bnx2x: Always take PHY lock

Taking PHY lock is not required on some older designs, but we are removing this
complication and always taking it since it is always required on newer designs
and does not worth the code complication on the older boards.

Taking PHY lock was initially required only on specific boards which had their
MDC/MDIO bus crossed, but since this lock is now always required, for example,
when NCSI is present, the PHY lock will always be taken.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 6 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
index 24246b9a0c59..c43259e5d4b2 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
@@ -139,8 +139,6 @@ struct bnx2x_phy {
 	u8 addr;
 	u8 def_md_devad;
 	u16 flags;
-	/* Require HW lock */
-#define FLAGS_HW_LOCK_REQUIRED		(1<<0)
 	/* No Over-Current detection */
 #define FLAGS_NOC			(1<<1)
 	/* Fan failure detection required */
@@ -423,10 +421,6 @@ int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy,
 
 void bnx2x_hw_reset_phy(struct link_params *params);
 
-/* Checks if HW lock is required for this phy/board type */
-u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base,
-			  u32 shmem2_base);
-
 /* Check swap bit and adjust PHY order */
 u32 bnx2x_phy_selection(struct link_params *params);