diff options
| author |   Claudiu Manoil <claudiu.manoil@nxp.com> | 2020-10-07 12:48:23 +0300 |
|---|---|---|
| committer |   Jakub Kicinski <kuba@kernel.org> | 2020-10-11 11:04:42 -0700 |
| commit | 71b77a7a27a3388c97e754a2c4e282df3f568fd7 (patch) | |
| tree | 5641a06bbb32799089c97a516742d6c06485e158 /drivers/net/ethernet/freescale/enetc/enetc.h | |
| parent | arm64: dts: fsl-ls1028a-rdb: Specify in-band mode for ENETC port 0 (diff) | |
| download | linux-dev-71b77a7a27a3388c97e754a2c4e282df3f568fd7.tar.xz linux-dev-71b77a7a27a3388c97e754a2c4e282df3f568fd7.zip | |
enetc: Migrate to PHYLINK and PCS_LYNX
This is a methodical transition of the driver from phylib
to phylink, following the guidelines from sfp-phylink.rst.
The MAC register configurations based on interface mode
were moved from the probing path to the mac_config() hook.
MAC enable and disable commands (enabling Rx and Tx paths
at MAC level) were also extracted and assigned to their
corresponding phylink hooks.
As part of the migration to phylink, the serdes configuration
from the driver was offloaded to the PCS_LYNX module,
introduced in commit 0da4c3d393e4 ("net: phy: add Lynx PCS module"),
the PCS_LYNX module being a mandatory component required to
make the enetc driver work with phylink.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.cionei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net/ethernet/freescale/enetc/enetc.h')
| -rw-r--r-- | drivers/net/ethernet/freescale/enetc/enetc.h | 9 |
1 files changed, 4 insertions, 5 deletions
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.h b/drivers/net/ethernet/freescale/enetc/enetc.h index d309803cfeb6..dd0fb0c066d7 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.h +++ b/drivers/net/ethernet/freescale/enetc/enetc.h @@ -9,7 +9,7 @@ #include <linux/skbuff.h> #include <linux/ethtool.h> #include <linux/if_vlan.h> -#include <linux/phy.h> +#include <linux/phylink.h> #include <linux/dim.h> #include "enetc_hw.h" @@ -264,8 +264,7 @@ struct enetc_ndev_priv { struct psfp_cap psfp_cap; - struct device_node *phy_node; - phy_interface_t if_mode; + struct phylink *phylink; int ic_mode; u32 tx_ictt; }; @@ -323,7 +322,7 @@ int enetc_send_cmd(struct enetc_si *si, struct enetc_cbd *cbd); #ifdef CONFIG_FSL_ENETC_QOS int enetc_setup_tc_taprio(struct net_device *ndev, void *type_data); -void enetc_sched_speed_set(struct net_device *ndev); +void enetc_sched_speed_set(struct enetc_ndev_priv *priv, int speed); int enetc_setup_tc_cbs(struct net_device *ndev, void *type_data); int enetc_setup_tc_txtime(struct net_device *ndev, void *type_data); int enetc_setup_tc_block_cb(enum tc_setup_type type, void *type_data, @@ -388,7 +387,7 @@ static inline int enetc_psfp_disable(struct enetc_ndev_priv *priv) #else #define enetc_setup_tc_taprio(ndev, type_data) -EOPNOTSUPP -#define enetc_sched_speed_set(ndev) (void)0 +#define enetc_sched_speed_set(priv, speed) (void)0 #define enetc_setup_tc_cbs(ndev, type_data) -EOPNOTSUPP #define enetc_setup_tc_txtime(ndev, type_data) -EOPNOTSUPP #define enetc_setup_tc_psfp(ndev, type_data) -EOPNOTSUPP |