diff options
| author |   Matt Carlson <mcarlson@broadcom.com> | 2011-11-21 15:01:20 +0000 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2011-11-22 16:01:34 -0500 |
| commit | e348c5e7de4a759a94eed4d0303ba81a4939f8b9 (patch) | |
| tree | c5e9e51da7bd1f5b00e01cb999422e5d2e7dbfe8 /drivers/net/ethernet/broadcom/tg3.c | |
| parent | tg3: Restrict large prod ring cap devices (diff) | |
| download | linux-dev-e348c5e7de4a759a94eed4d0303ba81a4939f8b9.tar.xz linux-dev-e348c5e7de4a759a94eed4d0303ba81a4939f8b9.zip | |
tg3: Add MDI-X reporting
This patch adds MDI-X state reporting.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/broadcom/tg3.c')
| -rw-r--r-- | drivers/net/ethernet/broadcom/tg3.c | 24 |
1 files changed, 23 insertions, 1 deletions
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 6a25e5860ba5..0acb279dcf5c 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -3932,6 +3932,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset) current_link_up = 0; current_speed = SPEED_INVALID; current_duplex = DUPLEX_INVALID; + tp->phy_flags &= ~TG3_PHYFLG_MDIX_STATE; if (tp->phy_flags & TG3_PHYFLG_CAPACITIVE_COUPLING) { err = tg3_phy_auxctl_read(tp, @@ -4004,8 +4005,22 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset) } if (current_link_up == 1 && - tp->link_config.active_duplex == DUPLEX_FULL) + tp->link_config.active_duplex == DUPLEX_FULL) { + u32 reg, bit; + + if (tp->phy_flags & TG3_PHYFLG_IS_FET) { + reg = MII_TG3_FET_GEN_STAT; + bit = MII_TG3_FET_GEN_STAT_MDIXSTAT; + } else { + reg = MII_TG3_EXT_STAT; + bit = MII_TG3_EXT_STAT_MDIX; + } + + if (!tg3_readphy(tp, reg, &val) && (val & bit)) + tp->phy_flags |= TG3_PHYFLG_MDIX_STATE; + tg3_setup_flow_control(tp, lcl_adv, rmt_adv); + } } relink: @@ -10290,9 +10305,16 @@ static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) if (netif_running(dev)) { ethtool_cmd_speed_set(cmd, tp->link_config.active_speed); cmd->duplex = tp->link_config.active_duplex; + if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES)) { + if (tp->phy_flags & TG3_PHYFLG_MDIX_STATE) + cmd->eth_tp_mdix = ETH_TP_MDI_X; + else + cmd->eth_tp_mdix = ETH_TP_MDI; + } } else { ethtool_cmd_speed_set(cmd, SPEED_INVALID); cmd->duplex = DUPLEX_INVALID; + cmd->eth_tp_mdix = ETH_TP_MDI_INVALID; } cmd->phy_address = tp->phy_addr; cmd->transceiver = XCVR_INTERNAL; |