Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "Mostly small sets of driver fixes scattered all over the place.

   1) Mediatek driver fixes from Sean Wang.  Forward port not written
      correctly during TX map, missed handling of EPROBE_DEFER, and
      mistaken use of put_page() instead of skb_free_frag().

   2) Fix socket double-free in KCM code, from WANG Cong.

   3) QED driver fixes from Sudarsana Reddy Kalluru, including a fix for
      using the dcbx buffers before initializing them.

   4) Mellanox Switch driver fixes from Jiri Pirko, including a fix for
      double fib removals and an error handling fix in
      mlxsw_sp_module_init().

   5) Fix kernel panic when enabling LLDP in i40e driver, from Dave
      Ertman.

   6) Fix padding of TSO packets in thunderx driver, from Sunil Goutham.

   7) TCP's rcv_wup not initialized properly when using fastopen, from
      Neal Cardwell.

   8) Don't use uninitialized flow keys in flow dissector, from Gao
      Feng.

   9) Use after free in l2tp module unload, from Sabrina Dubroca.

  10) Fix interrupt registry ordering issues in smsc911x driver, from
      Jeremy Linton.

  11) Fix crashes in bonding having to do with enslaving and rx_handler,
      from Mahesh Bandewar.

  12) AF_UNIX deadlock fixes from Linus.

  13) In mlx5 driver, don't read skb->xmit_mode after it might have been
      freed from the TX reclaim path.  From Tariq Toukan.

  14) Fix a bug from 2015 in TCP Yeah where the congestion window does
      not increase, from Artem Germanov.

  15) Don't pad frames on receive in NFP driver, from Jakub Kicinski.

  16) Fix chunk fragmenting in SCTP wrt. GSO, from Marcelo Ricardo
      Leitner.

  17) Fix deletion of VRF routes, from Mark Tomlinson.

  18) Fix device refcount leak when DAD fails in ipv6, from Wei Yongjun"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (101 commits)
  net/mlx4_en: Fix panic on xmit while port is down
  net/mlx4_en: Fixes for DCBX
  net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_state()
  net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_all()
  net: ethernet: renesas: sh_eth: add POST registers for rz
  drivers: net: phy: mdio-xgene: Add hardware dependency
  dwc_eth_qos: do not register semi-initialized device
  sctp: identify chunks that need to be fragmented at IP level
  mlxsw: spectrum: Set port type before setting its address
  mlxsw: spectrum_router: Fix error path in mlxsw_sp_router_init
  nfp: don't pad frames on receive
  nfp: drop support for old firmware ABIs
  nfp: remove linux/version.h includes
  tcp: cwnd does not increase in TCP YeAH
  net/mlx5e: Fix parsing of vlan packets when updating lro header
  net/mlx5e: Fix global PFC counters replication
  net/mlx5e: Prevent casting overflow
  net/mlx5e: Move an_disable_cap bit to a new position
  net/mlx5e: Fix xmit_more counter race issue
  tcp: fastopen: avoid negative sk_forward_alloc
  ...

3 files changed, 18 insertions, 16 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 97e892511666..fa3386bb14f7 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -772,6 +772,11 @@ void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl)
 		(bp->common.bc_ver & 0xff00) >> 8,
 		(bp->common.bc_ver & 0xff));
 
+	if (pci_channel_offline(bp->pdev)) {
+		BNX2X_ERR("Cannot dump MCP info while in PCI error\n");
+		return;
+	}
+
 	val = REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER);
 	if (val == REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER))
 		BNX2X_ERR("%s" "MCP PC at 0x%x\n", lvl, val);
@@ -9415,10 +9420,16 @@ unload_error:
 	/* Release IRQs */
 	bnx2x_free_irq(bp);
 
-	/* Reset the chip */
-	rc = bnx2x_reset_hw(bp, reset_code);
-	if (rc)
-		BNX2X_ERR("HW_RESET failed\n");
+	/* Reset the chip, unless PCI function is offline. If we reach this
+	 * point following a PCI error handling, it means device is really
+	 * in a bad state and we're about to remove it, so reset the chip
+	 * is not a good idea.
+	 */
+	if (!pci_channel_offline(bp->pdev)) {
+		rc = bnx2x_reset_hw(bp, reset_code);
+		if (rc)
+			BNX2X_ERR("HW_RESET failed\n");
+	}
 
 	/* Report UNLOAD_DONE to MCP */
 	bnx2x_send_unload_done(bp, keep_link);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 2cf79100c9cb..228c964e709a 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -353,8 +353,8 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		push_len = (length + sizeof(*tx_push) + 7) / 8;
 		if (push_len > 16) {
 			__iowrite64_copy(txr->tx_doorbell, tx_push_buf, 16);
-			__iowrite64_copy(txr->tx_doorbell + 4, tx_push_buf + 1,
-					 push_len - 16);
+			__iowrite32_copy(txr->tx_doorbell + 4, tx_push_buf + 1,
+					 (push_len - 16) << 1);
 		} else {
 			__iowrite64_copy(txr->tx_doorbell, tx_push_buf,
 					 push_len);
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 659261218d9f..a2551bcd1027 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -14012,6 +14012,7 @@ static int tg3_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)
 	if ((ec->rx_coalesce_usecs > MAX_RXCOL_TICKS) ||
 	    (!ec->rx_coalesce_usecs) ||
 	    (ec->tx_coalesce_usecs > MAX_TXCOL_TICKS) ||
+	    (!ec->tx_coalesce_usecs) ||
 	    (ec->rx_max_coalesced_frames > MAX_RXMAX_FRAMES) ||
 	    (ec->tx_max_coalesced_frames > MAX_TXMAX_FRAMES) ||
 	    (ec->rx_coalesce_usecs_irq > max_rxcoal_tick_int) ||
@@ -14022,16 +14023,6 @@ static int tg3_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)
 	    (ec->stats_block_coalesce_usecs < min_stat_coal_ticks))
 		return -EINVAL;
 
-	/* No rx interrupts will be generated if both are zero */
-	if ((ec->rx_coalesce_usecs == 0) &&
-	    (ec->rx_max_coalesced_frames == 0))
-		return -EINVAL;
-
-	/* No tx interrupts will be generated if both are zero */
-	if ((ec->tx_coalesce_usecs == 0) &&
-	    (ec->tx_max_coalesced_frames == 0))
-		return -EINVAL;
-
 	/* Only copy relevant parameters, ignore all others. */
 	tp->coal.rx_coalesce_usecs = ec->rx_coalesce_usecs;
 	tp->coal.tx_coalesce_usecs = ec->tx_coalesce_usecs;