net: bcmgenet: Delay PHY initialization to bcmgenet_open()

We are currently doing a full PHY initialization and even starting the
pHY state machine during bcmgenet_mii_init() which is executed in the
driver's probe function. This is convenient to determine whether we can
attach to a proper PHY device but comes at the expense of spending up to
10ms per MDIO transactions (to reach the waitqueue timeout), which slows
things down.

This also creates a sitaution where we end-up attaching twice to the
PHY, which is not quite correct either.

Fix this by moving bcmgenet_mii_probe() into bcmgenet_open() and update
its error path accordingly.

Avoid printing the message "attached PHY at address 1 [...]" every time
we bring up/down the interface and remove this print since it duplicates
what the PHY driver already does for us.

Fixes: 1c1008c793fa4 ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 12 insertions, 25 deletions

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 35df947e738c..b503897a0da3 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -316,7 +316,7 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
 	return 0;
 }
 
-static int bcmgenet_mii_probe(struct net_device *dev)
+int bcmgenet_mii_probe(struct net_device *dev)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct device_node *dn = priv->pdev->dev.of_node;
@@ -334,22 +334,6 @@ static int bcmgenet_mii_probe(struct net_device *dev)
 	priv->old_pause = -1;
 
 	if (dn) {
-		if (priv->phydev) {
-			pr_info("PHY already attached\n");
-			return 0;
-		}
-
-		/* In the case of a fixed PHY, the DT node associated
-		 * to the PHY is the Ethernet MAC DT node.
-		 */
-		if (!priv->phy_dn && of_phy_is_fixed_link(dn)) {
-			ret = of_phy_register_fixed_link(dn);
-			if (ret)
-				return ret;
-
-			priv->phy_dn = of_node_get(dn);
-		}
-
 		phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup,
 					phy_flags, priv->phy_interface);
 		if (!phydev) {
@@ -391,9 +375,6 @@ static int bcmgenet_mii_probe(struct net_device *dev)
 	else
 		priv->mii_bus->irq[phydev->addr] = PHY_POLL;
 
-	pr_info("attached PHY at address %d [%s]\n",
-		phydev->addr, phydev->drv->name);
-
 	return 0;
 }
 
@@ -504,6 +485,17 @@ static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv)
 	/* Fetch the PHY phandle */
 	priv->phy_dn = of_parse_phandle(dn, "phy-handle", 0);
 
+	/* In the case of a fixed PHY, the DT node associated
+	 * to the PHY is the Ethernet MAC DT node.
+	 */
+	if (!priv->phy_dn && of_phy_is_fixed_link(dn)) {
+		ret = of_phy_register_fixed_link(dn);
+		if (ret)
+			return ret;
+
+		priv->phy_dn = of_node_get(dn);
+	}
+
 	/* Get the link mode */
 	phy_mode = of_get_phy_mode(dn);
 	priv->phy_interface = phy_mode;
@@ -623,10 +615,6 @@ int bcmgenet_mii_init(struct net_device *dev)
 
 	ret = bcmgenet_mii_bus_init(priv);
 	if (ret)
-		goto out_free;
-
-	ret = bcmgenet_mii_probe(dev);
-	if (ret)
 		goto out;
 
 	return 0;
@@ -634,7 +622,6 @@ int bcmgenet_mii_init(struct net_device *dev)
 out:
 	of_node_put(priv->phy_dn);
 	mdiobus_unregister(priv->mii_bus);
-out_free:
 	kfree(priv->mii_bus->irq);
 	mdiobus_free(priv->mii_bus);
 	return ret;