_id *ent)
 {
 	struct net_device *netdev;
@@ -1498,7 +1498,7 @@ err_dma:
  */
 /* FIXME: write the original MAC address back in case it was changed from a
  * BIOS-set value, as in atl1 -- CHS */
-static void __devexit atl2_remove(struct pci_dev *pdev)
+static void atl2_remove(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct atl2_adapter *adapter = netdev_priv(netdev);
@@ -1705,7 +1705,7 @@ static struct pci_driver atl2_driver = {
 	.name     = atl2_driver_name,
 	.id_table = atl2_pci_tbl,
 	.probe    = atl2_probe,
-	.remove   = __devexit_p(atl2_remove),
+	.remove   = atl2_remove,
 	/* Power Management Hooks */
 	.suspend  = atl2_suspend,
 #ifdef CONFIG_PM
@@ -2845,12 +2845,12 @@ static void atl2_force_ps(struct atl2_hw *hw)
  */
 
 #define ATL2_PARAM(X, desc) \
-    static const int __devinitconst X[ATL2_MAX_NIC + 1] = ATL2_PARAM_INIT; \
+    static const int X[ATL2_MAX_NIC + 1] = ATL2_PARAM_INIT; \
     MODULE_PARM(X, "1-" __MODULE_STRING(ATL2_MAX_NIC) "i"); \
     MODULE_PARM_DESC(X, desc);
 #else
 #define ATL2_PARAM(X, desc) \
-    static int __devinitdata X[ATL2_MAX_NIC+1] = ATL2_PARAM_INIT; \
+    static int X[ATL2_MAX_NIC+1] = ATL2_PARAM_INIT; \
     static unsigned int num_##X; \
     module_param_array_named(X, X, int, &num_##X, 0); \
     MODULE_PARM_DESC(X, desc);
@@ -2934,7 +2934,7 @@ struct atl2_option {
 	} arg;
 };
 
-static int __devinit atl2_validate_option(int *value, struct atl2_option *opt)
+static int atl2_validate_option(int *value, struct atl2_option *opt)
 {
 	int i;
 	struct atl2_opt_list *ent;
@@ -2992,7 +2992,7 @@ static int __devinit atl2_validate_option(int *value, struct atl2_option *opt)
  * value exists, a default value is used.  The final value is stored
  * in a variable in the adapter structure.
  */
-static void __devinit atl2_check_options(struct atl2_adapter *adapter)
+static void atl2_check_options(struct atl2_adapter *adapter)
 {
 	int val;
 	struct atl2_option opt;